From fc364a6fb6f63078eab472fbe5595599e2642901 Mon Sep 17 00:00:00 2001 From: Noah Axon Date: Thu, 21 Sep 2023 00:13:04 -0500 Subject: [PATCH] Initial commit --- .gitattributes | 2 + LICENSE | 1025 + README.md | 11 + WORLD_IR_CODES.h | 8835 +++++++++ debug.cfg | 14 + debug_custom.json | 19 + esp32.svd | 46087 ++++++++++++++++++++++++++++++++++++++++++++ m5stick-nemo.ino | 691 + tvbg.h | 49 + 9 files changed, 56733 insertions(+) create mode 100644 .gitattributes create mode 100644 LICENSE create mode 100644 README.md create mode 100644 WORLD_IR_CODES.h create mode 100644 debug.cfg create mode 100644 debug_custom.json create mode 100644 esp32.svd create mode 100644 m5stick-nemo.ino create mode 100644 tvbg.h diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..dfe0770 --- /dev/null +++ b/.gitattributes @@ -0,0 +1,2 @@ +# Auto detect text files and perform LF normalization +* text=auto diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..2b4f706 --- /dev/null +++ b/LICENSE @@ -0,0 +1,1025 @@ +This software is copyright MrARM 2020- and available under either a GPL-2 or GPL-3 license. + + + + + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. + + + + + + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + {one line to give the program's name and a brief idea of what it does.} + Copyright (C) {year} {name of author} + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + {project} Copyright (C) {year} {fullname} + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. + diff --git a/README.md b/README.md new file mode 100644 index 0000000..0d39802 --- /dev/null +++ b/README.md @@ -0,0 +1,11 @@ +# M5Stick-NEMO +M5 Stick C firmware for high-tech pranks + +## Features +* [TV B-Gone](http://www.righto.com/2010/11/improved-arduino-tv-b-gone.html) port (thanks to MrArm's [HAKRWATCH](https://github.com/MrARM/hakrwatch)) +* [AppleJuice](https://github.com/ECTO-1A/AppleJuice) With only a few device options right now +* Settings for rotation, battery, automatic dimming + +## To Do +* 24 Hour clock (in the code but disabled since there's no way to set the time) +* Time-setting menu in settings \ No newline at end of file diff --git a/WORLD_IR_CODES.h b/WORLD_IR_CODES.h new file mode 100644 index 0000000..d903073 --- /dev/null +++ b/WORLD_IR_CODES.h @@ -0,0 +1,8835 @@ +/* +Last Updated: 30 Mar. 2018 +By Anton Grimpelhuber (anton.grimpelhuber@gmail.com) +Added discrete Samsung / NECv2 power off code_eu140Code + +TV-B-Gone for Arduino version 0.001 +Ported to Arduino by Ken Shirriff, Dec 3, 2009 +http://arcfn.com + +The original code is: +TV-B-Gone Firmware version 1.2 + for use with ATtiny85v and v1.2 hardware + (c) Mitch Altman + Limor Fried 2009 + +*/ + +//Codes captured from Generation 3 TV-B-Gone by Limor Fried & Mitch Altman +//table of POWER codes + +#include "tvbg.h" + +const uint16_t code_na000Times[] = { + 60, 60, + 60, 2700, + 120, 60, + 240, 60, +}; +const uint8_t code_na000Codes[] = { + 0xE2, + 0x20, + 0x80, + 0x78, + 0x88, + 0x20, + 0x10, +}; +const struct IrCode code_na000Code = { + freq_to_timerval(38400), + 26, // # of pairs + 2, // # of bits per index + code_na000Times, + code_na000Codes +}; + +const uint16_t code_na001Times[] = { + 50, 100, + 50, 200, + 50, 800, + 400, 400, +}; +const uint8_t code_na001Codes[] = { + 0xD5, + 0x41, + 0x11, + 0x00, + 0x14, + 0x44, + 0x6D, + 0x54, + 0x11, + 0x10, + 0x01, + 0x44, + 0x45, +}; +const struct IrCode code_na001Code = { + freq_to_timerval(57143), + 52, // # of pairs + 2, // # of bits per index + code_na001Times, + code_na001Codes +}; +const uint16_t code_na002Times[] = { + 42, 46, + 42, 133, + 42, 7519, + 347, 176, + 347, 177, +}; +const uint8_t code_na002Codes[] = { + 0x60, + 0x80, + 0x00, + 0x00, + 0x00, + 0x08, + 0x00, + 0x00, + 0x00, + 0x20, + 0x00, + 0x00, + 0x04, + 0x12, + 0x48, + 0x04, + 0x12, + 0x48, + 0x2A, + 0x02, + 0x00, + 0x00, + 0x00, + 0x00, + 0x20, + 0x00, + 0x00, + 0x00, + 0x80, + 0x00, + 0x00, + 0x10, + 0x49, + 0x20, + 0x10, + 0x49, + 0x20, + 0x80, +}; +const struct IrCode code_na002Code = { + freq_to_timerval(37037), + 100, // # of pairs + 3, // # of bits per index + code_na002Times, + code_na002Codes +}; +const uint16_t code_na003Times[] = { + 26, 185, + 27, 80, + 27, 185, + 27, 4549, +}; +const uint8_t code_na003Codes[] = { + 0x15, + 0x5A, + 0x65, + 0x67, + 0x95, + 0x65, + 0x9A, + 0x9B, + 0x95, + 0x5A, + 0x65, + 0x67, + 0x95, + 0x65, + 0x9A, + 0x99, +}; +const struct IrCode code_na003Code = { + freq_to_timerval(38610), + 64, // # of pairs + 2, // # of bits per index + code_na003Times, + code_na003Codes +}; +const uint16_t code_na004Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, +}; +const uint8_t code_na004Codes[] = { + 0xA0, + 0x00, + 0x01, + 0x04, + 0x92, + 0x48, + 0x20, + 0x80, + 0x40, + 0x04, + 0x12, + 0x09, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_na004Code = { + freq_to_timerval(38610), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_na004Codes +}; +const uint16_t code_na005Times[] = { + 88, 90, + 88, 91, + 88, 181, + 88, 8976, + 177, 91, +}; +const uint8_t code_na005Codes[] = { + 0x10, + 0x92, + 0x49, + 0x46, + 0x33, + 0x09, + 0x24, + 0x94, + 0x60, +}; +const struct IrCode code_na005Code = { + freq_to_timerval(35714), + 24, // # of pairs + 3, // # of bits per index + code_na005Times, + code_na005Codes +}; +const uint16_t code_na006Times[] = { + 50, 62, + 50, 172, + 50, 4541, + 448, 466, + 450, 465, +}; +const uint8_t code_na006Codes[] = { + 0x64, + 0x90, + 0x00, + 0x04, + 0x90, + 0x00, + 0x00, + 0x80, + 0x00, + 0x04, + 0x12, + 0x49, + 0x2A, + 0x12, + 0x40, + 0x00, + 0x12, + 0x40, + 0x00, + 0x02, + 0x00, + 0x00, + 0x10, + 0x49, + 0x24, + 0x90, +}; +const struct IrCode code_na006Code = { + freq_to_timerval(38462), + 68, // # of pairs + 3, // # of bits per index + code_na006Times, + code_na006Codes +}; +const uint16_t code_na007Times[] = { + 49, 49, + 49, 50, + 49, 410, + 49, 510, + 49, 12107, +}; +const uint8_t code_na007Codes[] = { + 0x09, + 0x94, + 0x53, + 0x29, + 0x94, + 0xD9, + 0x85, + 0x32, + 0x8A, + 0x65, + 0x32, + 0x9B, + 0x20, +}; +const struct IrCode code_na007Code = { + freq_to_timerval(39216), + 34, // # of pairs + 3, // # of bits per index + code_na007Times, + code_na007Codes +}; +const uint16_t code_na008Times[] = { + 56, 58, + 56, 170, + 56, 4011, + 898, 450, + 900, 449, +}; +const uint8_t code_na008Codes[] = { + 0x64, + 0x00, + 0x49, + 0x00, + 0x92, + 0x00, + 0x20, + 0x82, + 0x01, + 0x04, + 0x10, + 0x48, + 0x2A, + 0x10, + 0x01, + 0x24, + 0x02, + 0x48, + 0x00, + 0x82, + 0x08, + 0x04, + 0x10, + 0x41, + 0x20, + 0x90, +}; +const struct IrCode code_na008Code = { + freq_to_timerval(38462), + 68, // # of pairs + 3, // # of bits per index + code_na008Times, + code_na008Codes +}; +const uint16_t code_na009Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, +}; +const uint8_t code_na009Codes[] = { + 0x84, + 0x90, + 0x00, + 0x20, + 0x80, + 0x08, + 0x00, + 0x00, + 0x09, + 0x24, + 0x92, + 0x40, + 0x0A, + 0xBA, + 0x40, +}; +const struct IrCode code_na009Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_na009Codes +}; +const uint16_t code_na010Times[] = { + 51, 55, + 51, 158, + 51, 2286, + 841, 419, +}; +const uint8_t code_na010Codes[] = { + 0xD4, + 0x00, + 0x15, + 0x10, + 0x25, + 0x00, + 0x05, + 0x44, + 0x09, + 0x40, + 0x01, + 0x51, + 0x01, +}; +const struct IrCode code_na010Code = { + freq_to_timerval(38462), + 52, // # of pairs + 2, // # of bits per index + code_na010Times, + code_na010Codes +}; +const uint16_t code_na011Times[] = { + 55, 55, + 55, 172, + 55, 4039, + 55, 9348, + 56, 0, + 884, 442, + 885, 225, +}; +const uint8_t code_na011Codes[] = { + 0xA0, + 0x00, + 0x41, + 0x04, + 0x92, + 0x08, + 0x24, + 0x90, + 0x40, + 0x00, + 0x02, + 0x09, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_na011Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na011Times, + code_na011Codes +}; +const uint16_t code_na012Times[] = { + 81, 87, + 81, 254, + 81, 3280, + 331, 336, + 331, 337, +}; +const uint8_t code_na012Codes[] = { + 0x64, + 0x12, + 0x08, + 0x24, + 0x00, + 0x08, + 0x20, + 0x10, + 0x09, + 0x2A, + 0x10, + 0x48, + 0x20, + 0x90, + 0x00, + 0x20, + 0x80, + 0x40, + 0x24, + 0x90, +}; +const struct IrCode code_na012Code = { + freq_to_timerval(38462), + 52, // # of pairs + 3, // # of bits per index + code_na012Times, + code_na012Codes +}; +const uint16_t code_na013Times[] = { + 53, 55, + 53, 167, + 53, 2304, + 53, 9369, + 893, 448, + 895, 447, +}; +const uint8_t code_na013Codes[] = { + 0x80, + 0x12, + 0x40, + 0x04, + 0x00, + 0x09, + 0x00, + 0x12, + 0x41, + 0x24, + 0x82, + 0x01, + 0x00, + 0x10, + 0x48, + 0x24, + 0xAA, + 0xE8, +}; +const struct IrCode code_na013Code = { + freq_to_timerval(38462), + 48, // # of pairs + 3, // # of bits per index + code_na013Times, + code_na013Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_na014Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_na014Codes[] = { + 0xA0, + 0x00, + 0x09, + 0x04, + 0x92, + 0x40, + 0x24, + 0x80, + 0x00, + 0x00, + 0x12, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_na014Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_na014Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_na015Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_na015Codes[] = { + 0xA0, + 0x80, + 0x01, + 0x04, + 0x12, + 0x48, + 0x24, + 0x00, + 0x00, + 0x00, + 0x92, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_na015Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_na015Codes +}; +const uint16_t code_na016Times[] = { + 28, 90, + 28, 211, + 28, 2507, +}; +const uint8_t code_na016Codes[] = { + 0x54, + 0x04, + 0x10, + 0x00, + 0x95, + 0x01, + 0x04, + 0x00, + 0x10, +}; +const struct IrCode code_na016Code = { + freq_to_timerval(34483), + 34, // # of pairs + 2, // # of bits per index + code_na016Times, + code_na016Codes +}; +const uint16_t code_na017Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, +}; +const uint8_t code_na017Codes[] = { + 0xA0, + 0x02, + 0x48, + 0x04, + 0x90, + 0x01, + 0x20, + 0x80, + 0x40, + 0x04, + 0x12, + 0x09, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na017Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na017Codes +}; +const uint16_t code_na018Times[] = { + 51, 55, + 51, 161, + 51, 2566, + 849, 429, + 849, 430, +}; +const uint8_t code_na018Codes[] = { + 0x60, + 0x82, + 0x08, + 0x24, + 0x10, + 0x41, + 0x00, + 0x12, + 0x40, + 0x04, + 0x80, + 0x09, + 0x2A, + 0x02, + 0x08, + 0x20, + 0x90, + 0x41, + 0x04, + 0x00, + 0x49, + 0x00, + 0x12, + 0x00, + 0x24, + 0xA8, + 0x08, + 0x20, + 0x82, + 0x41, + 0x04, + 0x10, + 0x01, + 0x24, + 0x00, + 0x48, + 0x00, + 0x92, + 0xA0, + 0x20, + 0x82, + 0x09, + 0x04, + 0x10, + 0x40, + 0x04, + 0x90, + 0x01, + 0x20, + 0x02, + 0x48, +}; +const struct IrCode code_na018Code = { + freq_to_timerval(38462), + 136, // # of pairs + 3, // # of bits per index + code_na018Times, + code_na018Codes +}; +const uint16_t code_na019Times[] = { + 40, 42, + 40, 124, + 40, 4601, + 325, 163, + 326, 163, +}; +const uint8_t code_na019Codes[] = { + 0x60, + 0x10, + 0x40, + 0x04, + 0x80, + 0x09, + 0x00, + 0x00, + 0x00, + 0x00, + 0x10, + 0x00, + 0x20, + 0x10, + 0x00, + 0x20, + 0x80, + 0x00, + 0x0A, + 0x00, + 0x41, + 0x00, + 0x12, + 0x00, + 0x24, + 0x00, + 0x00, + 0x00, + 0x00, + 0x40, + 0x00, + 0x80, + 0x40, + 0x00, + 0x82, + 0x00, + 0x00, + 0x00, +}; +const struct IrCode code_na019Code = { + freq_to_timerval(38462), + 100, // # of pairs + 3, // # of bits per index + code_na019Times, + code_na019Codes +}; +const uint16_t code_na020Times[] = { + 60, 55, + 60, 163, + 60, 4099, + 60, 9698, + 61, 0, + 898, 461, + 900, 230, +}; +const uint8_t code_na020Codes[] = { + 0xA0, + 0x10, + 0x00, + 0x04, + 0x82, + 0x49, + 0x20, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_na020Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na020Times, + code_na020Codes +}; +const uint16_t code_na021Times[] = { + 48, 52, + 48, 160, + 48, 400, + 48, 2335, + 799, 400, +}; +const uint8_t code_na021Codes[] = { + 0x80, + 0x10, + 0x40, + 0x08, + 0x82, + 0x08, + 0x01, + 0xC0, + 0x08, + 0x20, + 0x04, + 0x41, + 0x04, + 0x00, + 0x00, +}; +const struct IrCode code_na021Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na021Times, + code_na021Codes +}; +const uint16_t code_na022Times[] = { + 53, 60, + 53, 175, + 53, 4463, + 53, 9453, + 892, 450, + 895, 225, +}; +const uint8_t code_na022Codes[] = { + 0x80, + 0x02, + 0x40, + 0x00, + 0x02, + 0x40, + 0x00, + 0x00, + 0x01, + 0x24, + 0x92, + 0x48, + 0x0A, + 0xBA, + 0x00, +}; +const struct IrCode code_na022Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na022Times, + code_na022Codes +}; +const uint16_t code_na023Times[] = { + 48, 52, + 48, 409, + 48, 504, + 48, 10461, +}; +const uint8_t code_na023Codes[] = { + 0xA1, + 0x18, + 0x61, + 0xA1, + 0x18, + 0x7A, + 0x11, + 0x86, + 0x1A, + 0x11, + 0x86, +}; +const struct IrCode code_na023Code = { + freq_to_timerval(40000), + 44, // # of pairs + 2, // # of bits per index + code_na023Times, + code_na023Codes +}; +const uint16_t code_na024Times[] = { + 58, 60, + 58, 2569, + 118, 60, + 237, 60, + 238, 60, +}; +const uint8_t code_na024Codes[] = { + 0x69, + 0x24, + 0x10, + 0x40, + 0x03, + 0x12, + 0x48, + 0x20, + 0x80, + 0x00, +}; +const struct IrCode code_na024Code = { + freq_to_timerval(38462), + 26, // # of pairs + 3, // # of bits per index + code_na024Times, + code_na024Codes +}; +const uint16_t code_na025Times[] = { + 84, 90, + 84, 264, + 84, 3470, + 346, 350, + 347, 350, +}; +const uint8_t code_na025Codes[] = { + 0x64, + 0x92, + 0x49, + 0x00, + 0x00, + 0x00, + 0x00, + 0x02, + 0x49, + 0x2A, + 0x12, + 0x49, + 0x24, + 0x00, + 0x00, + 0x00, + 0x00, + 0x09, + 0x24, + 0x90, +}; +const struct IrCode code_na025Code = { + freq_to_timerval(38462), + 52, // # of pairs + 3, // # of bits per index + code_na025Times, + code_na025Codes +}; +const uint16_t code_na026Times[] = { + 49, 49, + 49, 50, + 49, 410, + 49, 510, + 49, 12582, +}; +const uint8_t code_na026Codes[] = { + 0x09, + 0x94, + 0x53, + 0x65, + 0x32, + 0x99, + 0x85, + 0x32, + 0x8A, + 0x6C, + 0xA6, + 0x53, + 0x20, +}; +const struct IrCode code_na026Code = { + freq_to_timerval(39216), + 34, // # of pairs + 3, // # of bits per index + code_na026Times, + code_na026Codes +}; + +/* Duplicate timing table, same as na001 ! + const uint16_t code_na027Times[] = { + 50, 100, + 50, 200, + 50, 800, + 400, 400, + }; + */ +const uint8_t code_na027Codes[] = { + 0xC5, + 0x41, + 0x11, + 0x10, + 0x14, + 0x44, + 0x6C, + 0x54, + 0x11, + 0x11, + 0x01, + 0x44, + 0x44, +}; +const struct IrCode code_na027Code = { + freq_to_timerval(57143), + 52, // # of pairs + 2, // # of bits per index + code_na001Times, + code_na027Codes +}; +const uint16_t code_na028Times[] = { + 118, 121, + 118, 271, + 118, 4750, + 258, 271, +}; +const uint8_t code_na028Codes[] = { + 0xC4, + 0x45, + 0x14, + 0x04, + 0x6C, + 0x44, + 0x51, + 0x40, + 0x44, +}; +const struct IrCode code_na028Code = { + freq_to_timerval(38610), + 36, // # of pairs + 2, // # of bits per index + code_na028Times, + code_na028Codes +}; +const uint16_t code_na029Times[] = { + 88, 90, + 88, 91, + 88, 181, + 177, 91, + 177, 8976, +}; +const uint8_t code_na029Codes[] = { + 0x0C, + 0x92, + 0x53, + 0x46, + 0x16, + 0x49, + 0x29, + 0xA2, + 0xC0, +}; +const struct IrCode code_na029Code = { + freq_to_timerval(35842), + 22, // # of pairs + 3, // # of bits per index + code_na029Times, + code_na029Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_na030Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_na030Codes[] = { + 0x80, + 0x00, + 0x41, + 0x04, + 0x12, + 0x08, + 0x20, + 0x00, + 0x00, + 0x04, + 0x92, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_na030Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_na030Codes +}; +const uint16_t code_na031Times[] = { + 88, 89, + 88, 90, + 88, 179, + 88, 8977, + 177, 90, +}; +const uint8_t code_na031Codes[] = { + 0x06, + 0x12, + 0x49, + 0x46, + 0x32, + 0x61, + 0x24, + 0x94, + 0x60, +}; +const struct IrCode code_na031Code = { + freq_to_timerval(35842), + 24, // # of pairs + 3, // # of bits per index + code_na031Times, + code_na031Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_na032Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_na032Codes[] = { + 0x80, + 0x00, + 0x41, + 0x04, + 0x12, + 0x08, + 0x20, + 0x80, + 0x00, + 0x04, + 0x12, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_na032Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_na032Codes +}; +const uint16_t code_na033Times[] = { + 40, 43, + 40, 122, + 40, 5297, + 334, 156, + 336, 155, +}; +const uint8_t code_na033Codes[] = { + 0x60, + 0x10, + 0x40, + 0x04, + 0x80, + 0x09, + 0x00, + 0x00, + 0x00, + 0x00, + 0x10, + 0x00, + 0x20, + 0x82, + 0x00, + 0x20, + 0x00, + 0x00, + 0x0A, + 0x00, + 0x41, + 0x00, + 0x12, + 0x00, + 0x24, + 0x00, + 0x00, + 0x00, + 0x00, + 0x40, + 0x00, + 0x82, + 0x08, + 0x00, + 0x80, + 0x00, + 0x00, + 0x00, +}; +const struct IrCode code_na033Code = { + freq_to_timerval(38462), + 100, // # of pairs + 3, // # of bits per index + code_na033Times, + code_na033Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_na034Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_na034Codes[] = { + 0xA0, + 0x00, + 0x41, + 0x04, + 0x92, + 0x08, + 0x24, + 0x92, + 0x48, + 0x00, + 0x00, + 0x01, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_na034Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_na034Codes +}; +const uint16_t code_na035Times[] = { + 96, 93, + 97, 93, + 97, 287, + 97, 3431, +}; +const uint8_t code_na035Codes[] = { + 0x16, + 0x66, + 0x5D, + 0x59, + 0x99, + 0x50, +}; +const struct IrCode code_na035Code = { + freq_to_timerval(41667), + 22, // # of pairs + 2, // # of bits per index + code_na035Times, + code_na035Codes +}; +const uint16_t code_na036Times[] = { + 82, 581, + 84, 250, + 84, 580, + 85, 0, +}; +const uint8_t code_na036Codes[] = { + 0x15, + 0x9A, + 0x9C, +}; +const struct IrCode code_na036Code = { + freq_to_timerval(37037), + 11, // # of pairs + 2, // # of bits per index + code_na036Times, + code_na036Codes +}; +const uint16_t code_na037Times[] = { + 39, 263, + 164, 163, + 514, 164, +}; +const uint8_t code_na037Codes[] = { + 0x80, + 0x45, + 0x00, +}; +const struct IrCode code_na037Code = { + freq_to_timerval(41667), + 11, // # of pairs + 2, // # of bits per index + code_na037Times, + code_na037Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na038Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na038Codes[] = { + 0xA4, + 0x10, + 0x40, + 0x00, + 0x82, + 0x09, + 0x20, + 0x80, + 0x40, + 0x04, + 0x12, + 0x09, + 0x2A, + 0x38, + 0x40, +}; +const struct IrCode code_na038Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na038Codes +}; +const uint16_t code_na039Times[] = { + 113, 101, + 688, 2707, +}; +const uint8_t code_na039Codes[] = { + 0x11, +}; +const struct IrCode code_na039Code = { + freq_to_timerval(40000), + 4, // # of pairs + 2, // # of bits per index + code_na039Times, + code_na039Codes +}; +const uint16_t code_na040Times[] = { + 113, 101, + 113, 201, + 113, 2707, +}; +const uint8_t code_na040Codes[] = { + 0x06, + 0x04, +}; +const struct IrCode code_na040Code = { + freq_to_timerval(40000), + 8, // # of pairs + 2, // # of bits per index + code_na040Times, + code_na040Codes +}; +const uint16_t code_na041Times[] = { + 58, 62, + 58, 2746, + 117, 62, + 242, 62, +}; +const uint8_t code_na041Codes[] = { + 0xE2, + 0x20, + 0x80, + 0x78, + 0x88, + 0x20, + 0x00, +}; +const struct IrCode code_na041Code = { + freq_to_timerval(76923), + 26, // # of pairs + 2, // # of bits per index + code_na041Times, + code_na041Codes +}; +const uint16_t code_na042Times[] = { + 54, 65, + 54, 170, + 54, 4099, + 54, 8668, + 899, 226, + 899, 421, +}; +const uint8_t code_na042Codes[] = { + 0xA4, + 0x80, + 0x00, + 0x20, + 0x82, + 0x49, + 0x00, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0x38, + 0x40, +}; +const struct IrCode code_na042Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na042Times, + code_na042Codes +}; +const uint16_t code_na043Times[] = { + 43, 120, + 43, 121, + 43, 3491, + 131, 45, +}; +const uint8_t code_na043Codes[] = { + 0x15, + 0x75, + 0x56, + 0x55, + 0x75, + 0x54, +}; +const struct IrCode code_na043Code = { + freq_to_timerval(40000), + 24, // # of pairs + 2, // # of bits per index + code_na043Times, + code_na043Codes +}; +const uint16_t code_na044Times[] = { + 51, 51, + 51, 160, + 51, 4096, + 51, 9513, + 431, 436, + 883, 219, +}; +const uint8_t code_na044Codes[] = { + 0x84, + 0x90, + 0x00, + 0x00, + 0x02, + 0x49, + 0x20, + 0x80, + 0x00, + 0x04, + 0x12, + 0x49, + 0x2A, + 0xBA, + 0x40, +}; +const struct IrCode code_na044Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na044Times, + code_na044Codes +}; +const uint16_t code_na045Times[] = { + 58, 53, + 58, 167, + 58, 4494, + 58, 9679, + 455, 449, + 456, 449, +}; +const uint8_t code_na045Codes[] = { + 0x80, + 0x90, + 0x00, + 0x00, + 0x90, + 0x00, + 0x04, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0x97, + 0x48, +}; +const struct IrCode code_na045Code = { + freq_to_timerval(38462), + 40, // # of pairs + 3, // # of bits per index + code_na045Times, + code_na045Codes +}; +const uint16_t code_na046Times[] = { + 51, 277, + 52, 53, + 52, 105, + 52, 277, + 52, 2527, + 52, 12809, + 103, 54, +}; +const uint8_t code_na046Codes[] = { + 0x0B, + 0x12, + 0x63, + 0x44, + 0x92, + 0x6B, + 0x44, + 0x92, + 0x50, +}; +const struct IrCode code_na046Code = { + freq_to_timerval(29412), + 23, // # of pairs + 3, // # of bits per index + code_na046Times, + code_na046Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na047Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na047Codes[] = { + 0xA0, + 0x00, + 0x40, + 0x04, + 0x92, + 0x09, + 0x24, + 0x92, + 0x09, + 0x20, + 0x00, + 0x40, + 0x0A, + 0x38, + 0x00, +}; +const struct IrCode code_na047Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na047Codes +}; + +/* Duplicate timing table, same as na044 ! + const uint16_t code_na048Times[] = { + 51, 51, + 51, 160, + 51, 4096, + 51, 9513, + 431, 436, + 883, 219, + }; + */ +const uint8_t code_na048Codes[] = { + 0x80, + 0x00, + 0x00, + 0x04, + 0x92, + 0x49, + 0x24, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_na048Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na044Times, + code_na048Codes +}; +const uint16_t code_na049Times[] = { + 274, 854, + 274, 1986, +}; +const uint8_t code_na049Codes[] = { + 0x14, + 0x11, + 0x40, +}; +const struct IrCode code_na049Code = { + freq_to_timerval(45455), + 11, // # of pairs + 2, // # of bits per index + code_na049Times, + code_na049Codes +}; +const uint16_t code_na050Times[] = { + 80, 88, + 80, 254, + 80, 3750, + 359, 331, +}; +const uint8_t code_na050Codes[] = { + 0xC0, + 0x00, + 0x01, + 0x55, + 0x55, + 0x52, + 0xC0, + 0x00, + 0x01, + 0x55, + 0x55, + 0x50, +}; +const struct IrCode code_na050Code = { + freq_to_timerval(55556), + 48, // # of pairs + 2, // # of bits per index + code_na050Times, + code_na050Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na051Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na051Codes[] = { + 0xA0, + 0x10, + 0x01, + 0x24, + 0x82, + 0x48, + 0x00, + 0x02, + 0x40, + 0x04, + 0x90, + 0x09, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na051Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na051Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na052Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na052Codes[] = { + 0xA4, + 0x90, + 0x48, + 0x00, + 0x02, + 0x01, + 0x20, + 0x80, + 0x40, + 0x04, + 0x12, + 0x09, + 0x2A, + 0x38, + 0x40, +}; +const struct IrCode code_na052Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na052Codes +}; +const uint16_t code_na053Times[] = { + 51, 232, + 51, 512, + 51, 792, + 51, 2883, +}; +const uint8_t code_na053Codes[] = { + 0x22, + 0x21, + 0x40, + 0x1C, + 0x88, + 0x85, + 0x00, + 0x40, +}; +const struct IrCode code_na053Code = { + freq_to_timerval(55556), + 30, // # of pairs + 2, // # of bits per index + code_na053Times, + code_na053Codes +}; + +/* Duplicate timing table, same as na053 ! + const uint16_t code_na054Times[] = { + 51, 232, + 51, 512, + 51, 792, + 51, 2883, + }; + */ +const uint8_t code_na054Codes[] = { + 0x22, + 0x20, + 0x15, + 0x72, + 0x22, + 0x01, + 0x54, +}; +const struct IrCode code_na054Code = { + freq_to_timerval(55556), + 28, // # of pairs + 2, // # of bits per index + code_na053Times, + code_na054Codes +}; +const uint16_t code_na055Times[] = { + 3, 10, + 3, 20, + 3, 30, + 3, 12778, +}; +const uint8_t code_na055Codes[] = { + 0x81, + 0x51, + 0x14, + 0xB8, + 0x15, + 0x11, + 0x44, +}; +const struct IrCode code_na055Code = { + 0, // Non-pulsed code + 27, // # of pairs + 2, // # of bits per index + code_na055Times, + code_na055Codes +}; +const uint16_t code_na056Times[] = { + 55, 193, + 57, 192, + 57, 384, + 58, 0, +}; +const uint8_t code_na056Codes[] = { + 0x2A, + 0x57, +}; +const struct IrCode code_na056Code = { + freq_to_timerval(37175), + 8, // # of pairs + 2, // # of bits per index + code_na056Times, + code_na056Codes +}; +const uint16_t code_na057Times[] = { + 45, 148, + 46, 148, + 46, 351, + 46, 2781, +}; +const uint8_t code_na057Codes[] = { + 0x2A, + 0x5D, + 0xA9, + 0x60, +}; +const struct IrCode code_na057Code = { + freq_to_timerval(40000), + 14, // # of pairs + 2, // # of bits per index + code_na057Times, + code_na057Codes +}; +const uint16_t code_na058Times[] = { + 22, 101, + 22, 219, + 23, 101, + 23, 219, + 31, 218, +}; +const uint8_t code_na058Codes[] = { + 0x8D, + 0xA4, + 0x08, + 0x04, + 0x04, + 0x92, + 0x4C, +}; +const struct IrCode code_na058Code = { + freq_to_timerval(33333), + 18, // # of pairs + 3, // # of bits per index + code_na058Times, + code_na058Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na059Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na059Codes[] = { + 0xA4, + 0x12, + 0x09, + 0x00, + 0x80, + 0x40, + 0x20, + 0x10, + 0x40, + 0x04, + 0x82, + 0x09, + 0x2A, + 0x38, + 0x40, +}; +const struct IrCode code_na059Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na059Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na060Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na060Codes[] = { + 0xA0, + 0x00, + 0x08, + 0x04, + 0x92, + 0x41, + 0x24, + 0x00, + 0x40, + 0x00, + 0x92, + 0x09, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na060Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na060Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na061Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na061Codes[] = { + 0xA0, + 0x00, + 0x08, + 0x24, + 0x92, + 0x41, + 0x04, + 0x82, + 0x00, + 0x00, + 0x10, + 0x49, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na061Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na061Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na062Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na062Codes[] = { + 0xA0, + 0x02, + 0x08, + 0x04, + 0x90, + 0x41, + 0x24, + 0x82, + 0x00, + 0x00, + 0x10, + 0x49, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na062Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na062Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na063Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na063Codes[] = { + 0xA4, + 0x92, + 0x49, + 0x20, + 0x00, + 0x00, + 0x04, + 0x92, + 0x48, + 0x00, + 0x00, + 0x01, + 0x2A, + 0x38, + 0x40, +}; +const struct IrCode code_na063Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na063Codes +}; + +/* Duplicate timing table, same as na001 ! + const uint16_t code_na064Times[] = { + 50, 100, + 50, 200, + 50, 800, + 400, 400, + }; + */ +const uint8_t code_na064Codes[] = { + 0xC0, + 0x01, + 0x51, + 0x55, + 0x54, + 0x04, + 0x2C, + 0x00, + 0x15, + 0x15, + 0x55, + 0x40, + 0x40, +}; +const struct IrCode code_na064Code = { + freq_to_timerval(57143), + 52, // # of pairs + 2, // # of bits per index + code_na001Times, + code_na064Codes +}; +const uint16_t code_na065Times[] = { + 48, 98, + 48, 197, + 98, 846, + 395, 392, + 1953, 392, +}; +const uint8_t code_na065Codes[] = { + 0x84, + 0x92, + 0x01, + 0x24, + 0x12, + 0x00, + 0x04, + 0x80, + 0x08, + 0x09, + 0x92, + 0x48, + 0x04, + 0x90, + 0x48, + 0x00, + 0x12, + 0x00, + 0x20, + 0x26, + 0x49, + 0x20, + 0x12, + 0x41, + 0x20, + 0x00, + 0x48, + 0x00, + 0x80, + 0x80, +}; +const struct IrCode code_na065Code = { + freq_to_timerval(59172), + 78, // # of pairs + 3, // # of bits per index + code_na065Times, + code_na065Codes +}; +const uint16_t code_na066Times[] = { + 38, 276, + 165, 154, + 415, 155, + 742, 154, +}; +const uint8_t code_na066Codes[] = { + 0xC0, + 0x45, + 0x02, + 0x01, + 0x14, + 0x08, + 0x04, + 0x50, + 0x00, +}; +const struct IrCode code_na066Code = { + freq_to_timerval(38462), + 33, // # of pairs + 2, // # of bits per index + code_na066Times, + code_na066Codes +}; + +/* Duplicate timing table, same as na044 ! + const uint16_t code_na067Times[] = { + 51, 51, + 51, 160, + 51, 4096, + 51, 9513, + 431, 436, + 883, 219, + }; + */ +const uint8_t code_na067Codes[] = { + 0x80, + 0x02, + 0x49, + 0x24, + 0x90, + 0x00, + 0x00, + 0x80, + 0x00, + 0x04, + 0x12, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_na067Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na044Times, + code_na067Codes +}; +const uint16_t code_na068Times[] = { + 43, 121, + 43, 9437, + 130, 45, + 131, 45, +}; +const uint8_t code_na068Codes[] = { + 0x8C, + 0x30, + 0x0D, + 0xCC, + 0x30, + 0x0C, +}; +const struct IrCode code_na068Code = { + freq_to_timerval(40000), + 24, // # of pairs + 2, // # of bits per index + code_na068Times, + code_na068Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na069Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na069Codes[] = { + 0xA0, + 0x00, + 0x00, + 0x04, + 0x92, + 0x49, + 0x24, + 0x82, + 0x00, + 0x00, + 0x10, + 0x49, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na069Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na069Codes +}; +const uint16_t code_na070Times[] = { + 27, 76, + 27, 182, + 27, 183, + 27, 3199, +}; +const uint8_t code_na070Codes[] = { + 0x40, + 0x02, + 0x08, + 0xA2, + 0xE0, + 0x00, + 0x82, + 0x28, + 0x40, +}; +const struct IrCode code_na070Code = { + freq_to_timerval(38462), + 33, // # of pairs + 2, // # of bits per index + code_na070Times, + code_na070Codes +}; +const uint16_t code_na071Times[] = { + 37, 181, + 37, 272, +}; +const uint8_t code_na071Codes[] = { + 0x11, + 0x40, +}; +const struct IrCode code_na071Code = { + freq_to_timerval(55556), + 8, // # of pairs + 2, // # of bits per index + code_na071Times, + code_na071Codes +}; + +/* Duplicate timing table, same as na042 ! + const uint16_t code_na072Times[] = { + 54, 65, + 54, 170, + 54, 4099, + 54, 8668, + 899, 226, + 899, 421, + }; + */ +const uint8_t code_na072Codes[] = { + 0xA0, + 0x90, + 0x00, + 0x00, + 0x90, + 0x00, + 0x00, + 0x10, + 0x40, + 0x04, + 0x82, + 0x09, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na072Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na042Times, + code_na072Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na073Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na073Codes[] = { + 0xA0, + 0x82, + 0x08, + 0x24, + 0x10, + 0x41, + 0x00, + 0x00, + 0x00, + 0x24, + 0x92, + 0x49, + 0x0A, + 0x38, + 0x00, +}; +const struct IrCode code_na073Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na073Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na074Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na074Codes[] = { + 0xA4, + 0x00, + 0x41, + 0x00, + 0x92, + 0x08, + 0x20, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0x38, + 0x40, +}; +const struct IrCode code_na074Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na074Codes +}; +const uint16_t code_na075Times[] = { + 51, 98, + 51, 194, + 102, 931, + 390, 390, + 390, 391, +}; +const uint8_t code_na075Codes[] = { + 0x60, + 0x00, + 0x01, + 0x04, + 0x10, + 0x49, + 0x24, + 0x82, + 0x08, + 0x2A, + 0x00, + 0x00, + 0x04, + 0x10, + 0x41, + 0x24, + 0x92, + 0x08, + 0x20, + 0xA0, +}; +const struct IrCode code_na075Code = { + freq_to_timerval(41667), + 52, // # of pairs + 3, // # of bits per index + code_na075Times, + code_na075Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na076Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na076Codes[] = { + 0xA0, + 0x92, + 0x09, + 0x04, + 0x00, + 0x40, + 0x20, + 0x10, + 0x40, + 0x04, + 0x82, + 0x09, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na076Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na076Codes +}; + +/* Duplicate timing table, same as na031 ! + const uint16_t code_na077Times[] = { + 88, 89, + 88, 90, + 88, 179, + 88, 8977, + 177, 90, + }; + */ +const uint8_t code_na077Codes[] = { + 0x10, + 0xA2, + 0x62, + 0x31, + 0x98, + 0x51, + 0x31, + 0x18, + 0x00, +}; +const struct IrCode code_na077Code = { + freq_to_timerval(35714), + 22, // # of pairs + 3, // # of bits per index + code_na031Times, + code_na077Codes +}; +const uint16_t code_na078Times[] = { + 40, 275, + 160, 154, + 480, 155, +}; +const uint8_t code_na078Codes[] = { + 0x80, + 0x45, + 0x04, + 0x01, + 0x14, + 0x10, + 0x04, + 0x50, + 0x40, +}; +const struct IrCode code_na078Code = { + freq_to_timerval(38462), + 34, // # of pairs + 2, // # of bits per index + code_na078Times, + code_na078Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na079Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na079Codes[] = { + 0xA0, + 0x82, + 0x08, + 0x24, + 0x10, + 0x41, + 0x04, + 0x90, + 0x08, + 0x20, + 0x02, + 0x41, + 0x0A, + 0x38, + 0x00, +}; +const struct IrCode code_na079Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na079Codes +}; + +/* Duplicate timing table, same as na055 ! + const uint16_t code_na080Times[] = { + 3, 10, + 3, 20, + 3, 30, + 3, 12778, + }; + */ +const uint8_t code_na080Codes[] = { + 0x81, + 0x50, + 0x40, + 0xB8, + 0x15, + 0x04, + 0x08, +}; +const struct IrCode code_na080Code = { + 0, // Non-pulsed code + 27, // # of pairs + 2, // # of bits per index + code_na055Times, + code_na080Codes +}; +const uint16_t code_na081Times[] = { + 48, 52, + 48, 409, + 48, 504, + 48, 9978, +}; +const uint8_t code_na081Codes[] = { + 0x18, + 0x46, + 0x18, + 0x68, + 0x47, + 0x18, + 0x46, + 0x18, + 0x68, + 0x44, +}; +const struct IrCode code_na081Code = { + freq_to_timerval(40000), + 40, // # of pairs + 2, // # of bits per index + code_na081Times, + code_na081Codes +}; +const uint16_t code_na082Times[] = { + 88, 89, + 88, 90, + 88, 179, + 88, 8888, + 177, 90, + 177, 179, +}; +const uint8_t code_na082Codes[] = { + 0x0A, + 0x12, + 0x49, + 0x2A, + 0xB2, + 0xA1, + 0x24, + 0x92, + 0xA8, +}; +const struct IrCode code_na082Code = { + freq_to_timerval(35714), + 24, // # of pairs + 3, // # of bits per index + code_na082Times, + code_na082Codes +}; + +/* Duplicate timing table, same as na031 ! + const uint16_t code_na083Times[] = { + 88, 89, + 88, 90, + 88, 179, + 88, 8977, + 177, 90, + }; + */ +const uint8_t code_na083Codes[] = { + 0x10, + 0x92, + 0x49, + 0x46, + 0x33, + 0x09, + 0x24, + 0x94, + 0x60, +}; +const struct IrCode code_na083Code = { + freq_to_timerval(35714), + 24, // # of pairs + 3, // # of bits per index + code_na031Times, + code_na083Codes +}; + +const uint16_t code_na084Times[] = { + 41, 43, + 41, 128, + 41, 7476, + 336, 171, + 338, 169, +}; +const uint8_t code_na084Codes[] = { + 0x60, + 0x80, + 0x00, + 0x00, + 0x00, + 0x08, + 0x00, + 0x00, + 0x40, + 0x20, + 0x00, + 0x00, + 0x04, + 0x12, + 0x48, + 0x04, + 0x12, + 0x08, + 0x2A, + 0x02, + 0x00, + 0x00, + 0x00, + 0x00, + 0x20, + 0x00, + 0x01, + 0x00, + 0x80, + 0x00, + 0x00, + 0x10, + 0x49, + 0x20, + 0x10, + 0x48, + 0x20, + 0x80, +}; +const struct IrCode code_na084Code = { + freq_to_timerval(37037), + 100, // # of pairs + 3, // # of bits per index + code_na084Times, + code_na084Codes +}; +const uint16_t code_na085Times[] = { + 55, 60, + 55, 165, + 55, 2284, + 445, 437, + 448, 436, +}; +const uint8_t code_na085Codes[] = { + 0x64, + 0x00, + 0x00, + 0x00, + 0x00, + 0x40, + 0x00, + 0x80, + 0xA1, + 0x00, + 0x00, + 0x00, + 0x00, + 0x10, + 0x00, + 0x20, + 0x10, +}; +const struct IrCode code_na085Code = { + freq_to_timerval(38462), + 44, // # of pairs + 3, // # of bits per index + code_na085Times, + code_na085Codes +}; +const uint16_t code_na086Times[] = { + 42, 46, + 42, 126, + 42, 6989, + 347, 176, + 347, 177, +}; +const uint8_t code_na086Codes[] = { + 0x60, + 0x82, + 0x08, + 0x20, + 0x82, + 0x41, + 0x04, + 0x92, + 0x00, + 0x20, + 0x80, + 0x40, + 0x00, + 0x90, + 0x40, + 0x04, + 0x00, + 0x41, + 0x2A, + 0x02, + 0x08, + 0x20, + 0x82, + 0x09, + 0x04, + 0x12, + 0x48, + 0x00, + 0x82, + 0x01, + 0x00, + 0x02, + 0x41, + 0x00, + 0x10, + 0x01, + 0x04, + 0x80, +}; +const struct IrCode code_na086Code = { + freq_to_timerval(37175), + 100, // # of pairs + 3, // # of bits per index + code_na086Times, + code_na086Codes +}; +const uint16_t code_na087Times[] = { + 56, 69, + 56, 174, + 56, 4165, + 56, 9585, + 880, 222, + 880, 435, +}; +const uint8_t code_na087Codes[] = { + 0xA0, + 0x02, + 0x40, + 0x04, + 0x90, + 0x09, + 0x20, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na087Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na087Times, + code_na087Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_na088Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_na088Codes[] = { + 0x80, + 0x00, + 0x40, + 0x04, + 0x12, + 0x08, + 0x04, + 0x92, + 0x40, + 0x00, + 0x00, + 0x09, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_na088Code = { + freq_to_timerval(38610), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_na088Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_na089Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_na089Codes[] = { + 0xA0, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x20, + 0x80, + 0x40, + 0x04, + 0x12, + 0x09, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_na089Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_na089Codes +}; +const uint16_t code_na090Times[] = { + 88, 90, + 88, 91, + 88, 181, + 88, 8976, + 177, 91, + 177, 181, +}; +const uint8_t code_na090Codes[] = { + 0x10, + 0xAB, + 0x11, + 0x8C, + 0xC2, + 0xAC, + 0x46, + 0x00, +}; +const struct IrCode code_na090Code = { + freq_to_timerval(35714), + 20, // # of pairs + 3, // # of bits per index + code_na090Times, + code_na090Codes +}; +const uint16_t code_na091Times[] = { + 48, 100, + 48, 200, + 48, 1050, + 400, 400, +}; +const uint8_t code_na091Codes[] = { + 0xD5, + 0x41, + 0x51, + 0x40, + 0x14, + 0x04, + 0x2D, + 0x54, + 0x15, + 0x14, + 0x01, + 0x40, + 0x41, +}; +const struct IrCode code_na091Code = { + freq_to_timerval(58824), + 52, // # of pairs + 2, // # of bits per index + code_na091Times, + code_na091Codes +}; +const uint16_t code_na092Times[] = { + 54, 56, + 54, 170, + 54, 4927, + 451, 447, +}; +const uint8_t code_na092Codes[] = { + 0xD1, + 0x00, + 0x11, + 0x00, + 0x04, + 0x00, + 0x11, + 0x55, + 0x6D, + 0x10, + 0x01, + 0x10, + 0x00, + 0x40, + 0x01, + 0x15, + 0x55, +}; +const struct IrCode code_na092Code = { + freq_to_timerval(38462), + 68, // # of pairs + 2, // # of bits per index + code_na092Times, + code_na092Codes +}; +const uint16_t code_na093Times[] = { + 55, 57, + 55, 167, + 55, 4400, + 895, 448, + 897, 447, +}; +const uint8_t code_na093Codes[] = { + 0x60, + 0x90, + 0x00, + 0x20, + 0x80, + 0x00, + 0x04, + 0x02, + 0x01, + 0x00, + 0x90, + 0x48, + 0x2A, + 0x02, + 0x40, + 0x00, + 0x82, + 0x00, + 0x00, + 0x10, + 0x08, + 0x04, + 0x02, + 0x41, + 0x20, + 0x80, +}; +const struct IrCode code_na093Code = { + freq_to_timerval(38462), + 68, // # of pairs + 3, // # of bits per index + code_na093Times, + code_na093Codes +}; + +/* Duplicate timing table, same as na005 ! + const uint16_t code_na094Times[] = { + 88, 90, + 88, 91, + 88, 181, + 88, 8976, + 177, 91, + }; + */ +const uint8_t code_na094Codes[] = { + 0x10, + 0x94, + 0x62, + 0x31, + 0x98, + 0x4A, + 0x31, + 0x18, + 0x00, +}; +const struct IrCode code_na094Code = { + freq_to_timerval(35714), + 22, // # of pairs + 3, // # of bits per index + code_na005Times, + code_na094Codes +}; +const uint16_t code_na095Times[] = { + 56, 58, + 56, 174, + 56, 4549, + 56, 9448, + 440, 446, +}; +const uint8_t code_na095Codes[] = { + 0x80, + 0x02, + 0x00, + 0x00, + 0x02, + 0x00, + 0x04, + 0x82, + 0x00, + 0x00, + 0x10, + 0x49, + 0x2A, + 0x17, + 0x08, +}; +const struct IrCode code_na095Code = { + freq_to_timerval(38462), + 40, // # of pairs + 3, // # of bits per index + code_na095Times, + code_na095Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_na096Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_na096Codes[] = { + 0x80, + 0x80, + 0x40, + 0x04, + 0x92, + 0x49, + 0x20, + 0x92, + 0x00, + 0x04, + 0x00, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_na096Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_na096Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_na097Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_na097Codes[] = { + 0x84, + 0x80, + 0x00, + 0x24, + 0x10, + 0x41, + 0x00, + 0x80, + 0x01, + 0x24, + 0x12, + 0x48, + 0x0A, + 0xBA, + 0x40, +}; +const struct IrCode code_na097Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_na097Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_na098Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_na098Codes[] = { + 0xA0, + 0x00, + 0x00, + 0x04, + 0x92, + 0x49, + 0x24, + 0x00, + 0x41, + 0x00, + 0x92, + 0x08, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_na098Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_na098Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_na099Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_na099Codes[] = { + 0x80, + 0x00, + 0x00, + 0x04, + 0x12, + 0x48, + 0x24, + 0x00, + 0x00, + 0x00, + 0x92, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_na099Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_na099Codes +}; +const uint16_t code_na100Times[] = { + 43, 171, + 45, 60, + 45, 170, + 54, 2301, +}; +const uint8_t code_na100Codes[] = { + 0x29, + 0x59, + 0x65, + 0x55, + 0xEA, + 0x56, + 0x59, + 0x55, + 0x70, +}; +const struct IrCode code_na100Code = { + freq_to_timerval(35842), + 34, // # of pairs + 2, // # of bits per index + code_na100Times, + code_na100Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_na101Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_na101Codes[] = { + 0xA0, + 0x00, + 0x09, + 0x04, + 0x92, + 0x40, + 0x20, + 0x00, + 0x00, + 0x04, + 0x92, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_na101Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_na101Codes +}; +const uint16_t code_na102Times[] = { + 86, 87, + 86, 258, + 86, 3338, + 346, 348, + 348, 347, +}; +const uint8_t code_na102Codes[] = { + 0x64, + 0x02, + 0x08, + 0x00, + 0x02, + 0x09, + 0x04, + 0x12, + 0x49, + 0x0A, + 0x10, + 0x08, + 0x20, + 0x00, + 0x08, + 0x24, + 0x10, + 0x49, + 0x24, + 0x10, +}; +const struct IrCode code_na102Code = { + freq_to_timerval(40000), + 52, // # of pairs + 3, // # of bits per index + code_na102Times, + code_na102Codes +}; + +/* Duplicate timing table, same as na045 ! + const uint16_t code_na103Times[] = { + 58, 53, + 58, 167, + 58, 4494, + 58, 9679, + 455, 449, + 456, 449, + }; + */ +const uint8_t code_na103Codes[] = { + 0x80, + 0x02, + 0x00, + 0x00, + 0x02, + 0x00, + 0x04, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0x97, + 0x48, +}; +const struct IrCode code_na103Code = { + freq_to_timerval(38462), + 40, // # of pairs + 3, // # of bits per index + code_na045Times, + code_na103Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na104Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na104Codes[] = { + 0xA4, + 0x00, + 0x49, + 0x00, + 0x92, + 0x00, + 0x20, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0x38, + 0x40, +}; +const struct IrCode code_na104Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na104Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na105Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na105Codes[] = { + 0xA4, + 0x80, + 0x00, + 0x20, + 0x12, + 0x49, + 0x04, + 0x92, + 0x49, + 0x20, + 0x00, + 0x00, + 0x0A, + 0x38, + 0x40, +}; +const struct IrCode code_na105Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na105Codes +}; + +/* Duplicate timing table, same as na044 ! + const uint16_t code_na106Times[] = { + 51, 51, + 51, 160, + 51, 4096, + 51, 9513, + 431, 436, + 883, 219, + }; + */ +const uint8_t code_na106Codes[] = { + 0x80, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x24, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_na106Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na044Times, + code_na106Codes +}; + +/* Duplicate timing table, same as na045 ! + const uint16_t code_na107Times[] = { + 58, 53, + 58, 167, + 58, 4494, + 58, 9679, + 455, 449, + 456, 449, + }; + */ +const uint8_t code_na107Codes[] = { + 0x80, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00, + 0x04, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0x97, + 0x48, +}; +const struct IrCode code_na107Code = { + freq_to_timerval(38462), + 40, // # of pairs + 3, // # of bits per index + code_na045Times, + code_na107Codes +}; + +/* Duplicate timing table, same as na045 ! + const uint16_t code_na108Times[] = { + 58, 53, + 58, 167, + 58, 4494, + 58, 9679, + 455, 449, + 456, 449, + }; + */ +const uint8_t code_na108Codes[] = { + 0x80, + 0x90, + 0x40, + 0x00, + 0x90, + 0x40, + 0x04, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0x97, + 0x48, +}; +const struct IrCode code_na108Code = { + freq_to_timerval(38462), + 40, // # of pairs + 3, // # of bits per index + code_na045Times, + code_na108Codes +}; +const uint16_t code_na109Times[] = { + 58, 61, + 58, 211, + 58, 9582, + 73, 4164, + 883, 211, + 1050, 494, +}; +const uint8_t code_na109Codes[] = { + 0xA0, + 0x00, + 0x08, + 0x24, + 0x92, + 0x41, + 0x00, + 0x82, + 0x00, + 0x04, + 0x10, + 0x49, + 0x2E, + 0x28, + 0x00, +}; +const struct IrCode code_na109Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na109Times, + code_na109Codes +}; + + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na110Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na110Codes[] = { + 0xA4, + 0x80, + 0x00, + 0x20, + 0x12, + 0x49, + 0x00, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0x38, + 0x40, +}; +const struct IrCode code_na110Code = { + freq_to_timerval(40161), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na110Codes +}; + +/* Duplicate timing table, same as na044 ! + const uint16_t code_na111Times[] = { + 51, 51, + 51, 160, + 51, 4096, + 51, 9513, + 431, 436, + 883, 219, + }; + */ +const uint8_t code_na111Codes[] = { + 0x84, + 0x92, + 0x49, + 0x20, + 0x00, + 0x00, + 0x04, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0xBA, + 0x40, +}; +const struct IrCode code_na111Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na044Times, + code_na111Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_na112Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_na112Codes[] = { + 0xA4, + 0x00, + 0x00, + 0x00, + 0x92, + 0x49, + 0x24, + 0x00, + 0x00, + 0x00, + 0x92, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_na112Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_na112Codes +}; +const uint16_t code_na113Times[] = { + 56, 54, + 56, 166, + 56, 3945, + 896, 442, + 896, 443, +}; +const uint8_t code_na113Codes[] = { + 0x60, + 0x00, + 0x00, + 0x20, + 0x02, + 0x09, + 0x04, + 0x02, + 0x01, + 0x00, + 0x90, + 0x48, + 0x2A, + 0x00, + 0x00, + 0x00, + 0x80, + 0x08, + 0x24, + 0x10, + 0x08, + 0x04, + 0x02, + 0x41, + 0x20, + 0x80, +}; +const struct IrCode code_na113Code = { + freq_to_timerval(40000), + 68, // # of pairs + 3, // # of bits per index + code_na113Times, + code_na113Codes +}; +const uint16_t code_na114Times[] = { + 44, 50, + 44, 147, + 44, 447, + 44, 2236, + 791, 398, + 793, 397, +}; +const uint8_t code_na114Codes[] = { + 0x84, + 0x10, + 0x40, + 0x08, + 0x82, + 0x08, + 0x01, + 0xD2, + 0x08, + 0x20, + 0x04, + 0x41, + 0x04, + 0x00, + 0x40, +}; +const struct IrCode code_na114Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na114Times, + code_na114Codes +}; + + +const uint16_t code_na115Times[] = { + 81, 86, + 81, 296, + 81, 3349, + 328, 331, + 329, 331, +}; +const uint8_t code_na115Codes[] = { + 0x60, + 0x82, + 0x00, + 0x20, + 0x80, + 0x41, + 0x04, + 0x90, + 0x41, + 0x2A, + 0x02, + 0x08, + 0x00, + 0x82, + 0x01, + 0x04, + 0x12, + 0x41, + 0x04, + 0x80, +}; +const struct IrCode code_na115Code = { + freq_to_timerval(40000), + 52, // # of pairs + 3, // # of bits per index + code_na115Times, + code_na115Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na116Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na116Codes[] = { + 0xA0, + 0x00, + 0x40, + 0x04, + 0x92, + 0x09, + 0x24, + 0x00, + 0x40, + 0x00, + 0x92, + 0x09, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na116Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na116Codes +}; +const uint16_t code_na117Times[] = { + 49, 54, + 49, 158, + 49, 420, + 49, 2446, + 819, 420, + 821, 419, +}; +const uint8_t code_na117Codes[] = { + 0x84, + 0x00, + 0x00, + 0x08, + 0x12, + 0x40, + 0x01, + 0xD2, + 0x00, + 0x00, + 0x04, + 0x09, + 0x20, + 0x00, + 0x40, +}; +const struct IrCode code_na117Code = { + freq_to_timerval(41667), + 38, // # of pairs + 3, // # of bits per index + code_na117Times, + code_na117Codes +}; + +/* Duplicate timing table, same as na044 ! + const uint16_t code_na118Times[] = { + 51, 51, + 51, 160, + 51, 4096, + 51, 9513, + 431, 436, + 883, 219, + }; + */ +const uint8_t code_na118Codes[] = { + 0x84, + 0x90, + 0x49, + 0x20, + 0x02, + 0x00, + 0x04, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0xBA, + 0x40, +}; +const struct IrCode code_na118Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na044Times, + code_na118Codes +}; +const uint16_t code_na119Times[] = { + 55, 63, + 55, 171, + 55, 4094, + 55, 9508, + 881, 219, + 881, 438, +}; +const uint8_t code_na119Codes[] = { + 0xA0, + 0x10, + 0x00, + 0x04, + 0x82, + 0x49, + 0x20, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na119Code = { + freq_to_timerval(55556), + 38, // # of pairs + 3, // # of bits per index + code_na119Times, + code_na119Codes +}; + + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na120Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na120Codes[] = { + 0xA0, + 0x12, + 0x00, + 0x04, + 0x80, + 0x49, + 0x24, + 0x92, + 0x40, + 0x00, + 0x00, + 0x09, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na120Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na120Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na121Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na121Codes[] = { + 0xA0, + 0x00, + 0x40, + 0x04, + 0x92, + 0x09, + 0x20, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na121Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na121Codes +}; +const uint16_t code_na122Times[] = { + 80, 95, + 80, 249, + 80, 3867, + 81, 0, + 329, 322, +}; +const uint8_t code_na122Codes[] = { + 0x80, + 0x00, + 0x00, + 0x00, + 0x12, + 0x49, + 0x24, + 0x90, + 0x0A, + 0x80, + 0x00, + 0x00, + 0x00, + 0x12, + 0x49, + 0x24, + 0x90, + 0x0B, +}; +const struct IrCode code_na122Code = { + freq_to_timerval(52632), + 48, // # of pairs + 3, // # of bits per index + code_na122Times, + code_na122Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na123Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na123Codes[] = { + 0xA0, + 0x02, + 0x48, + 0x04, + 0x90, + 0x01, + 0x20, + 0x12, + 0x40, + 0x04, + 0x80, + 0x09, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na123Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na123Codes +}; +const uint16_t code_na124Times[] = { + 54, 56, + 54, 151, + 54, 4092, + 54, 8677, + 900, 421, + 901, 226, +}; +const uint8_t code_na124Codes[] = { + 0x80, + 0x00, + 0x48, + 0x04, + 0x92, + 0x01, + 0x20, + 0x00, + 0x00, + 0x04, + 0x92, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_na124Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na124Times, + code_na124Codes +}; + +/* Duplicate timing table, same as na119 ! + const uint16_t code_na125Times[] = { + 55, 63, + 55, 171, + 55, 4094, + 55, 9508, + 881, 219, + 881, 438, + }; + */ +const uint8_t code_na125Codes[] = { + 0xA0, + 0x02, + 0x48, + 0x04, + 0x90, + 0x01, + 0x20, + 0x80, + 0x40, + 0x04, + 0x12, + 0x09, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na125Code = { + freq_to_timerval(55556), + 38, // # of pairs + 3, // # of bits per index + code_na119Times, + code_na125Codes +}; + + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na126Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na126Codes[] = { + 0xA4, + 0x10, + 0x00, + 0x20, + 0x82, + 0x49, + 0x00, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0x38, + 0x40, +}; +const struct IrCode code_na126Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na126Codes +}; +const uint16_t code_na127Times[] = { + 114, 100, + 115, 100, + 115, 200, + 115, 2706, +}; +const uint8_t code_na127Codes[] = { + 0x1B, + 0x59, +}; +const struct IrCode code_na127Code = { + freq_to_timerval(25641), + 8, // # of pairs + 2, // # of bits per index + code_na127Times, + code_na127Codes +}; + +/* Duplicate timing table, same as na102 ! + const uint16_t code_na128Times[] = { + 86, 87, + 86, 258, + 86, 3338, + 346, 348, + 348, 347, + }; + */ +const uint8_t code_na128Codes[] = { + 0x60, + 0x02, + 0x08, + 0x00, + 0x02, + 0x49, + 0x04, + 0x12, + 0x49, + 0x0A, + 0x00, + 0x08, + 0x20, + 0x00, + 0x09, + 0x24, + 0x10, + 0x49, + 0x24, + 0x00, +}; +const struct IrCode code_na128Code = { + freq_to_timerval(40000), + 52, // # of pairs + 3, // # of bits per index + code_na102Times, + code_na128Codes +}; + +/* Duplicate timing table, same as na017 ! + const uint16_t code_na129Times[] = { + 56, 57, + 56, 175, + 56, 4150, + 56, 9499, + 898, 227, + 898, 449, + }; + */ +const uint8_t code_na129Codes[] = { + 0xA4, + 0x92, + 0x49, + 0x20, + 0x00, + 0x00, + 0x00, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0x38, + 0x40, +}; +const struct IrCode code_na129Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na017Times, + code_na129Codes +}; +const uint16_t code_na130Times[] = { + 88, 90, + 88, 258, + 88, 2247, + 358, 349, + 358, 350, +}; +const uint8_t code_na130Codes[] = { + 0x64, + 0x00, + 0x08, + 0x24, + 0x82, + 0x09, + 0x24, + 0x10, + 0x01, + 0x0A, + 0x10, + 0x00, + 0x20, + 0x92, + 0x08, + 0x24, + 0x90, + 0x40, + 0x04, + 0x10, +}; +const struct IrCode code_na130Code = { + freq_to_timerval(37037), + 52, // # of pairs + 3, // # of bits per index + code_na130Times, + code_na130Codes +}; + +/* Duplicate timing table, same as na042 ! + const uint16_t code_na131Times[] = { + 54, 65, + 54, 170, + 54, 4099, + 54, 8668, + 899, 226, + 899, 421, + }; + */ +const uint8_t code_na131Codes[] = { + 0xA0, + 0x10, + 0x40, + 0x04, + 0x82, + 0x09, + 0x24, + 0x82, + 0x40, + 0x00, + 0x10, + 0x09, + 0x2A, + 0x38, + 0x00, +}; +const struct IrCode code_na131Code = { + freq_to_timerval(40000), + 38, // # of pairs + 3, // # of bits per index + code_na042Times, + code_na131Codes +}; +const uint16_t code_na132Times[] = { + 28, 106, + 28, 238, + 28, 370, + 28, 1173, +}; +const uint8_t code_na132Codes[] = { + 0x22, + 0x20, + 0x00, + 0x17, + 0x22, + 0x20, + 0x00, + 0x14, +}; +const struct IrCode code_na132Code = { + freq_to_timerval(83333), + 32, // # of pairs + 2, // # of bits per index + code_na132Times, + code_na132Codes +}; +const uint16_t code_na133Times[] = { + 13, 741, + 15, 489, + 15, 740, + 17, 4641, + 18, 0, +}; +const uint8_t code_na133Codes[] = { + 0x09, + 0x24, + 0x49, + 0x48, + 0xB4, + 0x92, + 0x44, + 0x94, + 0x8C, +}; +const struct IrCode code_na133Code = { + freq_to_timerval(41667), + 24, // # of pairs + 3, // # of bits per index + code_na133Times, + code_na133Codes +}; + +/* Duplicate timing table, same as na113 ! + const uint16_t code_na134Times[] = { + 56, 54, + 56, 166, + 56, 3945, + 896, 442, + 896, 443, + }; + */ +const uint8_t code_na134Codes[] = { + 0x60, + 0x90, + 0x00, + 0x24, + 0x10, + 0x00, + 0x04, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0x02, + 0x40, + 0x00, + 0x90, + 0x40, + 0x00, + 0x12, + 0x48, + 0x00, + 0x00, + 0x01, + 0x24, + 0x80, +}; +const struct IrCode code_na134Code = { + freq_to_timerval(40000), + 68, // # of pairs + 3, // # of bits per index + code_na113Times, + code_na134Codes +}; +const uint16_t code_na135Times[] = { + 53, 59, + 53, 171, + 53, 2301, + 892, 450, + 895, 448, +}; +const uint8_t code_na135Codes[] = { + 0x60, + 0x12, + 0x49, + 0x00, + 0x00, + 0x09, + 0x00, + 0x00, + 0x49, + 0x24, + 0x80, + 0x00, + 0x00, + 0x12, + 0x49, + 0x24, + 0xA8, + 0x01, + 0x24, + 0x90, + 0x00, + 0x00, + 0x90, + 0x00, + 0x04, + 0x92, + 0x48, + 0x00, + 0x00, + 0x01, + 0x24, + 0x92, + 0x48, +}; +const struct IrCode code_na135Code = { + freq_to_timerval(38462), + 88, // # of pairs + 3, // # of bits per index + code_na135Times, + code_na135Codes +}; +const uint16_t code_na136Times[] = { + 53, 59, + 53, 171, + 53, 2301, + 55, 0, + 892, 450, + 895, 448, +}; +const uint8_t code_na136Codes[] = { + 0x84, + 0x82, + 0x49, + 0x00, + 0x00, + 0x00, + 0x20, + 0x00, + 0x49, + 0x24, + 0x80, + 0x00, + 0x00, + 0x12, + 0x49, + 0x24, + 0xAA, + 0x48, + 0x24, + 0x90, + 0x00, + 0x00, + 0x02, + 0x00, + 0x04, + 0x92, + 0x48, + 0x00, + 0x00, + 0x01, + 0x24, + 0x92, + 0x4B, +}; +const struct IrCode code_na136Code = { + freq_to_timerval(38610), + 88, // # of pairs + 3, // # of bits per index + code_na136Times, + code_na136Codes +}; + + + + +const uint16_t code_eu000Times[] = { + 43, 47, + 43, 91, + 43, 8324, + 88, 47, + 133, 133, + 264, 90, + 264, 91, +}; +const uint8_t code_eu000Codes[] = { + 0xA4, + 0x08, + 0x00, + 0x00, + 0x00, + 0x00, + 0x64, + 0x2C, + 0x40, + 0x80, + 0x00, + 0x00, + 0x00, + 0x06, + 0x41, +}; +const struct IrCode code_eu000Code = { + freq_to_timerval(35714), + 40, // # of pairs + 3, // # of bits per index + code_eu000Times, + code_eu000Codes +}; +const uint16_t code_eu001Times[] = { + 47, 265, + 51, 54, + 51, 108, + 51, 263, + 51, 2053, + 51, 11647, + 100, 109, +}; +const uint8_t code_eu001Codes[] = { + 0x04, + 0x92, + 0x49, + 0x26, + 0x35, + 0x89, + 0x24, + 0x9A, + 0xD6, + 0x24, + 0x92, + 0x48, +}; +const struct IrCode code_eu001Code = { + freq_to_timerval(30303), + 31, // # of pairs + 3, // # of bits per index + code_eu001Times, + code_eu001Codes +}; +const uint16_t code_eu002Times[] = { + 43, 206, + 46, 204, + 46, 456, + 46, 3488, +}; +const uint8_t code_eu002Codes[] = { + 0x1A, + 0x56, + 0xA6, + 0xD6, + 0x95, + 0xA9, + 0x90, +}; +const struct IrCode code_eu002Code = { + freq_to_timerval(33333), + 26, // # of pairs + 2, // # of bits per index + code_eu002Times, + code_eu002Codes +}; + +/* Duplicate timing table, same as na000 ! + const uint16_t code_eu003Times[] = { + 58, 60, + 58, 2687, + 118, 60, + 237, 60, + 238, 60, + }; + */ +/* +const uint8_t code_eu003Codes[] = { + 0x68, + 0x20, + 0x80, + 0x40, + 0x03, + 0x10, + 0x41, + 0x00, + 0x80, + 0x00, + }; + const struct IrCode code_eu003Code = { + freq_to_timerval(38462), + 26, // # of pairs + 3, // # of bits per index + code_na000Times, + code_eu003Codes + };// Duplicate IR Code - same as na000 + */ + +const uint16_t code_eu004Times[] = { + 44, 45, + 44, 131, + 44, 7462, + 346, 176, + 346, 178, +}; +const uint8_t code_eu004Codes[] = { + 0x60, + 0x80, + 0x00, + 0x00, + 0x00, + 0x08, + 0x00, + 0x00, + 0x00, + 0x20, + 0x00, + 0x00, + 0x04, + 0x12, + 0x48, + 0x04, + 0x12, + 0x48, + 0x2A, + 0x02, + 0x00, + 0x00, + 0x00, + 0x00, + 0x20, + 0x00, + 0x00, + 0x00, + 0x80, + 0x00, + 0x00, + 0x10, + 0x49, + 0x20, + 0x10, + 0x49, + 0x20, + 0x80, +}; +const struct IrCode code_eu004Code = { + freq_to_timerval(37037), + 100, // # of pairs + 3, // # of bits per index + code_eu004Times, + code_eu004Codes +};// Duplicate IR Code? Similar to NA002 + +const uint16_t code_eu005Times[] = { + 24, 190, + 25, 80, + 25, 190, + 25, 4199, + 25, 4799, +}; +const uint8_t code_eu005Codes[] = { + 0x04, + 0x92, + 0x52, + 0x28, + 0x92, + 0x8C, + 0x44, + 0x92, + 0x89, + 0x45, + 0x24, + 0x53, + 0x44, + 0x92, + 0x52, + 0x28, + 0x92, + 0x8C, + 0x44, + 0x92, + 0x89, + 0x45, + 0x24, + 0x51, +}; +const struct IrCode code_eu005Code = { + freq_to_timerval(38610), + 64, // # of pairs + 3, // # of bits per index + code_eu005Times, + code_eu005Codes +}; +// This is actually power TOGGLE for Samsung TVs. Therefore followed later by new eu141, discrete OFF +const uint16_t code_eu006Times[] = { + 53, 63, + 53, 172, + 53, 4472, + 54, 0, + 455, 468, +}; +const uint8_t code_eu006Codes[] = { + 0x84, + 0x90, + 0x00, + 0x04, + 0x90, + 0x00, + 0x00, + 0x80, + 0x00, + 0x04, + 0x12, + 0x49, + 0x2A, + 0x12, + 0x40, + 0x00, + 0x12, + 0x40, + 0x00, + 0x02, + 0x00, + 0x00, + 0x10, + 0x49, + 0x24, + 0xB0, +}; +const struct IrCode code_eu006Code = { + freq_to_timerval(38462), + 68, // # of pairs + 3, // # of bits per index + code_eu006Times, + code_eu006Codes +}; +const uint16_t code_eu007Times[] = { + 50, 54, + 50, 159, + 50, 2307, + 838, 422, +}; +const uint8_t code_eu007Codes[] = { + 0xD4, + 0x00, + 0x15, + 0x10, + 0x25, + 0x00, + 0x05, + 0x44, + 0x09, + 0x40, + 0x01, + 0x51, + 0x01, +}; +const struct IrCode code_eu007Code = { + freq_to_timerval(38462), + 52, // # of pairs + 2, // # of bits per index + code_eu007Times, + code_eu007Codes +};// Duplicate IR Code? - Similar to NA010 + + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu008Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu008Codes[] = { + 0xA0, + 0x00, + 0x41, + 0x04, + 0x92, + 0x08, + 0x24, + 0x90, + 0x40, + 0x00, + 0x02, + 0x09, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu008Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu008Codes +}; + + +/* Duplicate timing table, same as na005 ! + const uint16_t code_eu009Times[] = { + 88, 90, + 88, 91, + 88, 181, + 88, 8976, + 177, 91, + }; + */ +/* +const uint8_t code_eu009Codes[] = { + 0x10, + 0x92, + 0x49, + 0x46, + 0x33, + 0x09, + 0x24, + 0x94, + 0x60, + }; + const struct IrCode code_eu009Code = { + freq_to_timerval(35714), + 24, // # of pairs + 3, // # of bits per index + code_na005Times, + code_eu009Codes + };// Duplicate IR Code - same as na005 + */ + + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu010Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +/* +const uint8_t code_eu010Codes[] = { + 0xA0, + 0x00, + 0x01, + 0x04, + 0x92, + 0x48, + 0x20, + 0x80, + 0x40, + 0x04, + 0x12, + 0x09, + 0x2B, + 0x3D, + 0x00, + }; + const struct IrCode code_eu010Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu010Codes + };// Duplicate IR Code - same as NA004 + */ + +/* Duplicate timing table, same as na009 ! + const uint16_t code_eu011Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_eu011Codes[] = { + 0x84, + 0x00, + 0x48, + 0x04, + 0x02, + 0x01, + 0x04, + 0x80, + 0x09, + 0x00, + 0x12, + 0x40, + 0x2A, + 0xBA, + 0x40, +}; +const struct IrCode code_eu011Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_eu011Codes +}; +const uint16_t code_eu012Times[] = { + 46, 206, + 46, 459, + 46, 3447, +}; +const uint8_t code_eu012Codes[] = { + 0x05, + 0x01, + 0x51, + 0x81, + 0x40, + 0x54, + 0x40, +}; +const struct IrCode code_eu012Code = { + freq_to_timerval(33445), + 26, // # of pairs + 2, // # of bits per index + code_eu012Times, + code_eu012Codes +}; +const uint16_t code_eu013Times[] = { + 53, 59, + 53, 171, + 53, 2302, + 895, 449, +}; +const uint8_t code_eu013Codes[] = { + 0xD4, + 0x55, + 0x00, + 0x00, + 0x40, + 0x15, + 0x54, + 0x00, + 0x01, + 0x55, + 0x56, + 0xD4, + 0x55, + 0x00, + 0x00, + 0x40, + 0x15, + 0x54, + 0x00, + 0x01, + 0x55, + 0x55, +}; +const struct IrCode code_eu013Code = { + freq_to_timerval(38462), + 88, // # of pairs + 2, // # of bits per index + code_eu013Times, + code_eu013Codes +}; + +/* Duplicate timing table, same as na021 ! + const uint16_t code_eu014Times[] = { + 48, 52, + 48, 160, + 48, 400, + 48, 2335, + 799, 400, + }; + */ +/* +const uint8_t code_eu014Codes[] = { + 0x80, + 0x10, + 0x40, + 0x08, + 0x82, + 0x08, + 0x01, + 0xC0, + 0x08, + 0x20, + 0x04, + 0x41, + 0x04, + 0x00, + 0x00, + }; + const struct IrCode code_eu014Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na021Times, + code_eu014Codes + };// Duplicate IR Code - same as NA021 + */ + +const uint16_t code_eu015Times[] = { + 53, 54, + 53, 156, + 53, 2542, + 851, 425, + 853, 424, +}; +const uint8_t code_eu015Codes[] = { + 0x60, + 0x82, + 0x08, + 0x24, + 0x10, + 0x41, + 0x00, + 0x12, + 0x40, + 0x04, + 0x80, + 0x09, + 0x2A, + 0x02, + 0x08, + 0x20, + 0x90, + 0x41, + 0x04, + 0x00, + 0x49, + 0x00, + 0x12, + 0x00, + 0x24, + 0xA8, + 0x08, + 0x20, + 0x82, + 0x41, + 0x04, + 0x10, + 0x01, + 0x24, + 0x00, + 0x48, + 0x00, + 0x92, + 0xA0, + 0x20, + 0x82, + 0x09, + 0x04, + 0x10, + 0x40, + 0x04, + 0x90, + 0x01, + 0x20, + 0x02, + 0x48, +}; +const struct IrCode code_eu015Code = { + freq_to_timerval(38462), + 136, // # of pairs + 3, // # of bits per index + code_eu015Times, + code_eu015Codes +};// Duplicate IR Code? - Similar to NA018 + +const uint16_t code_eu016Times[] = { + 28, 92, + 28, 213, + 28, 214, + 28, 2771, +}; +const uint8_t code_eu016Codes[] = { + 0x68, + 0x08, + 0x20, + 0x00, + 0xEA, + 0x02, + 0x08, + 0x00, + 0x10, +}; +const struct IrCode code_eu016Code = { + freq_to_timerval(33333), + 34, // # of pairs + 2, // # of bits per index + code_eu016Times, + code_eu016Codes +}; +const uint16_t code_eu017Times[] = { + 15, 844, + 16, 557, + 16, 844, + 16, 5224, +}; +const uint8_t code_eu017Codes[] = { + 0x1A, + 0x9A, + 0x9B, + 0x9A, + 0x9A, + 0x99, +}; +const struct IrCode code_eu017Code = { + freq_to_timerval(33333), + 24, // # of pairs + 2, // # of bits per index + code_eu017Times, + code_eu017Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu018Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu018Codes[] = { + 0xA0, + 0x02, + 0x48, + 0x04, + 0x90, + 0x01, + 0x20, + 0x12, + 0x40, + 0x04, + 0x80, + 0x09, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu018Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu018Codes +}; +const uint16_t code_eu019Times[] = { + 50, 54, + 50, 158, + 50, 418, + 50, 2443, + 843, 418, +}; +const uint8_t code_eu019Codes[] = { + 0x80, + 0x80, + 0x00, + 0x08, + 0x12, + 0x40, + 0x01, + 0xC0, + 0x40, + 0x00, + 0x04, + 0x09, + 0x20, + 0x00, + 0x00, +}; +const struct IrCode code_eu019Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_eu019Times, + code_eu019Codes +}; +const uint16_t code_eu020Times[] = { + 48, 301, + 48, 651, + 48, 1001, + 48, 3001, +}; +const uint8_t code_eu020Codes[] = { + 0x22, + 0x20, + 0x00, + 0x01, + 0xC8, + 0x88, + 0x00, + 0x00, + 0x40, +}; +const struct IrCode code_eu020Code = { + freq_to_timerval(35714), + 34, // # of pairs + 2, // # of bits per index + code_eu020Times, + code_eu020Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_eu021Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_eu021Codes[] = { + 0x84, + 0x80, + 0x00, + 0x20, + 0x82, + 0x49, + 0x00, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0xBA, + 0x40, +}; +const struct IrCode code_eu021Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_eu021Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu022Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu022Codes[] = { + 0xA4, + 0x80, + 0x41, + 0x00, + 0x12, + 0x08, + 0x24, + 0x90, + 0x40, + 0x00, + 0x02, + 0x09, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu022Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu022Codes +}; + +/* Duplicate timing table, same as na022 ! + const uint16_t code_eu023Times[] = { + 53, 60, + 53, 175, + 53, 4463, + 53, 9453, + 892, 450, + 895, 225, + }; + */ +/* +const uint8_t code_eu023Codes[] = { + 0x80, + 0x02, + 0x40, + 0x00, + 0x02, + 0x40, + 0x00, + 0x00, + 0x01, + 0x24, + 0x92, + 0x48, + 0x0A, + 0xBA, + 0x00, + }; + const struct IrCode code_eu023Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na022Times, + code_eu023Codes + };// Duplicate IR Code - Same as NA022 + */ + + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu024Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu024Codes[] = { + 0xA0, + 0x02, + 0x48, + 0x04, + 0x90, + 0x01, + 0x20, + 0x00, + 0x40, + 0x04, + 0x92, + 0x09, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu024Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu024Codes +}; +const uint16_t code_eu025Times[] = { + 49, 52, + 49, 102, + 49, 250, + 49, 252, + 49, 2377, + 49, 12009, + 100, 52, + 100, 102, +}; +const uint8_t code_eu025Codes[] = { + 0x47, + 0x00, + 0x23, + 0x3C, + 0x01, + 0x59, + 0xE0, + 0x04, +}; +const struct IrCode code_eu025Code = { + freq_to_timerval(31250), + 21, // # of pairs + 3, // # of bits per index + code_eu025Times, + code_eu025Codes +}; +const uint16_t code_eu026Times[] = { + 14, 491, + 14, 743, + 14, 4926, +}; +const uint8_t code_eu026Codes[] = { + 0x55, + 0x40, + 0x42, + 0x55, + 0x40, + 0x41, +}; +const struct IrCode code_eu026Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu026Times, + code_eu026Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu027Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu027Codes[] = { + 0xA0, + 0x82, + 0x08, + 0x24, + 0x10, + 0x41, + 0x04, + 0x10, + 0x01, + 0x20, + 0x82, + 0x48, + 0x0B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu027Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu027Codes +}; +const uint16_t code_eu028Times[] = { + 47, 267, + 50, 55, + 50, 110, + 50, 265, + 50, 2055, + 50, 12117, + 100, 57, +}; +const uint8_t code_eu028Codes[] = { + 0x04, + 0x92, + 0x49, + 0x26, + 0x34, + 0x72, + 0x24, + 0x9A, + 0xD1, + 0xC8, + 0x92, + 0x48, +}; +const struct IrCode code_eu028Code = { + freq_to_timerval(30303), + 31, // # of pairs + 3, // # of bits per index + code_eu028Times, + code_eu028Codes +}; +const uint16_t code_eu029Times[] = { + 50, 50, + 50, 99, + 50, 251, + 50, 252, + 50, 1445, + 50, 11014, + 102, 49, + 102, 98, +}; +const uint8_t code_eu029Codes[] = { + 0x47, + 0x00, + 0x00, + 0x00, + 0x00, + 0x04, + 0x64, + 0x62, + 0x00, + 0xE0, + 0x00, + 0x2B, + 0x23, + 0x10, + 0x07, + 0x00, + 0x00, + 0x80, +}; +const struct IrCode code_eu029Code = { + freq_to_timerval(34483), + 46, // # of pairs + 3, // # of bits per index + code_eu029Times, + code_eu029Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu030Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu030Codes[] = { + 0xA0, + 0x10, + 0x00, + 0x04, + 0x82, + 0x49, + 0x20, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu030Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu030Codes +};// Duplicate IR Code? - Smilar to NA020 + +const uint16_t code_eu031Times[] = { + 53, 53, + 53, 160, + 53, 1697, + 838, 422, +}; +const uint8_t code_eu031Codes[] = { + 0xD5, + 0x50, + 0x15, + 0x11, + 0x65, + 0x54, + 0x05, + 0x44, + 0x59, + 0x55, + 0x01, + 0x51, + 0x15, +}; +const struct IrCode code_eu031Code = { + freq_to_timerval(38462), + 52, // # of pairs + 2, // # of bits per index + code_eu031Times, + code_eu031Codes +}; +const uint16_t code_eu032Times[] = { + 49, 205, + 49, 206, + 49, 456, + 49, 3690, +}; +const uint8_t code_eu032Codes[] = { + 0x1A, + 0x56, + 0xA5, + 0xD6, + 0x95, + 0xA9, + 0x40, +}; +const struct IrCode code_eu032Code = { + freq_to_timerval(33333), + 26, // # of pairs + 2, // # of bits per index + code_eu032Times, + code_eu032Codes +}; +const uint16_t code_eu033Times[] = { + 48, 150, + 50, 149, + 50, 347, + 50, 2936, +}; +const uint8_t code_eu033Codes[] = { + 0x2A, + 0x5D, + 0xA9, + 0x60, +}; +const struct IrCode code_eu033Code = { + freq_to_timerval(38462), + 14, // # of pairs + 2, // # of bits per index + code_eu033Times, + code_eu033Codes +}; + + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu034Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu034Codes[] = { + 0xA0, + 0x02, + 0x40, + 0x04, + 0x90, + 0x09, + 0x20, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu034Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu034Codes +}; + +/* Duplicate timing table, same as na005 ! + const uint16_t code_eu035Times[] = { + 88, 90, + 88, 91, + 88, 181, + 88, 8976, + 177, 91, + }; + */ +/* +const uint8_t code_eu035Codes[] = { + 0x10, + 0x92, + 0x49, + 0x46, + 0x33, + 0x09, + 0x24, + 0x94, + 0x60, + }; + const struct IrCode code_eu035Code = { + freq_to_timerval(35714), + 24, // # of pairs + 3, // # of bits per index + code_na005Times, + code_eu035Codes + };// Duplicate IR Code - same as eu009! + */ + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu036Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu036Codes[] = { + 0xA4, + 0x00, + 0x49, + 0x00, + 0x92, + 0x00, + 0x20, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu036Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu036Codes +}; +const uint16_t code_eu037Times[] = { + 14, 491, + 14, 743, + 14, 5178, +}; +const uint8_t code_eu037Codes[] = { + 0x45, + 0x50, + 0x02, + 0x45, + 0x50, + 0x01, +}; +const struct IrCode code_eu037Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu037Times, + code_eu037Codes +}; +const uint16_t code_eu038Times[] = { + 3, 1002, + 3, 1495, + 3, 3059, +}; +const uint8_t code_eu038Codes[] = { + 0x05, + 0x60, + 0x54, +}; +const struct IrCode code_eu038Code = { + 0, // Non-pulsed code + 11, // # of pairs + 2, // # of bits per index + code_eu038Times, + code_eu038Codes +}; +const uint16_t code_eu039Times[] = { + 13, 445, + 13, 674, + 13, 675, + 13, 4583, +}; +const uint8_t code_eu039Codes[] = { + 0x6A, + 0x82, + 0x83, + 0xAA, + 0x82, + 0x81, +}; +const struct IrCode code_eu039Code = { + freq_to_timerval(40161), + 24, // # of pairs + 2, // # of bits per index + code_eu039Times, + code_eu039Codes +}; +const uint16_t code_eu040Times[] = { + 85, 89, + 85, 264, + 85, 3402, + 347, 350, + 348, 350, +}; +const uint8_t code_eu040Codes[] = { + 0x60, + 0x90, + 0x40, + 0x20, + 0x80, + 0x40, + 0x20, + 0x90, + 0x41, + 0x2A, + 0x02, + 0x41, + 0x00, + 0x82, + 0x01, + 0x00, + 0x82, + 0x41, + 0x04, + 0x80, +}; +const struct IrCode code_eu040Code = { + freq_to_timerval(35714), + 52, // # of pairs + 3, // # of bits per index + code_eu040Times, + code_eu040Codes +}; +const uint16_t code_eu041Times[] = { + 46, 300, + 49, 298, + 49, 648, + 49, 997, + 49, 3056, +}; +const uint8_t code_eu041Codes[] = { + 0x0C, + 0xB2, + 0xCA, + 0x49, + 0x13, + 0x0B, + 0x2C, + 0xB2, + 0x92, + 0x44, + 0xB0, +}; +const struct IrCode code_eu041Code = { + freq_to_timerval(33333), + 28, // # of pairs + 3, // # of bits per index + code_eu041Times, + code_eu041Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_eu042Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_eu042Codes[] = { + 0x80, + 0x00, + 0x00, + 0x24, + 0x92, + 0x09, + 0x00, + 0x82, + 0x00, + 0x04, + 0x10, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_eu042Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_eu042Codes +}; +const uint16_t code_eu043Times[] = { + 1037, 4216, + 1040, 0, +}; +const uint8_t code_eu043Codes[] = { + 0x10, +}; +const struct IrCode code_eu043Code = { + freq_to_timerval(41667), + 2, // # of pairs + 2, // # of bits per index + code_eu043Times, + code_eu043Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu044Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu044Codes[] = { + 0xA0, + 0x02, + 0x01, + 0x04, + 0x90, + 0x48, + 0x20, + 0x00, + 0x00, + 0x04, + 0x92, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu044Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu044Codes +}; +const uint16_t code_eu045Times[] = { + 152, 471, + 154, 156, + 154, 469, + 154, 2947, +}; +const uint8_t code_eu045Codes[] = { + 0x16, + 0xE5, + 0x90, +}; +const struct IrCode code_eu045Code = { + freq_to_timerval(41667), + 10, // # of pairs + 2, // # of bits per index + code_eu045Times, + code_eu045Codes +}; +const uint16_t code_eu046Times[] = { + 15, 493, + 16, 493, + 16, 698, + 16, 1414, +}; +const uint8_t code_eu046Codes[] = { + 0x16, + 0xAB, + 0x56, + 0xA9, +}; +const struct IrCode code_eu046Code = { + freq_to_timerval(34602), + 16, // # of pairs + 2, // # of bits per index + code_eu046Times, + code_eu046Codes +}; +const uint16_t code_eu047Times[] = { + 3, 496, + 3, 745, + 3, 1488, +}; +const uint8_t code_eu047Codes[] = { + 0x41, + 0x24, + 0x12, + 0x41, + 0x00, +}; +const struct IrCode code_eu047Code = { + 0, // Non-pulsed code + 17, // # of pairs + 2, // # of bits per index + code_eu047Times, + code_eu047Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_eu048Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_eu048Codes[] = { + 0x80, + 0x00, + 0x00, + 0x24, + 0x82, + 0x49, + 0x04, + 0x80, + 0x40, + 0x00, + 0x12, + 0x09, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_eu048Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_eu048Codes +}; +const uint16_t code_eu049Times[] = { + 55, 55, + 55, 167, + 55, 4577, + 55, 9506, + 448, 445, + 450, 444, +}; +const uint8_t code_eu049Codes[] = { + 0x80, + 0x92, + 0x00, + 0x00, + 0x92, + 0x00, + 0x00, + 0x10, + 0x40, + 0x04, + 0x82, + 0x09, + 0x2A, + 0x97, + 0x48, +}; +const struct IrCode code_eu049Code = { + freq_to_timerval(38462), + 40, // # of pairs + 3, // # of bits per index + code_eu049Times, + code_eu049Codes +}; +const uint16_t code_eu050Times[] = { + 91, 88, + 91, 267, + 91, 3621, + 361, 358, + 361, 359, +}; +const uint8_t code_eu050Codes[] = { + 0x60, + 0x00, + 0x00, + 0x00, + 0x12, + 0x49, + 0x24, + 0x92, + 0x42, + 0x80, + 0x00, + 0x00, + 0x00, + 0x12, + 0x49, + 0x24, + 0x92, + 0x40, +}; +const struct IrCode code_eu050Code = { + freq_to_timerval(33333), + 48, // # of pairs + 3, // # of bits per index + code_eu050Times, + code_eu050Codes +}; +const uint16_t code_eu051Times[] = { + 84, 88, + 84, 261, + 84, 3360, + 347, 347, + 347, 348, +}; +const uint8_t code_eu051Codes[] = { + 0x60, + 0x82, + 0x00, + 0x20, + 0x80, + 0x41, + 0x04, + 0x90, + 0x41, + 0x2A, + 0x02, + 0x08, + 0x00, + 0x82, + 0x01, + 0x04, + 0x12, + 0x41, + 0x04, + 0x80, +}; +const struct IrCode code_eu051Code = { + freq_to_timerval(38462), + 52, // # of pairs + 3, // # of bits per index + code_eu051Times, + code_eu051Codes +};// Duplicate IR Code? - Similar to NA115 + +const uint16_t code_eu052Times[] = { + 16, 838, + 17, 558, + 17, 839, + 17, 6328, +}; +const uint8_t code_eu052Codes[] = { + 0x1A, + 0x9A, + 0x9B, + 0x9A, + 0x9A, + 0x99, +}; +const struct IrCode code_eu052Code = { + freq_to_timerval(31250), + 24, // # of pairs + 2, // # of bits per index + code_eu052Times, + code_eu052Codes +};// Duplicate IR Code? - Similar to EU017 + + +/* Duplicate timing table, same as eu046 ! + const uint16_t code_eu053Times[] = { + 15, 493, + 16, 493, + 16, 698, + 16, 1414, + }; + */ +const uint8_t code_eu053Codes[] = { + 0x26, + 0xAB, + 0x66, + 0xAA, +}; +const struct IrCode code_eu053Code = { + freq_to_timerval(34483), + 16, // # of pairs + 2, // # of bits per index + code_eu046Times, + code_eu053Codes +}; +const uint16_t code_eu054Times[] = { + 49, 53, + 49, 104, + 49, 262, + 49, 264, + 49, 8030, + 100, 103, +}; +const uint8_t code_eu054Codes[] = { + 0x40, + 0x1A, + 0x23, + 0x00, + 0xD0, + 0x80, +}; +const struct IrCode code_eu054Code = { + freq_to_timerval(31250), + 14, // # of pairs + 3, // # of bits per index + code_eu054Times, + code_eu054Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_eu055Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_eu055Codes[] = { + 0x80, + 0x00, + 0x00, + 0x20, + 0x92, + 0x49, + 0x00, + 0x02, + 0x40, + 0x04, + 0x90, + 0x09, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_eu055Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_eu055Codes +}; +const uint16_t code_eu056Times[] = { + 112, 107, + 113, 107, + 677, 2766, +}; +const uint8_t code_eu056Codes[] = { + 0x26, +}; +const struct IrCode code_eu056Code = { + freq_to_timerval(38462), + 4, // # of pairs + 2, // # of bits per index + code_eu056Times, + code_eu056Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu057Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +/* +const uint8_t code_eu057Codes[] = { + 0xA0, + 0x00, + 0x41, + 0x04, + 0x92, + 0x08, + 0x20, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2B, + 0x3D, + 0x00, + }; + const struct IrCode code_eu057Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu057Codes + }; // Duplicate IR code - same as EU008 + */ +/* Duplicate timing table, same as na009 ! + const uint16_t code_eu058Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_eu058Codes[] = { + 0x80, + 0x00, + 0x00, + 0x24, + 0x10, + 0x49, + 0x00, + 0x82, + 0x00, + 0x04, + 0x10, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_eu058Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_eu058Codes +}; +const uint16_t code_eu059Times[] = { + 310, 613, + 310, 614, + 622, 8312, +}; +const uint8_t code_eu059Codes[] = { + 0x26, +}; +const struct IrCode code_eu059Code = { + freq_to_timerval(41667), + 4, // # of pairs + 2, // # of bits per index + code_eu059Times, + code_eu059Codes +};// Duplicate IR Code? - Similar to EU056 + +const uint16_t code_eu060Times[] = { + 50, 158, + 53, 51, + 53, 156, + 53, 2180, +}; +const uint8_t code_eu060Codes[] = { + 0x25, + 0x59, + 0x9A, + 0x5A, + 0xE9, + 0x56, + 0x66, + 0x96, + 0xA0, +}; +const struct IrCode code_eu060Code = { + freq_to_timerval(38462), + 34, // # of pairs + 2, // # of bits per index + code_eu060Times, + code_eu060Codes +}; + +/* Duplicate timing table, same as na005 ! + const uint16_t code_eu061Times[] = { + 88, 90, + 88, 91, + 88, 181, + 88, 8976, + 177, 91, + }; + */ +const uint8_t code_eu061Codes[] = { + 0x10, + 0x92, + 0x54, + 0x24, + 0xB3, + 0x09, + 0x25, + 0x42, + 0x48, +}; +const struct IrCode code_eu061Code = { + freq_to_timerval(35714), + 24, // # of pairs + 3, // # of bits per index + code_na005Times, + code_eu061Codes +}; + +/* Duplicate timing table, same as eu060 ! + const uint16_t code_eu062Times[] = { + 50, 158, + 53, 51, + 53, 156, + 53, 2180, + }; + */ +const uint8_t code_eu062Codes[] = { + 0x25, + 0x99, + 0x9A, + 0x5A, + 0xE9, + 0x66, + 0x66, + 0x96, + 0xA0, +}; +const struct IrCode code_eu062Code = { + freq_to_timerval(38462), + 34, // # of pairs + 2, // # of bits per index + code_eu060Times, + code_eu062Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_eu063Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_eu063Codes[] = { + 0x80, + 0x00, + 0x00, + 0x24, + 0x90, + 0x41, + 0x00, + 0x82, + 0x00, + 0x04, + 0x10, + 0x49, + 0x2A, + 0xBA, + 0x00, +}; +const struct IrCode code_eu063Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_eu063Codes +}; +const uint16_t code_eu064Times[] = { + 47, 267, + 50, 55, + 50, 110, + 50, 265, + 50, 2055, + 50, 12117, + 100, 57, + 100, 112, +}; +const uint8_t code_eu064Codes[] = { + 0x04, + 0x92, + 0x49, + 0x26, + 0x32, + 0x51, + 0xCB, + 0xD6, + 0x4A, + 0x39, + 0x72, +}; +const struct IrCode code_eu064Code = { + freq_to_timerval(30395), + 29, // # of pairs + 3, // # of bits per index + code_eu064Times, + code_eu064Codes +}; +const uint16_t code_eu065Times[] = { + 47, 267, + 50, 55, + 50, 110, + 50, 265, + 50, 2055, + 50, 12117, + 100, 112, +}; +const uint8_t code_eu065Codes[] = { + 0x04, + 0x92, + 0x49, + 0x26, + 0x32, + 0x4A, + 0x38, + 0x9A, + 0xC9, + 0x28, + 0xE2, + 0x48, +}; +const struct IrCode code_eu065Code = { + freq_to_timerval(30303), + 31, // # of pairs + 3, // # of bits per index + code_eu065Times, + code_eu065Codes +}; + +/* Duplicate timing table, same as eu049 ! + const uint16_t code_eu066Times[] = { + 55, 55, + 55, 167, + 55, 4577, + 55, 9506, + 448, 445, + 450, 444, + }; + */ +const uint8_t code_eu066Codes[] = { + 0x84, + 0x82, + 0x00, + 0x04, + 0x82, + 0x00, + 0x00, + 0x82, + 0x00, + 0x04, + 0x10, + 0x49, + 0x2A, + 0x87, + 0x41, +}; +const struct IrCode code_eu066Code = { + freq_to_timerval(38462), + 40, // # of pairs + 3, // # of bits per index + code_eu049Times, + code_eu066Codes +}; +const uint16_t code_eu067Times[] = { + 94, 473, + 94, 728, + 102, 1637, +}; +const uint8_t code_eu067Codes[] = { + 0x41, + 0x24, + 0x12, +}; +const struct IrCode code_eu067Code = { + freq_to_timerval(38462), + 12, // # of pairs + 2, // # of bits per index + code_eu067Times, + code_eu067Codes +}; +const uint16_t code_eu068Times[] = { + 49, 263, + 50, 54, + 50, 108, + 50, 263, + 50, 2029, + 50, 10199, + 100, 110, +}; +const uint8_t code_eu068Codes[] = { + 0x04, + 0x92, + 0x49, + 0x26, + 0x34, + 0x49, + 0x38, + 0x9A, + 0xD1, + 0x24, + 0xE2, + 0x48, +}; +const struct IrCode code_eu068Code = { + freq_to_timerval(38610), + 31, // # of pairs + 3, // # of bits per index + code_eu068Times, + code_eu068Codes +}; +const uint16_t code_eu069Times[] = { + 4, 499, + 4, 750, + 4, 4999, +}; +const uint8_t code_eu069Codes[] = { + 0x05, + 0x54, + 0x06, + 0x05, + 0x54, + 0x04, +}; +const struct IrCode code_eu069Code = { + 0, // Non-pulsed code + 23, // # of pairs + 2, // # of bits per index + code_eu069Times, + code_eu069Codes +}; + +/* Duplicate timing table, same as eu069 ! + const uint16_t code_eu070Times[] = { + 4, 499, + 4, 750, + 4, 4999, + }; + */ +const uint8_t code_eu070Codes[] = { + 0x14, + 0x54, + 0x06, + 0x14, + 0x54, + 0x04, +}; +const struct IrCode code_eu070Code = { + 0, // Non-pulsed code + 23, // # of pairs + 2, // # of bits per index + code_eu069Times, + code_eu070Codes +}; +const uint16_t code_eu071Times[] = { + 14, 491, + 14, 743, + 14, 4422, +}; +const uint8_t code_eu071Codes[] = { + 0x45, + 0x44, + 0x56, + 0x45, + 0x44, + 0x55, +}; +const struct IrCode code_eu071Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu071Times, + code_eu071Codes +}; +const uint16_t code_eu072Times[] = { + 5, 568, + 5, 854, + 5, 4999, +}; +const uint8_t code_eu072Codes[] = { + 0x55, + 0x45, + 0x46, + 0x55, + 0x45, + 0x44, +}; +const struct IrCode code_eu072Code = { + 0, // Non-pulsed code + 23, // # of pairs + 2, // # of bits per index + code_eu072Times, + code_eu072Codes +}; + +/* Duplicate timing table, same as eu046 ! + const uint16_t code_eu073Times[] = { + 15, 493, + 16, 493, + 16, 698, + 16, 1414, + }; + */ +const uint8_t code_eu073Codes[] = { + 0x19, + 0x57, + 0x59, + 0x55, +}; +const struct IrCode code_eu073Code = { + freq_to_timerval(34483), + 16, // # of pairs + 2, // # of bits per index + code_eu046Times, + code_eu073Codes +}; + +/* Duplicate timing table, same as na031 ! + const uint16_t code_eu074Times[] = { + 88, 89, + 88, 90, + 88, 179, + 88, 8977, + 177, 90, + }; + */ +const uint8_t code_eu074Codes[] = { + 0x04, + 0x92, + 0x49, + 0x28, + 0xC6, + 0x49, + 0x24, + 0x92, + 0x51, + 0x80, +}; +const struct IrCode code_eu074Code = { + freq_to_timerval(35714), + 26, // # of pairs + 3, // # of bits per index + code_na031Times, + code_eu074Codes +}; +const uint16_t code_eu075Times[] = { + 6, 566, + 6, 851, + 6, 5474, +}; +const uint8_t code_eu075Codes[] = { + 0x05, + 0x45, + 0x46, + 0x05, + 0x45, + 0x44, +}; +const struct IrCode code_eu075Code = { + 0, // Non-pulsed code + 23, // # of pairs + 2, // # of bits per index + code_eu075Times, + code_eu075Codes +}; +const uint16_t code_eu076Times[] = { + 14, 843, + 16, 555, + 16, 841, + 16, 4911, +}; +const uint8_t code_eu076Codes[] = { + 0x2A, + 0x9A, + 0x9B, + 0xAA, + 0x9A, + 0x9A, +}; +const struct IrCode code_eu076Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu076Times, + code_eu076Codes +}; + +/* Duplicate timing table, same as eu028 ! + const uint16_t code_eu077Times[] = { + 47, 267, + 50, 55, + 50, 110, + 50, 265, + 50, 2055, + 50, 12117, + 100, 57, + }; + */ +const uint8_t code_eu077Codes[] = { + 0x04, + 0x92, + 0x49, + 0x26, + 0x32, + 0x51, + 0xC8, + 0x9A, + 0xC9, + 0x47, + 0x22, + 0x48, +}; +const struct IrCode code_eu077Code = { + freq_to_timerval(30303), + 31, // # of pairs + 3, // # of bits per index + code_eu028Times, + code_eu077Codes +}; +const uint16_t code_eu078Times[] = { + 6, 925, + 6, 1339, + 6, 2098, + 6, 2787, +}; +const uint8_t code_eu078Codes[] = { + 0x90, + 0x0D, + 0x00, +}; +const struct IrCode code_eu078Code = { + 0, // Non-pulsed code + 12, // # of pairs + 2, // # of bits per index + code_eu078Times, + code_eu078Codes +}; +const uint16_t code_eu079Times[] = { + 53, 59, + 53, 170, + 53, 4359, + 892, 448, + 893, 448, +}; +const uint8_t code_eu079Codes[] = { + 0x60, + 0x00, + 0x00, + 0x24, + 0x80, + 0x09, + 0x04, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0x00, + 0x00, + 0x00, + 0x92, + 0x00, + 0x24, + 0x12, + 0x48, + 0x00, + 0x00, + 0x01, + 0x24, + 0x80, +}; +const struct IrCode code_eu079Code = { + freq_to_timerval(38462), + 68, // # of pairs + 3, // # of bits per index + code_eu079Times, + code_eu079Codes +}; +const uint16_t code_eu080Times[] = { + 55, 57, + 55, 167, + 55, 4416, + 895, 448, + 897, 447, +}; +const uint8_t code_eu080Codes[] = { + 0x60, + 0x00, + 0x00, + 0x20, + 0x10, + 0x09, + 0x04, + 0x02, + 0x01, + 0x00, + 0x90, + 0x48, + 0x2A, + 0x00, + 0x00, + 0x00, + 0x80, + 0x40, + 0x24, + 0x10, + 0x08, + 0x04, + 0x02, + 0x41, + 0x20, + 0x80, +}; +const struct IrCode code_eu080Code = { + freq_to_timerval(38462), + 68, // # of pairs + 3, // # of bits per index + code_eu080Times, + code_eu080Codes +}; + +const uint16_t code_eu081Times[] = { + 26, 185, + 27, 80, + 27, 185, + 27, 4249, +}; +const uint8_t code_eu081Codes[] = { + 0x1A, + 0x5A, + 0x65, + 0x67, + 0x9A, + 0x65, + 0x9A, + 0x9B, + 0x9A, + 0x5A, + 0x65, + 0x67, + 0x9A, + 0x65, + 0x9A, + 0x9B, + 0x9A, + 0x5A, + 0x65, + 0x65, +}; +const struct IrCode code_eu081Code = { + freq_to_timerval(38462), + 80, // # of pairs + 2, // # of bits per index + code_eu081Times, + code_eu081Codes +}; +const uint16_t code_eu082Times[] = { + 51, 56, + 51, 162, + 51, 2842, + 848, 430, + 850, 429, +}; +const uint8_t code_eu082Codes[] = { + 0x60, + 0x82, + 0x08, + 0x24, + 0x10, + 0x41, + 0x04, + 0x82, + 0x40, + 0x00, + 0x10, + 0x09, + 0x2A, + 0x02, + 0x08, + 0x20, + 0x90, + 0x41, + 0x04, + 0x12, + 0x09, + 0x00, + 0x00, + 0x40, + 0x24, + 0x80, +}; +const struct IrCode code_eu082Code = { + freq_to_timerval(40000), + 68, // # of pairs + 3, // # of bits per index + code_eu082Times, + code_eu082Codes +}; +const uint16_t code_eu083Times[] = { + 16, 559, + 16, 847, + 16, 5900, + 17, 559, + 17, 847, +}; +const uint8_t code_eu083Codes[] = { + 0x0E, + 0x38, + 0x21, + 0x82, + 0x26, + 0x20, + 0x82, + 0x48, + 0x23, +}; +const struct IrCode code_eu083Code = { + freq_to_timerval(33333), + 24, // # of pairs + 3, // # of bits per index + code_eu083Times, + code_eu083Codes +}; +const uint16_t code_eu084Times[] = { + 16, 484, + 16, 738, + 16, 739, + 16, 4795, +}; +const uint8_t code_eu084Codes[] = { + 0x6A, + 0xA0, + 0x03, + 0xAA, + 0xA0, + 0x01, +}; +const struct IrCode code_eu084Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu084Times, + code_eu084Codes +}; +const uint16_t code_eu085Times[] = { + 48, 52, + 48, 160, + 48, 400, + 48, 2120, + 799, 400, +}; +const uint8_t code_eu085Codes[] = { + 0x84, + 0x82, + 0x40, + 0x08, + 0x92, + 0x48, + 0x01, + 0xC2, + 0x41, + 0x20, + 0x04, + 0x49, + 0x24, + 0x00, + 0x40, +}; +const struct IrCode code_eu085Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_eu085Times, + code_eu085Codes +}; +const uint16_t code_eu086Times[] = { + 16, 851, + 17, 554, + 17, 850, + 17, 851, + 17, 4847, +}; +const uint8_t code_eu086Codes[] = { + 0x45, + 0x86, + 0x5B, + 0x05, + 0xC6, + 0x5B, + 0x05, + 0xB0, + 0x42, +}; +const struct IrCode code_eu086Code = { + freq_to_timerval(33333), + 24, // # of pairs + 3, // # of bits per index + code_eu086Times, + code_eu086Codes +}; +const uint16_t code_eu087Times[] = { + 14, 491, + 14, 743, + 14, 5126, +}; +const uint8_t code_eu087Codes[] = { + 0x55, + 0x50, + 0x02, + 0x55, + 0x50, + 0x01, +}; +const struct IrCode code_eu087Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu087Times, + code_eu087Codes +}; +const uint16_t code_eu088Times[] = { + 14, 491, + 14, 743, + 14, 4874, +}; +const uint8_t code_eu088Codes[] = { + 0x45, + 0x54, + 0x42, + 0x45, + 0x54, + 0x41, +}; +const struct IrCode code_eu088Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu088Times, + code_eu088Codes +}; + +/* Duplicate timing table, same as na021 ! + const uint16_t code_eu089Times[] = { + 48, 52, + 48, 160, + 48, 400, + 48, 2335, + 799, 400, + }; + */ +const uint8_t code_eu089Codes[] = { + 0x84, + 0x10, + 0x40, + 0x08, + 0x82, + 0x08, + 0x01, + 0xC2, + 0x08, + 0x20, + 0x04, + 0x41, + 0x04, + 0x00, + 0x40, +}; +const struct IrCode code_eu089Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na021Times, + code_eu089Codes +}; +const uint16_t code_eu090Times[] = { + 3, 9, + 3, 19, + 3, 29, + 3, 39, + 3, 9968, +}; +const uint8_t code_eu090Codes[] = { + 0x60, + 0x00, + 0x88, + 0x00, + 0x02, + 0xE3, + 0x00, + 0x04, + 0x40, + 0x00, + 0x16, +}; +const struct IrCode code_eu090Code = { + 0, // Non-pulsed code + 29, // # of pairs + 3, // # of bits per index + code_eu090Times, + code_eu090Codes +}; +const uint16_t code_eu091Times[] = { + 15, 138, + 15, 446, + 15, 605, + 15, 6565, +}; +const uint8_t code_eu091Codes[] = { + 0x80, + 0x01, + 0x00, + 0x2E, + 0x00, + 0x04, + 0x00, + 0xA0, +}; +const struct IrCode code_eu091Code = { + freq_to_timerval(38462), + 30, // # of pairs + 2, // # of bits per index + code_eu091Times, + code_eu091Codes +}; +const uint16_t code_eu092Times[] = { + 48, 50, + 48, 148, + 48, 149, + 48, 1424, +}; +const uint8_t code_eu092Codes[] = { + 0x48, + 0x80, + 0x0E, + 0x22, + 0x00, + 0x10, +}; +const struct IrCode code_eu092Code = { + freq_to_timerval(40000), + 22, // # of pairs + 2, // # of bits per index + code_eu092Times, + code_eu092Codes +}; +const uint16_t code_eu093Times[] = { + 87, 639, + 88, 275, + 88, 639, +}; +const uint8_t code_eu093Codes[] = { + 0x15, + 0x9A, + 0x94, +}; +const struct IrCode code_eu093Code = { + freq_to_timerval(35714), + 11, // # of pairs + 2, // # of bits per index + code_eu093Times, + code_eu093Codes +}; +const uint16_t code_eu094Times[] = { + 3, 8, + 3, 18, + 3, 24, + 3, 38, + 3, 9969, +}; +const uint8_t code_eu094Codes[] = { + 0x60, + 0x80, + 0x88, + 0x00, + 0x00, + 0xE3, + 0x04, + 0x04, + 0x40, + 0x00, + 0x06, +}; +const struct IrCode code_eu094Code = { + 0, // Non-pulsed code + 29, // # of pairs + 3, // # of bits per index + code_eu094Times, + code_eu094Codes +}; + +/* Duplicate timing table, same as eu046 ! + const uint16_t code_eu095Times[] = { + 15, 493, + 16, 493, + 16, 698, + 16, 1414, + }; + */ +const uint8_t code_eu095Codes[] = { + 0x2A, + 0xAB, + 0x6A, + 0xAA, +}; +const struct IrCode code_eu095Code = { + freq_to_timerval(34483), + 16, // # of pairs + 2, // # of bits per index + code_eu046Times, + code_eu095Codes +}; +const uint16_t code_eu096Times[] = { + 13, 608, + 14, 141, + 14, 296, + 14, 451, + 14, 606, + 14, 608, + 14, 6207, +}; +const uint8_t code_eu096Codes[] = { + 0x04, + 0x94, + 0x4B, + 0x24, + 0x95, + 0x35, + 0x24, + 0xA2, + 0x59, + 0x24, + 0xA8, + 0x40, +}; +const struct IrCode code_eu096Code = { + freq_to_timerval(38462), + 30, // # of pairs + 3, // # of bits per index + code_eu096Times, + code_eu096Codes +}; + +/* Duplicate timing table, same as eu046 ! + const uint16_t code_eu097Times[] = { + 15, 493, + 16, 493, + 16, 698, + 16, 1414, + }; + */ +const uint8_t code_eu097Codes[] = { + 0x19, + 0xAB, + 0x59, + 0xA9, +}; +const struct IrCode code_eu097Code = { + freq_to_timerval(34483), + 16, // # of pairs + 2, // # of bits per index + code_eu046Times, + code_eu097Codes +}; +const uint16_t code_eu098Times[] = { + 3, 8, + 3, 18, + 3, 28, + 3, 12731, +}; +const uint8_t code_eu098Codes[] = { + 0x80, + 0x01, + 0x00, + 0xB8, + 0x55, + 0x10, + 0x08, +}; +const struct IrCode code_eu098Code = { + 0, // Non-pulsed code + 27, // # of pairs + 2, // # of bits per index + code_eu098Times, + code_eu098Codes +}; +const uint16_t code_eu099Times[] = { + 46, 53, + 46, 106, + 46, 260, + 46, 1502, + 46, 10962, + 93, 53, + 93, 106, +}; +const uint8_t code_eu099Codes[] = { + 0x46, + 0x80, + 0x00, + 0x00, + 0x00, + 0x03, + 0x44, + 0x52, + 0x00, + 0x00, + 0x0C, + 0x22, + 0x22, + 0x90, + 0x00, + 0x00, + 0x60, + 0x80, +}; +const struct IrCode code_eu099Code = { + freq_to_timerval(35714), + 46, // # of pairs + 3, // # of bits per index + code_eu099Times, + code_eu099Codes +}; + + +/* Duplicate timing table, same as eu098 ! + const uint16_t code_eu100Times[] = { + 3, 8, + 3, 18, + 3, 28, + 3, 12731, + }; + */ +const uint8_t code_eu100Codes[] = { + 0x80, + 0x04, + 0x00, + 0xB8, + 0x55, + 0x40, + 0x08, +}; +const struct IrCode code_eu100Code = { + 0, // Non-pulsed code + 27, // # of pairs + 2, // # of bits per index + code_eu098Times, + code_eu100Codes +}; + + + +const uint16_t code_eu101Times[] = { + 14, 491, + 14, 743, + 14, 4674, +}; +const uint8_t code_eu101Codes[] = { + 0x55, + 0x50, + 0x06, + 0x55, + 0x50, + 0x05, +}; +const struct IrCode code_eu101Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu101Times, + code_eu101Codes +}; + +/* Duplicate timing table, same as eu087 ! + const uint16_t code_eu102Times[] = { + 14, 491, + 14, 743, + 14, 5126, + }; + */ +const uint8_t code_eu102Codes[] = { + 0x45, + 0x54, + 0x02, + 0x45, + 0x54, + 0x01, +}; +const struct IrCode code_eu102Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu087Times, + code_eu102Codes +}; +const uint16_t code_eu103Times[] = { + 44, 815, + 45, 528, + 45, 815, + 45, 5000, +}; +const uint8_t code_eu103Codes[] = { + 0x29, + 0x9A, + 0x9B, + 0xA9, + 0x9A, + 0x9A, +}; +const struct IrCode code_eu103Code = { + freq_to_timerval(34483), + 24, // # of pairs + 2, // # of bits per index + code_eu103Times, + code_eu103Codes +}; +const uint16_t code_eu104Times[] = { + 14, 491, + 14, 743, + 14, 5881, +}; +const uint8_t code_eu104Codes[] = { + 0x44, + 0x40, + 0x02, + 0x44, + 0x40, + 0x01, +}; +const struct IrCode code_eu104Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu104Times, + code_eu104Codes +}; + +/* Duplicate timing table, same as na009 ! + const uint16_t code_eu105Times[] = { + 53, 56, + 53, 171, + 53, 3950, + 53, 9599, + 898, 451, + 900, 226, + }; + */ +const uint8_t code_eu105Codes[] = { + 0x84, + 0x10, + 0x00, + 0x20, + 0x90, + 0x01, + 0x00, + 0x80, + 0x40, + 0x04, + 0x12, + 0x09, + 0x2A, + 0xBA, + 0x40, +}; +const struct IrCode code_eu105Code = { + freq_to_timerval(38610), + 38, // # of pairs + 3, // # of bits per index + code_na009Times, + code_eu105Codes +}; +const uint16_t code_eu106Times[] = { + 48, 246, + 50, 47, + 50, 94, + 50, 245, + 50, 1488, + 50, 10970, + 100, 47, + 100, 94, +}; +const uint8_t code_eu106Codes[] = { + 0x0B, + 0x12, + 0x49, + 0x24, + 0x92, + 0x49, + 0x8D, + 0x1C, + 0x89, + 0x27, + 0xFC, + 0xAB, + 0x47, + 0x22, + 0x49, + 0xFF, + 0x2A, + 0xD1, + 0xC8, + 0x92, + 0x7F, + 0xC9, + 0x00, +}; +const struct IrCode code_eu106Code = { + freq_to_timerval(38462), + 59, // # of pairs + 3, // # of bits per index + code_eu106Times, + code_eu106Codes +}; +const uint16_t code_eu107Times[] = { + 16, 847, + 16, 5900, + 17, 559, + 17, 846, + 17, 847, +}; +const uint8_t code_eu107Codes[] = { + 0x62, + 0x08, + 0xA0, + 0x8A, + 0x19, + 0x04, + 0x08, + 0x40, + 0x83, +}; +const struct IrCode code_eu107Code = { + freq_to_timerval(33333), + 24, // # of pairs + 3, // # of bits per index + code_eu107Times, + code_eu107Codes +}; +const uint16_t code_eu108Times[] = { + 14, 491, + 14, 743, + 14, 4622, +}; +const uint8_t code_eu108Codes[] = { + 0x45, + 0x54, + 0x16, + 0x45, + 0x54, + 0x15, +}; +const struct IrCode code_eu108Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu108Times, + code_eu108Codes +}; +const uint16_t code_eu109Times[] = { + 24, 185, + 27, 78, + 27, 183, + 27, 1542, +}; +const uint8_t code_eu109Codes[] = { + 0x19, + 0x95, + 0x5E, + 0x66, + 0x55, + 0x50, +}; +const struct IrCode code_eu109Code = { + freq_to_timerval(38462), + 22, // # of pairs + 2, // # of bits per index + code_eu109Times, + code_eu109Codes +}; + + +const uint16_t code_eu110Times[] = { + 56, 55, + 56, 168, + 56, 4850, + 447, 453, + 448, 453, +}; +const uint8_t code_eu110Codes[] = { + 0x64, + 0x10, + 0x00, + 0x04, + 0x10, + 0x00, + 0x00, + 0x80, + 0x00, + 0x04, + 0x12, + 0x49, + 0x2A, + 0x10, + 0x40, + 0x00, + 0x10, + 0x40, + 0x00, + 0x02, + 0x00, + 0x00, + 0x10, + 0x49, + 0x24, + 0x90, +}; +const struct IrCode code_eu110Code = { + freq_to_timerval(38462), + 68, // # of pairs + 3, // # of bits per index + code_eu110Times, + code_eu110Codes +}; +const uint16_t code_eu111Times[] = { + 49, 52, + 49, 250, + 49, 252, + 49, 2377, + 49, 12009, + 100, 52, + 100, 102, +}; +const uint8_t code_eu111Codes[] = { + 0x22, + 0x80, + 0x1A, + 0x18, + 0x01, + 0x10, + 0xC0, + 0x02, +}; +const struct IrCode code_eu111Code = { + freq_to_timerval(31250), + 21, // # of pairs + 3, // # of bits per index + code_eu111Times, + code_eu111Codes +}; +const uint16_t code_eu112Times[] = { + 55, 55, + 55, 167, + 55, 5023, + 55, 9506, + 448, 445, + 450, 444, +}; +const uint8_t code_eu112Codes[] = { + 0x80, + 0x02, + 0x00, + 0x00, + 0x02, + 0x00, + 0x04, + 0x92, + 0x00, + 0x00, + 0x00, + 0x49, + 0x2A, + 0x97, + 0x48, +}; +const struct IrCode code_eu112Code = { + freq_to_timerval(38462), + 40, // # of pairs + 3, // # of bits per index + code_eu112Times, + code_eu112Codes +}; + + +/* Duplicate timing table, same as eu054 ! + const uint16_t code_eu113Times[] = { + 49, 53, + 49, 104, + 49, 262, + 49, 264, + 49, 8030, + 100, 103, + }; + */ +const uint8_t code_eu113Codes[] = { + 0x46, + 0x80, + 0x23, + 0x34, + 0x00, + 0x80, +}; +const struct IrCode code_eu113Code = { + freq_to_timerval(31250), + 14, // # of pairs + 3, // # of bits per index + code_eu054Times, + code_eu113Codes +}; + +/* Duplicate timing table, same as eu028 ! + const uint16_t code_eu114Times[] = { + 47, 267, + 50, 55, + 50, 110, + 50, 265, + 50, 2055, + 50, 12117, + 100, 57, + }; + */ +const uint8_t code_eu114Codes[] = { + 0x04, + 0x92, + 0x49, + 0x26, + 0x34, + 0x71, + 0x44, + 0x9A, + 0xD1, + 0xC5, + 0x12, + 0x48, +}; +const struct IrCode code_eu114Code = { + freq_to_timerval(30303), + 31, // # of pairs + 3, // # of bits per index + code_eu028Times, + code_eu114Codes +}; + + +const uint16_t code_eu115Times[] = { + 48, 98, + 48, 196, + 97, 836, + 395, 388, + 1931, 389, +}; +const uint8_t code_eu115Codes[] = { + 0x84, + 0x92, + 0x01, + 0x24, + 0x12, + 0x00, + 0x04, + 0x80, + 0x08, + 0x09, + 0x92, + 0x48, + 0x04, + 0x90, + 0x48, + 0x00, + 0x12, + 0x00, + 0x20, + 0x26, + 0x49, + 0x20, + 0x12, + 0x41, + 0x20, + 0x00, + 0x48, + 0x00, + 0x82, +}; +const struct IrCode code_eu115Code = { + freq_to_timerval(58824), + 77, // # of pairs + 3, // # of bits per index + code_eu115Times, + code_eu115Codes +}; +const uint16_t code_eu116Times[] = { + 3, 9, + 3, 31, + 3, 42, + 3, 10957, +}; +const uint8_t code_eu116Codes[] = { + 0x80, + 0x01, + 0x00, + 0x2E, + 0x00, + 0x04, + 0x00, + 0x80, +}; +const struct IrCode code_eu116Code = { + 0, // Non-pulsed code + 29, // # of pairs + 2, // # of bits per index + code_eu116Times, + code_eu116Codes +}; +const uint16_t code_eu117Times[] = { + 49, 53, + 49, 262, + 49, 264, + 49, 8030, + 100, 103, +}; +const uint8_t code_eu117Codes[] = { + 0x22, + 0x00, + 0x1A, + 0x10, + 0x00, + 0x40, +}; +const struct IrCode code_eu117Code = { + freq_to_timerval(31250), + 14, // # of pairs + 3, // # of bits per index + code_eu117Times, + code_eu117Codes +}; +const uint16_t code_eu118Times[] = { + 44, 815, + 45, 528, + 45, 815, + 45, 4713, +}; +const uint8_t code_eu118Codes[] = { + 0x2A, + 0x9A, + 0x9B, + 0xAA, + 0x9A, + 0x9A, +}; +const struct IrCode code_eu118Code = { + freq_to_timerval(34483), + 24, // # of pairs + 2, // # of bits per index + code_eu118Times, + code_eu118Codes +}; + +const uint16_t code_eu119Times[] = { + 14, 491, + 14, 743, + 14, 5430, +}; +const uint8_t code_eu119Codes[] = { + 0x44, + 0x44, + 0x02, + 0x44, + 0x44, + 0x01, +}; +const struct IrCode code_eu119Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu119Times, + code_eu119Codes +}; + + +const uint16_t code_eu120Times[] = { + 19, 78, + 21, 27, + 21, 77, + 21, 3785, + 22, 0, +}; +const uint8_t code_eu120Codes[] = { + 0x09, + 0x24, + 0x92, + 0x49, + 0x12, + 0x4A, + 0x24, + 0x92, + 0x49, + 0x24, + 0x92, + 0x49, + 0x24, + 0x94, + 0x89, + 0x69, + 0x24, + 0x92, + 0x49, + 0x22, + 0x49, + 0x44, + 0x92, + 0x49, + 0x24, + 0x92, + 0x49, + 0x24, + 0x92, + 0x91, + 0x30, +}; +const struct IrCode code_eu120Code = { + freq_to_timerval(38462), + 82, // # of pairs + 3, // # of bits per index + code_eu120Times, + code_eu120Codes +}; + +/* Duplicate timing table, same as eu051 ! + const uint16_t code_eu121Times[] = { + 84, 88, + 84, 261, + 84, 3360, + 347, 347, + 347, 348, + }; + */ +const uint8_t code_eu121Codes[] = { + 0x64, + 0x00, + 0x09, + 0x24, + 0x00, + 0x09, + 0x24, + 0x00, + 0x09, + 0x2A, + 0x10, + 0x00, + 0x24, + 0x90, + 0x00, + 0x24, + 0x90, + 0x00, + 0x24, + 0x90, +}; +const struct IrCode code_eu121Code = { + freq_to_timerval(38462), + 52, // # of pairs + 3, // # of bits per index + code_eu051Times, + code_eu121Codes +}; + +/* Duplicate timing table, same as eu120 ! + const uint16_t code_eu122Times[] = { + 19, 78, + 21, 27, + 21, 77, + 21, 3785, + 22, 0, + }; + */ +const uint8_t code_eu122Codes[] = { + 0x04, + 0xA4, + 0x92, + 0x49, + 0x22, + 0x49, + 0x48, + 0x92, + 0x49, + 0x24, + 0x92, + 0x49, + 0x24, + 0x94, + 0x89, + 0x68, + 0x94, + 0x92, + 0x49, + 0x24, + 0x49, + 0x29, + 0x12, + 0x49, + 0x24, + 0x92, + 0x49, + 0x24, + 0x92, + 0x91, + 0x30, +}; +const struct IrCode code_eu122Code = { + freq_to_timerval(38462), + 82, // # of pairs + 3, // # of bits per index + code_eu120Times, + code_eu122Codes +}; +const uint16_t code_eu123Times[] = { + 13, 490, + 13, 741, + 13, 742, + 13, 5443, +}; +const uint8_t code_eu123Codes[] = { + 0x6A, + 0xA0, + 0x0B, + 0xAA, + 0xA0, + 0x09, +}; +const struct IrCode code_eu123Code = { + freq_to_timerval(40000), + 24, // # of pairs + 2, // # of bits per index + code_eu123Times, + code_eu123Codes +}; +const uint16_t code_eu124Times[] = { + 50, 54, + 50, 158, + 50, 407, + 50, 2153, + 843, 407, +}; +const uint8_t code_eu124Codes[] = { + 0x80, + 0x10, + 0x40, + 0x08, + 0x92, + 0x48, + 0x01, + 0xC0, + 0x08, + 0x20, + 0x04, + 0x49, + 0x24, + 0x00, + 0x00, +}; +const struct IrCode code_eu124Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_eu124Times, + code_eu124Codes +}; +const uint16_t code_eu125Times[] = { + 55, 56, + 55, 168, + 55, 3929, + 56, 0, + 882, 454, + 884, 452, +}; +const uint8_t code_eu125Codes[] = { + 0x84, + 0x80, + 0x00, + 0x20, + 0x82, + 0x49, + 0x00, + 0x02, + 0x00, + 0x04, + 0x90, + 0x49, + 0x2A, + 0x92, + 0x00, + 0x00, + 0x82, + 0x09, + 0x24, + 0x00, + 0x08, + 0x00, + 0x12, + 0x41, + 0x24, + 0xB0, +}; +const struct IrCode code_eu125Code = { + freq_to_timerval(38462), + 68, // # of pairs + 3, // # of bits per index + code_eu125Times, + code_eu125Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu126Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu126Codes[] = { + 0xA0, + 0x00, + 0x00, + 0x04, + 0x92, + 0x49, + 0x20, + 0x00, + 0x00, + 0x04, + 0x92, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu126Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu126Codes +}; + +/* Duplicate timing table, same as eu087 ! + const uint16_t code_eu127Times[] = { + 14, 491, + 14, 743, + 14, 5126, + }; + */ +const uint8_t code_eu127Codes[] = { + 0x44, + 0x40, + 0x56, + 0x44, + 0x40, + 0x55, +}; +const struct IrCode code_eu127Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu087Times, + code_eu127Codes +}; +const uint16_t code_eu128Times[] = { + 152, 471, + 154, 156, + 154, 469, + 154, 782, + 154, 2947, +}; +const uint8_t code_eu128Codes[] = { + 0x05, + 0xC4, + 0x59, +}; +const struct IrCode code_eu128Code = { + freq_to_timerval(41667), + 8, // # of pairs + 3, // # of bits per index + code_eu128Times, + code_eu128Codes +}; +const uint16_t code_eu129Times[] = { + 50, 50, + 50, 99, + 50, 251, + 50, 252, + 50, 1449, + 50, 11014, + 102, 49, + 102, 98, +}; +const uint8_t code_eu129Codes[] = { + 0x47, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00, + 0x8C, + 0x8C, + 0x40, + 0x03, + 0xF1, + 0xEB, + 0x23, + 0x10, + 0x00, + 0xFC, + 0x74, +}; +const struct IrCode code_eu129Code = { + freq_to_timerval(38462), + 45, // # of pairs + 3, // # of bits per index + code_eu129Times, + code_eu129Codes +}; + +/* Duplicate timing table, same as eu129 ! + const uint16_t code_eu130Times[] = { + 50, 50, + 50, 99, + 50, 251, + 50, 252, + 50, 1449, + 50, 11014, + 102, 49, + 102, 98, + }; + */ +const uint8_t code_eu130Codes[] = { + 0x47, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00, + 0x8C, + 0x8C, + 0x40, + 0x03, + 0xE3, + 0xEB, + 0x23, + 0x10, + 0x00, + 0xF8, + 0xF4, +}; +const struct IrCode code_eu130Code = { + freq_to_timerval(38462), + 45, // # of pairs + 3, // # of bits per index + code_eu129Times, + code_eu130Codes +}; +const uint16_t code_eu131Times[] = { + 14, 491, + 14, 743, + 14, 4170, +}; +const uint8_t code_eu131Codes[] = { + 0x55, + 0x55, + 0x42, + 0x55, + 0x55, + 0x41, +}; +const struct IrCode code_eu131Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu131Times, + code_eu131Codes +}; + +/* Duplicate timing table, same as eu069 ! + const uint16_t code_eu132Times[] = { + 4, 499, + 4, 750, + 4, 4999, + }; + */ +const uint8_t code_eu132Codes[] = { + 0x05, + 0x50, + 0x06, + 0x05, + 0x50, + 0x04, +}; +const struct IrCode code_eu132Code = { + 0, // Non-pulsed code + 23, // # of pairs + 2, // # of bits per index + code_eu069Times, + code_eu132Codes +}; + +/* Duplicate timing table, same as eu071 ! + const uint16_t code_eu133Times[] = { + 14, 491, + 14, 743, + 14, 4422, + }; + */ +const uint8_t code_eu133Codes[] = { + 0x55, + 0x54, + 0x12, + 0x55, + 0x54, + 0x11, +}; +const struct IrCode code_eu133Code = { + freq_to_timerval(38462), + 24, // # of pairs + 2, // # of bits per index + code_eu071Times, + code_eu133Codes +}; +const uint16_t code_eu134Times[] = { + 13, 490, + 13, 741, + 13, 742, + 13, 5939, +}; +const uint8_t code_eu134Codes[] = { + 0x40, + 0x0A, + 0x83, + 0x80, + 0x0A, + 0x81, +}; +const struct IrCode code_eu134Code = { + freq_to_timerval(40000), + 24, // # of pairs + 2, // # of bits per index + code_eu134Times, + code_eu134Codes +}; +const uint16_t code_eu135Times[] = { + 6, 566, + 6, 851, + 6, 5188, +}; +const uint8_t code_eu135Codes[] = { + 0x54, + 0x45, + 0x46, + 0x54, + 0x45, + 0x44, +}; +const struct IrCode code_eu135Code = { + 0, // Non-pulsed code + 23, // # of pairs + 2, // # of bits per index + code_eu135Times, + code_eu135Codes +}; + +/* Duplicate timing table, same as na004 ! + const uint16_t code_eu136Times[] = { + 55, 57, + 55, 170, + 55, 3949, + 55, 9623, + 56, 0, + 898, 453, + 900, 226, + }; + */ +const uint8_t code_eu136Codes[] = { + 0xA0, + 0x00, + 0x00, + 0x04, + 0x92, + 0x49, + 0x24, + 0x00, + 0x00, + 0x00, + 0x92, + 0x49, + 0x2B, + 0x3D, + 0x00, +}; +const struct IrCode code_eu136Code = { + freq_to_timerval(38462), + 38, // # of pairs + 3, // # of bits per index + code_na004Times, + code_eu136Codes +}; +const uint16_t code_eu137Times[] = { + 86, 91, + 87, 90, + 87, 180, + 87, 8868, + 88, 0, + 174, 90, +}; +const uint8_t code_eu137Codes[] = { + 0x14, + 0x95, + 0x4A, + 0x35, + 0x9A, + 0x4A, + 0xA5, + 0x1B, + 0x00, +}; +const struct IrCode code_eu137Code = { + freq_to_timerval(35714), + 22, // # of pairs + 3, // # of bits per index + code_eu137Times, + code_eu137Codes +}; +const uint16_t code_eu138Times[] = { + 4, 1036, + 4, 1507, + 4, 3005, +}; +const uint8_t code_eu138Codes[] = { + 0x05, + 0x60, + 0x54, +}; +const struct IrCode code_eu138Code = { + 0, // Non-pulsed code + 11, // # of pairs + 2, // # of bits per index + code_eu138Times, + code_eu138Codes +}; + +const uint16_t code_eu139Times[] = { + 0, 0, + 14, 141, + 14, 452, + 14, 607, + 14, 6310, +}; +const uint8_t code_eu139Codes[] = { + 0x64, + 0x92, + 0x4A, + 0x24, + 0x92, + 0xE3, + 0x24, + 0x92, + 0x51, + 0x24, + 0x96, + 0x00, +}; + +const struct IrCode code_eu139Code = { + 0, // Non-pulsed code + 30, // # of pairs + 3, // # of bits per index + code_eu139Times, + code_eu139Codes +}; + +const uint16_t code_eu140Times[] = { + 448, 448, + 56, 168, + 56, 56, + 56, 4526, + }; + +const uint8_t code_eu140Codes[] = { + 0x15, + 0xAA, + 0x95, + 0xAA, + 0xAA, + 0x5A, + 0x55, + 0xA5, + 0xB1, + 0x5A, + 0xA9, + 0x5A, + 0xAA, + 0xA5, + 0xA5, + 0x5A, + 0x5B, +}; + +const struct IrCode code_eu140Code = { + freq_to_timerval(38462), + 68, // # of pairs + 2, // # of bits per index + code_eu140Times, + code_eu140Codes +}; + +//////////////////////////////////////////////////////////////// + +//const array (called "NApowerCodes") of const pointers to IrCode structs +//-otherwise stated: "declare NApowerCodes as array of const pointers to const IrCode structs" +//-to confirm this, go to http://cdecl.org/ and paste "const int* const NApowerCodes[]", and you'll +// see it means "declare NApowerCodes as array of const pointer to const int" +const IrCode* const NApowerCodes[] = { + &code_na000Code, + &code_na001Code, + &code_na002Code, + &code_na003Code, + &code_na004Code, + &code_na005Code, + &code_na006Code, + &code_na007Code, + &code_na008Code, + &code_na009Code, + &code_na010Code, + &code_na011Code, + &code_na012Code, + &code_na013Code, + &code_na014Code, + &code_na015Code, + &code_na016Code, + &code_na017Code, + &code_na018Code, + &code_na019Code, + &code_na020Code, + &code_na021Code, + &code_na022Code, + &code_na023Code, + &code_na024Code, + &code_na025Code, + &code_na026Code, + &code_na027Code, + &code_na028Code, + &code_na029Code, + &code_na030Code, + &code_na031Code, + &code_na032Code, + &code_na033Code, + &code_na034Code, + &code_na035Code, + &code_na036Code, + &code_na037Code, + &code_na038Code, + &code_na039Code, + &code_na040Code, + &code_na041Code, + &code_na042Code, + &code_na043Code, + &code_na044Code, + &code_na045Code, + &code_na046Code, + &code_na047Code, + &code_na048Code, + &code_na049Code, + &code_na050Code, + &code_na051Code, + &code_na052Code, + &code_na053Code, + &code_na054Code, + &code_na055Code, + &code_na056Code, + &code_na057Code, + &code_na058Code, + &code_na059Code, + &code_na060Code, + &code_na061Code, + &code_na062Code, + &code_na063Code, + &code_na064Code, + &code_na065Code, + &code_na066Code, + &code_na067Code, + &code_na068Code, + &code_na069Code, + &code_na070Code, + &code_na071Code, + &code_na072Code, + &code_na073Code, + &code_na074Code, + &code_na075Code, + &code_na076Code, + &code_na077Code, + &code_na078Code, + &code_na079Code, + &code_na080Code, + &code_na081Code, + &code_na082Code, + &code_na083Code, + &code_na084Code, + &code_na085Code, + &code_na086Code, + &code_na087Code, + &code_na088Code, + &code_na089Code, + &code_na090Code, + &code_na091Code, + &code_na092Code, + &code_na093Code, + &code_na094Code, + &code_na095Code, + &code_na096Code, + &code_na097Code, + &code_na098Code, + &code_na099Code, + &code_na100Code, + &code_na101Code, + &code_na102Code, + &code_na103Code, + &code_na104Code, + &code_na105Code, + &code_na106Code, + &code_na107Code, + &code_na108Code, + &code_na109Code, + &code_na110Code, + &code_na111Code, + &code_na112Code, + &code_na113Code, + &code_na114Code, + &code_na115Code, + &code_na116Code, + &code_na117Code, + &code_na118Code, + &code_na119Code, + &code_na120Code, + &code_na121Code, + &code_na122Code, + &code_na123Code, + &code_na124Code, + &code_na125Code, + &code_na126Code, + &code_na127Code, + &code_na128Code, + &code_na129Code, + &code_na130Code, + &code_na131Code, + &code_na132Code, + &code_na133Code, + &code_na134Code, + &code_na135Code, + &code_na136Code, +}; + +const IrCode* const EUpowerCodes[] = { + &code_eu000Code, + &code_eu001Code, + &code_eu002Code, + &code_na000Code, // same as &code_eu003Code + &code_eu004Code, + &code_eu005Code, + &code_eu006Code, // toggle power, &code_eu140Code turns it off again + &code_eu007Code, + &code_eu008Code, + &code_na005Code, // same as &code_eu009Code + &code_na004Code, // same as &code_eu010Code + &code_eu011Code, + &code_eu012Code, + &code_eu013Code, + &code_na021Code, // same as &code_eu014Code + &code_eu015Code, + &code_eu016Code, + &code_eu017Code, + &code_eu018Code, + &code_eu019Code, + &code_eu020Code, + &code_eu021Code, + &code_eu022Code, + &code_na022Code, // same as &code_eu023Code + &code_eu024Code, + &code_eu025Code, + &code_eu026Code, + &code_eu140Code, // counters &code_eu006Code (toggle), so out of order + &code_eu027Code, + &code_eu028Code, + &code_eu029Code, + &code_eu030Code, + &code_eu031Code, + &code_eu032Code, + &code_eu033Code, + &code_eu034Code, + //&code_eu035Code, same as eu009 + &code_eu036Code, + &code_eu037Code, + &code_eu038Code, + &code_eu039Code, + &code_eu040Code, + &code_eu041Code, + &code_eu042Code, + &code_eu043Code, + &code_eu044Code, + &code_eu045Code, + &code_eu046Code, + &code_eu047Code, + &code_eu048Code, + &code_eu049Code, + &code_eu050Code, + &code_eu051Code, + &code_eu052Code, + &code_eu053Code, + &code_eu054Code, + &code_eu055Code, + &code_eu056Code, + //&code_eu057Code, same as eu008 + &code_eu058Code, + &code_eu059Code, + &code_eu060Code, + &code_eu061Code, + &code_eu062Code, + &code_eu063Code, + &code_eu064Code, + &code_eu065Code, + &code_eu066Code, + &code_eu067Code, + &code_eu068Code, + &code_eu069Code, + &code_eu070Code, + &code_eu071Code, + &code_eu072Code, + &code_eu073Code, + &code_eu074Code, + &code_eu075Code, + &code_eu076Code, + &code_eu077Code, + &code_eu078Code, + &code_eu079Code, + &code_eu080Code, + &code_eu081Code, + &code_eu082Code, + &code_eu083Code, + &code_eu084Code, + &code_eu085Code, + &code_eu086Code, + &code_eu087Code, + &code_eu088Code, + &code_eu089Code, + &code_eu090Code, + &code_eu091Code, + &code_eu092Code, + &code_eu093Code, + &code_eu094Code, + &code_eu095Code, + &code_eu096Code, + &code_eu097Code, + &code_eu098Code, + &code_eu099Code, + &code_eu100Code, + &code_eu101Code, + &code_eu102Code, + &code_eu103Code, + &code_eu104Code, + &code_eu105Code, + &code_eu106Code, + &code_eu107Code, + &code_eu108Code, + &code_eu109Code, + &code_eu110Code, + &code_eu111Code, + &code_eu112Code, + &code_eu113Code, + &code_eu114Code, + &code_eu115Code, + &code_eu116Code, + &code_eu117Code, + &code_eu118Code, + &code_eu119Code, + &code_eu120Code, + &code_eu121Code, + &code_eu122Code, + &code_eu123Code, + &code_eu124Code, + &code_eu125Code, + &code_eu126Code, + &code_eu127Code, + &code_eu128Code, + &code_eu129Code, + &code_eu130Code, + &code_eu131Code, + &code_eu132Code, + &code_eu133Code, + &code_eu134Code, + &code_eu135Code, + &code_eu136Code, + &code_eu137Code, + &code_eu138Code, + &code_eu139Code, +}; + +uint8_t num_NAcodes = NUM_ELEM(NApowerCodes); +uint8_t num_EUcodes = NUM_ELEM(EUpowerCodes); diff --git a/debug.cfg b/debug.cfg new file mode 100644 index 0000000..aa99b3e --- /dev/null +++ b/debug.cfg @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Example OpenOCD configuration file for ESP32-WROVER-KIT board. +# +# For example, OpenOCD can be started for ESP32 debugging on +# +# openocd -f board/esp32-wrover-kit-3.3v.cfg +# + +# Source the JTAG interface configuration file +source [find interface/ftdi/esp32_devkitj_v1.cfg] +set ESP32_FLASH_VOLTAGE 3.3 +# Source the ESP32 configuration file +source [find target/esp32.cfg] diff --git a/debug_custom.json b/debug_custom.json new file mode 100644 index 0000000..b890268 --- /dev/null +++ b/debug_custom.json @@ -0,0 +1,19 @@ +{ + "name":"Arduino on ESP32", + "toolchainPrefix":"xtensa-esp32-elf", + "svdFile":"esp32.svd", + "request":"attach", + "postAttachCommands":[ + "set remote hardware-watchpoint-limit 2", + "monitor reset halt", + "monitor gdb_sync", + "thb setup", + "c" + ], + "overrideRestartCommands":[ + "monitor reset halt", + "monitor gdb_sync", + "thb setup", + "c" + ] +} \ No newline at end of file diff --git a/esp32.svd b/esp32.svd new file mode 100644 index 0000000..783023f --- /dev/null +++ b/esp32.svd @@ -0,0 +1,46087 @@ + + + ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD. + ESPRESSIF + ESP32 + ESP32 + 8 + 32-bit MCU & 2.4 GHz Wi-Fi & Bluetooth/Bluetooth LE + + Copyright 2022 Espressif Systems (Shanghai) PTE LTD + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + + Xtensa LX6 + r0p0 + little + false + true + 3 + false + + 32 + 32 + 0x00000000 + 0xFFFFFFFF + + + AES + AES (Advanced Encryption Standard) Accelerator + AES + 0x3FF01000 + + 0x0 + 0x40 + registers + + + + START + 0x0 + 0x20 + + + START + Write 1 to start the AES operation. + 0 + 1 + write-only + + + + + IDLE + 0x4 + 0x20 + + + IDLE + AES Idle register. Reads ’zero’ while the AES Accelerator is busy processing; reads ’one’ otherwise. + 0 + 1 + read-only + + + + + MODE + 0x8 + 0x20 + + + MODE + Selects the AES accelerator mode of operation. See Table 22-1 for details. + 0 + 8 + read-write + + + + + 8 + 0x4 + KEY_%s + 0x10 + 0x20 + + + KEY + AES key material register. + 0 + 8 + read-write + + + + + 4 + 0x4 + TEXT_%s + 0x30 + 0x20 + + + TEXT + Plaintext and ciphertext register. + 0 + 8 + read-write + + + + + ENDIAN + 0x40 + 0x20 + + + ENDIAN + Endianness selection register. See Table 22-2 for details. + 0 + 2 + read-write + + + + + + + APB_CTRL + Advanced Peripheral Bus Controller + APB_CTRL + 0x3FF66000 + + 0x0 + 0x44 + registers + + + + SYSCLK_CONF + 0x0 + 0x20 + 0x00002000 + + + PRE_DIV_CNT + 0 + 10 + read-write + + + CLK_320M_EN + 10 + 1 + read-write + + + CLK_EN + 11 + 1 + read-write + + + RST_TICK_CNT + 12 + 1 + read-write + + + QUICK_CLK_CHNG + 13 + 1 + read-write + + + + + XTAL_TICK_CONF + 0x4 + 0x20 + 0x00000027 + + + XTAL_TICK_NUM + 0 + 8 + read-write + + + + + PLL_TICK_CONF + 0x8 + 0x20 + 0x0000004F + + + PLL_TICK_NUM + 0 + 8 + read-write + + + + + CK8M_TICK_CONF + 0xC + 0x20 + 0x0000000B + + + CK8M_TICK_NUM + 0 + 8 + read-write + + + + + APB_SARADC_CTRL + 0x10 + 0x20 + 0x007F8240 + + + SARADC_START_FORCE + 0 + 1 + read-write + + + SARADC_START + 1 + 1 + read-write + + + SARADC_SAR2_MUX + 1: SAR ADC2 is controlled by DIG ADC2 CTRL 0: SAR ADC2 is controlled by PWDET CTRL + 2 + 1 + read-write + + + SARADC_WORK_MODE + 0: single mode 1: double mode 2: alternate mode + 3 + 2 + read-write + + + SARADC_SAR_SEL + 0: SAR1 1: SAR2 only work for single SAR mode + 5 + 1 + read-write + + + SARADC_SAR_CLK_GATED + 6 + 1 + read-write + + + SARADC_SAR_CLK_DIV + SAR clock divider + 7 + 8 + read-write + + + SARADC_SAR1_PATT_LEN + 0 ~ 15 means length 1 ~ 16 + 15 + 4 + read-write + + + SARADC_SAR2_PATT_LEN + 0 ~ 15 means length 1 ~ 16 + 19 + 4 + read-write + + + SARADC_SAR1_PATT_P_CLEAR + clear the pointer of pattern table for DIG ADC1 CTRL + 23 + 1 + read-write + + + SARADC_SAR2_PATT_P_CLEAR + clear the pointer of pattern table for DIG ADC2 CTRL + 24 + 1 + read-write + + + SARADC_DATA_SAR_SEL + 1: sar_sel will be coded by the MSB of the 16-bit output data in this case the resolution should not be larger than 11 bits. + 25 + 1 + read-write + + + SARADC_DATA_TO_I2S + 1: I2S input data is from SAR ADC (for DMA) 0: I2S input data is from GPIO matrix + 26 + 1 + read-write + + + + + APB_SARADC_CTRL2 + 0x14 + 0x20 + 0x000001FE + + + SARADC_MEAS_NUM_LIMIT + 0 + 1 + read-write + + + SARADC_MAX_MEAS_NUM + max conversion number + 1 + 8 + read-write + + + SARADC_SAR1_INV + 1: data to DIG ADC1 CTRL is inverted otherwise not + 9 + 1 + read-write + + + SARADC_SAR2_INV + 1: data to DIG ADC2 CTRL is inverted otherwise not + 10 + 1 + read-write + + + + + APB_SARADC_FSM + 0x18 + 0x20 + 0x0208FF08 + + + SARADC_RSTB_WAIT + 0 + 8 + read-write + + + SARADC_STANDBY_WAIT + 8 + 8 + read-write + + + SARADC_START_WAIT + 16 + 8 + read-write + + + SARADC_SAMPLE_CYCLE + sample cycles + 24 + 8 + read-write + + + + + APB_SARADC_SAR1_PATT_TAB1 + 0x1C + 0x20 + 0x0F0F0F0F + + + SARADC_SAR1_PATT_TAB1 + item 0 ~ 3 for pattern table 1 (each item one byte) + 0 + 32 + read-write + + + + + APB_SARADC_SAR1_PATT_TAB2 + 0x20 + 0x20 + 0x0F0F0F0F + + + SARADC_SAR1_PATT_TAB2 + Item 4 ~ 7 for pattern table 1 (each item one byte) + 0 + 32 + read-write + + + + + APB_SARADC_SAR1_PATT_TAB3 + 0x24 + 0x20 + 0x0F0F0F0F + + + SARADC_SAR1_PATT_TAB3 + Item 8 ~ 11 for pattern table 1 (each item one byte) + 0 + 32 + read-write + + + + + APB_SARADC_SAR1_PATT_TAB4 + 0x28 + 0x20 + 0x0F0F0F0F + + + SARADC_SAR1_PATT_TAB4 + Item 12 ~ 15 for pattern table 1 (each item one byte) + 0 + 32 + read-write + + + + + APB_SARADC_SAR2_PATT_TAB1 + 0x2C + 0x20 + 0x0F0F0F0F + + + SARADC_SAR2_PATT_TAB1 + item 0 ~ 3 for pattern table 2 (each item one byte) + 0 + 32 + read-write + + + + + APB_SARADC_SAR2_PATT_TAB2 + 0x30 + 0x20 + 0x0F0F0F0F + + + SARADC_SAR2_PATT_TAB2 + Item 4 ~ 7 for pattern table 2 (each item one byte) + 0 + 32 + read-write + + + + + APB_SARADC_SAR2_PATT_TAB3 + 0x34 + 0x20 + 0x0F0F0F0F + + + SARADC_SAR2_PATT_TAB3 + Item 8 ~ 11 for pattern table 2 (each item one byte) + 0 + 32 + read-write + + + + + APB_SARADC_SAR2_PATT_TAB4 + 0x38 + 0x20 + 0x0F0F0F0F + + + SARADC_SAR2_PATT_TAB4 + Item 12 ~ 15 for pattern table 2 (each item one byte) + 0 + 32 + read-write + + + + + APLL_TICK_CONF + 0x3C + 0x20 + 0x00000063 + + + APLL_TICK_NUM + 0 + 8 + read-write + + + + + DATE + 0x7C + 0x20 + 0x16042000 + + + DATE + 0 + 32 + read-write + + + + + + + BB + Peripheral BB + BB + 0x3FF5D000 + + 0x0 + 0x4 + registers + + + + BBPD_CTRL + Baseband control register + 0x54 + 0x20 + + + DC_EST_FORCE_PD + 0 + 1 + read-write + + + DC_EST_FORCE_PU + 1 + 1 + read-write + + + FFT_FORCE_PD + 2 + 1 + read-write + + + FFT_FORCE_PU + 3 + 1 + read-write + + + + + + + DPORT + Peripheral DPORT + DPORT + 0x3FF00000 + + 0x0 + 0x5C0 + registers + + + WIFI_MAC + 0 + + + WIFI_NMI + 1 + + + WIFI_BB + 2 + + + BT_MAC + 3 + + + BT_BB + 4 + + + BT_BB_NMI + 5 + + + RWBT + 6 + + + RWBLE + 7 + + + RWBT_NMI + 8 + + + RWBLE_NMI + 9 + + + + PRO_BOOT_REMAP_CTRL + 0x0 + 0x20 + + + PRO_BOOT_REMAP + 0 + 1 + read-write + + + + + APP_BOOT_REMAP_CTRL + 0x4 + 0x20 + + + APP_BOOT_REMAP + 0 + 1 + read-write + + + + + ACCESS_CHECK + 0x8 + 0x20 + + + PRO + 0 + 1 + read-only + + + APP + 8 + 1 + read-only + + + + + PRO_DPORT_APB_MASK0 + 0xC + 0x20 + + + PRODPORT_APB_MASK0 + 0 + 32 + read-write + + + + + PRO_DPORT_APB_MASK1 + 0x10 + 0x20 + + + PRODPORT_APB_MASK1 + 0 + 32 + read-write + + + + + APP_DPORT_APB_MASK0 + 0x14 + 0x20 + + + APPDPORT_APB_MASK0 + 0 + 32 + read-write + + + + + APP_DPORT_APB_MASK1 + 0x18 + 0x20 + + + APPDPORT_APB_MASK1 + 0 + 32 + read-write + + + + + PERI_CLK_EN + 0x1C + 0x20 + + + PERI_CLK_EN + 0 + 32 + read-write + + + + + PERI_RST_EN + 0x20 + 0x20 + + + PERI_RST_EN + 0 + 32 + read-write + + + + + WIFI_BB_CFG + 0x24 + 0x20 + + + WIFI_BB_CFG + 0 + 32 + read-write + + + + + WIFI_BB_CFG_2 + 0x28 + 0x20 + + + WIFI_BB_CFG_2 + 0 + 32 + read-write + + + + + APPCPU_CTRL_A + 0x2C + 0x20 + 0x00000001 + + + APPCPU_RESETTING + 0 + 1 + read-write + + + + + APPCPU_CTRL_B + 0x30 + 0x20 + + + APPCPU_CLKGATE_EN + 0 + 1 + read-write + + + + + APPCPU_CTRL_C + 0x34 + 0x20 + + + APPCPU_RUNSTALL + 0 + 1 + read-write + + + + + APPCPU_CTRL_D + 0x38 + 0x20 + + + APPCPU_BOOT_ADDR + 0 + 32 + read-write + + + + + CPU_PER_CONF + 0x3C + 0x20 + + + CPUPERIOD_SEL + 0 + 2 + read-write + + + LOWSPEED_CLK_SEL + 2 + 1 + read-write + + + FAST_CLK_RTC_SEL + 3 + 1 + read-write + + + + + PRO_CACHE_CTRL + 0x40 + 0x20 + 0x00000010 + + + PRO_CACHE_MODE + 2 + 1 + read-write + + + PRO_CACHE_ENABLE + 3 + 1 + read-write + + + PRO_CACHE_FLUSH_ENA + 4 + 1 + read-write + + + PRO_CACHE_FLUSH_DONE + 5 + 1 + read-only + + + PRO_CACHE_LOCK_0_EN + 6 + 1 + read-write + + + PRO_CACHE_LOCK_1_EN + 7 + 1 + read-write + + + PRO_CACHE_LOCK_2_EN + 8 + 1 + read-write + + + PRO_CACHE_LOCK_3_EN + 9 + 1 + read-write + + + PRO_SINGLE_IRAM_ENA + 10 + 1 + read-write + + + PRO_DRAM_SPLIT + 11 + 1 + read-write + + + PRO_AHB_SPI_REQ + 12 + 1 + read-only + + + PRO_SLAVE_REQ + 13 + 1 + read-only + + + AHB_SPI_REQ + 14 + 1 + read-only + + + SLAVE_REQ + 15 + 1 + read-only + + + PRO_DRAM_HL + 16 + 1 + read-write + + + + + PRO_CACHE_CTRL1 + 0x44 + 0x20 + 0x000008FF + + + PRO_CACHE_MASK_IRAM0 + 0 + 1 + read-write + + + PRO_CACHE_MASK_IRAM1 + 1 + 1 + read-write + + + PRO_CACHE_MASK_IROM0 + 2 + 1 + read-write + + + PRO_CACHE_MASK_DRAM1 + 3 + 1 + read-write + + + PRO_CACHE_MASK_DROM0 + 4 + 1 + read-write + + + PRO_CACHE_MASK_OPSDRAM + 5 + 1 + read-write + + + PRO_CMMU_SRAM_PAGE_MODE + 6 + 3 + read-write + + + PRO_CMMU_FLASH_PAGE_MODE + 9 + 2 + read-write + + + PRO_CMMU_FORCE_ON + 11 + 1 + read-write + + + PRO_CMMU_PD + 12 + 1 + read-write + + + PRO_CACHE_MMU_IA_CLR + 13 + 1 + read-write + + + + + PRO_CACHE_LOCK_0_ADDR + 0x48 + 0x20 + + + PRE + 0 + 14 + read-write + + + MIN + 14 + 4 + read-write + + + MAX + 18 + 4 + read-write + + + + + PRO_CACHE_LOCK_1_ADDR + 0x4C + 0x20 + + + PRE + 0 + 14 + read-write + + + MIN + 14 + 4 + read-write + + + MAX + 18 + 4 + read-write + + + + + PRO_CACHE_LOCK_2_ADDR + 0x50 + 0x20 + + + PRE + 0 + 14 + read-write + + + MIN + 14 + 4 + read-write + + + MAX + 18 + 4 + read-write + + + + + PRO_CACHE_LOCK_3_ADDR + 0x54 + 0x20 + + + PRE + 0 + 14 + read-write + + + MIN + 14 + 4 + read-write + + + MAX + 18 + 4 + read-write + + + + + APP_CACHE_CTRL + 0x58 + 0x20 + 0x00000010 + + + APP_CACHE_MODE + 2 + 1 + read-write + + + APP_CACHE_ENABLE + 3 + 1 + read-write + + + APP_CACHE_FLUSH_ENA + 4 + 1 + read-write + + + APP_CACHE_FLUSH_DONE + 5 + 1 + read-only + + + APP_CACHE_LOCK_0_EN + 6 + 1 + read-write + + + APP_CACHE_LOCK_1_EN + 7 + 1 + read-write + + + APP_CACHE_LOCK_2_EN + 8 + 1 + read-write + + + APP_CACHE_LOCK_3_EN + 9 + 1 + read-write + + + APP_SINGLE_IRAM_ENA + 10 + 1 + read-write + + + APP_DRAM_SPLIT + 11 + 1 + read-write + + + APP_AHB_SPI_REQ + 12 + 1 + read-only + + + APP_SLAVE_REQ + 13 + 1 + read-only + + + APP_DRAM_HL + 14 + 1 + read-write + + + + + APP_CACHE_CTRL1 + 0x5C + 0x20 + 0x000008FF + + + APP_CACHE_MASK_IRAM0 + 0 + 1 + read-write + + + APP_CACHE_MASK_IRAM1 + 1 + 1 + read-write + + + APP_CACHE_MASK_IROM0 + 2 + 1 + read-write + + + APP_CACHE_MASK_DRAM1 + 3 + 1 + read-write + + + APP_CACHE_MASK_DROM0 + 4 + 1 + read-write + + + APP_CACHE_MASK_OPSDRAM + 5 + 1 + read-write + + + APP_CMMU_SRAM_PAGE_MODE + 6 + 3 + read-write + + + APP_CMMU_FLASH_PAGE_MODE + 9 + 2 + read-write + + + APP_CMMU_FORCE_ON + 11 + 1 + read-write + + + APP_CMMU_PD + 12 + 1 + read-write + + + APP_CACHE_MMU_IA_CLR + 13 + 1 + read-write + + + + + APP_CACHE_LOCK_0_ADDR + 0x60 + 0x20 + + + PRE + 0 + 14 + read-write + + + MIN + 14 + 4 + read-write + + + MAX + 18 + 4 + read-write + + + + + APP_CACHE_LOCK_1_ADDR + 0x64 + 0x20 + + + PRE + 0 + 14 + read-write + + + MIN + 14 + 4 + read-write + + + MAX + 18 + 4 + read-write + + + + + APP_CACHE_LOCK_2_ADDR + 0x68 + 0x20 + + + PRE + 0 + 14 + read-write + + + MIN + 14 + 4 + read-write + + + MAX + 18 + 4 + read-write + + + + + APP_CACHE_LOCK_3_ADDR + 0x6C + 0x20 + + + PRE + 0 + 14 + read-write + + + MIN + 14 + 4 + read-write + + + MAX + 18 + 4 + read-write + + + + + TRACEMEM_MUX_MODE + 0x70 + 0x20 + + + TRACEMEM_MUX_MODE + 0 + 2 + read-write + + + + + PRO_TRACEMEM_ENA + 0x74 + 0x20 + + + PRO_TRACEMEM_ENA + 0 + 1 + read-write + + + + + APP_TRACEMEM_ENA + 0x78 + 0x20 + + + APP_TRACEMEM_ENA + 0 + 1 + read-write + + + + + CACHE_MUX_MODE + 0x7C + 0x20 + + + CACHE_MUX_MODE + 0 + 2 + read-write + + + + + IMMU_PAGE_MODE + 0x80 + 0x20 + + + INTERNAL_SRAM_IMMU_ENA + 0 + 1 + read-write + + + IMMU_PAGE_MODE + 1 + 2 + read-write + + + + + DMMU_PAGE_MODE + 0x84 + 0x20 + + + INTERNAL_SRAM_DMMU_ENA + 0 + 1 + read-write + + + DMMU_PAGE_MODE + 1 + 2 + read-write + + + + + ROM_MPU_ENA + 0x88 + 0x20 + + + SHARE_ROM_MPU_ENA + 0 + 1 + read-write + + + PRO_ROM_MPU_ENA + 1 + 1 + read-write + + + APP_ROM_MPU_ENA + 2 + 1 + read-write + + + + + MEM_PD_MASK + 0x8C + 0x20 + 0x00000001 + + + LSLP_MEM_PD_MASK + 0 + 1 + read-write + + + + + ROM_PD_CTRL + 0x90 + 0x20 + + + PRO_ROM_PD + 0 + 1 + read-write + + + APP_ROM_PD + 1 + 1 + read-write + + + SHARE_ROM_PD + 2 + 6 + read-write + + + + + ROM_FO_CTRL + 0x94 + 0x20 + 0x00000003 + + + PRO_ROM_FO + 0 + 1 + read-write + + + APP_ROM_FO + 1 + 1 + read-write + + + SHARE_ROM_FO + 2 + 6 + read-write + + + + + SRAM_PD_CTRL_0 + 0x98 + 0x20 + + + SRAM_PD_0 + 0 + 32 + read-write + + + + + SRAM_PD_CTRL_1 + 0x9C + 0x20 + + + SRAM_PD_1 + 0 + 1 + read-write + + + + + SRAM_FO_CTRL_0 + 0xA0 + 0x20 + 0xFFFFFFFF + + + SRAM_FO_0 + 0 + 32 + read-write + + + + + SRAM_FO_CTRL_1 + 0xA4 + 0x20 + 0x00000001 + + + SRAM_FO_1 + 0 + 1 + read-write + + + + + IRAM_DRAM_AHB_SEL + 0xA8 + 0x20 + + + MASK_PRO_IRAM + 0 + 1 + read-write + + + MASK_APP_IRAM + 1 + 1 + read-write + + + MASK_PRO_DRAM + 2 + 1 + read-write + + + MASK_APP_DRAM + 3 + 1 + read-write + + + MASK_AHB + 4 + 1 + read-write + + + MAC_DUMP_MODE + 5 + 2 + read-write + + + + + TAG_FO_CTRL + 0xAC + 0x20 + 0x00000101 + + + PRO_CACHE_TAG_FORCE_ON + 0 + 1 + read-write + + + PRO_CACHE_TAG_PD + 1 + 1 + read-write + + + APP_CACHE_TAG_FORCE_ON + 8 + 1 + read-write + + + APP_CACHE_TAG_PD + 9 + 1 + read-write + + + + + AHB_LITE_MASK + 0xB0 + 0x20 + + + PRO + 0 + 1 + read-write + + + APP + 4 + 1 + read-write + + + SDIO + 8 + 1 + read-write + + + PRODPORT + 9 + 1 + read-write + + + APPDPORT + 10 + 1 + read-write + + + AHB_LITE_SDHOST_PID + 11 + 3 + read-write + + + + + AHB_MPU_TABLE_0 + 0xB4 + 0x20 + 0xFFFFFFFF + + + AHB_ACCESS_GRANT_0 + 0 + 32 + read-write + + + + + AHB_MPU_TABLE_1 + 0xB8 + 0x20 + 0x000001FF + + + AHB_ACCESS_GRANT_1 + 0 + 9 + read-write + + + + + HOST_INF_SEL + 0xBC + 0x20 + + + PERI_IO_SWAP + 0 + 8 + read-write + + + LINK_DEVICE_SEL + 8 + 8 + read-write + + + + + PERIP_CLK_EN + 0xC0 + 0x20 + 0xF9C1E06F + + + TIMERS_CLK_EN + 0 + 1 + read-write + + + SPI01_CLK_EN + 1 + 1 + read-write + + + UART_CLK_EN + 2 + 1 + read-write + + + WDG_CLK_EN + 3 + 1 + read-write + + + I2S0_CLK_EN + 4 + 1 + read-write + + + UART1_CLK_EN + 5 + 1 + read-write + + + SPI2_CLK_EN + 6 + 1 + read-write + + + I2C0_EXT0_CLK_EN + 7 + 1 + read-write + + + UHCI0_CLK_EN + 8 + 1 + read-write + + + RMT_CLK_EN + 9 + 1 + read-write + + + PCNT_CLK_EN + 10 + 1 + read-write + + + LEDC_CLK_EN + 11 + 1 + read-write + + + UHCI1_CLK_EN + 12 + 1 + read-write + + + TIMERGROUP_CLK_EN + 13 + 1 + read-write + + + EFUSE_CLK_EN + 14 + 1 + read-write + + + TIMERGROUP1_CLK_EN + 15 + 1 + read-write + + + SPI3_CLK_EN + 16 + 1 + read-write + + + PWM0_CLK_EN + 17 + 1 + read-write + + + I2C_EXT1_CLK_EN + 18 + 1 + read-write + + + TWAI_CLK_EN + 19 + 1 + read-write + + + PWM1_CLK_EN + 20 + 1 + read-write + + + I2S1_CLK_EN + 21 + 1 + read-write + + + SPI_DMA_CLK_EN + 22 + 1 + read-write + + + UART2_CLK_EN + 23 + 1 + read-write + + + UART_MEM_CLK_EN + 24 + 1 + read-write + + + PWM2_CLK_EN + 25 + 1 + read-write + + + PWM3_CLK_EN + 26 + 1 + read-write + + + + + PERIP_RST_EN + 0xC4 + 0x20 + + + TIMERS_RST + 0 + 1 + read-write + + + SPI01_RST + 1 + 1 + read-write + + + UART_RST + 2 + 1 + read-write + + + WDG_RST + 3 + 1 + read-write + + + I2S0_RST + 4 + 1 + read-write + + + UART1_RST + 5 + 1 + read-write + + + SPI2_RST + 6 + 1 + read-write + + + I2C0_EXT0_RST + 7 + 1 + read-write + + + UHCI0_RST + 8 + 1 + read-write + + + RMT_RST + 9 + 1 + read-write + + + PCNT_RST + 10 + 1 + read-write + + + LEDC_RST + 11 + 1 + read-write + + + UHCI1_RST + 12 + 1 + read-write + + + TIMERGROUP_RST + 13 + 1 + read-write + + + EFUSE_RST + 14 + 1 + read-write + + + TIMERGROUP1_RST + 15 + 1 + read-write + + + SPI3_RST + 16 + 1 + read-write + + + PWM0_RST + 17 + 1 + read-write + + + I2C_EXT1_RST + 18 + 1 + read-write + + + TWAI_RST + 19 + 1 + read-write + + + PWM1_RST + 20 + 1 + read-write + + + I2S1_RST + 21 + 1 + read-write + + + SPI_DMA_RST + 22 + 1 + read-write + + + UART2_RST + 23 + 1 + read-write + + + UART_MEM_RST + 24 + 1 + read-write + + + PWM2_RST + 25 + 1 + read-write + + + PWM3_RST + 26 + 1 + read-write + + + + + SLAVE_SPI_CONFIG + 0xC8 + 0x20 + + + SLAVE_SPI_MASK_PRO + 0 + 1 + read-write + + + SLAVE_SPI_MASK_APP + 4 + 1 + read-write + + + SPI_ENCRYPT_ENABLE + 8 + 1 + read-write + + + SPI_DECRYPT_ENABLE + 12 + 1 + read-write + + + + + WIFI_CLK_EN + 0xCC + 0x20 + 0xFFFCE030 + + + WIFI_CLK_EN + 0 + 32 + read-write + + + WIFI_CLK_WIFI_EN + 0 + 3 + read-write + + + WIFI_CLK_WIFI_BT_COMMON + 0 + 6 + read-write + + + WIFI_CLK_BT_EN + 11 + 3 + read-write + + + + + CORE_RST_EN + 0xD0 + 0x20 + + + CORE_RST + 0 + 8 + read-write + + + BB_RST + 0 + 1 + read-write + + + FE_RST + 1 + 1 + read-write + + + MAC_RST + 2 + 1 + read-write + + + BT_RST + 3 + 1 + read-write + + + BTMAC_RST + 4 + 1 + read-write + + + SDIO_RST + 5 + 1 + read-write + + + SDIO_HOST_RST + 6 + 1 + read-write + + + EMAC_RST + 7 + 1 + read-write + + + MACPWR_RST + 8 + 1 + read-write + + + RW_BTMAC_RST + 9 + 1 + read-write + + + RW_BTLP_RST + 10 + 1 + read-write + + + + + BT_LPCK_DIV_INT + 0xD4 + 0x20 + 0x000000FF + + + BT_LPCK_DIV_NUM + 0 + 12 + read-write + + + BTEXTWAKEUP_REQ + 12 + 1 + read-write + + + + + BT_LPCK_DIV_FRAC + 0xD8 + 0x20 + 0x02001001 + + + BT_LPCK_DIV_B + 0 + 12 + read-write + + + BT_LPCK_DIV_A + 12 + 12 + read-write + + + LPCLK_SEL_RTC_SLOW + 24 + 1 + read-write + + + LPCLK_SEL_8M + 25 + 1 + read-write + + + LPCLK_SEL_XTAL + 26 + 1 + read-write + + + LPCLK_SEL_XTAL32K + 27 + 1 + read-write + + + + + CPU_INTR_FROM_CPU_0 + 0xDC + 0x20 + + + CPU_INTR_FROM_CPU_0 + 0 + 1 + read-write + + + + + CPU_INTR_FROM_CPU_1 + 0xE0 + 0x20 + + + CPU_INTR_FROM_CPU_1 + 0 + 1 + read-write + + + + + CPU_INTR_FROM_CPU_2 + 0xE4 + 0x20 + + + CPU_INTR_FROM_CPU_2 + 0 + 1 + read-write + + + + + CPU_INTR_FROM_CPU_3 + 0xE8 + 0x20 + + + CPU_INTR_FROM_CPU_3 + 0 + 1 + read-write + + + + + PRO_INTR_STATUS_0 + 0xEC + 0x20 + + + PRO_INTR_STATUS_0 + 0 + 32 + read-only + + + + + PRO_INTR_STATUS_1 + 0xF0 + 0x20 + + + PRO_INTR_STATUS_1 + 0 + 32 + read-only + + + + + PRO_INTR_STATUS_2 + 0xF4 + 0x20 + + + PRO_INTR_STATUS_2 + 0 + 32 + read-only + + + + + APP_INTR_STATUS_0 + 0xF8 + 0x20 + + + APP_INTR_STATUS_0 + 0 + 32 + read-only + + + + + APP_INTR_STATUS_1 + 0xFC + 0x20 + + + APP_INTR_STATUS_1 + 0 + 32 + read-only + + + + + APP_INTR_STATUS_2 + 0x100 + 0x20 + + + APP_INTR_STATUS_2 + 0 + 32 + read-only + + + + + PRO_MAC_INTR_MAP + 0x104 + 0x20 + 0x00000010 + + + PRO_MAC_INTR_MAP + 0 + 5 + read-write + + + + + PRO_MAC_NMI_MAP + 0x108 + 0x20 + 0x00000010 + + + PRO_MAC_NMI_MAP + 0 + 5 + read-write + + + + + PRO_BB_INT_MAP + 0x10C + 0x20 + 0x00000010 + + + PRO_BB_INT_MAP + 0 + 5 + read-write + + + + + PRO_BT_MAC_INT_MAP + 0x110 + 0x20 + 0x00000010 + + + PRO_BT_MAC_INT_MAP + 0 + 5 + read-write + + + + + PRO_BT_BB_INT_MAP + 0x114 + 0x20 + 0x00000010 + + + PRO_BT_BB_INT_MAP + 0 + 5 + read-write + + + + + PRO_BT_BB_NMI_MAP + 0x118 + 0x20 + 0x00000010 + + + PRO_BT_BB_NMI_MAP + 0 + 5 + read-write + + + + + PRO_RWBT_IRQ_MAP + 0x11C + 0x20 + 0x00000010 + + + PRO_RWBT_IRQ_MAP + 0 + 5 + read-write + + + + + PRO_RWBLE_IRQ_MAP + 0x120 + 0x20 + 0x00000010 + + + PRO_RWBLE_IRQ_MAP + 0 + 5 + read-write + + + + + PRO_RWBT_NMI_MAP + 0x124 + 0x20 + 0x00000010 + + + PRO_RWBT_NMI_MAP + 0 + 5 + read-write + + + + + PRO_RWBLE_NMI_MAP + 0x128 + 0x20 + 0x00000010 + + + PRO_RWBLE_NMI_MAP + 0 + 5 + read-write + + + + + PRO_SLC0_INTR_MAP + 0x12C + 0x20 + 0x00000010 + + + PRO_SLC0_INTR_MAP + 0 + 5 + read-write + + + + + PRO_SLC1_INTR_MAP + 0x130 + 0x20 + 0x00000010 + + + PRO_SLC1_INTR_MAP + 0 + 5 + read-write + + + + + PRO_UHCI0_INTR_MAP + 0x134 + 0x20 + 0x00000010 + + + PRO_UHCI0_INTR_MAP + 0 + 5 + read-write + + + + + PRO_UHCI1_INTR_MAP + 0x138 + 0x20 + 0x00000010 + + + PRO_UHCI1_INTR_MAP + 0 + 5 + read-write + + + + + PRO_TG_T0_LEVEL_INT_MAP + 0x13C + 0x20 + 0x00000010 + + + PRO_TG_T0_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG_T1_LEVEL_INT_MAP + 0x140 + 0x20 + 0x00000010 + + + PRO_TG_T1_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG_WDT_LEVEL_INT_MAP + 0x144 + 0x20 + 0x00000010 + + + PRO_TG_WDT_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG_LACT_LEVEL_INT_MAP + 0x148 + 0x20 + 0x00000010 + + + PRO_TG_LACT_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG1_T0_LEVEL_INT_MAP + 0x14C + 0x20 + 0x00000010 + + + PRO_TG1_T0_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG1_T1_LEVEL_INT_MAP + 0x150 + 0x20 + 0x00000010 + + + PRO_TG1_T1_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG1_WDT_LEVEL_INT_MAP + 0x154 + 0x20 + 0x00000010 + + + PRO_TG1_WDT_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG1_LACT_LEVEL_INT_MAP + 0x158 + 0x20 + 0x00000010 + + + PRO_TG1_LACT_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + PRO_GPIO_INTERRUPT_MAP + 0x15C + 0x20 + 0x00000010 + + + PRO_GPIO_INTERRUPT_PRO_MAP + 0 + 5 + read-write + + + + + PRO_GPIO_INTERRUPT_NMI_MAP + 0x160 + 0x20 + 0x00000010 + + + PRO_GPIO_INTERRUPT_PRO_NMI_MAP + 0 + 5 + read-write + + + + + PRO_CPU_INTR_FROM_CPU_0_MAP + 0x164 + 0x20 + 0x00000010 + + + PRO_CPU_INTR_FROM_CPU_0_MAP + 0 + 5 + read-write + + + + + PRO_CPU_INTR_FROM_CPU_1_MAP + 0x168 + 0x20 + 0x00000010 + + + PRO_CPU_INTR_FROM_CPU_1_MAP + 0 + 5 + read-write + + + + + PRO_CPU_INTR_FROM_CPU_2_MAP + 0x16C + 0x20 + 0x00000010 + + + PRO_CPU_INTR_FROM_CPU_2_MAP + 0 + 5 + read-write + + + + + PRO_CPU_INTR_FROM_CPU_3_MAP + 0x170 + 0x20 + 0x00000010 + + + PRO_CPU_INTR_FROM_CPU_3_MAP + 0 + 5 + read-write + + + + + PRO_SPI_INTR_0_MAP + 0x174 + 0x20 + 0x00000010 + + + PRO_SPI_INTR_0_MAP + 0 + 5 + read-write + + + + + PRO_SPI_INTR_1_MAP + 0x178 + 0x20 + 0x00000010 + + + PRO_SPI_INTR_1_MAP + 0 + 5 + read-write + + + + + PRO_SPI_INTR_2_MAP + 0x17C + 0x20 + 0x00000010 + + + PRO_SPI_INTR_2_MAP + 0 + 5 + read-write + + + + + PRO_SPI_INTR_3_MAP + 0x180 + 0x20 + 0x00000010 + + + PRO_SPI_INTR_3_MAP + 0 + 5 + read-write + + + + + PRO_I2S0_INT_MAP + 0x184 + 0x20 + 0x00000010 + + + PRO_I2S0_INT_MAP + 0 + 5 + read-write + + + + + PRO_I2S1_INT_MAP + 0x188 + 0x20 + 0x00000010 + + + PRO_I2S1_INT_MAP + 0 + 5 + read-write + + + + + PRO_UART_INTR_MAP + 0x18C + 0x20 + 0x00000010 + + + PRO_UART_INTR_MAP + 0 + 5 + read-write + + + + + PRO_UART1_INTR_MAP + 0x190 + 0x20 + 0x00000010 + + + PRO_UART1_INTR_MAP + 0 + 5 + read-write + + + + + PRO_UART2_INTR_MAP + 0x194 + 0x20 + 0x00000010 + + + PRO_UART2_INTR_MAP + 0 + 5 + read-write + + + + + PRO_SDIO_HOST_INTERRUPT_MAP + 0x198 + 0x20 + 0x00000010 + + + PRO_SDIO_HOST_INTERRUPT_MAP + 0 + 5 + read-write + + + + + PRO_EMAC_INT_MAP + 0x19C + 0x20 + 0x00000010 + + + PRO_EMAC_INT_MAP + 0 + 5 + read-write + + + + + PRO_PWM0_INTR_MAP + 0x1A0 + 0x20 + 0x00000010 + + + PRO_PWM0_INTR_MAP + 0 + 5 + read-write + + + + + PRO_PWM1_INTR_MAP + 0x1A4 + 0x20 + 0x00000010 + + + PRO_PWM1_INTR_MAP + 0 + 5 + read-write + + + + + PRO_PWM2_INTR_MAP + 0x1A8 + 0x20 + 0x00000010 + + + PRO_PWM2_INTR_MAP + 0 + 5 + read-write + + + + + PRO_PWM3_INTR_MAP + 0x1AC + 0x20 + 0x00000010 + + + PRO_PWM3_INTR_MAP + 0 + 5 + read-write + + + + + PRO_LEDC_INT_MAP + 0x1B0 + 0x20 + 0x00000010 + + + PRO_LEDC_INT_MAP + 0 + 5 + read-write + + + + + PRO_EFUSE_INT_MAP + 0x1B4 + 0x20 + 0x00000010 + + + PRO_EFUSE_INT_MAP + 0 + 5 + read-write + + + + + PRO_CAN_INT_MAP + 0x1B8 + 0x20 + 0x00000010 + + + PRO_CAN_INT_MAP + 0 + 5 + read-write + + + + + PRO_RTC_CORE_INTR_MAP + 0x1BC + 0x20 + 0x00000010 + + + PRO_RTC_CORE_INTR_MAP + 0 + 5 + read-write + + + + + PRO_RMT_INTR_MAP + 0x1C0 + 0x20 + 0x00000010 + + + PRO_RMT_INTR_MAP + 0 + 5 + read-write + + + + + PRO_PCNT_INTR_MAP + 0x1C4 + 0x20 + 0x00000010 + + + PRO_PCNT_INTR_MAP + 0 + 5 + read-write + + + + + PRO_I2C_EXT0_INTR_MAP + 0x1C8 + 0x20 + 0x00000010 + + + PRO_I2C_EXT0_INTR_MAP + 0 + 5 + read-write + + + + + PRO_I2C_EXT1_INTR_MAP + 0x1CC + 0x20 + 0x00000010 + + + PRO_I2C_EXT1_INTR_MAP + 0 + 5 + read-write + + + + + PRO_RSA_INTR_MAP + 0x1D0 + 0x20 + 0x00000010 + + + PRO_RSA_INTR_MAP + 0 + 5 + read-write + + + + + PRO_SPI1_DMA_INT_MAP + 0x1D4 + 0x20 + 0x00000010 + + + PRO_SPI1_DMA_INT_MAP + 0 + 5 + read-write + + + + + PRO_SPI2_DMA_INT_MAP + 0x1D8 + 0x20 + 0x00000010 + + + PRO_SPI2_DMA_INT_MAP + 0 + 5 + read-write + + + + + PRO_SPI3_DMA_INT_MAP + 0x1DC + 0x20 + 0x00000010 + + + PRO_SPI3_DMA_INT_MAP + 0 + 5 + read-write + + + + + PRO_WDG_INT_MAP + 0x1E0 + 0x20 + 0x00000010 + + + PRO_WDG_INT_MAP + 0 + 5 + read-write + + + + + PRO_TIMER_INT1_MAP + 0x1E4 + 0x20 + 0x00000010 + + + PRO_TIMER_INT1_MAP + 0 + 5 + read-write + + + + + PRO_TIMER_INT2_MAP + 0x1E8 + 0x20 + 0x00000010 + + + PRO_TIMER_INT2_MAP + 0 + 5 + read-write + + + + + PRO_TG_T0_EDGE_INT_MAP + 0x1EC + 0x20 + 0x00000010 + + + PRO_TG_T0_EDGE_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG_T1_EDGE_INT_MAP + 0x1F0 + 0x20 + 0x00000010 + + + PRO_TG_T1_EDGE_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG_WDT_EDGE_INT_MAP + 0x1F4 + 0x20 + 0x00000010 + + + PRO_TG_WDT_EDGE_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG_LACT_EDGE_INT_MAP + 0x1F8 + 0x20 + 0x00000010 + + + PRO_TG_LACT_EDGE_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG1_T0_EDGE_INT_MAP + 0x1FC + 0x20 + 0x00000010 + + + PRO_TG1_T0_EDGE_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG1_T1_EDGE_INT_MAP + 0x200 + 0x20 + 0x00000010 + + + PRO_TG1_T1_EDGE_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG1_WDT_EDGE_INT_MAP + 0x204 + 0x20 + 0x00000010 + + + PRO_TG1_WDT_EDGE_INT_MAP + 0 + 5 + read-write + + + + + PRO_TG1_LACT_EDGE_INT_MAP + 0x208 + 0x20 + 0x00000010 + + + PRO_TG1_LACT_EDGE_INT_MAP + 0 + 5 + read-write + + + + + PRO_MMU_IA_INT_MAP + 0x20C + 0x20 + 0x00000010 + + + PRO_MMU_IA_INT_MAP + 0 + 5 + read-write + + + + + PRO_MPU_IA_INT_MAP + 0x210 + 0x20 + 0x00000010 + + + PRO_MPU_IA_INT_MAP + 0 + 5 + read-write + + + + + PRO_CACHE_IA_INT_MAP + 0x214 + 0x20 + 0x00000010 + + + PRO_CACHE_IA_INT_MAP + 0 + 5 + read-write + + + + + APP_MAC_INTR_MAP + 0x218 + 0x20 + 0x00000010 + + + APP_MAC_INTR_MAP + 0 + 5 + read-write + + + + + APP_MAC_NMI_MAP + 0x21C + 0x20 + 0x00000010 + + + APP_MAC_NMI_MAP + 0 + 5 + read-write + + + + + APP_BB_INT_MAP + 0x220 + 0x20 + 0x00000010 + + + APP_BB_INT_MAP + 0 + 5 + read-write + + + + + APP_BT_MAC_INT_MAP + 0x224 + 0x20 + 0x00000010 + + + APP_BT_MAC_INT_MAP + 0 + 5 + read-write + + + + + APP_BT_BB_INT_MAP + 0x228 + 0x20 + 0x00000010 + + + APP_BT_BB_INT_MAP + 0 + 5 + read-write + + + + + APP_BT_BB_NMI_MAP + 0x22C + 0x20 + 0x00000010 + + + APP_BT_BB_NMI_MAP + 0 + 5 + read-write + + + + + APP_RWBT_IRQ_MAP + 0x230 + 0x20 + 0x00000010 + + + APP_RWBT_IRQ_MAP + 0 + 5 + read-write + + + + + APP_RWBLE_IRQ_MAP + 0x234 + 0x20 + 0x00000010 + + + APP_RWBLE_IRQ_MAP + 0 + 5 + read-write + + + + + APP_RWBT_NMI_MAP + 0x238 + 0x20 + 0x00000010 + + + APP_RWBT_NMI_MAP + 0 + 5 + read-write + + + + + APP_RWBLE_NMI_MAP + 0x23C + 0x20 + 0x00000010 + + + APP_RWBLE_NMI_MAP + 0 + 5 + read-write + + + + + APP_SLC0_INTR_MAP + 0x240 + 0x20 + 0x00000010 + + + APP_SLC0_INTR_MAP + 0 + 5 + read-write + + + + + APP_SLC1_INTR_MAP + 0x244 + 0x20 + 0x00000010 + + + APP_SLC1_INTR_MAP + 0 + 5 + read-write + + + + + APP_UHCI0_INTR_MAP + 0x248 + 0x20 + 0x00000010 + + + APP_UHCI0_INTR_MAP + 0 + 5 + read-write + + + + + APP_UHCI1_INTR_MAP + 0x24C + 0x20 + 0x00000010 + + + APP_UHCI1_INTR_MAP + 0 + 5 + read-write + + + + + APP_TG_T0_LEVEL_INT_MAP + 0x250 + 0x20 + 0x00000010 + + + APP_TG_T0_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + APP_TG_T1_LEVEL_INT_MAP + 0x254 + 0x20 + 0x00000010 + + + APP_TG_T1_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + APP_TG_WDT_LEVEL_INT_MAP + 0x258 + 0x20 + 0x00000010 + + + APP_TG_WDT_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + APP_TG_LACT_LEVEL_INT_MAP + 0x25C + 0x20 + 0x00000010 + + + APP_TG_LACT_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + APP_TG1_T0_LEVEL_INT_MAP + 0x260 + 0x20 + 0x00000010 + + + APP_TG1_T0_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + APP_TG1_T1_LEVEL_INT_MAP + 0x264 + 0x20 + 0x00000010 + + + APP_TG1_T1_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + APP_TG1_WDT_LEVEL_INT_MAP + 0x268 + 0x20 + 0x00000010 + + + APP_TG1_WDT_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + APP_TG1_LACT_LEVEL_INT_MAP + 0x26C + 0x20 + 0x00000010 + + + APP_TG1_LACT_LEVEL_INT_MAP + 0 + 5 + read-write + + + + + APP_GPIO_INTERRUPT_MAP + 0x270 + 0x20 + 0x00000010 + + + APP_GPIO_INTERRUPT_APP_MAP + 0 + 5 + read-write + + + + + APP_GPIO_INTERRUPT_NMI_MAP + 0x274 + 0x20 + 0x00000010 + + + APP_GPIO_INTERRUPT_APP_NMI_MAP + 0 + 5 + read-write + + + + + APP_CPU_INTR_FROM_CPU_0_MAP + 0x278 + 0x20 + 0x00000010 + + + APP_CPU_INTR_FROM_CPU_0_MAP + 0 + 5 + read-write + + + + + APP_CPU_INTR_FROM_CPU_1_MAP + 0x27C + 0x20 + 0x00000010 + + + APP_CPU_INTR_FROM_CPU_1_MAP + 0 + 5 + read-write + + + + + APP_CPU_INTR_FROM_CPU_2_MAP + 0x280 + 0x20 + 0x00000010 + + + APP_CPU_INTR_FROM_CPU_2_MAP + 0 + 5 + read-write + + + + + APP_CPU_INTR_FROM_CPU_3_MAP + 0x284 + 0x20 + 0x00000010 + + + APP_CPU_INTR_FROM_CPU_3_MAP + 0 + 5 + read-write + + + + + APP_SPI_INTR_0_MAP + 0x288 + 0x20 + 0x00000010 + + + APP_SPI_INTR_0_MAP + 0 + 5 + read-write + + + + + APP_SPI_INTR_1_MAP + 0x28C + 0x20 + 0x00000010 + + + APP_SPI_INTR_1_MAP + 0 + 5 + read-write + + + + + APP_SPI_INTR_2_MAP + 0x290 + 0x20 + 0x00000010 + + + APP_SPI_INTR_2_MAP + 0 + 5 + read-write + + + + + APP_SPI_INTR_3_MAP + 0x294 + 0x20 + 0x00000010 + + + APP_SPI_INTR_3_MAP + 0 + 5 + read-write + + + + + APP_I2S0_INT_MAP + 0x298 + 0x20 + 0x00000010 + + + APP_I2S0_INT_MAP + 0 + 5 + read-write + + + + + APP_I2S1_INT_MAP + 0x29C + 0x20 + 0x00000010 + + + APP_I2S1_INT_MAP + 0 + 5 + read-write + + + + + APP_UART_INTR_MAP + 0x2A0 + 0x20 + 0x00000010 + + + APP_UART_INTR_MAP + 0 + 5 + read-write + + + + + APP_UART1_INTR_MAP + 0x2A4 + 0x20 + 0x00000010 + + + APP_UART1_INTR_MAP + 0 + 5 + read-write + + + + + APP_UART2_INTR_MAP + 0x2A8 + 0x20 + 0x00000010 + + + APP_UART2_INTR_MAP + 0 + 5 + read-write + + + + + APP_SDIO_HOST_INTERRUPT_MAP + 0x2AC + 0x20 + 0x00000010 + + + APP_SDIO_HOST_INTERRUPT_MAP + 0 + 5 + read-write + + + + + APP_EMAC_INT_MAP + 0x2B0 + 0x20 + 0x00000010 + + + APP_EMAC_INT_MAP + 0 + 5 + read-write + + + + + APP_PWM0_INTR_MAP + 0x2B4 + 0x20 + 0x00000010 + + + APP_PWM0_INTR_MAP + 0 + 5 + read-write + + + + + APP_PWM1_INTR_MAP + 0x2B8 + 0x20 + 0x00000010 + + + APP_PWM1_INTR_MAP + 0 + 5 + read-write + + + + + APP_PWM2_INTR_MAP + 0x2BC + 0x20 + 0x00000010 + + + APP_PWM2_INTR_MAP + 0 + 5 + read-write + + + + + APP_PWM3_INTR_MAP + 0x2C0 + 0x20 + 0x00000010 + + + APP_PWM3_INTR_MAP + 0 + 5 + read-write + + + + + APP_LEDC_INT_MAP + 0x2C4 + 0x20 + 0x00000010 + + + APP_LEDC_INT_MAP + 0 + 5 + read-write + + + + + APP_EFUSE_INT_MAP + 0x2C8 + 0x20 + 0x00000010 + + + APP_EFUSE_INT_MAP + 0 + 5 + read-write + + + + + APP_CAN_INT_MAP + 0x2CC + 0x20 + 0x00000010 + + + APP_CAN_INT_MAP + 0 + 5 + read-write + + + + + APP_RTC_CORE_INTR_MAP + 0x2D0 + 0x20 + 0x00000010 + + + APP_RTC_CORE_INTR_MAP + 0 + 5 + read-write + + + + + APP_RMT_INTR_MAP + 0x2D4 + 0x20 + 0x00000010 + + + APP_RMT_INTR_MAP + 0 + 5 + read-write + + + + + APP_PCNT_INTR_MAP + 0x2D8 + 0x20 + 0x00000010 + + + APP_PCNT_INTR_MAP + 0 + 5 + read-write + + + + + APP_I2C_EXT0_INTR_MAP + 0x2DC + 0x20 + 0x00000010 + + + APP_I2C_EXT0_INTR_MAP + 0 + 5 + read-write + + + + + APP_I2C_EXT1_INTR_MAP + 0x2E0 + 0x20 + 0x00000010 + + + APP_I2C_EXT1_INTR_MAP + 0 + 5 + read-write + + + + + APP_RSA_INTR_MAP + 0x2E4 + 0x20 + 0x00000010 + + + APP_RSA_INTR_MAP + 0 + 5 + read-write + + + + + APP_SPI1_DMA_INT_MAP + 0x2E8 + 0x20 + 0x00000010 + + + APP_SPI1_DMA_INT_MAP + 0 + 5 + read-write + + + + + APP_SPI2_DMA_INT_MAP + 0x2EC + 0x20 + 0x00000010 + + + APP_SPI2_DMA_INT_MAP + 0 + 5 + read-write + + + + + APP_SPI3_DMA_INT_MAP + 0x2F0 + 0x20 + 0x00000010 + + + APP_SPI3_DMA_INT_MAP + 0 + 5 + read-write + + + + + APP_WDG_INT_MAP + 0x2F4 + 0x20 + 0x00000010 + + + APP_WDG_INT_MAP + 0 + 5 + read-write + + + + + APP_TIMER_INT1_MAP + 0x2F8 + 0x20 + 0x00000010 + + + APP_TIMER_INT1_MAP + 0 + 5 + read-write + + + + + APP_TIMER_INT2_MAP + 0x2FC + 0x20 + 0x00000010 + + + APP_TIMER_INT2_MAP + 0 + 5 + read-write + + + + + APP_TG_T0_EDGE_INT_MAP + 0x300 + 0x20 + 0x00000010 + + + APP_TG_T0_EDGE_INT_MAP + 0 + 5 + read-write + + + + + APP_TG_T1_EDGE_INT_MAP + 0x304 + 0x20 + 0x00000010 + + + APP_TG_T1_EDGE_INT_MAP + 0 + 5 + read-write + + + + + APP_TG_WDT_EDGE_INT_MAP + 0x308 + 0x20 + 0x00000010 + + + APP_TG_WDT_EDGE_INT_MAP + 0 + 5 + read-write + + + + + APP_TG_LACT_EDGE_INT_MAP + 0x30C + 0x20 + 0x00000010 + + + APP_TG_LACT_EDGE_INT_MAP + 0 + 5 + read-write + + + + + APP_TG1_T0_EDGE_INT_MAP + 0x310 + 0x20 + 0x00000010 + + + APP_TG1_T0_EDGE_INT_MAP + 0 + 5 + read-write + + + + + APP_TG1_T1_EDGE_INT_MAP + 0x314 + 0x20 + 0x00000010 + + + APP_TG1_T1_EDGE_INT_MAP + 0 + 5 + read-write + + + + + APP_TG1_WDT_EDGE_INT_MAP + 0x318 + 0x20 + 0x00000010 + + + APP_TG1_WDT_EDGE_INT_MAP + 0 + 5 + read-write + + + + + APP_TG1_LACT_EDGE_INT_MAP + 0x31C + 0x20 + 0x00000010 + + + APP_TG1_LACT_EDGE_INT_MAP + 0 + 5 + read-write + + + + + APP_MMU_IA_INT_MAP + 0x320 + 0x20 + 0x00000010 + + + APP_MMU_IA_INT_MAP + 0 + 5 + read-write + + + + + APP_MPU_IA_INT_MAP + 0x324 + 0x20 + 0x00000010 + + + APP_MPU_IA_INT_MAP + 0 + 5 + read-write + + + + + APP_CACHE_IA_INT_MAP + 0x328 + 0x20 + 0x00000010 + + + APP_CACHE_IA_INT_MAP + 0 + 5 + read-write + + + + + AHBLITE_MPU_TABLE_UART + 0x32C + 0x20 + + + UART_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_SPI1 + 0x330 + 0x20 + + + SPI1_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_SPI0 + 0x334 + 0x20 + + + SPI0_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_GPIO + 0x338 + 0x20 + + + GPIO_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_FE2 + 0x33C + 0x20 + + + FE2_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_FE + 0x340 + 0x20 + + + FE_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_TIMER + 0x344 + 0x20 + + + TIMER_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_RTC + 0x348 + 0x20 + + + RTC_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_IO_MUX + 0x34C + 0x20 + + + IOMUX_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_WDG + 0x350 + 0x20 + + + WDG_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_HINF + 0x354 + 0x20 + + + HINF_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_UHCI1 + 0x358 + 0x20 + + + UHCI1_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_MISC + 0x35C + 0x20 + + + MISC_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_I2C + 0x360 + 0x20 + + + I2C_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_I2S0 + 0x364 + 0x20 + + + I2S0_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_UART1 + 0x368 + 0x20 + + + UART1_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_BT + 0x36C + 0x20 + + + BT_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_BT_BUFFER + 0x370 + 0x20 + + + BTBUFFER_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_I2C_EXT0 + 0x374 + 0x20 + + + I2CEXT0_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_UHCI0 + 0x378 + 0x20 + + + UHCI0_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_SLCHOST + 0x37C + 0x20 + + + SLCHOST_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_RMT + 0x380 + 0x20 + + + RMT_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_PCNT + 0x384 + 0x20 + + + PCNT_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_SLC + 0x388 + 0x20 + + + SLC_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_LEDC + 0x38C + 0x20 + + + LEDC_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_EFUSE + 0x390 + 0x20 + + + EFUSE_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_SPI_ENCRYPT + 0x394 + 0x20 + + + SPI_ENCRYPY_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_BB + 0x398 + 0x20 + + + BB_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_PWM0 + 0x39C + 0x20 + + + PWM0_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_TIMERGROUP + 0x3A0 + 0x20 + + + TIMERGROUP_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_TIMERGROUP1 + 0x3A4 + 0x20 + + + TIMERGROUP1_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_SPI2 + 0x3A8 + 0x20 + + + SPI2_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_SPI3 + 0x3AC + 0x20 + + + SPI3_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_APB_CTRL + 0x3B0 + 0x20 + + + APBCTRL_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_I2C_EXT1 + 0x3B4 + 0x20 + + + I2CEXT1_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_SDIO_HOST + 0x3B8 + 0x20 + + + SDIOHOST_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_EMAC + 0x3BC + 0x20 + + + EMAC_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_CAN + 0x3C0 + 0x20 + + + CAN_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_PWM1 + 0x3C4 + 0x20 + + + PWM1_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_I2S1 + 0x3C8 + 0x20 + + + I2S1_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_UART2 + 0x3CC + 0x20 + + + UART2_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_PWM2 + 0x3D0 + 0x20 + + + PWM2_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_PWM3 + 0x3D4 + 0x20 + + + PWM3_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_RWBT + 0x3D8 + 0x20 + + + RWBT_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_BTMAC + 0x3DC + 0x20 + + + BTMAC_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_WIFIMAC + 0x3E0 + 0x20 + + + WIFIMAC_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + AHBLITE_MPU_TABLE_PWR + 0x3E4 + 0x20 + + + PWR_ACCESS_GRANT_CONFIG + 0 + 6 + read-write + + + + + MEM_ACCESS_DBUG0 + 0x3E8 + 0x20 + + + PRO_ROM_MPU_AD + 0 + 1 + read-only + + + PRO_ROM_IA + 1 + 1 + read-only + + + APP_ROM_MPU_AD + 2 + 1 + read-only + + + APP_ROM_IA + 3 + 1 + read-only + + + SHARE_ROM_MPU_AD + 4 + 2 + read-only + + + SHARE_ROM_IA + 6 + 4 + read-only + + + INTERNAL_SRAM_MMU_AD + 10 + 4 + read-only + + + INTERNAL_SRAM_IA + 14 + 12 + read-only + + + INTERNAL_SRAM_MMU_MULTI_HIT + 26 + 4 + read-only + + + + + MEM_ACCESS_DBUG1 + 0x3EC + 0x20 + + + INTERNAL_SRAM_MMU_MISS + 0 + 4 + read-only + + + ARB_IA + 4 + 2 + read-only + + + PIDGEN_IA + 6 + 2 + read-only + + + AHB_ACCESS_DENY + 8 + 1 + read-only + + + AHBLITE_ACCESS_DENY + 9 + 1 + read-only + + + AHBLITE_IA + 10 + 1 + read-only + + + + + PRO_DCACHE_DBUG0 + 0x3F0 + 0x20 + + + PRO_SLAVE_WDATA + 0 + 1 + read-write + + + PRO_CACHE_MMU_IA + 0 + 1 + read-only + + + PRO_CACHE_IA + 1 + 6 + read-only + + + PRO_CACHE_STATE + 7 + 12 + read-only + + + PRO_WR_BAK_TO_READ + 19 + 1 + read-only + + + PRO_TX_END + 20 + 1 + read-only + + + PRO_SLAVE_WR + 21 + 1 + read-only + + + PRO_SLAVE_WDATA_V + 22 + 1 + read-only + + + PRO_RX_END + 23 + 1 + read-only + + + + + PRO_DCACHE_DBUG1 + 0x3F4 + 0x20 + + + PRO_CTAG_RAM_RDATA + 0 + 32 + read-only + + + + + PRO_DCACHE_DBUG2 + 0x3F8 + 0x20 + + + PRO_CACHE_VADDR + 0 + 27 + read-only + + + + + PRO_DCACHE_DBUG3 + 0x3FC + 0x20 + + + PRO_MMU_RDATA + 0 + 9 + read-only + + + PRO_CPU_DISABLED_CACHE_IA + 9 + 6 + read-only + + + PRO_CPU_DISABLED_CACHE_IA_OPPOSITE + 9 + 1 + read-write + + + PRO_CPU_DISABLED_CACHE_IA_DRAM1 + 10 + 1 + read-write + + + PRO_CPU_DISABLED_CACHE_IA_IROM0 + 11 + 1 + read-write + + + PRO_CPU_DISABLED_CACHE_IA_IRAM1 + 12 + 1 + read-write + + + PRO_CPU_DISABLED_CACHE_IA_IRAM0 + 13 + 1 + read-write + + + PRO_CPU_DISABLED_CACHE_IA_DROM0 + 14 + 1 + read-write + + + PRO_CACHE_IRAM0_PID_ERROR + 15 + 1 + read-only + + + + + PRO_DCACHE_DBUG4 + 0x400 + 0x20 + + + PRO_DRAM1ADDR0_IA + 0 + 20 + read-only + + + + + PRO_DCACHE_DBUG5 + 0x404 + 0x20 + + + PRO_DROM0ADDR0_IA + 0 + 20 + read-only + + + + + PRO_DCACHE_DBUG6 + 0x408 + 0x20 + + + PRO_IRAM0ADDR_IA + 0 + 20 + read-only + + + + + PRO_DCACHE_DBUG7 + 0x40C + 0x20 + + + PRO_IRAM1ADDR_IA + 0 + 20 + read-only + + + + + PRO_DCACHE_DBUG8 + 0x410 + 0x20 + + + PRO_IROM0ADDR_IA + 0 + 20 + read-only + + + + + PRO_DCACHE_DBUG9 + 0x414 + 0x20 + + + PRO_OPSDRAMADDR_IA + 0 + 20 + read-only + + + + + APP_DCACHE_DBUG0 + 0x418 + 0x20 + + + APP_SLAVE_WDATA + 0 + 1 + read-write + + + APP_CACHE_MMU_IA + 0 + 1 + read-only + + + APP_CACHE_IA + 1 + 6 + read-only + + + APP_CACHE_STATE + 7 + 12 + read-only + + + APP_WR_BAK_TO_READ + 19 + 1 + read-only + + + APP_TX_END + 20 + 1 + read-only + + + APP_SLAVE_WR + 21 + 1 + read-only + + + APP_SLAVE_WDATA_V + 22 + 1 + read-only + + + APP_RX_END + 23 + 1 + read-only + + + + + APP_DCACHE_DBUG1 + 0x41C + 0x20 + + + APP_CTAG_RAM_RDATA + 0 + 32 + read-only + + + + + APP_DCACHE_DBUG2 + 0x420 + 0x20 + + + APP_CACHE_VADDR + 0 + 27 + read-only + + + + + APP_DCACHE_DBUG3 + 0x424 + 0x20 + + + APP_MMU_RDATA + 0 + 9 + read-only + + + APP_CPU_DISABLED_CACHE_IA + 9 + 6 + read-only + + + APP_CPU_DISABLED_CACHE_IA_OPPOSITE + 9 + 1 + read-write + + + APP_CPU_DISABLED_CACHE_IA_DRAM1 + 10 + 1 + read-write + + + APP_CPU_DISABLED_CACHE_IA_IROM0 + 11 + 1 + read-write + + + APP_CPU_DISABLED_CACHE_IA_IRAM1 + 12 + 1 + read-write + + + APP_CPU_DISABLED_CACHE_IA_IRAM0 + 13 + 1 + read-write + + + APP_CPU_DISABLED_CACHE_IA_DROM0 + 14 + 1 + read-write + + + APP_CACHE_IRAM0_PID_ERROR + 15 + 1 + read-only + + + + + APP_DCACHE_DBUG4 + 0x428 + 0x20 + + + APP_DRAM1ADDR0_IA + 0 + 20 + read-only + + + + + APP_DCACHE_DBUG5 + 0x42C + 0x20 + + + APP_DROM0ADDR0_IA + 0 + 20 + read-only + + + + + APP_DCACHE_DBUG6 + 0x430 + 0x20 + + + APP_IRAM0ADDR_IA + 0 + 20 + read-only + + + + + APP_DCACHE_DBUG7 + 0x434 + 0x20 + + + APP_IRAM1ADDR_IA + 0 + 20 + read-only + + + + + APP_DCACHE_DBUG8 + 0x438 + 0x20 + + + APP_IROM0ADDR_IA + 0 + 20 + read-only + + + + + APP_DCACHE_DBUG9 + 0x43C + 0x20 + + + APP_OPSDRAMADDR_IA + 0 + 20 + read-only + + + + + PRO_CPU_RECORD_CTRL + 0x440 + 0x20 + 0x00000100 + + + PRO_CPU_RECORD_ENABLE + 0 + 1 + read-write + + + PRO_CPU_RECORD_DISABLE + 4 + 1 + read-write + + + PRO_CPU_PDEBUG_ENABLE + 8 + 1 + read-write + + + + + PRO_CPU_RECORD_STATUS + 0x444 + 0x20 + + + PRO_CPU_RECORDING + 0 + 1 + read-only + + + + + PRO_CPU_RECORD_PID + 0x448 + 0x20 + + + RECORD_PRO_PID + 0 + 3 + read-only + + + + + PRO_CPU_RECORD_PDEBUGINST + 0x44C + 0x20 + + + RECORD_PRO_PDEBUGINST + 0 + 32 + read-only + + + RECORD_PDEBUGINST_SZ + 0 + 8 + read-write + + + RECORD_PDEBUGINST_ISRC + 12 + 3 + read-write + + + RECORD_PDEBUGINST_LOOP_REP + 20 + 1 + read-write + + + RECORD_PDEBUGINST_LOOP + 21 + 1 + read-write + + + RECORD_PDEBUGINST_CINTL + 24 + 4 + read-write + + + + + PRO_CPU_RECORD_PDEBUGSTATUS + 0x450 + 0x20 + + + RECORD_PRO_PDEBUGSTATUS + 0 + 8 + read-only + + + RECORD_PDEBUGSTATUS_BBCAUSE + 0 + 6 + read-write + + + RECORD_PDEBUGSTATUS_INSNTYPE + 0 + 6 + read-write + + + + + PRO_CPU_RECORD_PDEBUGDATA + 0x454 + 0x20 + + + RECORD_PRO_PDEBUGDATA + 0 + 32 + read-only + + + RECORD_PDEBUGDATA_DEP_OTHER + 0 + 1 + read-write + + + RECORD_PDEBUGDATA_EXCVEC + 0 + 5 + read-write + + + RECORD_PDEBUGDATA_INSNTYPE_SR + 0 + 8 + read-write + + + RECORD_PDEBUGDATA_INSNTYPE_RER + 0 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_BUFF + 1 + 1 + read-write + + + RECORD_PDEBUGDATA_INSNTYPE_WER + 1 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_BUFFCONFL + 2 + 1 + read-write + + + RECORD_PDEBUGDATA_INSNTYPE_ER + 2 + 12 + read-write + + + RECORD_PDEBUGDATA_STALL_DCM + 3 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_LSU + 4 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_ICM + 6 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_IRAMBUSY + 7 + 1 + read-write + + + RECORD_PDEBUGDATA_DEP_LSU + 8 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_IPIF + 8 + 1 + read-write + + + RECORD_PDEBUGDATA_INSNTYPE_RSR + 8 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_TIE + 9 + 1 + read-write + + + RECORD_PDEBUGDATA_INSNTYPE_WSR + 9 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_RUN + 10 + 1 + read-write + + + RECORD_PDEBUGDATA_INSNTYPE_XSR + 10 + 1 + read-write + + + RECORD_PDEBUGDATA_DEP_STR + 11 + 1 + read-write + + + RECORD_PDEBUGDATA_DEP + 12 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_BPIFETCH + 12 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_L32R + 13 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_LSPROC + 14 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_BPLOAD + 15 + 1 + read-write + + + RECORD_PDEBUGDATA_DEP_MEMW + 16 + 1 + read-write + + + RECORD_PDEBUGDATA_EXCCAUSE + 16 + 6 + read-write + + + RECORD_PDEBUGDATA_STALL_BANKCONFL + 16 + 1 + read-write + + + RECORD_PDEBUGDATA_DEP_HALT + 17 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_ITERMUL + 18 + 1 + read-write + + + RECORD_PDEBUGDATA_STALL_ITERDIV + 19 + 1 + read-write + + + + + PRO_CPU_RECORD_PDEBUGPC + 0x458 + 0x20 + + + RECORD_PRO_PDEBUGPC + 0 + 32 + read-only + + + + + PRO_CPU_RECORD_PDEBUGLS0STAT + 0x45C + 0x20 + + + RECORD_PRO_PDEBUGLS0STAT + 0 + 32 + read-only + + + RECORD_PDEBUGLS0STAT_TYPE + 0 + 4 + read-write + + + RECORD_PDEBUGLS0STAT_SZ + 4 + 4 + read-write + + + RECORD_PDEBUGLS0STAT_DTLBM + 8 + 1 + read-write + + + RECORD_PDEBUGLS0STAT_DCM + 9 + 1 + read-write + + + RECORD_PDEBUGLS0STAT_DCH + 10 + 1 + read-write + + + RECORD_PDEBUGLS0STAT_UC + 12 + 1 + read-write + + + RECORD_PDEBUGLS0STAT_WB + 13 + 1 + read-write + + + RECORD_PDEBUGLS0STAT_COH + 16 + 1 + read-write + + + RECORD_PDEBUGLS0STAT_STCOH + 17 + 2 + read-write + + + RECORD_PDEBUGLS0STAT_TGT + 20 + 4 + read-write + + + + + PRO_CPU_RECORD_PDEBUGLS0ADDR + 0x460 + 0x20 + + + RECORD_PRO_PDEBUGLS0ADDR + 0 + 32 + read-only + + + + + PRO_CPU_RECORD_PDEBUGLS0DATA + 0x464 + 0x20 + + + RECORD_PRO_PDEBUGLS0DATA + 0 + 32 + read-only + + + + + APP_CPU_RECORD_CTRL + 0x468 + 0x20 + 0x00000100 + + + APP_CPU_RECORD_ENABLE + 0 + 1 + read-write + + + APP_CPU_RECORD_DISABLE + 4 + 1 + read-write + + + APP_CPU_PDEBUG_ENABLE + 8 + 1 + read-write + + + + + APP_CPU_RECORD_STATUS + 0x46C + 0x20 + + + APP_CPU_RECORDING + 0 + 1 + read-only + + + + + APP_CPU_RECORD_PID + 0x470 + 0x20 + + + RECORD_APP_PID + 0 + 3 + read-only + + + + + APP_CPU_RECORD_PDEBUGINST + 0x474 + 0x20 + + + RECORD_APP_PDEBUGINST + 0 + 32 + read-only + + + + + APP_CPU_RECORD_PDEBUGSTATUS + 0x478 + 0x20 + + + RECORD_APP_PDEBUGSTATUS + 0 + 8 + read-only + + + + + APP_CPU_RECORD_PDEBUGDATA + 0x47C + 0x20 + + + RECORD_APP_PDEBUGDATA + 0 + 32 + read-only + + + + + APP_CPU_RECORD_PDEBUGPC + 0x480 + 0x20 + + + RECORD_APP_PDEBUGPC + 0 + 32 + read-only + + + + + APP_CPU_RECORD_PDEBUGLS0STAT + 0x484 + 0x20 + + + RECORD_APP_PDEBUGLS0STAT + 0 + 32 + read-only + + + + + APP_CPU_RECORD_PDEBUGLS0ADDR + 0x488 + 0x20 + + + RECORD_APP_PDEBUGLS0ADDR + 0 + 32 + read-only + + + + + APP_CPU_RECORD_PDEBUGLS0DATA + 0x48C + 0x20 + + + RECORD_APP_PDEBUGLS0DATA + 0 + 32 + read-only + + + + + RSA_PD_CTRL + 0x490 + 0x20 + + + RSA_PD + 0 + 1 + read-write + + + + + ROM_MPU_TABLE0 + 0x494 + 0x20 + 0x00000001 + + + ROM_MPU_TABLE0 + 0 + 2 + read-write + + + + + ROM_MPU_TABLE1 + 0x498 + 0x20 + 0x00000001 + + + ROM_MPU_TABLE1 + 0 + 2 + read-write + + + + + ROM_MPU_TABLE2 + 0x49C + 0x20 + 0x00000001 + + + ROM_MPU_TABLE2 + 0 + 2 + read-write + + + + + ROM_MPU_TABLE3 + 0x4A0 + 0x20 + 0x00000001 + + + ROM_MPU_TABLE3 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE0 + 0x4A4 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE0 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE1 + 0x4A8 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE1 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE2 + 0x4AC + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE2 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE3 + 0x4B0 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE3 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE4 + 0x4B4 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE4 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE5 + 0x4B8 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE5 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE6 + 0x4BC + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE6 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE7 + 0x4C0 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE7 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE8 + 0x4C4 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE8 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE9 + 0x4C8 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE9 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE10 + 0x4CC + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE10 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE11 + 0x4D0 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE11 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE12 + 0x4D4 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE12 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE13 + 0x4D8 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE13 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE14 + 0x4DC + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE14 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE15 + 0x4E0 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE15 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE16 + 0x4E4 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE16 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE17 + 0x4E8 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE17 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE18 + 0x4EC + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE18 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE19 + 0x4F0 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE19 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE20 + 0x4F4 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE20 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE21 + 0x4F8 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE21 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE22 + 0x4FC + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE22 + 0 + 2 + read-write + + + + + SHROM_MPU_TABLE23 + 0x500 + 0x20 + 0x00000001 + + + SHROM_MPU_TABLE23 + 0 + 2 + read-write + + + + + IMMU_TABLE0 + 0x504 + 0x20 + + + IMMU_TABLE0 + 0 + 7 + read-write + + + + + IMMU_TABLE1 + 0x508 + 0x20 + 0x00000001 + + + IMMU_TABLE1 + 0 + 7 + read-write + + + + + IMMU_TABLE2 + 0x50C + 0x20 + 0x00000002 + + + IMMU_TABLE2 + 0 + 7 + read-write + + + + + IMMU_TABLE3 + 0x510 + 0x20 + 0x00000003 + + + IMMU_TABLE3 + 0 + 7 + read-write + + + + + IMMU_TABLE4 + 0x514 + 0x20 + 0x00000004 + + + IMMU_TABLE4 + 0 + 7 + read-write + + + + + IMMU_TABLE5 + 0x518 + 0x20 + 0x00000005 + + + IMMU_TABLE5 + 0 + 7 + read-write + + + + + IMMU_TABLE6 + 0x51C + 0x20 + 0x00000006 + + + IMMU_TABLE6 + 0 + 7 + read-write + + + + + IMMU_TABLE7 + 0x520 + 0x20 + 0x00000007 + + + IMMU_TABLE7 + 0 + 7 + read-write + + + + + IMMU_TABLE8 + 0x524 + 0x20 + 0x00000008 + + + IMMU_TABLE8 + 0 + 7 + read-write + + + + + IMMU_TABLE9 + 0x528 + 0x20 + 0x00000009 + + + IMMU_TABLE9 + 0 + 7 + read-write + + + + + IMMU_TABLE10 + 0x52C + 0x20 + 0x0000000A + + + IMMU_TABLE10 + 0 + 7 + read-write + + + + + IMMU_TABLE11 + 0x530 + 0x20 + 0x0000000B + + + IMMU_TABLE11 + 0 + 7 + read-write + + + + + IMMU_TABLE12 + 0x534 + 0x20 + 0x0000000C + + + IMMU_TABLE12 + 0 + 7 + read-write + + + + + IMMU_TABLE13 + 0x538 + 0x20 + 0x0000000D + + + IMMU_TABLE13 + 0 + 7 + read-write + + + + + IMMU_TABLE14 + 0x53C + 0x20 + 0x0000000E + + + IMMU_TABLE14 + 0 + 7 + read-write + + + + + IMMU_TABLE15 + 0x540 + 0x20 + 0x0000000F + + + IMMU_TABLE15 + 0 + 7 + read-write + + + + + DMMU_TABLE0 + 0x544 + 0x20 + + + DMMU_TABLE0 + 0 + 7 + read-write + + + + + DMMU_TABLE1 + 0x548 + 0x20 + 0x00000001 + + + DMMU_TABLE1 + 0 + 7 + read-write + + + + + DMMU_TABLE2 + 0x54C + 0x20 + 0x00000002 + + + DMMU_TABLE2 + 0 + 7 + read-write + + + + + DMMU_TABLE3 + 0x550 + 0x20 + 0x00000003 + + + DMMU_TABLE3 + 0 + 7 + read-write + + + + + DMMU_TABLE4 + 0x554 + 0x20 + 0x00000004 + + + DMMU_TABLE4 + 0 + 7 + read-write + + + + + DMMU_TABLE5 + 0x558 + 0x20 + 0x00000005 + + + DMMU_TABLE5 + 0 + 7 + read-write + + + + + DMMU_TABLE6 + 0x55C + 0x20 + 0x00000006 + + + DMMU_TABLE6 + 0 + 7 + read-write + + + + + DMMU_TABLE7 + 0x560 + 0x20 + 0x00000007 + + + DMMU_TABLE7 + 0 + 7 + read-write + + + + + DMMU_TABLE8 + 0x564 + 0x20 + 0x00000008 + + + DMMU_TABLE8 + 0 + 7 + read-write + + + + + DMMU_TABLE9 + 0x568 + 0x20 + 0x00000009 + + + DMMU_TABLE9 + 0 + 7 + read-write + + + + + DMMU_TABLE10 + 0x56C + 0x20 + 0x0000000A + + + DMMU_TABLE10 + 0 + 7 + read-write + + + + + DMMU_TABLE11 + 0x570 + 0x20 + 0x0000000B + + + DMMU_TABLE11 + 0 + 7 + read-write + + + + + DMMU_TABLE12 + 0x574 + 0x20 + 0x0000000C + + + DMMU_TABLE12 + 0 + 7 + read-write + + + + + DMMU_TABLE13 + 0x578 + 0x20 + 0x0000000D + + + DMMU_TABLE13 + 0 + 7 + read-write + + + + + DMMU_TABLE14 + 0x57C + 0x20 + 0x0000000E + + + DMMU_TABLE14 + 0 + 7 + read-write + + + + + DMMU_TABLE15 + 0x580 + 0x20 + 0x0000000F + + + DMMU_TABLE15 + 0 + 7 + read-write + + + + + PRO_INTRUSION_CTRL + 0x584 + 0x20 + 0x00000001 + + + PRO_INTRUSION_RECORD_RESET_N + 0 + 1 + read-write + + + + + PRO_INTRUSION_STATUS + 0x588 + 0x20 + + + PRO_INTRUSION_RECORD + 0 + 4 + read-only + + + + + APP_INTRUSION_CTRL + 0x58C + 0x20 + 0x00000001 + + + APP_INTRUSION_RECORD_RESET_N + 0 + 1 + read-write + + + + + APP_INTRUSION_STATUS + 0x590 + 0x20 + + + APP_INTRUSION_RECORD + 0 + 4 + read-only + + + + + FRONT_END_MEM_PD + 0x594 + 0x20 + 0x00000005 + + + AGC_MEM_FORCE_PU + 0 + 1 + read-write + + + AGC_MEM_FORCE_PD + 1 + 1 + read-write + + + PBUS_MEM_FORCE_PU + 2 + 1 + read-write + + + PBUS_MEM_FORCE_PD + 3 + 1 + read-write + + + + + MMU_IA_INT_EN + 0x598 + 0x20 + + + MMU_IA_INT_EN + 0 + 24 + read-write + + + + + MPU_IA_INT_EN + 0x59C + 0x20 + + + MPU_IA_INT_EN + 0 + 17 + read-write + + + + + CACHE_IA_INT_EN + 0x5A0 + 0x20 + + + CACHE_IA_INT_EN + Interrupt enable bits for various invalid cache access reasons + 0 + 28 + read-write + + + CACHE_IA_INT_APP_DROM0 + APP CPU invalid access to DROM0 when cache is disabled + 0 + 1 + read-write + + + CACHE_IA_INT_APP_IRAM0 + APP CPU invalid access to IRAM0 when cache is disabled + 1 + 1 + read-write + + + CACHE_IA_INT_APP_IRAM1 + APP CPU invalid access to IRAM1 when cache is disabled + 2 + 1 + read-write + + + CACHE_IA_INT_APP_IROM0 + APP CPU invalid access to IROM0 when cache is disabled + 3 + 1 + read-write + + + CACHE_IA_INT_APP_DRAM1 + APP CPU invalid access to DRAM1 when cache is disabled + 4 + 1 + read-write + + + CACHE_IA_INT_APP_OPPOSITE + APP CPU invalid access to APP CPU cache when cache disabled + 5 + 1 + read-write + + + CACHE_IA_INT_PRO_DROM0 + PRO CPU invalid access to DROM0 when cache is disabled + 14 + 1 + read-write + + + CACHE_IA_INT_PRO_IRAM0 + PRO CPU invalid access to IRAM0 when cache is disabled + 15 + 1 + read-write + + + CACHE_IA_INT_PRO_IRAM1 + PRO CPU invalid access to IRAM1 when cache is disabled + 16 + 1 + read-write + + + CACHE_IA_INT_PRO_IROM0 + PRO CPU invalid access to IROM0 when cache is disabled + 17 + 1 + read-write + + + CACHE_IA_INT_PRO_DRAM1 + PRO CPU invalid access to DRAM1 when cache is disabled + 18 + 1 + read-write + + + CACHE_IA_INT_PRO_OPPOSITE + PRO CPU invalid access to APP CPU cache when cache disabled + 19 + 1 + read-write + + + + + SECURE_BOOT_CTRL + 0x5A4 + 0x20 + + + SW_BOOTLOADER_SEL + 0 + 1 + read-write + + + + + SPI_DMA_CHAN_SEL + 0x5A8 + 0x20 + + + SPI1_DMA_CHAN_SEL + 0 + 2 + read-write + + + SPI2_DMA_CHAN_SEL + 2 + 2 + read-write + + + SPI3_DMA_CHAN_SEL + 4 + 2 + read-write + + + + + PRO_VECBASE_CTRL + 0x5AC + 0x20 + + + PRO_OUT_VECBASE_SEL + 0 + 2 + read-write + + + + + PRO_VECBASE_SET + 0x5B0 + 0x20 + + + PRO_OUT_VECBASE + 0 + 22 + read-write + + + + + APP_VECBASE_CTRL + 0x5B4 + 0x20 + + + APP_OUT_VECBASE_SEL + 0 + 2 + read-write + + + + + APP_VECBASE_SET + 0x5B8 + 0x20 + + + APP_OUT_VECBASE + 0 + 22 + read-write + + + + + DATE + 0xFFC + 0x20 + 0x01605190 + + + DATE + 0 + 28 + read-write + + + + + + + EFUSE + eFuse Controller + EFUSE + 0x3FF5A000 + + 0x0 + 0x124 + registers + + + EFUSE + 44 + + + + BLK0_RDATA0 + 0x0 + 0x20 + + + RD_EFUSE_WR_DIS + read for efuse_wr_disable + 0 + 16 + read-only + + + RD_EFUSE_RD_DIS + read for efuse_rd_disable + 16 + 4 + read-only + + + RD_FLASH_CRYPT_CNT + read for flash_crypt_cnt + 20 + 7 + read-only + + + + + BLK0_RDATA1 + 0x4 + 0x20 + + + RD_WIFI_MAC_CRC_LOW + read for low 32bit WIFI_MAC_Address + 0 + 32 + read-only + + + + + BLK0_RDATA2 + 0x8 + 0x20 + + + RD_WIFI_MAC_CRC_HIGH + read for high 24bit WIFI_MAC_Address + 0 + 24 + read-only + + + + + BLK0_RDATA3 + 0xC + 0x20 + + + RD_CHIP_VER_DIS_APP_CPU + 0 + 1 + read-only + + + RD_CHIP_VER_DIS_BT + 1 + 1 + read-only + + + RD_CHIP_VER_PKG_4BIT + most significant bit of chip package + 2 + 1 + read-only + + + RD_CHIP_VER_DIS_CACHE + 3 + 1 + read-only + + + RD_SPI_PAD_CONFIG_HD + read for SPI_pad_config_hd + 4 + 5 + read-only + + + RD_CHIP_VER_PKG + least significant bits of chip package + 9 + 3 + read-write + + + RD_CHIP_CPU_FREQ_LOW + If set alongside EFUSE_RD_CHIP_CPU_FREQ_RATED, the ESP32's max CPU frequency is rated for 160MHz. 240MHz otherwise + 12 + 1 + read-write + + + RD_CHIP_CPU_FREQ_RATED + If set, the ESP32's maximum CPU frequency has been rated + 13 + 1 + read-write + + + RD_BLK3_PART_RESERVE + If set, this bit indicates that BLOCK3[143:96] is reserved for internal use + 14 + 1 + read-write + + + RD_CHIP_VER_REV1 + bit is set to 1 for rev1 silicon + 15 + 1 + read-write + + + + + BLK0_RDATA4 + 0x10 + 0x20 + + + RD_CK8M_FREQ + 0 + 8 + read-only + + + RD_ADC_VREF + True ADC reference voltage + 8 + 5 + read-write + + + RD_SDIO_DREFH + 8 + 2 + read-only + + + RD_SDIO_DREFM + 10 + 2 + read-only + + + RD_SDIO_DREFL + 12 + 2 + read-only + + + RD_XPD_SDIO + read for XPD_SDIO_REG + 14 + 1 + read-only + + + RD_SDIO_TIEH + read for SDIO_TIEH + 15 + 1 + read-only + + + RD_SDIO_FORCE + read for sdio_force + 16 + 1 + read-only + + + + + BLK0_RDATA5 + 0x14 + 0x20 + + + RD_SPI_PAD_CONFIG_CLK + read for SPI_pad_config_clk + 0 + 5 + read-only + + + RD_SPI_PAD_CONFIG_Q + read for SPI_pad_config_q + 5 + 5 + read-only + + + RD_SPI_PAD_CONFIG_D + read for SPI_pad_config_d + 10 + 5 + read-only + + + RD_SPI_PAD_CONFIG_CS0 + read for SPI_pad_config_cs0 + 15 + 5 + read-only + + + RD_CHIP_VER_REV2 + 20 + 1 + read-only + + + RD_VOL_LEVEL_HP_INV + This field stores the voltage level for CPU to run at 240 MHz, or for flash/PSRAM to run at 80 MHz.0x0: level 7; 0x1: level 6; 0x2: level 5; 0x3: level 4. (RO) + 22 + 2 + read-only + + + RD_WAFER_VERSION_MINOR + 24 + 2 + read-only + + + RD_FLASH_CRYPT_CONFIG + read for flash_crypt_config + 28 + 4 + read-only + + + + + BLK0_RDATA6 + 0x18 + 0x20 + + + RD_CODING_SCHEME + read for coding_scheme + 0 + 2 + read-only + + + RD_CONSOLE_DEBUG_DISABLE + read for console_debug_disable + 2 + 1 + read-only + + + RD_DISABLE_SDIO_HOST + 3 + 1 + read-only + + + RD_ABS_DONE_0 + read for abstract_done_0 + 4 + 1 + read-only + + + RD_ABS_DONE_1 + read for abstract_done_1 + 5 + 1 + read-only + + + RD_DISABLE_JTAG + read for JTAG_disable + 6 + 1 + read-only + + + RD_DISABLE_DL_ENCRYPT + read for download_dis_encrypt + 7 + 1 + read-only + + + RD_DISABLE_DL_DECRYPT + read for download_dis_decrypt + 8 + 1 + read-only + + + RD_DISABLE_DL_CACHE + read for download_dis_cache + 9 + 1 + read-only + + + RD_KEY_STATUS + read for key_status + 10 + 1 + read-only + + + + + BLK0_WDATA0 + 0x1C + 0x20 + + + WR_DIS + program for efuse_wr_disable + 0 + 16 + read-write + + + RD_DIS + program for efuse_rd_disable + 16 + 4 + read-write + + + FLASH_CRYPT_CNT + program for flash_crypt_cnt + 20 + 7 + read-write + + + + + BLK0_WDATA1 + 0x20 + 0x20 + + + WIFI_MAC_CRC_LOW + program for low 32bit WIFI_MAC_Address + 0 + 32 + read-write + + + + + BLK0_WDATA2 + 0x24 + 0x20 + + + WIFI_MAC_CRC_HIGH + program for high 24bit WIFI_MAC_Address + 0 + 24 + read-write + + + + + BLK0_WDATA3 + 0x28 + 0x20 + + + CHIP_VER_DIS_APP_CPU + 0 + 1 + read-write + + + CHIP_VER_DIS_BT + 1 + 1 + read-write + + + CHIP_VER_PKG_4BIT + most significant bit of chip package + 2 + 1 + read-only + + + CHIP_VER_DIS_CACHE + 3 + 1 + read-write + + + SPI_PAD_CONFIG_HD + program for SPI_pad_config_hd + 4 + 5 + read-write + + + CHIP_VER_PKG + least significant bits of chip package + 9 + 3 + read-write + + + CHIP_CPU_FREQ_LOW + If set alongside EFUSE_CHIP_CPU_FREQ_RATED, the ESP32's max CPU frequency is rated for 160MHz. 240MHz otherwise + 12 + 1 + read-write + + + CHIP_CPU_FREQ_RATED + If set, the ESP32's maximum CPU frequency has been rated + 13 + 1 + read-write + + + BLK3_PART_RESERVE + If set, this bit indicates that BLOCK3[143:96] is reserved for internal use + 14 + 1 + read-write + + + CHIP_VER_REV1 + 15 + 1 + read-write + + + + + BLK0_WDATA4 + 0x2C + 0x20 + + + CK8M_FREQ + 0 + 8 + read-write + + + ADC_VREF + True ADC reference voltage + 8 + 5 + read-write + + + SDIO_DREFH + 8 + 2 + read-write + + + SDIO_DREFM + 10 + 2 + read-write + + + SDIO_DREFL + 12 + 2 + read-write + + + XPD_SDIO + program for XPD_SDIO_REG + 14 + 1 + read-write + + + SDIO_TIEH + program for SDIO_TIEH + 15 + 1 + read-write + + + SDIO_FORCE + program for sdio_force + 16 + 1 + read-write + + + + + BLK0_WDATA5 + 0x30 + 0x20 + + + SPI_PAD_CONFIG_CLK + program for SPI_pad_config_clk + 0 + 5 + read-write + + + SPI_PAD_CONFIG_Q + program for SPI_pad_config_q + 5 + 5 + read-write + + + SPI_PAD_CONFIG_D + program for SPI_pad_config_d + 10 + 5 + read-write + + + SPI_PAD_CONFIG_CS0 + program for SPI_pad_config_cs0 + 15 + 5 + read-write + + + INST_CONFIG + 20 + 8 + read-write + + + VOL_LEVEL_HP_INV + This field stores the voltage level for CPU to run at 240 MHz, or for flash/PSRAM to run at 80 MHz.0x0: level 7; 0x1: level 6; 0x2: level 5; 0x3: level 4. (R/W) + 22 + 2 + read-write + + + DIG_VOL_L6 + 24 + 4 + read-write + + + FLASH_CRYPT_CONFIG + program for flash_crypt_config + 28 + 4 + read-write + + + + + BLK0_WDATA6 + 0x34 + 0x20 + + + CODING_SCHEME + program for coding_scheme + 0 + 2 + read-write + + + CONSOLE_DEBUG_DISABLE + program for console_debug_disable + 2 + 1 + read-write + + + DISABLE_SDIO_HOST + 3 + 1 + read-write + + + ABS_DONE_0 + program for abstract_done_0 + 4 + 1 + read-write + + + ABS_DONE_1 + program for abstract_done_1 + 5 + 1 + read-write + + + DISABLE_JTAG + program for JTAG_disable + 6 + 1 + read-write + + + DISABLE_DL_ENCRYPT + program for download_dis_encrypt + 7 + 1 + read-write + + + DISABLE_DL_DECRYPT + program for download_dis_decrypt + 8 + 1 + read-write + + + DISABLE_DL_CACHE + program for download_dis_cache + 9 + 1 + read-write + + + KEY_STATUS + program for key_status + 10 + 1 + read-write + + + + + BLK1_RDATA0 + 0x38 + 0x20 + + + BLK1_DOUT0 + read for BLOCK1 + 0 + 32 + read-only + + + + + BLK1_RDATA1 + 0x3C + 0x20 + + + BLK1_DOUT1 + read for BLOCK1 + 0 + 32 + read-only + + + + + BLK1_RDATA2 + 0x40 + 0x20 + + + BLK1_DOUT2 + read for BLOCK1 + 0 + 32 + read-only + + + + + BLK1_RDATA3 + 0x44 + 0x20 + + + BLK1_DOUT3 + read for BLOCK1 + 0 + 32 + read-only + + + + + BLK1_RDATA4 + 0x48 + 0x20 + + + BLK1_DOUT4 + read for BLOCK1 + 0 + 32 + read-only + + + + + BLK1_RDATA5 + 0x4C + 0x20 + + + BLK1_DOUT5 + read for BLOCK1 + 0 + 32 + read-only + + + + + BLK1_RDATA6 + 0x50 + 0x20 + + + BLK1_DOUT6 + read for BLOCK1 + 0 + 32 + read-only + + + + + BLK1_RDATA7 + 0x54 + 0x20 + + + BLK1_DOUT7 + read for BLOCK1 + 0 + 32 + read-only + + + + + BLK2_RDATA0 + 0x58 + 0x20 + + + BLK2_DOUT0 + read for BLOCK2 + 0 + 32 + read-only + + + + + BLK2_RDATA1 + 0x5C + 0x20 + + + BLK2_DOUT1 + read for BLOCK2 + 0 + 32 + read-only + + + + + BLK2_RDATA2 + 0x60 + 0x20 + + + BLK2_DOUT2 + read for BLOCK2 + 0 + 32 + read-only + + + + + BLK2_RDATA3 + 0x64 + 0x20 + + + BLK2_DOUT3 + read for BLOCK2 + 0 + 32 + read-only + + + + + BLK2_RDATA4 + 0x68 + 0x20 + + + BLK2_DOUT4 + read for BLOCK2 + 0 + 32 + read-only + + + + + BLK2_RDATA5 + 0x6C + 0x20 + + + BLK2_DOUT5 + read for BLOCK2 + 0 + 32 + read-only + + + + + BLK2_RDATA6 + 0x70 + 0x20 + + + BLK2_DOUT6 + read for BLOCK2 + 0 + 32 + read-only + + + + + BLK2_RDATA7 + 0x74 + 0x20 + + + BLK2_DOUT7 + read for BLOCK2 + 0 + 32 + read-only + + + + + BLK3_RDATA0 + 0x78 + 0x20 + + + BLK3_DOUT0 + read for BLOCK3 + 0 + 32 + read-only + + + + + BLK3_RDATA1 + 0x7C + 0x20 + + + BLK3_DOUT1 + read for BLOCK3 + 0 + 32 + read-only + + + + + BLK3_RDATA2 + 0x80 + 0x20 + + + BLK3_DOUT2 + read for BLOCK3 + 0 + 32 + read-only + + + + + BLK3_RDATA3 + 0x84 + 0x20 + + + BLK3_DOUT3 + read for BLOCK3 + 0 + 32 + read-only + + + RD_ADC1_TP_LOW + ADC1 Two Point calibration low point. Only valid if EFUSE_RD_BLK3_PART_RESERVE + 0 + 7 + read-write + + + RD_ADC1_TP_HIGH + ADC1 Two Point calibration high point. Only valid if EFUSE_RD_BLK3_PART_RESERVE + 7 + 9 + read-write + + + RD_ADC2_TP_LOW + ADC2 Two Point calibration low point. Only valid if EFUSE_RD_BLK3_PART_RESERVE + 16 + 7 + read-write + + + RD_ADC2_TP_HIGH + ADC2 Two Point calibration high point. Only valid if EFUSE_RD_BLK3_PART_RESERVE + 23 + 9 + read-write + + + + + BLK3_RDATA4 + 0x88 + 0x20 + + + BLK3_DOUT4 + read for BLOCK3 + 0 + 32 + read-only + + + RD_CAL_RESERVED + Reserved for future calibration use. Indicated by EFUSE_RD_BLK3_PART_RESERVE + 0 + 16 + read-write + + + + + BLK3_RDATA5 + 0x8C + 0x20 + + + BLK3_DOUT5 + read for BLOCK3 + 0 + 32 + read-only + + + + + BLK3_RDATA6 + 0x90 + 0x20 + + + BLK3_DOUT6 + read for BLOCK3 + 0 + 32 + read-only + + + + + BLK3_RDATA7 + 0x94 + 0x20 + + + BLK3_DOUT7 + read for BLOCK3 + 0 + 32 + read-only + + + + + BLK1_WDATA0 + 0x98 + 0x20 + + + BLK1_DIN0 + program for BLOCK1 + 0 + 32 + read-write + + + + + BLK1_WDATA1 + 0x9C + 0x20 + + + BLK1_DIN1 + program for BLOCK1 + 0 + 32 + read-write + + + + + BLK1_WDATA2 + 0xA0 + 0x20 + + + BLK1_DIN2 + program for BLOCK1 + 0 + 32 + read-write + + + + + BLK1_WDATA3 + 0xA4 + 0x20 + + + BLK1_DIN3 + program for BLOCK1 + 0 + 32 + read-write + + + + + BLK1_WDATA4 + 0xA8 + 0x20 + + + BLK1_DIN4 + program for BLOCK1 + 0 + 32 + read-write + + + + + BLK1_WDATA5 + 0xAC + 0x20 + + + BLK1_DIN5 + program for BLOCK1 + 0 + 32 + read-write + + + + + BLK1_WDATA6 + 0xB0 + 0x20 + + + BLK1_DIN6 + program for BLOCK1 + 0 + 32 + read-write + + + + + BLK1_WDATA7 + 0xB4 + 0x20 + + + BLK1_DIN7 + program for BLOCK1 + 0 + 32 + read-write + + + + + BLK2_WDATA0 + 0xB8 + 0x20 + + + BLK2_DIN0 + program for BLOCK2 + 0 + 32 + read-write + + + + + BLK2_WDATA1 + 0xBC + 0x20 + + + BLK2_DIN1 + program for BLOCK2 + 0 + 32 + read-write + + + + + BLK2_WDATA2 + 0xC0 + 0x20 + + + BLK2_DIN2 + program for BLOCK2 + 0 + 32 + read-write + + + + + BLK2_WDATA3 + 0xC4 + 0x20 + + + BLK2_DIN3 + program for BLOCK2 + 0 + 32 + read-write + + + + + BLK2_WDATA4 + 0xC8 + 0x20 + + + BLK2_DIN4 + program for BLOCK2 + 0 + 32 + read-write + + + + + BLK2_WDATA5 + 0xCC + 0x20 + + + BLK2_DIN5 + program for BLOCK2 + 0 + 32 + read-write + + + + + BLK2_WDATA6 + 0xD0 + 0x20 + + + BLK2_DIN6 + program for BLOCK2 + 0 + 32 + read-write + + + + + BLK2_WDATA7 + 0xD4 + 0x20 + + + BLK2_DIN7 + program for BLOCK2 + 0 + 32 + read-write + + + + + BLK3_WDATA0 + 0xD8 + 0x20 + + + BLK3_DIN0 + program for BLOCK3 + 0 + 32 + read-write + + + + + BLK3_WDATA1 + 0xDC + 0x20 + + + BLK3_DIN1 + program for BLOCK3 + 0 + 32 + read-write + + + + + BLK3_WDATA2 + 0xE0 + 0x20 + + + BLK3_DIN2 + program for BLOCK3 + 0 + 32 + read-write + + + + + BLK3_WDATA3 + 0xE4 + 0x20 + + + BLK3_DIN3 + program for BLOCK3 + 0 + 32 + read-write + + + ADC1_TP_LOW + ADC1 Two Point calibration low point. Only valid if EFUSE_RD_BLK3_PART_RESERVE + 0 + 7 + read-write + + + ADC1_TP_HIGH + ADC1 Two Point calibration high point. Only valid if EFUSE_RD_BLK3_PART_RESERVE + 7 + 9 + read-write + + + ADC2_TP_LOW + ADC2 Two Point calibration low point. Only valid if EFUSE_RD_BLK3_PART_RESERVE + 16 + 7 + read-write + + + ADC2_TP_HIGH + ADC2 Two Point calibration high point. Only valid if EFUSE_RD_BLK3_PART_RESERVE + 23 + 9 + read-write + + + + + BLK3_WDATA4 + 0xE8 + 0x20 + + + BLK3_DIN4 + program for BLOCK3 + 0 + 32 + read-write + + + CAL_RESERVED + Reserved for future calibration use. Indicated by EFUSE_BLK3_PART_RESERVE + 0 + 16 + read-write + + + + + BLK3_WDATA5 + 0xEC + 0x20 + + + BLK3_DIN5 + program for BLOCK3 + 0 + 32 + read-write + + + + + BLK3_WDATA6 + 0xF0 + 0x20 + + + BLK3_DIN6 + program for BLOCK3 + 0 + 32 + read-write + + + + + BLK3_WDATA7 + 0xF4 + 0x20 + + + BLK3_DIN7 + program for BLOCK3 + 0 + 32 + read-write + + + + + CLK + 0xF8 + 0x20 + 0x00004052 + + + SEL0 + efuse timing configure + 0 + 8 + read-write + + + SEL1 + efuse timing configure + 8 + 8 + read-write + + + EN + 16 + 1 + read-write + + + + + CONF + 0xFC + 0x20 + 0x00010000 + + + OP_CODE + efuse operation code + 0 + 16 + read-write + + + FORCE_NO_WR_RD_DIS + 16 + 1 + read-write + + + + + STATUS + 0x100 + 0x20 + + + DEBUG + 0 + 32 + read-only + + + + + CMD + 0x104 + 0x20 + + + READ_CMD + command for read + 0 + 1 + read-write + + + PGM_CMD + command for program + 1 + 1 + read-write + + + + + INT_RAW + 0x108 + 0x20 + + + READ_DONE_INT_RAW + read done interrupt raw status + 0 + 1 + read-only + + + PGM_DONE_INT_RAW + program done interrupt raw status + 1 + 1 + read-only + + + + + INT_ST + 0x10C + 0x20 + + + READ_DONE_INT_ST + read done interrupt status + 0 + 1 + read-only + + + PGM_DONE_INT_ST + program done interrupt status + 1 + 1 + read-only + + + + + INT_ENA + 0x110 + 0x20 + + + READ_DONE_INT_ENA + read done interrupt enable + 0 + 1 + read-write + + + PGM_DONE_INT_ENA + program done interrupt enable + 1 + 1 + read-write + + + + + INT_CLR + 0x114 + 0x20 + + + READ_DONE_INT_CLR + read done interrupt clear + 0 + 1 + write-only + + + PGM_DONE_INT_CLR + program done interrupt clear + 1 + 1 + write-only + + + + + DAC_CONF + 0x118 + 0x20 + 0x00000028 + + + DAC_CLK_DIV + efuse timing configure + 0 + 8 + read-write + + + DAC_CLK_PAD_SEL + 8 + 1 + read-write + + + + + DEC_STATUS + 0x11C + 0x20 + + + DEC_WARNINGS + the decode result of 3/4 coding scheme has warning + 0 + 12 + read-only + + + + + DATE + 0x1FC + 0x20 + 0x16042600 + + + DATE + 0 + 32 + read-write + + + + + + + FLASH_ENCRYPTION + Flash Encryption Peripheral + FLASH_ENCRYPTION + 0x3FF46000 + + 0x0 + 0x2C + registers + + + + 8 + 0x4 + BUFFER_%s + 0x0 + 0x20 + + + BUFFER + Data buffers for encryption. + 0 + 8 + write-only + + + + + START + 0x20 + 0x20 + + + FLASH_START + Set this bit to start encryption operation on data buffer. + 0 + 8 + write-only + + + + + ADDRESS + 0x24 + 0x20 + + + ADDRESS + The physical address on the off-chip flash must be 8-word boundary aligned. + 0 + 8 + write-only + + + + + DONE + 0x28 + 0x20 + + + FLASH_DONE + Set this bit when encryption operation is complete. + 0 + 1 + read-only + + + + + + + FRC_TIMER + Peripheral FRC_TIMER + FRC + 0x3FF47000 + + 0x0 + 0x14 + registers + + + + TIMER_LOAD + 0x0 + 0x20 + + + VALUE + 0 + 8 + read-write + + + + + TIMER_COUNT + 0x4 + 0x20 + + + TIMER_COUNT + 0 + 8 + read-write + + + + + TIMER_CTRL + 0x8 + 0x20 + + + TIMER_PRESCALER + 1 + 8 + read-write + + + + + TIMER_INT + 0xC + 0x20 + + + CLR + 0 + 1 + read-write + + + + + TIMER_ALARM + 0x10 + 0x20 + + + TIMER_ALARM + 0 + 8 + read-write + + + + + + + GPIO + General Purpose Input/Output + GPIO + 0x3FF44000 + + 0x0 + 0x5CC + registers + + + GPIO + 22 + + + GPIO_NMI + 23 + + + + BT_SELECT + 0x0 + 0x20 + + + BT_SEL + NA + 0 + 32 + read-write + + + + + OUT + 0x4 + 0x20 + + + DATA + GPIO0~31 output value + 0 + 32 + read-write + + + + + OUT_W1TS + 0x8 + 0x20 + + + OUT_DATA_W1TS + GPIO0~31 output value write 1 to set + 0 + 32 + read-write + + + + + OUT_W1TC + 0xC + 0x20 + + + OUT_DATA_W1TC + GPIO0~31 output value write 1 to clear + 0 + 32 + read-write + + + + + OUT1 + 0x10 + 0x20 + + + DATA + GPIO32~39 output value + 0 + 8 + read-write + + + + + OUT1_W1TS + 0x14 + 0x20 + + + OUT1_DATA_W1TS + GPIO32~39 output value write 1 to set + 0 + 8 + read-write + + + + + OUT1_W1TC + 0x18 + 0x20 + + + OUT1_DATA_W1TC + GPIO32~39 output value write 1 to clear + 0 + 8 + read-write + + + + + SDIO_SELECT + 0x1C + 0x20 + + + SDIO_SEL + SDIO PADS on/off control from outside + 0 + 8 + read-write + + + + + ENABLE + 0x20 + 0x20 + + + DATA + GPIO0~31 output enable + 0 + 32 + read-write + + + + + ENABLE_W1TS + 0x24 + 0x20 + + + ENABLE_DATA_W1TS + GPIO0~31 output enable write 1 to set + 0 + 32 + read-write + + + + + ENABLE_W1TC + 0x28 + 0x20 + + + ENABLE_DATA_W1TC + GPIO0~31 output enable write 1 to clear + 0 + 32 + read-write + + + + + ENABLE1 + 0x2C + 0x20 + + + DATA + GPIO32~39 output enable + 0 + 8 + read-write + + + + + ENABLE1_W1TS + 0x30 + 0x20 + + + ENABLE1_DATA_W1TS + GPIO32~39 output enable write 1 to set + 0 + 8 + read-write + + + + + ENABLE1_W1TC + 0x34 + 0x20 + + + ENABLE1_DATA_W1TC + GPIO32~39 output enable write 1 to clear + 0 + 8 + read-write + + + + + STRAP + 0x38 + 0x20 + + + STRAPPING + {10'b0, MTDI, GPIO0, GPIO2, GPIO4, MTDO, GPIO5} + 0 + 16 + read-only + + + + + IN + 0x3C + 0x20 + + + DATA_NEXT + GPIO0~31 input value + 0 + 32 + read-write + + + + + IN1 + 0x40 + 0x20 + + + DATA_NEXT + GPIO32~39 input value + 0 + 8 + read-write + + + + + STATUS + 0x44 + 0x20 + + + INT + GPIO0~31 interrupt status + 0 + 32 + read-write + + + + + STATUS_W1TS + 0x48 + 0x20 + + + STATUS_INT_W1TS + GPIO0~31 interrupt status write 1 to set + 0 + 32 + read-write + + + + + STATUS_W1TC + 0x4C + 0x20 + + + STATUS_INT_W1TC + GPIO0~31 interrupt status write 1 to clear + 0 + 32 + read-write + + + + + STATUS1 + 0x50 + 0x20 + + + INT + GPIO32~39 interrupt status + 0 + 8 + read-write + + + + + STATUS1_W1TS + 0x54 + 0x20 + + + STATUS1_INT_W1TS + GPIO32~39 interrupt status write 1 to set + 0 + 8 + read-write + + + + + STATUS1_W1TC + 0x58 + 0x20 + + + STATUS1_INT_W1TC + GPIO32~39 interrupt status write 1 to clear + 0 + 8 + read-write + + + + + ACPU_INT + 0x60 + 0x20 + + + APPCPU_INT + GPIO0~31 APP CPU interrupt status + 0 + 32 + read-only + + + + + ACPU_NMI_INT + 0x64 + 0x20 + + + APPCPU_NMI_INT + GPIO0~31 APP CPU non-maskable interrupt status + 0 + 32 + read-only + + + + + PCPU_INT + 0x68 + 0x20 + + + PROCPU_INT + GPIO0~31 PRO CPU interrupt status + 0 + 32 + read-only + + + + + PCPU_NMI_INT + 0x6C + 0x20 + + + PROCPU_NMI_INT + GPIO0~31 PRO CPU non-maskable interrupt status + 0 + 32 + read-only + + + + + CPUSDIO_INT + 0x70 + 0x20 + + + SDIO_INT + SDIO's extent GPIO0~31 interrupt + 0 + 32 + read-only + + + + + ACPU_INT1 + 0x74 + 0x20 + + + APPCPU_INT_H + GPIO32~39 APP CPU interrupt status + 0 + 8 + read-only + + + + + ACPU_NMI_INT1 + 0x78 + 0x20 + + + APPCPU_NMI_INT_H + GPIO32~39 APP CPU non-maskable interrupt status + 0 + 8 + read-only + + + + + PCPU_INT1 + 0x7C + 0x20 + + + PROCPU_INT_H + GPIO32~39 PRO CPU interrupt status + 0 + 8 + read-only + + + + + PCPU_NMI_INT1 + 0x80 + 0x20 + + + PROCPU_NMI_INT_H + GPIO32~39 PRO CPU non-maskable interrupt status + 0 + 8 + read-only + + + + + CPUSDIO_INT1 + 0x84 + 0x20 + + + SDIO_INT_H + SDIO's extent GPIO32~39 interrupt + 0 + 8 + read-only + + + PIN_PAD_DRIVER + 2 + 1 + read-write + + + PIN_INT_TYPE + 7 + 3 + read-write + + + PIN_WAKEUP_ENABLE + 10 + 1 + read-write + + + PIN_CONFIG + 11 + 2 + read-write + + + PIN_INT_ENA + 13 + 5 + read-write + + + + + 40 + 0x4 + 0-39 + PIN%s + 0x88 + 0x20 + + + PAD_DRIVER + if set to 0: normal output if set to 1: open drain + 2 + 1 + read-write + + + INT_TYPE + if set to 0: GPIO interrupt disable if set to 1: rising edge trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger + 7 + 3 + read-write + + + WAKEUP_ENABLE + GPIO wake up enable only available in light sleep + 10 + 1 + read-write + + + CONFIG + NA + 11 + 2 + read-write + + + INT_ENA + bit0: APP CPU interrupt enable bit1: APP CPU non-maskable interrupt enable bit3: PRO CPU interrupt enable bit4: PRO CPU non-maskable interrupt enable bit5: SDIO's extent interrupt enable + 13 + 5 + read-write + + + + + cali_conf + 0x128 + 0x20 + + + CALI_RTC_MAX + 0 + 10 + read-write + + + CALI_START + 31 + 1 + read-write + + + + + cali_data + 0x12C + 0x20 + + + CALI_VALUE_SYNC2 + 0 + 20 + read-only + + + CALI_RDY_REAL + 30 + 1 + read-only + + + CALI_RDY_SYNC2 + 31 + 1 + read-only + + + + + 256 + 0x4 + 0-255 + FUNC%s_IN_SEL_CFG + 0x130 + 0x20 + + + IN_SEL + select one of the 256 inputs + 0 + 6 + read-write + + + IN_INV_SEL + revert the value of the input if you want to revert please set the value to 1 + 6 + 1 + read-write + + + SEL + if the slow signal bypass the io matrix or not if you want setting the value to 1 + 7 + 1 + read-write + + + + + 40 + 0x4 + 0-39 + FUNC%s_OUT_SEL_CFG + 0x530 + 0x20 + + + OUT_SEL + select one of the 256 output to 40 GPIO + 0 + 9 + read-write + + + INV_SEL + invert the output value if you want to revert the output value setting the value to 1 + 9 + 1 + read-write + + + OEN_SEL + weather using the logical oen signal or not using the value setting by the register + 10 + 1 + read-write + + + OEN_INV_SEL + invert the output enable value if you want to revert the output enable value setting the value to 1 + 11 + 1 + read-write + + + + + + + GPIO_SD + Sigma-Delta Modulation + GPIO_SIGMADELTA + 0x3FF44F00 + + 0x0 + 0x2C + registers + + + + SIGMADELTA0 + 0x0 + 0x20 + 0x0000FF00 + + + SD0_IN + 0 + 8 + read-write + + + SD0_PRESCALE + 8 + 8 + read-write + + + + + SIGMADELTA1 + 0x4 + 0x20 + 0x0000FF00 + + + SD1_IN + 0 + 8 + read-write + + + SD1_PRESCALE + 8 + 8 + read-write + + + + + SIGMADELTA2 + 0x8 + 0x20 + 0x0000FF00 + + + SD2_IN + 0 + 8 + read-write + + + SD2_PRESCALE + 8 + 8 + read-write + + + + + SIGMADELTA3 + 0xC + 0x20 + 0x0000FF00 + + + SD3_IN + 0 + 8 + read-write + + + SD3_PRESCALE + 8 + 8 + read-write + + + + + SIGMADELTA4 + 0x10 + 0x20 + 0x0000FF00 + + + SD4_IN + 0 + 8 + read-write + + + SD4_PRESCALE + 8 + 8 + read-write + + + + + SIGMADELTA5 + 0x14 + 0x20 + 0x0000FF00 + + + SD5_IN + 0 + 8 + read-write + + + SD5_PRESCALE + 8 + 8 + read-write + + + + + SIGMADELTA6 + 0x18 + 0x20 + 0x0000FF00 + + + SD6_IN + 0 + 8 + read-write + + + SD6_PRESCALE + 8 + 8 + read-write + + + + + SIGMADELTA7 + 0x1C + 0x20 + 0x0000FF00 + + + SD7_IN + 0 + 8 + read-write + + + SD7_PRESCALE + 8 + 8 + read-write + + + + + CG + 0x20 + 0x20 + + + SD_CLK_EN + 31 + 1 + read-write + + + + + MISC + 0x24 + 0x20 + + + SPI_SWAP + 31 + 1 + read-write + + + + + VERSION + 0x28 + 0x20 + 0x01506190 + + + SD_DATE + 0 + 28 + read-write + + + + + + + HINF + Peripheral HINF + HINF + 0x3FF4B000 + + 0x0 + 0x34 + registers + + + + CFG_DATA0 + 0x0 + 0x20 + 0x22226666 + + + USER_ID_FN1 + 0 + 16 + read-write + + + DEVICE_ID_FN1 + 16 + 16 + read-write + + + + + CFG_DATA1 + 0x4 + 0x20 + 0x01110011 + + + SDIO_ENABLE + 0 + 1 + read-write + + + SDIO_IOREADY1 + 1 + 1 + read-write + + + HIGHSPEED_ENABLE + 2 + 1 + read-write + + + HIGHSPEED_MODE + 3 + 1 + read-only + + + SDIO_CD_ENABLE + 4 + 1 + read-write + + + SDIO_IOREADY2 + 5 + 1 + read-write + + + SDIO_INT_MASK + 6 + 1 + read-write + + + IOENABLE2 + 7 + 1 + read-only + + + CD_DISABLE + 8 + 1 + read-only + + + FUNC1_EPS + 9 + 1 + read-only + + + EMP + 10 + 1 + read-only + + + IOENABLE1 + 11 + 1 + read-only + + + SDIO20_CONF0 + 12 + 4 + read-write + + + SDIO_VER + 16 + 12 + read-write + + + FUNC2_EPS + 28 + 1 + read-only + + + SDIO20_CONF1 + 29 + 3 + read-write + + + + + CFG_DATA7 + 0x1C + 0x20 + 0x00020000 + + + PIN_STATE + 0 + 8 + read-write + + + CHIP_STATE + 8 + 8 + read-write + + + SDIO_RST + 16 + 1 + read-write + + + SDIO_IOREADY0 + 17 + 1 + read-write + + + + + CIS_CONF0 + 0x20 + 0x20 + 0xFFFFFFFF + + + CIS_CONF_W0 + 0 + 32 + read-write + + + + + CIS_CONF1 + 0x24 + 0x20 + 0xFFFFFFFF + + + CIS_CONF_W1 + 0 + 32 + read-write + + + + + CIS_CONF2 + 0x28 + 0x20 + 0xFFFFFFFF + + + CIS_CONF_W2 + 0 + 32 + read-write + + + + + CIS_CONF3 + 0x2C + 0x20 + 0xFFFFFFFF + + + CIS_CONF_W3 + 0 + 32 + read-write + + + + + CIS_CONF4 + 0x30 + 0x20 + 0xFFFFFFFF + + + CIS_CONF_W4 + 0 + 32 + read-write + + + + + CIS_CONF5 + 0x34 + 0x20 + 0xFFFFFFFF + + + CIS_CONF_W5 + 0 + 32 + read-write + + + + + CIS_CONF6 + 0x38 + 0x20 + 0xFFFFFFFF + + + CIS_CONF_W6 + 0 + 32 + read-write + + + + + CIS_CONF7 + 0x3C + 0x20 + 0xFFFFFFFF + + + CIS_CONF_W7 + 0 + 32 + read-write + + + + + CFG_DATA16 + 0x40 + 0x20 + 0x33336666 + + + USER_ID_FN2 + 0 + 16 + read-write + + + DEVICE_ID_FN2 + 16 + 16 + read-write + + + + + DATE + 0xFC + 0x20 + 0x15030200 + + + SDIO_DATE + 0 + 32 + read-write + + + + + + + I2C0 + I2C (Inter-Integrated Circuit) Controller + I2C + 0x3FF53000 + + 0x0 + 0x9C + registers + + + I2C_EXT0 + 49 + + + + SCL_LOW_PERIOD + 0x0 + 0x20 + + + SCL_LOW_PERIOD + This register is used to configure the low level width of SCL clock. + 0 + 14 + read-write + + + + + CTR + 0x4 + 0x20 + 0x00000003 + + + SDA_FORCE_OUT + 1: normally ouput sda data 0: exchange the function of sda_o and sda_oe (sda_o is the original internal output sda signal sda_oe is the enable bit for the internal output sda signal) + 0 + 1 + read-write + + + SCL_FORCE_OUT + 1: normally ouput scl clock 0: exchange the function of scl_o and scl_oe (scl_o is the original internal output scl signal scl_oe is the enable bit for the internal output scl signal) + 1 + 1 + read-write + + + SAMPLE_SCL_LEVEL + Set this bit to sample data in SCL low level. clear this bit to sample data in SCL high level. + 2 + 1 + read-write + + + MS_MODE + Set this bit to configure the module as i2c master clear this bit to configure the module as i2c slave. + 4 + 1 + read-write + + + TRANS_START + Set this bit to start sending data in txfifo. + 5 + 1 + read-write + + + TX_LSB_FIRST + This bit is used to control the sending mode for data need to be send. 1: receive data from most significant bit 0: receive data from least significant bit + 6 + 1 + read-write + + + RX_LSB_FIRST + This bit is used to control the storage mode for received datas. 1: receive data from most significant bit 0: receive data from least significant bit + 7 + 1 + read-write + + + CLK_EN + This is the clock gating control bit for reading or writing registers. + 8 + 1 + read-write + + + + + SR + 0x8 + 0x20 + + + ACK_REC + This register stores the value of ACK bit. + 0 + 1 + read-only + + + SLAVE_RW + when in slave mode 1: master read slave 0: master write slave. + 1 + 1 + read-only + + + TIME_OUT + when I2C takes more than time_out_reg clocks to receive a data then this register changes to high level. + 2 + 1 + read-only + + + ARB_LOST + when I2C lost control of SDA line this register changes to high level. + 3 + 1 + read-only + + + BUS_BUSY + 1:I2C bus is busy transferring data. 0:I2C bus is in idle state. + 4 + 1 + read-only + + + SLAVE_ADDRESSED + when configured as i2c slave and the address send by master is equal to slave's address then this bit will be high level. + 5 + 1 + read-only + + + BYTE_TRANS + This register changes to high level when one byte is transferred. + 6 + 1 + read-only + + + RXFIFO_CNT + This register represent the amount of data need to send. + 8 + 6 + read-only + + + TXFIFO_CNT + This register stores the amount of received data in ram. + 18 + 6 + read-only + + + SCL_MAIN_STATE_LAST + This register stores the value of state machine for i2c module. 3'h0: SCL_MAIN_IDLE 3'h1: SCL_ADDRESS_SHIFT 3'h2: SCL_ACK_ADDRESS 3'h3: SCL_RX_DATA 3'h4 SCL_TX_DATA 3'h5:SCL_SEND_ACK 3'h6:SCL_WAIT_ACK + 24 + 3 + read-only + + + SCL_STATE_LAST + This register stores the value of state machine to produce SCL. 3'h0: SCL_IDLE 3'h1:SCL_START 3'h2:SCL_LOW_EDGE 3'h3: SCL_LOW 3'h4:SCL_HIGH_EDGE 3'h5:SCL_HIGH 3'h6:SCL_STOP + 28 + 3 + read-only + + + + + TO + 0xC + 0x20 + + + TIME_OUT + This register is used to configure the max clock number of receiving a data. + 0 + 20 + read-write + + + + + SLAVE_ADDR + 0x10 + 0x20 + + + SLAVE_ADDR + when configured as i2c slave this register is used to configure slave's address. + 0 + 15 + read-write + + + ADDR_10BIT_EN + This register is used to enable slave 10bit address mode. + 31 + 1 + read-write + + + + + RXFIFO_ST + 0x14 + 0x20 + + + RXFIFO_START_ADDR + This is the offset address of the last receiving data as described in nonfifo_rx_thres_register. + 0 + 5 + read-only + + + RXFIFO_END_ADDR + This is the offset address of the first receiving data as described in nonfifo_rx_thres_register. + 5 + 5 + read-only + + + TXFIFO_START_ADDR + This is the offset address of the first sending data as described in nonfifo_tx_thres register. + 10 + 5 + read-only + + + TXFIFO_END_ADDR + This is the offset address of the last sending data as described in nonfifo_tx_thres register. + 15 + 5 + read-only + + + + + FIFO_CONF + 0x18 + 0x20 + 0x0155408B + + + RXFIFO_FULL_THRHD + 0 + 5 + read-write + + + TXFIFO_EMPTY_THRHD + Config txfifo empty threhd value when using apb fifo access + 5 + 5 + read-write + + + NONFIFO_EN + Set this bit to enble apb nonfifo access. + 10 + 1 + read-write + + + FIFO_ADDR_CFG_EN + When this bit is set to 1 then the byte after address represent the offset address of I2C Slave's ram. + 11 + 1 + read-write + + + RX_FIFO_RST + Set this bit to reset rx fifo when using apb fifo access. + 12 + 1 + read-write + + + TX_FIFO_RST + Set this bit to reset tx fifo when using apb fifo access. + 13 + 1 + read-write + + + NONFIFO_RX_THRES + when I2C receives more than nonfifo_rx_thres data it will produce rx_send_full_int_raw interrupt and update the current offset address of the receiving data. + 14 + 6 + read-write + + + NONFIFO_TX_THRES + when I2C sends more than nonfifo_tx_thres data it will produce tx_send_empty_int_raw interrupt and update the current offset address of the sending data. + 20 + 6 + read-write + + + + + DATA + 0x1C + 0x20 + + + FIFO_RDATA + The register represent the byte data read from rxfifo when use apb fifo access + 0 + 8 + read-only + + + + + INT_RAW + 0x20 + 0x20 + + + RXFIFO_FULL_INT_RAW + The raw interrupt status bit for rxfifo full when use apb fifo access. + 0 + 1 + read-only + + + TXFIFO_EMPTY_INT_RAW + The raw interrupt status bit for txfifo empty when use apb fifo access. + 1 + 1 + read-only + + + RXFIFO_OVF_INT_RAW + The raw interrupt status bit for receiving data overflow when use apb fifo access. + 2 + 1 + read-only + + + END_DETECT_INT_RAW + The raw interrupt status bit for end_detect_int interrupt. when I2C deals with the END command it will produce end_detect_int interrupt. + 3 + 1 + read-only + + + SLAVE_TRAN_COMP_INT_RAW + The raw interrupt status bit for slave_tran_comp_int interrupt. when I2C Slave detectsthe STOP bit it will produce slave_tran_comp_int interrupt. + 4 + 1 + read-only + + + ARBITRATION_LOST_INT_RAW + The raw interrupt status bit for arbitration_lost_int interrupt.when I2C lost the usage right of I2C BUS it will produce arbitration_lost_int interrupt. + 5 + 1 + read-only + + + MASTER_TRAN_COMP_INT_RAW + The raw interrupt status bit for master_tra_comp_int interrupt. when I2C Master sends or receives a byte it will produce master_tran_comp_int interrupt. + 6 + 1 + read-only + + + TRANS_COMPLETE_INT_RAW + The raw interrupt status bit for trans_complete_int interrupt. when I2C Master finished STOP command it will produce trans_complete_int interrupt. + 7 + 1 + read-only + + + TIME_OUT_INT_RAW + The raw interrupt status bit for time_out_int interrupt. when I2C takes a lot of time to receive a data it will produce time_out_int interrupt. + 8 + 1 + read-only + + + TRANS_START_INT_RAW + The raw interrupt status bit for trans_start_int interrupt. when I2C sends the START bit it will produce trans_start_int interrupt. + 9 + 1 + read-only + + + ACK_ERR_INT_RAW + The raw interrupt status bit for ack_err_int interrupt. when I2C receives a wrong ACK bit it will produce ack_err_int interrupt.. + 10 + 1 + read-only + + + RX_REC_FULL_INT_RAW + The raw interrupt status bit for rx_rec_full_int interrupt. when I2C receives more data than nonfifo_rx_thres it will produce rx_rec_full_int interrupt. + 11 + 1 + read-only + + + TX_SEND_EMPTY_INT_RAW + The raw interrupt status bit for tx_send_empty_int interrupt.when I2C sends more data than nonfifo_tx_thres it will produce tx_send_empty_int interrupt.. + 12 + 1 + read-only + + + + + INT_CLR + 0x24 + 0x20 + + + RXFIFO_FULL_INT_CLR + Set this bit to clear the rxfifo_full_int interrupt. + 0 + 1 + write-only + + + TXFIFO_EMPTY_INT_CLR + Set this bit to clear the txfifo_empty_int interrupt. + 1 + 1 + write-only + + + RXFIFO_OVF_INT_CLR + Set this bit to clear the rxfifo_ovf_int interrupt. + 2 + 1 + write-only + + + END_DETECT_INT_CLR + Set this bit to clear the end_detect_int interrupt. + 3 + 1 + write-only + + + SLAVE_TRAN_COMP_INT_CLR + Set this bit to clear the slave_tran_comp_int interrupt. + 4 + 1 + write-only + + + ARBITRATION_LOST_INT_CLR + Set this bit to clear the arbitration_lost_int interrupt. + 5 + 1 + write-only + + + MASTER_TRAN_COMP_INT_CLR + Set this bit to clear the master_tran_comp interrupt. + 6 + 1 + write-only + + + TRANS_COMPLETE_INT_CLR + Set this bit to clear the trans_complete_int interrupt. + 7 + 1 + write-only + + + TIME_OUT_INT_CLR + Set this bit to clear the time_out_int interrupt. + 8 + 1 + write-only + + + TRANS_START_INT_CLR + Set this bit to clear the trans_start_int interrupt. + 9 + 1 + write-only + + + ACK_ERR_INT_CLR + Set this bit to clear the ack_err_int interrupt. + 10 + 1 + write-only + + + RX_REC_FULL_INT_CLR + Set this bit to clear the rx_rec_full_int interrupt. + 11 + 1 + write-only + + + TX_SEND_EMPTY_INT_CLR + Set this bit to clear the tx_send_empty_int interrupt. + 12 + 1 + write-only + + + + + INT_ENA + 0x28 + 0x20 + + + RXFIFO_FULL_INT_ENA + The enable bit for rxfifo_full_int interrupt. + 0 + 1 + read-write + + + TXFIFO_EMPTY_INT_ENA + The enable bit for txfifo_empty_int interrupt. + 1 + 1 + read-write + + + RXFIFO_OVF_INT_ENA + The enable bit for rxfifo_ovf_int interrupt. + 2 + 1 + read-write + + + END_DETECT_INT_ENA + The enable bit for end_detect_int interrupt. + 3 + 1 + read-write + + + SLAVE_TRAN_COMP_INT_ENA + The enable bit for slave_tran_comp_int interrupt. + 4 + 1 + read-write + + + ARBITRATION_LOST_INT_ENA + The enable bit for arbitration_lost_int interrupt. + 5 + 1 + read-write + + + MASTER_TRAN_COMP_INT_ENA + The enable bit for master_tran_comp_int interrupt. + 6 + 1 + read-write + + + TRANS_COMPLETE_INT_ENA + The enable bit for trans_complete_int interrupt. + 7 + 1 + read-write + + + TIME_OUT_INT_ENA + The enable bit for time_out_int interrupt. + 8 + 1 + read-write + + + TRANS_START_INT_ENA + The enable bit for trans_start_int interrupt. + 9 + 1 + read-write + + + ACK_ERR_INT_ENA + The enable bit for ack_err_int interrupt. + 10 + 1 + read-write + + + RX_REC_FULL_INT_ENA + The enable bit for rx_rec_full_int interrupt. + 11 + 1 + read-write + + + TX_SEND_EMPTY_INT_ENA + The enable bit for tx_send_empty_int interrupt. + 12 + 1 + read-write + + + + + INT_STATUS + 0x2C + 0x20 + + + RXFIFO_FULL_INT_ST + The masked interrupt status for rxfifo_full_int interrupt. + 0 + 1 + read-only + + + TXFIFO_EMPTY_INT_ST + The masked interrupt status for txfifo_empty_int interrupt. + 1 + 1 + read-only + + + RXFIFO_OVF_INT_ST + The masked interrupt status for rxfifo_ovf_int interrupt. + 2 + 1 + read-only + + + END_DETECT_INT_ST + The masked interrupt status for end_detect_int interrupt. + 3 + 1 + read-only + + + SLAVE_TRAN_COMP_INT_ST + The masked interrupt status for slave_tran_comp_int interrupt. + 4 + 1 + read-only + + + ARBITRATION_LOST_INT_ST + The masked interrupt status for arbitration_lost_int interrupt. + 5 + 1 + read-only + + + MASTER_TRAN_COMP_INT_ST + The masked interrupt status for master_tran_comp_int interrupt. + 6 + 1 + read-only + + + TRANS_COMPLETE_INT_ST + The masked interrupt status for trans_complete_int interrupt. + 7 + 1 + read-only + + + TIME_OUT_INT_ST + The masked interrupt status for time_out_int interrupt. + 8 + 1 + read-only + + + TRANS_START_INT_ST + The masked interrupt status for trans_start_int interrupt. + 9 + 1 + read-only + + + ACK_ERR_INT_ST + The masked interrupt status for ack_err_int interrupt. + 10 + 1 + read-only + + + RX_REC_FULL_INT_ST + The masked interrupt status for rx_rec_full_int interrupt. + 11 + 1 + read-only + + + TX_SEND_EMPTY_INT_ST + The masked interrupt status for tx_send_empty_int interrupt. + 12 + 1 + read-only + + + + + SDA_HOLD + 0x30 + 0x20 + + + TIME + This register is used to configure the clock num I2C used to hold the data after the negedge of SCL. + 0 + 10 + read-write + + + + + SDA_SAMPLE + 0x34 + 0x20 + + + TIME + This register is used to configure the clock num I2C used to sample data on SDA after the posedge of SCL + 0 + 10 + read-write + + + + + SCL_HIGH_PERIOD + 0x38 + 0x20 + + + SCL_HIGH_PERIOD + This register is used to configure the clock num during SCL is low level. + 0 + 14 + read-write + + + + + SCL_START_HOLD + 0x40 + 0x20 + 0x00000008 + + + TIME + This register is used to configure the clock num between the negedge of SDA and negedge of SCL for start mark. + 0 + 10 + read-write + + + + + SCL_RSTART_SETUP + 0x44 + 0x20 + 0x00000008 + + + TIME + This register is used to configure the clock num between the posedge of SCL and the negedge of SDA for restart mark. + 0 + 10 + read-write + + + + + SCL_STOP_HOLD + 0x48 + 0x20 + + + TIME + This register is used to configure the clock num after the STOP bit's posedge. + 0 + 14 + read-write + + + + + SCL_STOP_SETUP + 0x4C + 0x20 + + + TIME + This register is used to configure the clock num between the posedge of SCL and the posedge of SDA. + 0 + 10 + read-write + + + + + SCL_FILTER_CFG + 0x50 + 0x20 + 0x00000008 + + + SCL_FILTER_THRES + When input SCL's pulse width is smaller than this register value I2C ignores this pulse. + 0 + 3 + read-write + + + SCL_FILTER_EN + This is the filter enable bit for SCL. + 3 + 1 + read-write + + + + + SDA_FILTER_CFG + 0x54 + 0x20 + 0x00000008 + + + SDA_FILTER_THRES + When input SCL's pulse width is smaller than this register value I2C ignores this pulse. + 0 + 3 + read-write + + + SDA_FILTER_EN + This is the filter enable bit for SDA. + 3 + 1 + read-write + + + + + 16 + 0x4 + 0-15 + COMD%s + 0x58 + 0x20 + + + COMMAND + This is the content of command0. It consists of three part. op_code is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit. + 0 + 14 + read-write + + + COMMAND_DONE + When command0 is done in I2C Master mode this bit changes to high level. + 31 + 1 + read-write + + + + + DATE + 0xF8 + 0x20 + 0x16042000 + + + DATE + 0 + 32 + read-write + + + + + FIFO_START_ADDR + 0x100 + 0x20 + + + + + I2C1 + I2C (Inter-Integrated Circuit) Controller + 0x3FF67000 + + I2C_EXT1 + 50 + + + + I2S0 + I2S (Inter-IC Sound) Controller + I2S + 0x3FF4F000 + + 0x0 + 0xB4 + registers + + + I2S0 + 32 + + + + CONF + 0x8 + 0x20 + 0x00030300 + + + TX_RESET + 0 + 1 + read-write + + + RX_RESET + 1 + 1 + read-write + + + TX_FIFO_RESET + 2 + 1 + read-write + + + RX_FIFO_RESET + 3 + 1 + read-write + + + TX_START + 4 + 1 + read-write + + + RX_START + 5 + 1 + read-write + + + TX_SLAVE_MOD + 6 + 1 + read-write + + + RX_SLAVE_MOD + 7 + 1 + read-write + + + TX_RIGHT_FIRST + 8 + 1 + read-write + + + RX_RIGHT_FIRST + 9 + 1 + read-write + + + TX_MSB_SHIFT + 10 + 1 + read-write + + + RX_MSB_SHIFT + 11 + 1 + read-write + + + TX_SHORT_SYNC + 12 + 1 + read-write + + + RX_SHORT_SYNC + 13 + 1 + read-write + + + TX_MONO + 14 + 1 + read-write + + + RX_MONO + 15 + 1 + read-write + + + TX_MSB_RIGHT + 16 + 1 + read-write + + + RX_MSB_RIGHT + 17 + 1 + read-write + + + SIG_LOOPBACK + 18 + 1 + read-write + + + + + INT_RAW + 0xC + 0x20 + + + RX_TAKE_DATA_INT_RAW + 0 + 1 + read-only + + + TX_PUT_DATA_INT_RAW + 1 + 1 + read-only + + + RX_WFULL_INT_RAW + 2 + 1 + read-only + + + RX_REMPTY_INT_RAW + 3 + 1 + read-only + + + TX_WFULL_INT_RAW + 4 + 1 + read-only + + + TX_REMPTY_INT_RAW + 5 + 1 + read-only + + + RX_HUNG_INT_RAW + 6 + 1 + read-only + + + TX_HUNG_INT_RAW + 7 + 1 + read-only + + + IN_DONE_INT_RAW + 8 + 1 + read-only + + + IN_SUC_EOF_INT_RAW + 9 + 1 + read-only + + + IN_ERR_EOF_INT_RAW + 10 + 1 + read-only + + + OUT_DONE_INT_RAW + 11 + 1 + read-only + + + OUT_EOF_INT_RAW + 12 + 1 + read-only + + + IN_DSCR_ERR_INT_RAW + 13 + 1 + read-only + + + OUT_DSCR_ERR_INT_RAW + 14 + 1 + read-only + + + IN_DSCR_EMPTY_INT_RAW + 15 + 1 + read-only + + + OUT_TOTAL_EOF_INT_RAW + 16 + 1 + read-only + + + + + INT_ST + 0x10 + 0x20 + + + RX_TAKE_DATA_INT_ST + 0 + 1 + read-only + + + TX_PUT_DATA_INT_ST + 1 + 1 + read-only + + + RX_WFULL_INT_ST + 2 + 1 + read-only + + + RX_REMPTY_INT_ST + 3 + 1 + read-only + + + TX_WFULL_INT_ST + 4 + 1 + read-only + + + TX_REMPTY_INT_ST + 5 + 1 + read-only + + + RX_HUNG_INT_ST + 6 + 1 + read-only + + + TX_HUNG_INT_ST + 7 + 1 + read-only + + + IN_DONE_INT_ST + 8 + 1 + read-only + + + IN_SUC_EOF_INT_ST + 9 + 1 + read-only + + + IN_ERR_EOF_INT_ST + 10 + 1 + read-only + + + OUT_DONE_INT_ST + 11 + 1 + read-only + + + OUT_EOF_INT_ST + 12 + 1 + read-only + + + IN_DSCR_ERR_INT_ST + 13 + 1 + read-only + + + OUT_DSCR_ERR_INT_ST + 14 + 1 + read-only + + + IN_DSCR_EMPTY_INT_ST + 15 + 1 + read-only + + + OUT_TOTAL_EOF_INT_ST + 16 + 1 + read-only + + + + + INT_ENA + 0x14 + 0x20 + + + RX_TAKE_DATA_INT_ENA + 0 + 1 + read-write + + + TX_PUT_DATA_INT_ENA + 1 + 1 + read-write + + + RX_WFULL_INT_ENA + 2 + 1 + read-write + + + RX_REMPTY_INT_ENA + 3 + 1 + read-write + + + TX_WFULL_INT_ENA + 4 + 1 + read-write + + + TX_REMPTY_INT_ENA + 5 + 1 + read-write + + + RX_HUNG_INT_ENA + 6 + 1 + read-write + + + TX_HUNG_INT_ENA + 7 + 1 + read-write + + + IN_DONE_INT_ENA + 8 + 1 + read-write + + + IN_SUC_EOF_INT_ENA + 9 + 1 + read-write + + + IN_ERR_EOF_INT_ENA + 10 + 1 + read-write + + + OUT_DONE_INT_ENA + 11 + 1 + read-write + + + OUT_EOF_INT_ENA + 12 + 1 + read-write + + + IN_DSCR_ERR_INT_ENA + 13 + 1 + read-write + + + OUT_DSCR_ERR_INT_ENA + 14 + 1 + read-write + + + IN_DSCR_EMPTY_INT_ENA + 15 + 1 + read-write + + + OUT_TOTAL_EOF_INT_ENA + 16 + 1 + read-write + + + + + INT_CLR + 0x18 + 0x20 + + + TAKE_DATA_INT_CLR + 0 + 1 + write-only + + + PUT_DATA_INT_CLR + 1 + 1 + write-only + + + RX_WFULL_INT_CLR + 2 + 1 + write-only + + + RX_REMPTY_INT_CLR + 3 + 1 + write-only + + + TX_WFULL_INT_CLR + 4 + 1 + write-only + + + TX_REMPTY_INT_CLR + 5 + 1 + write-only + + + RX_HUNG_INT_CLR + 6 + 1 + write-only + + + TX_HUNG_INT_CLR + 7 + 1 + write-only + + + IN_DONE_INT_CLR + 8 + 1 + write-only + + + IN_SUC_EOF_INT_CLR + 9 + 1 + write-only + + + IN_ERR_EOF_INT_CLR + 10 + 1 + write-only + + + OUT_DONE_INT_CLR + 11 + 1 + write-only + + + OUT_EOF_INT_CLR + 12 + 1 + write-only + + + IN_DSCR_ERR_INT_CLR + 13 + 1 + write-only + + + OUT_DSCR_ERR_INT_CLR + 14 + 1 + write-only + + + IN_DSCR_EMPTY_INT_CLR + 15 + 1 + write-only + + + OUT_TOTAL_EOF_INT_CLR + 16 + 1 + write-only + + + + + TIMING + 0x1C + 0x20 + + + TX_BCK_IN_DELAY + 0 + 2 + read-write + + + TX_WS_IN_DELAY + 2 + 2 + read-write + + + RX_BCK_IN_DELAY + 4 + 2 + read-write + + + RX_WS_IN_DELAY + 6 + 2 + read-write + + + RX_SD_IN_DELAY + 8 + 2 + read-write + + + TX_BCK_OUT_DELAY + 10 + 2 + read-write + + + TX_WS_OUT_DELAY + 12 + 2 + read-write + + + TX_SD_OUT_DELAY + 14 + 2 + read-write + + + RX_WS_OUT_DELAY + 16 + 2 + read-write + + + RX_BCK_OUT_DELAY + 18 + 2 + read-write + + + TX_DSYNC_SW + 20 + 1 + read-write + + + RX_DSYNC_SW + 21 + 1 + read-write + + + DATA_ENABLE_DELAY + 22 + 2 + read-write + + + TX_BCK_IN_INV + 24 + 1 + read-write + + + + + FIFO_CONF + 0x20 + 0x20 + 0x00001820 + + + RX_DATA_NUM + 0 + 6 + read-write + + + TX_DATA_NUM + 6 + 6 + read-write + + + DSCR_EN + 12 + 1 + read-write + + + TX_FIFO_MOD + 13 + 3 + read-write + + + RX_FIFO_MOD + 16 + 3 + read-write + + + TX_FIFO_MOD_FORCE_EN + 19 + 1 + read-write + + + RX_FIFO_MOD_FORCE_EN + 20 + 1 + read-write + + + + + RXEOF_NUM + 0x24 + 0x20 + 0x00000040 + + + RX_EOF_NUM + 0 + 32 + read-write + + + + + CONF_SIGLE_DATA + 0x28 + 0x20 + + + SIGLE_DATA + 0 + 32 + read-write + + + + + CONF_CHAN + 0x2C + 0x20 + + + TX_CHAN_MOD + 0 + 3 + read-write + + + RX_CHAN_MOD + 3 + 2 + read-write + + + + + OUT_LINK + 0x30 + 0x20 + + + OUTLINK_ADDR + 0 + 20 + read-write + + + OUTLINK_STOP + 28 + 1 + read-write + + + OUTLINK_START + 29 + 1 + read-write + + + OUTLINK_RESTART + 30 + 1 + read-write + + + OUTLINK_PARK + 31 + 1 + read-only + + + + + IN_LINK + 0x34 + 0x20 + + + INLINK_ADDR + 0 + 20 + read-write + + + INLINK_STOP + 28 + 1 + read-write + + + INLINK_START + 29 + 1 + read-write + + + INLINK_RESTART + 30 + 1 + read-write + + + INLINK_PARK + 31 + 1 + read-only + + + + + OUT_EOF_DES_ADDR + 0x38 + 0x20 + + + OUT_EOF_DES_ADDR + 0 + 32 + read-only + + + + + IN_EOF_DES_ADDR + 0x3C + 0x20 + + + IN_SUC_EOF_DES_ADDR + 0 + 32 + read-only + + + + + OUT_EOF_BFR_DES_ADDR + 0x40 + 0x20 + + + OUT_EOF_BFR_DES_ADDR + 0 + 32 + read-only + + + + + AHB_TEST + 0x44 + 0x20 + + + AHB_TESTMODE + 0 + 3 + read-write + + + AHB_TESTADDR + 4 + 2 + read-write + + + + + INLINK_DSCR + 0x48 + 0x20 + + + INLINK_DSCR + 0 + 32 + read-only + + + + + INLINK_DSCR_BF0 + 0x4C + 0x20 + + + INLINK_DSCR_BF0 + 0 + 32 + read-only + + + + + INLINK_DSCR_BF1 + 0x50 + 0x20 + + + INLINK_DSCR_BF1 + 0 + 32 + read-only + + + + + OUTLINK_DSCR + 0x54 + 0x20 + + + OUTLINK_DSCR + 0 + 32 + read-only + + + + + OUTLINK_DSCR_BF0 + 0x58 + 0x20 + + + OUTLINK_DSCR_BF0 + 0 + 32 + read-only + + + + + OUTLINK_DSCR_BF1 + 0x5C + 0x20 + + + OUTLINK_DSCR_BF1 + 0 + 32 + read-only + + + + + LC_CONF + 0x60 + 0x20 + 0x00000100 + + + IN_RST + 0 + 1 + read-write + + + OUT_RST + 1 + 1 + read-write + + + AHBM_FIFO_RST + 2 + 1 + read-write + + + AHBM_RST + 3 + 1 + read-write + + + OUT_LOOP_TEST + 4 + 1 + read-write + + + IN_LOOP_TEST + 5 + 1 + read-write + + + OUT_AUTO_WRBACK + 6 + 1 + read-write + + + OUT_NO_RESTART_CLR + 7 + 1 + read-write + + + OUT_EOF_MODE + 8 + 1 + read-write + + + OUTDSCR_BURST_EN + 9 + 1 + read-write + + + INDSCR_BURST_EN + 10 + 1 + read-write + + + OUT_DATA_BURST_EN + 11 + 1 + read-write + + + CHECK_OWNER + 12 + 1 + read-write + + + MEM_TRANS_EN + 13 + 1 + read-write + + + + + OUTFIFO_PUSH + 0x64 + 0x20 + + + OUTFIFO_WDATA + 0 + 9 + read-write + + + OUTFIFO_PUSH + 16 + 1 + read-write + + + + + INFIFO_POP + 0x68 + 0x20 + + + INFIFO_RDATA + 0 + 12 + read-only + + + INFIFO_POP + 16 + 1 + read-write + + + + + LC_STATE0 + 0x6C + 0x20 + + + LC_STATE0 + 0 + 32 + read-only + + + + + LC_STATE1 + 0x70 + 0x20 + + + LC_STATE1 + 0 + 32 + read-only + + + + + LC_HUNG_CONF + 0x74 + 0x20 + 0x00000810 + + + LC_FIFO_TIMEOUT + 0 + 8 + read-write + + + LC_FIFO_TIMEOUT_SHIFT + 8 + 3 + read-write + + + LC_FIFO_TIMEOUT_ENA + 11 + 1 + read-write + + + + + CVSD_CONF0 + 0x80 + 0x20 + 0x80007FFF + + + CVSD_Y_MAX + 0 + 16 + read-write + + + CVSD_Y_MIN + 16 + 16 + read-write + + + + + CVSD_CONF1 + 0x84 + 0x20 + 0x000A0500 + + + CVSD_SIGMA_MAX + 0 + 16 + read-write + + + CVSD_SIGMA_MIN + 16 + 16 + read-write + + + + + CVSD_CONF2 + 0x88 + 0x20 + 0x000502A4 + + + CVSD_K + 0 + 3 + read-write + + + CVSD_J + 3 + 3 + read-write + + + CVSD_BETA + 6 + 10 + read-write + + + CVSD_H + 16 + 3 + read-write + + + + + PLC_CONF0 + 0x8C + 0x20 + 0x08A80339 + + + GOOD_PACK_MAX + 0 + 6 + read-write + + + N_ERR_SEG + 6 + 3 + read-write + + + SHIFT_RATE + 9 + 3 + read-write + + + MAX_SLIDE_SAMPLE + 12 + 8 + read-write + + + PACK_LEN_8K + 20 + 5 + read-write + + + N_MIN_ERR + 25 + 3 + read-write + + + + + PLC_CONF1 + 0x90 + 0x20 + 0xA0178A05 + + + BAD_CEF_ATTEN_PARA + 0 + 8 + read-write + + + BAD_CEF_ATTEN_PARA_SHIFT + 8 + 4 + read-write + + + BAD_OLA_WIN2_PARA_SHIFT + 12 + 4 + read-write + + + BAD_OLA_WIN2_PARA + 16 + 8 + read-write + + + SLIDE_WIN_LEN + 24 + 8 + read-write + + + + + PLC_CONF2 + 0x94 + 0x20 + 0x00000028 + + + CVSD_SEG_MOD + 0 + 2 + read-write + + + MIN_PERIOD + 2 + 5 + read-write + + + + + ESCO_CONF0 + 0x98 + 0x20 + + + ESCO_EN + 0 + 1 + read-write + + + ESCO_CHAN_MOD + 1 + 1 + read-write + + + ESCO_CVSD_DEC_PACK_ERR + 2 + 1 + read-write + + + ESCO_CVSD_PACK_LEN_8K + 3 + 5 + read-write + + + ESCO_CVSD_INF_EN + 8 + 1 + read-write + + + CVSD_DEC_START + 9 + 1 + read-write + + + CVSD_DEC_RESET + 10 + 1 + read-write + + + PLC_EN + 11 + 1 + read-write + + + PLC2DMA_EN + 12 + 1 + read-write + + + + + SCO_CONF0 + 0x9C + 0x20 + + + SCO_WITH_I2S_EN + 0 + 1 + read-write + + + SCO_NO_I2S_EN + 1 + 1 + read-write + + + CVSD_ENC_START + 2 + 1 + read-write + + + CVSD_ENC_RESET + 3 + 1 + read-write + + + + + CONF1 + 0xA0 + 0x20 + 0x00000089 + + + TX_PCM_CONF + 0 + 3 + read-write + + + TX_PCM_BYPASS + 3 + 1 + read-write + + + RX_PCM_CONF + 4 + 3 + read-write + + + RX_PCM_BYPASS + 7 + 1 + read-write + + + TX_STOP_EN + 8 + 1 + read-write + + + TX_ZEROS_RM_EN + 9 + 1 + read-write + + + + + PD_CONF + 0xA4 + 0x20 + 0x0000000A + + + FIFO_FORCE_PD + 0 + 1 + read-write + + + FIFO_FORCE_PU + 1 + 1 + read-write + + + PLC_MEM_FORCE_PD + 2 + 1 + read-write + + + PLC_MEM_FORCE_PU + 3 + 1 + read-write + + + + + CONF2 + 0xA8 + 0x20 + + + CAMERA_EN + 0 + 1 + read-write + + + LCD_TX_WRX2_EN + 1 + 1 + read-write + + + LCD_TX_SDX2_EN + 2 + 1 + read-write + + + DATA_ENABLE_TEST_EN + 3 + 1 + read-write + + + DATA_ENABLE + 4 + 1 + read-write + + + LCD_EN + 5 + 1 + read-write + + + EXT_ADC_START_EN + 6 + 1 + read-write + + + INTER_VALID_EN + 7 + 1 + read-write + + + + + CLKM_CONF + 0xAC + 0x20 + 0x00000004 + + + CLKM_DIV_NUM + 0 + 8 + read-write + + + CLKM_DIV_B + 8 + 6 + read-write + + + CLKM_DIV_A + 14 + 6 + read-write + + + CLK_EN + 20 + 1 + read-write + + + CLKA_ENA + 21 + 1 + read-write + + + + + SAMPLE_RATE_CONF + 0xB0 + 0x20 + 0x00410186 + + + TX_BCK_DIV_NUM + 0 + 6 + read-write + + + RX_BCK_DIV_NUM + 6 + 6 + read-write + + + TX_BITS_MOD + 12 + 6 + read-write + + + RX_BITS_MOD + 18 + 6 + read-write + + + + + PDM_CONF + 0xB4 + 0x20 + 0x01550020 + + + TX_PDM_EN + 0 + 1 + read-write + + + RX_PDM_EN + 1 + 1 + read-write + + + PCM2PDM_CONV_EN + 2 + 1 + read-write + + + PDM2PCM_CONV_EN + 3 + 1 + read-write + + + TX_PDM_SINC_OSR2 + 4 + 4 + read-write + + + TX_PDM_PRESCALE + 8 + 8 + read-write + + + TX_PDM_HP_IN_SHIFT + 16 + 2 + read-write + + + TX_PDM_LP_IN_SHIFT + 18 + 2 + read-write + + + TX_PDM_SINC_IN_SHIFT + 20 + 2 + read-write + + + TX_PDM_SIGMADELTA_IN_SHIFT + 22 + 2 + read-write + + + RX_PDM_SINC_DSR_16_EN + 24 + 1 + read-write + + + TX_PDM_HP_BYPASS + 25 + 1 + read-write + + + + + PDM_FREQ_CONF + 0xB8 + 0x20 + 0x000F01E0 + + + TX_PDM_FS + 0 + 10 + read-write + + + TX_PDM_FP + 10 + 10 + read-write + + + + + STATE + 0xBC + 0x20 + 0x00000007 + + + TX_IDLE + 0 + 1 + read-only + + + TX_FIFO_RESET_BACK + 1 + 1 + read-only + + + RX_FIFO_RESET_BACK + 2 + 1 + read-only + + + + + DATE + 0xFC + 0x20 + 0x01604201 + + + I2SDATE + 0 + 32 + read-write + + + + + + + I2S1 + I2S (Inter-IC Sound) Controller + 0x3FF6D000 + + I2S1 + 33 + + + + IO_MUX + Input/Output Multiplexer + IO_MUX + 0x3FF49000 + + 0x0 + 0x94 + registers + + + + PIN_CTRL + 0x0 + 0x20 + + + CLK1 + If you want to output clock for I2S0 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0x0; CLK_OUT2, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[11:8] = 0x0. If you want to output clock for I2S1 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0xF; CLK_OUT2, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[11:8] = 0x0. + 0 + 4 + read-write + + + CLK2 + If you want to output clock for I2S0 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0x0; CLK_OUT2, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[11:8] = 0x0. If you want to output clock for I2S1 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0xF; CLK_OUT2, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[11:8] = 0x0. + 4 + 4 + read-write + + + CLK3 + If you want to output clock for I2S0 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0x0; CLK_OUT2, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0x0 and PIN_CTRL[11:8] = 0x0. If you want to output clock for I2S1 to: CLK_OUT1, then set PIN_CTRL[3:0] = 0xF; CLK_OUT2, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[7:4] = 0x0; CLK_OUT3, then set PIN_CTRL[3:0] = 0xF and PIN_CTRL[11:8] = 0x0. + 8 + 4 + read-write + + + + + GPIO36 + 0x4 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO37 + 0x8 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO38 + 0xC + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO39 + 0x10 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO34 + 0x14 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO35 + 0x18 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO32 + 0x1C + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO33 + 0x20 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO25 + 0x24 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO26 + 0x28 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO27 + 0x2C + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO14 + 0x30 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO12 + 0x34 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO13 + 0x38 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO15 + 0x3C + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO2 + 0x40 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO0 + 0x44 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO4 + 0x48 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO16 + 0x4C + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO17 + 0x50 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO9 + 0x54 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO10 + 0x58 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO11 + 0x5C + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO6 + 0x60 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO7 + 0x64 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO8 + 0x68 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO5 + 0x6C + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO18 + 0x70 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO19 + 0x74 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO20 + 0x78 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO21 + 0x7C + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO22 + 0x80 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO3 + 0x84 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO1 + 0x88 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO23 + 0x8C + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + GPIO24 + 0x90 + 0x20 + + + MCU_OE + Output enable of the pad in sleep mode. 1: enable output; 0: disable output. + 0 + 1 + read-write + + + SLP_SEL + Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode. + 1 + 1 + read-write + + + MCU_WPD + Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled. + 2 + 1 + read-write + + + MCU_WPU + Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled. + 3 + 1 + read-write + + + MCU_IE + Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled. + 4 + 1 + read-write + + + MCU_DRV + Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength. + 5 + 2 + read-write + + + FUN_WPD + Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0. + 7 + 1 + read-write + + + FUN_WPU + Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0. + 8 + 1 + read-write + + + FUN_IE + Input enable of the pad. 1: input enabled; 0: input disabled. + 9 + 1 + read-write + + + FUN_DRV + Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet. + 10 + 2 + read-write + + + MCU_SEL + Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc. + 12 + 3 + read-write + + + + + + + LEDC + LED Control PWM (Pulse Width Modulation) + LEDC + 0x3FF59000 + + 0x0 + 0x198 + registers + + + LEDC + 43 + + + TIMER1 + 56 + + + TIMER2 + 57 + + + + 8 + 0x14 + 0-7 + HSCH%s_CONF0 + 0x0 + 0x20 + + + TIMER_SEL + There are four high speed timers the two bits are used to select one of them for high speed channel0. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3. + 0 + 2 + read-write + + + SIG_OUT_EN + This is the output enable control bit for high speed channel0 + 2 + 1 + read-write + + + IDLE_LV + This bit is used to control the output value when high speed channel0 is off. + 3 + 1 + read-write + + + + + 8 + 0x14 + 0-7 + HSCH%s_HPOINT + 0x4 + 0x20 + + + HPOINT + The output value changes to high when htimerx(x=[0 3]) selected by high speed channel0 has reached reg_hpoint_hsch0[19:0] + 0 + 20 + read-write + + + + + 8 + 0x14 + 0-7 + HSCH%s_DUTY + 0x8 + 0x20 + + + DUTY + This register represents the current duty of the output signal for high speed channel0. + 0 + 25 + read-write + + + + + 8 + 0x14 + 0-7 + HSCH%s_CONF1 + 0xC + 0x20 + 0x40000000 + + + DUTY_SCALE + This register controls the increase or decrease step scale for high speed channel0. + 0 + 10 + read-write + + + DUTY_CYCLE + This register is used to increase or decrease the duty every reg_duty_cycle_hsch0 cycles for high speed channel0. + 10 + 10 + read-write + + + DUTY_NUM + This register is used to control the num of increased or decreased times for high speed channel0. + 20 + 10 + read-write + + + DUTY_INC + This register is used to increase the duty of output signal or decrease the duty of output signal for high speed channel0. + 30 + 1 + read-write + + + DUTY_START + When reg_duty_num_hsch0 reg_duty_cycle_hsch0 and reg_duty_scale_hsch0 has been configured. these register won't take effect until set reg_duty_start_hsch0. this bit is automatically cleared by hardware. + 31 + 1 + read-write + + + + + 8 + 0x14 + 0-7 + HSCH%s_DUTY_R + 0x10 + 0x20 + + + DUTY_R + This register represents the current duty cycle of the output signal for high-speed channel %s + 0 + 25 + read-only + + + + + 8 + 0x14 + 0-7 + LSCH%s_CONF0 + 0xA0 + 0x20 + + + TIMER_SEL + There are four low speed timers the two bits are used to select one of them for low speed channel0. 2'b00: seletc lstimer0. 2'b01: select lstimer1. 2'b10: select lstimer2. 2'b11: select lstimer3. + 0 + 2 + read-write + + + SIG_OUT_EN + This is the output enable control bit for low speed channel0. + 2 + 1 + read-write + + + IDLE_LV + This bit is used to control the output value when low speed channel0 is off. + 3 + 1 + read-write + + + PARA_UP + This bit is used to update register LEDC_LSCH0_HPOINT and LEDC_LSCH0_DUTY for low speed channel0. + 4 + 1 + read-write + + + + + 8 + 0x14 + 0-7 + LSCH%s_HPOINT + 0xA4 + 0x20 + + + HPOINT + The output value changes to high when lstimerx(x=[0 3]) selected by low speed channel0 has reached reg_hpoint_lsch0[19:0] + 0 + 20 + read-write + + + + + 8 + 0x14 + 0-7 + LSCH%s_DUTY + 0xA8 + 0x20 + read-write + + + DUTY + This register represents the current duty of the output signal for low speed channel0. + 0 + 25 + read-write + + + + + 8 + 0x14 + 0-7 + LSCH%s_CONF1 + 0xAC + 0x20 + 0x40000000 + + + DUTY_SCALE + This register controls the increase or decrease step scale for low speed channel0. + 0 + 10 + read-write + + + DUTY_CYCLE + This register is used to increase or decrease the duty every reg_duty_cycle_lsch0 cycles for low speed channel0. + 10 + 10 + read-write + + + DUTY_NUM + This register is used to control the num of increased or decreased times for low speed channel6. + 20 + 10 + read-write + + + DUTY_INC + This register is used to increase the duty of output signal or decrease the duty of output signal for low speed channel6. + 30 + 1 + read-write + + + DUTY_START + When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1 has been configured. these register won't take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware. + 31 + 1 + read-write + + + + + 8 + 0x14 + 0-7 + LSCH%s_DUTY_R + 0xB0 + 0x20 + + + DUTY_R + This register represents the current duty cycle of the output signal for low-speed channel %s + 0 + 25 + read-only + + + + + 4 + 0x8 + 0-3 + HSTIMER%s_CONF + 0x140 + 0x20 + 0x01000000 + + + DUTY_RES + This register controls the range of the counter in high speed timer0. the counter range is [0 2**reg_hstimer0_lim] the max bit width for counter is 20. + 0 + 5 + read-write + + + DIV_NUM + This register is used to configure parameter for divider in high speed timer0 the least significant eight bits represent the decimal part. + 5 + 18 + read-write + + + PAUSE + This bit is used to pause the counter in high speed timer0 + 23 + 1 + read-write + + + RST + This bit is used to reset high speed timer0 the counter will be 0 after reset. + 24 + 1 + read-write + + + TICK_SEL + This bit is used to choose apb_clk or ref_tick for high speed timer0. 1'b1:apb_clk 0:ref_tick + 25 + 1 + read-write + + + LIM + 31 + 5 + read-write + + + + + 4 + 0x8 + 0-3 + HSTIMER%s_VALUE + 0x144 + 0x20 + + + CNT + software can read this register to get the current counter value in high speed timer0 + 0 + 20 + read-only + + + + + 4 + 0x8 + 0-3 + LSTIMER%s_CONF + 0x160 + 0x20 + 0x01000000 + + + DUTY_RES + This register controls the range of the counter in low speed timer0. the counter range is [0 2**reg_lstimer0_lim] the max bit width for counter is 20. + 0 + 5 + read-write + + + DIV_NUM + This register is used to configure parameter for divider in low speed timer0 the least significant eight bits represent the decimal part. + 5 + 18 + read-write + + + PAUSE + This bit is used to pause the counter in low speed timer0. + 23 + 1 + read-write + + + RST + This bit is used to reset low speed timer0 the counter will be 0 after reset. + 24 + 1 + read-write + + + TICK_SEL + This bit is used to choose slow_clk or ref_tick for low speed timer0. 1'b1:slow_clk 0:ref_tick + 25 + 1 + read-write + + + PARA_UP + Set this bit to update reg_div_num_lstime0 and reg_lstimer0_lim. + 26 + 1 + read-write + + + LIM + 31 + 5 + read-write + + + + + 4 + 0x8 + 0-3 + LSTIMER%s_VALUE + 0x164 + 0x20 + + + CNT + software can read this register to get the current counter value in low speed timer0. + 0 + 20 + read-only + + + + + INT_RAW + 0x180 + 0x20 + + + HSTIMER0_OVF_INT_RAW + The interrupt raw bit for high speed channel0 counter overflow. + 0 + 1 + read-only + + + HSTIMER1_OVF_INT_RAW + The interrupt raw bit for high speed channel1 counter overflow. + 1 + 1 + read-only + + + HSTIMER2_OVF_INT_RAW + The interrupt raw bit for high speed channel2 counter overflow. + 2 + 1 + read-only + + + HSTIMER3_OVF_INT_RAW + The interrupt raw bit for high speed channel3 counter overflow. + 3 + 1 + read-only + + + LSTIMER0_OVF_INT_RAW + The interrupt raw bit for low speed channel0 counter overflow. + 4 + 1 + read-only + + + LSTIMER1_OVF_INT_RAW + The interrupt raw bit for low speed channel1 counter overflow. + 5 + 1 + read-only + + + LSTIMER2_OVF_INT_RAW + The interrupt raw bit for low speed channel2 counter overflow. + 6 + 1 + read-only + + + LSTIMER3_OVF_INT_RAW + The interrupt raw bit for low speed channel3 counter overflow. + 7 + 1 + read-only + + + DUTY_CHNG_END_HSCH0_INT_RAW + The interrupt raw bit for high speed channel 0 duty change done. + 8 + 1 + read-only + + + DUTY_CHNG_END_HSCH1_INT_RAW + The interrupt raw bit for high speed channel 1 duty change done. + 9 + 1 + read-only + + + DUTY_CHNG_END_HSCH2_INT_RAW + The interrupt raw bit for high speed channel 2 duty change done. + 10 + 1 + read-only + + + DUTY_CHNG_END_HSCH3_INT_RAW + The interrupt raw bit for high speed channel 3 duty change done. + 11 + 1 + read-only + + + DUTY_CHNG_END_HSCH4_INT_RAW + The interrupt raw bit for high speed channel 4 duty change done. + 12 + 1 + read-only + + + DUTY_CHNG_END_HSCH5_INT_RAW + The interrupt raw bit for high speed channel 5 duty change done. + 13 + 1 + read-only + + + DUTY_CHNG_END_HSCH6_INT_RAW + The interrupt raw bit for high speed channel 6 duty change done. + 14 + 1 + read-only + + + DUTY_CHNG_END_HSCH7_INT_RAW + The interrupt raw bit for high speed channel 7 duty change done. + 15 + 1 + read-only + + + DUTY_CHNG_END_LSCH0_INT_RAW + The interrupt raw bit for low speed channel 0 duty change done. + 16 + 1 + read-only + + + DUTY_CHNG_END_LSCH1_INT_RAW + The interrupt raw bit for low speed channel 1 duty change done. + 17 + 1 + read-only + + + DUTY_CHNG_END_LSCH2_INT_RAW + The interrupt raw bit for low speed channel 2 duty change done. + 18 + 1 + read-only + + + DUTY_CHNG_END_LSCH3_INT_RAW + The interrupt raw bit for low speed channel 3 duty change done. + 19 + 1 + read-only + + + DUTY_CHNG_END_LSCH4_INT_RAW + The interrupt raw bit for low speed channel 4 duty change done. + 20 + 1 + read-only + + + DUTY_CHNG_END_LSCH5_INT_RAW + The interrupt raw bit for low speed channel 5 duty change done. + 21 + 1 + read-only + + + DUTY_CHNG_END_LSCH6_INT_RAW + The interrupt raw bit for low speed channel 6 duty change done. + 22 + 1 + read-only + + + DUTY_CHNG_END_LSCH7_INT_RAW + The interrupt raw bit for low speed channel 7 duty change done. + 23 + 1 + read-only + + + + + INT_ST + 0x184 + 0x20 + + + HSTIMER0_OVF_INT_ST + The interrupt status bit for high speed channel0 counter overflow event. + 0 + 1 + read-only + + + HSTIMER1_OVF_INT_ST + The interrupt status bit for high speed channel1 counter overflow event. + 1 + 1 + read-only + + + HSTIMER2_OVF_INT_ST + The interrupt status bit for high speed channel2 counter overflow event. + 2 + 1 + read-only + + + HSTIMER3_OVF_INT_ST + The interrupt status bit for high speed channel3 counter overflow event. + 3 + 1 + read-only + + + LSTIMER0_OVF_INT_ST + The interrupt status bit for low speed channel0 counter overflow event. + 4 + 1 + read-only + + + LSTIMER1_OVF_INT_ST + The interrupt status bit for low speed channel1 counter overflow event. + 5 + 1 + read-only + + + LSTIMER2_OVF_INT_ST + The interrupt status bit for low speed channel2 counter overflow event. + 6 + 1 + read-only + + + LSTIMER3_OVF_INT_ST + The interrupt status bit for low speed channel3 counter overflow event. + 7 + 1 + read-only + + + DUTY_CHNG_END_HSCH0_INT_ST + The interrupt status bit for high speed channel 0 duty change done event. + 8 + 1 + read-only + + + DUTY_CHNG_END_HSCH1_INT_ST + The interrupt status bit for high speed channel 1 duty change done event. + 9 + 1 + read-only + + + DUTY_CHNG_END_HSCH2_INT_ST + The interrupt status bit for high speed channel 2 duty change done event. + 10 + 1 + read-only + + + DUTY_CHNG_END_HSCH3_INT_ST + The interrupt status bit for high speed channel 3 duty change done event. + 11 + 1 + read-only + + + DUTY_CHNG_END_HSCH4_INT_ST + The interrupt status bit for high speed channel 4 duty change done event. + 12 + 1 + read-only + + + DUTY_CHNG_END_HSCH5_INT_ST + The interrupt status bit for high speed channel 5 duty change done event. + 13 + 1 + read-only + + + DUTY_CHNG_END_HSCH6_INT_ST + The interrupt status bit for high speed channel 6 duty change done event. + 14 + 1 + read-only + + + DUTY_CHNG_END_HSCH7_INT_ST + The interrupt status bit for high speed channel 7 duty change done event. + 15 + 1 + read-only + + + DUTY_CHNG_END_LSCH0_INT_ST + The interrupt status bit for low speed channel 0 duty change done event. + 16 + 1 + read-only + + + DUTY_CHNG_END_LSCH1_INT_ST + The interrupt status bit for low speed channel 1 duty change done event. + 17 + 1 + read-only + + + DUTY_CHNG_END_LSCH2_INT_ST + The interrupt status bit for low speed channel 2 duty change done event. + 18 + 1 + read-only + + + DUTY_CHNG_END_LSCH3_INT_ST + The interrupt status bit for low speed channel 3 duty change done event. + 19 + 1 + read-only + + + DUTY_CHNG_END_LSCH4_INT_ST + The interrupt status bit for low speed channel 4 duty change done event. + 20 + 1 + read-only + + + DUTY_CHNG_END_LSCH5_INT_ST + The interrupt status bit for low speed channel 5 duty change done event. + 21 + 1 + read-only + + + DUTY_CHNG_END_LSCH6_INT_ST + The interrupt status bit for low speed channel 6 duty change done event. + 22 + 1 + read-only + + + DUTY_CHNG_END_LSCH7_INT_ST + The interrupt status bit for low speed channel 7 duty change done event + 23 + 1 + read-only + + + + + INT_ENA + 0x188 + 0x20 + + + HSTIMER0_OVF_INT_ENA + The interrupt enable bit for high speed channel0 counter overflow interrupt. + 0 + 1 + read-write + + + HSTIMER1_OVF_INT_ENA + The interrupt enable bit for high speed channel1 counter overflow interrupt. + 1 + 1 + read-write + + + HSTIMER2_OVF_INT_ENA + The interrupt enable bit for high speed channel2 counter overflow interrupt. + 2 + 1 + read-write + + + HSTIMER3_OVF_INT_ENA + The interrupt enable bit for high speed channel3 counter overflow interrupt. + 3 + 1 + read-write + + + LSTIMER0_OVF_INT_ENA + The interrupt enable bit for low speed channel0 counter overflow interrupt. + 4 + 1 + read-write + + + LSTIMER1_OVF_INT_ENA + The interrupt enable bit for low speed channel1 counter overflow interrupt. + 5 + 1 + read-write + + + LSTIMER2_OVF_INT_ENA + The interrupt enable bit for low speed channel2 counter overflow interrupt. + 6 + 1 + read-write + + + LSTIMER3_OVF_INT_ENA + The interrupt enable bit for low speed channel3 counter overflow interrupt. + 7 + 1 + read-write + + + DUTY_CHNG_END_HSCH0_INT_ENA + The interrupt enable bit for high speed channel 0 duty change done interrupt. + 8 + 1 + read-write + + + DUTY_CHNG_END_HSCH1_INT_ENA + The interrupt enable bit for high speed channel 1 duty change done interrupt. + 9 + 1 + read-write + + + DUTY_CHNG_END_HSCH2_INT_ENA + The interrupt enable bit for high speed channel 2 duty change done interrupt. + 10 + 1 + read-write + + + DUTY_CHNG_END_HSCH3_INT_ENA + The interrupt enable bit for high speed channel 3 duty change done interrupt. + 11 + 1 + read-write + + + DUTY_CHNG_END_HSCH4_INT_ENA + The interrupt enable bit for high speed channel 4 duty change done interrupt. + 12 + 1 + read-write + + + DUTY_CHNG_END_HSCH5_INT_ENA + The interrupt enable bit for high speed channel 5 duty change done interrupt. + 13 + 1 + read-write + + + DUTY_CHNG_END_HSCH6_INT_ENA + The interrupt enable bit for high speed channel 6 duty change done interrupt. + 14 + 1 + read-write + + + DUTY_CHNG_END_HSCH7_INT_ENA + The interrupt enable bit for high speed channel 7 duty change done interrupt. + 15 + 1 + read-write + + + DUTY_CHNG_END_LSCH0_INT_ENA + The interrupt enable bit for low speed channel 0 duty change done interrupt. + 16 + 1 + read-write + + + DUTY_CHNG_END_LSCH1_INT_ENA + The interrupt enable bit for low speed channel 1 duty change done interrupt. + 17 + 1 + read-write + + + DUTY_CHNG_END_LSCH2_INT_ENA + The interrupt enable bit for low speed channel 2 duty change done interrupt. + 18 + 1 + read-write + + + DUTY_CHNG_END_LSCH3_INT_ENA + The interrupt enable bit for low speed channel 3 duty change done interrupt. + 19 + 1 + read-write + + + DUTY_CHNG_END_LSCH4_INT_ENA + The interrupt enable bit for low speed channel 4 duty change done interrupt. + 20 + 1 + read-write + + + DUTY_CHNG_END_LSCH5_INT_ENA + The interrupt enable bit for low speed channel 5 duty change done interrupt. + 21 + 1 + read-write + + + DUTY_CHNG_END_LSCH6_INT_ENA + The interrupt enable bit for low speed channel 6 duty change done interrupt. + 22 + 1 + read-write + + + DUTY_CHNG_END_LSCH7_INT_ENA + The interrupt enable bit for low speed channel 7 duty change done interrupt. + 23 + 1 + read-write + + + + + INT_CLR + 0x18C + 0x20 + + + HSTIMER0_OVF_INT_CLR + Set this bit to clear high speed channel0 counter overflow interrupt. + 0 + 1 + write-only + + + HSTIMER1_OVF_INT_CLR + Set this bit to clear high speed channel1 counter overflow interrupt. + 1 + 1 + write-only + + + HSTIMER2_OVF_INT_CLR + Set this bit to clear high speed channel2 counter overflow interrupt. + 2 + 1 + write-only + + + HSTIMER3_OVF_INT_CLR + Set this bit to clear high speed channel3 counter overflow interrupt. + 3 + 1 + write-only + + + LSTIMER0_OVF_INT_CLR + Set this bit to clear low speed channel0 counter overflow interrupt. + 4 + 1 + write-only + + + LSTIMER1_OVF_INT_CLR + Set this bit to clear low speed channel1 counter overflow interrupt. + 5 + 1 + write-only + + + LSTIMER2_OVF_INT_CLR + Set this bit to clear low speed channel2 counter overflow interrupt. + 6 + 1 + write-only + + + LSTIMER3_OVF_INT_CLR + Set this bit to clear low speed channel3 counter overflow interrupt. + 7 + 1 + write-only + + + DUTY_CHNG_END_HSCH0_INT_CLR + Set this bit to clear high speed channel 0 duty change done interrupt. + 8 + 1 + write-only + + + DUTY_CHNG_END_HSCH1_INT_CLR + Set this bit to clear high speed channel 1 duty change done interrupt. + 9 + 1 + write-only + + + DUTY_CHNG_END_HSCH2_INT_CLR + Set this bit to clear high speed channel 2 duty change done interrupt. + 10 + 1 + write-only + + + DUTY_CHNG_END_HSCH3_INT_CLR + Set this bit to clear high speed channel 3 duty change done interrupt. + 11 + 1 + write-only + + + DUTY_CHNG_END_HSCH4_INT_CLR + Set this bit to clear high speed channel 4 duty change done interrupt. + 12 + 1 + write-only + + + DUTY_CHNG_END_HSCH5_INT_CLR + Set this bit to clear high speed channel 5 duty change done interrupt. + 13 + 1 + write-only + + + DUTY_CHNG_END_HSCH6_INT_CLR + Set this bit to clear high speed channel 6 duty change done interrupt. + 14 + 1 + write-only + + + DUTY_CHNG_END_HSCH7_INT_CLR + Set this bit to clear high speed channel 7 duty change done interrupt. + 15 + 1 + write-only + + + DUTY_CHNG_END_LSCH0_INT_CLR + Set this bit to clear low speed channel 0 duty change done interrupt. + 16 + 1 + write-only + + + DUTY_CHNG_END_LSCH1_INT_CLR + Set this bit to clear low speed channel 1 duty change done interrupt. + 17 + 1 + write-only + + + DUTY_CHNG_END_LSCH2_INT_CLR + Set this bit to clear low speed channel 2 duty change done interrupt. + 18 + 1 + write-only + + + DUTY_CHNG_END_LSCH3_INT_CLR + Set this bit to clear low speed channel 3 duty change done interrupt. + 19 + 1 + write-only + + + DUTY_CHNG_END_LSCH4_INT_CLR + Set this bit to clear low speed channel 4 duty change done interrupt. + 20 + 1 + write-only + + + DUTY_CHNG_END_LSCH5_INT_CLR + Set this bit to clear low speed channel 5 duty change done interrupt. + 21 + 1 + write-only + + + DUTY_CHNG_END_LSCH6_INT_CLR + Set this bit to clear low speed channel 6 duty change done interrupt. + 22 + 1 + write-only + + + DUTY_CHNG_END_LSCH7_INT_CLR + Set this bit to clear low speed channel 7 duty change done interrupt. + 23 + 1 + write-only + + + + + CONF + 0x190 + 0x20 + + + APB_CLK_SEL + This bit is used to set the frequency of slow_clk. 1'b1:80mhz 1'b0:8mhz + 0 + 1 + read-write + + + + + DATE + 0x1FC + 0x20 + 0x16031700 + + + DATE + This register represents the version . + 0 + 32 + read-write + + + + + + + PWM0 + Motor Control Pulse-Width Modulation + MCPWM + 0x3FF5E000 + + 0x0 + 0x128 + registers + + + PWM0 + 39 + + + + CLK_CFG + 0x0 + 0x20 + + + CLK_PRESCALE + 0 + 8 + read-write + + + + + TIMER0_CFG0 + 0x4 + 0x20 + 0x0000FF00 + + + TIMER0_PRESCALE + 0 + 8 + read-write + + + TIMER0_PERIOD + 8 + 16 + read-write + + + TIMER0_PERIOD_UPMETHOD + 24 + 2 + read-write + + + + + TIMER0_CFG1 + 0x8 + 0x20 + + + TIMER0_START + 0 + 3 + read-write + + + TIMER0_MOD + 3 + 2 + read-write + + + + + TIMER0_SYNC + 0xC + 0x20 + + + TIMER0_SYNCI_EN + 0 + 1 + read-write + + + SW + 1 + 1 + read-write + + + TIMER0_SYNCO_SEL + 2 + 2 + read-write + + + TIMER0_PHASE + 4 + 16 + read-write + + + TIMER0_PHASE_DIRECTION + 20 + 1 + read-write + + + + + TIMER0_STATUS + 0x10 + 0x20 + + + TIMER0_VALUE + 0 + 16 + read-only + + + TIMER0_DIRECTION + 16 + 1 + read-only + + + + + TIMER1_CFG0 + 0x14 + 0x20 + 0x0000FF00 + + + TIMER1_PRESCALE + 0 + 8 + read-write + + + TIMER1_PERIOD + 8 + 16 + read-write + + + TIMER1_PERIOD_UPMETHOD + 24 + 2 + read-write + + + + + TIMER1_CFG1 + 0x18 + 0x20 + + + TIMER1_START + 0 + 3 + read-write + + + TIMER1_MOD + 3 + 2 + read-write + + + + + TIMER1_SYNC + 0x1C + 0x20 + + + TIMER1_SYNCI_EN + 0 + 1 + read-write + + + SW + 1 + 1 + read-write + + + TIMER1_SYNCO_SEL + 2 + 2 + read-write + + + TIMER1_PHASE + 4 + 16 + read-write + + + TIMER1_PHASE_DIRECTION + 20 + 1 + read-write + + + + + TIMER1_STATUS + 0x20 + 0x20 + + + TIMER1_VALUE + 0 + 16 + read-only + + + TIMER1_DIRECTION + 16 + 1 + read-only + + + + + TIMER2_CFG0 + 0x24 + 0x20 + 0x0000FF00 + + + TIMER2_PRESCALE + 0 + 8 + read-write + + + TIMER2_PERIOD + 8 + 16 + read-write + + + TIMER2_PERIOD_UPMETHOD + 24 + 2 + read-write + + + + + TIMER2_CFG1 + 0x28 + 0x20 + + + TIMER2_START + 0 + 3 + read-write + + + TIMER2_MOD + 3 + 2 + read-write + + + + + TIMER2_SYNC + 0x2C + 0x20 + + + TIMER2_SYNCI_EN + 0 + 1 + read-write + + + SW + 1 + 1 + read-write + + + TIMER2_SYNCO_SEL + 2 + 2 + read-write + + + TIMER2_PHASE + 4 + 16 + read-write + + + TIMER2_PHASE_DIRECTION + 20 + 1 + read-write + + + + + TIMER2_STATUS + 0x30 + 0x20 + + + TIMER2_VALUE + 0 + 16 + read-only + + + TIMER2_DIRECTION + 16 + 1 + read-only + + + + + TIMER_SYNCI_CFG + 0x34 + 0x20 + + + TIMER0_SYNCISEL + 0 + 3 + read-write + + + TIMER1_SYNCISEL + 3 + 3 + read-write + + + TIMER2_SYNCISEL + 6 + 3 + read-write + + + EXTERNAL_SYNCI0_INVERT + 9 + 1 + read-write + + + EXTERNAL_SYNCI1_INVERT + 10 + 1 + read-write + + + EXTERNAL_SYNCI2_INVERT + 11 + 1 + read-write + + + + + OPERATOR_TIMERSEL + 0x38 + 0x20 + + + OPERATOR0_TIMERSEL + 0 + 2 + read-write + + + OPERATOR1_TIMERSEL + 2 + 2 + read-write + + + OPERATOR2_TIMERSEL + 4 + 2 + read-write + + + + + GEN0_STMP_CFG + 0x3C + 0x20 + + + GEN0_A_UPMETHOD + 0 + 4 + read-write + + + GEN0_B_UPMETHOD + 4 + 4 + read-write + + + GEN0_A_SHDW_FULL + 8 + 1 + read-write + + + GEN0_B_SHDW_FULL + 9 + 1 + read-write + + + + + GEN0_TSTMP_A + 0x40 + 0x20 + + + GEN0_A + 0 + 16 + read-write + + + + + GEN0_TSTMP_B + 0x44 + 0x20 + + + GEN0_B + 0 + 16 + read-write + + + + + GEN0_CFG0 + 0x48 + 0x20 + + + GEN0_CFG_UPMETHOD + 0 + 4 + read-write + + + GEN0_T0_SEL + 4 + 3 + read-write + + + GEN0_T1_SEL + 7 + 3 + read-write + + + + + GEN0_FORCE + 0x4C + 0x20 + 0x00000020 + + + GEN0_CNTUFORCE_UPMETHOD + 0 + 6 + read-write + + + GEN0_A_CNTUFORCE_MODE + 6 + 2 + read-write + + + GEN0_B_CNTUFORCE_MODE + 8 + 2 + read-write + + + GEN0_A_NCIFORCE + 10 + 1 + read-write + + + GEN0_A_NCIFORCE_MODE + 11 + 2 + read-write + + + GEN0_B_NCIFORCE + 13 + 1 + read-write + + + GEN0_B_NCIFORCE_MODE + 14 + 2 + read-write + + + + + GEN0_A + 0x50 + 0x20 + + + UTEZ + 0 + 2 + read-write + + + UTEP + 2 + 2 + read-write + + + UTEA + 4 + 2 + read-write + + + UTEB + 6 + 2 + read-write + + + UT0 + 8 + 2 + read-write + + + UT1 + 10 + 2 + read-write + + + DTEZ + 12 + 2 + read-write + + + DTEP + 14 + 2 + read-write + + + DTEA + 16 + 2 + read-write + + + DTEB + 18 + 2 + read-write + + + DT0 + 20 + 2 + read-write + + + DT1 + 22 + 2 + read-write + + + + + GEN0_B + 0x54 + 0x20 + + + UTEZ + 0 + 2 + read-write + + + UTEP + 2 + 2 + read-write + + + UTEA + 4 + 2 + read-write + + + UTEB + 6 + 2 + read-write + + + UT0 + 8 + 2 + read-write + + + UT1 + 10 + 2 + read-write + + + DTEZ + 12 + 2 + read-write + + + DTEP + 14 + 2 + read-write + + + DTEA + 16 + 2 + read-write + + + DTEB + 18 + 2 + read-write + + + DT0 + 20 + 2 + read-write + + + DT1 + 22 + 2 + read-write + + + + + DT0_CFG + 0x58 + 0x20 + 0x00018000 + + + DT0_FED_UPMETHOD + 0 + 4 + read-write + + + DT0_RED_UPMETHOD + 4 + 4 + read-write + + + DT0_DEB_MODE + 8 + 1 + read-write + + + DT0_A_OUTSWAP + 9 + 1 + read-write + + + DT0_B_OUTSWAP + 10 + 1 + read-write + + + DT0_RED_INSEL + 11 + 1 + read-write + + + DT0_FED_INSEL + 12 + 1 + read-write + + + DT0_RED_OUTINVERT + 13 + 1 + read-write + + + DT0_FED_OUTINVERT + 14 + 1 + read-write + + + DT0_A_OUTBYPASS + 15 + 1 + read-write + + + DT0_B_OUTBYPASS + 16 + 1 + read-write + + + DT0_CLK_SEL + 17 + 1 + read-write + + + + + DT0_FED_CFG + 0x5C + 0x20 + + + DT0_FED + 0 + 16 + read-write + + + + + DT0_RED_CFG + 0x60 + 0x20 + + + DT0_RED + 0 + 16 + read-write + + + + + CARRIER0_CFG + 0x64 + 0x20 + + + CARRIER0_EN + 0 + 1 + read-write + + + CARRIER0_PRESCALE + 1 + 4 + read-write + + + CARRIER0_DUTY + 5 + 3 + read-write + + + CARRIER0_OSHTWTH + 8 + 4 + read-write + + + CARRIER0_OUT_INVERT + 12 + 1 + read-write + + + CARRIER0_IN_INVERT + 13 + 1 + read-write + + + + + FH0_CFG0 + 0x68 + 0x20 + + + FH0_SW_CBC + 0 + 1 + read-write + + + FH0_F2_CBC + 1 + 1 + read-write + + + FH0_F1_CBC + 2 + 1 + read-write + + + FH0_F0_CBC + 3 + 1 + read-write + + + FH0_SW_OST + 4 + 1 + read-write + + + FH0_F2_OST + 5 + 1 + read-write + + + FH0_F1_OST + 6 + 1 + read-write + + + FH0_F0_OST + 7 + 1 + read-write + + + FH0_A_CBC_D + 8 + 2 + read-write + + + FH0_A_CBC_U + 10 + 2 + read-write + + + FH0_A_OST_D + 12 + 2 + read-write + + + FH0_A_OST_U + 14 + 2 + read-write + + + FH0_B_CBC_D + 16 + 2 + read-write + + + FH0_B_CBC_U + 18 + 2 + read-write + + + FH0_B_OST_D + 20 + 2 + read-write + + + FH0_B_OST_U + 22 + 2 + read-write + + + + + FH0_CFG1 + 0x6C + 0x20 + + + FH0_CLR_OST + 0 + 1 + read-write + + + FH0_CBCPULSE + 1 + 2 + read-write + + + FH0_FORCE_CBC + 3 + 1 + read-write + + + FH0_FORCE_OST + 4 + 1 + read-write + + + + + FH0_STATUS + 0x70 + 0x20 + + + FH0_CBC_ON + 0 + 1 + read-only + + + FH0_OST_ON + 1 + 1 + read-only + + + + + GEN1_STMP_CFG + 0x74 + 0x20 + + + GEN1_A_UPMETHOD + 0 + 4 + read-write + + + GEN1_B_UPMETHOD + 4 + 4 + read-write + + + GEN1_A_SHDW_FULL + 8 + 1 + read-write + + + GEN1_B_SHDW_FULL + 9 + 1 + read-write + + + + + GEN1_TSTMP_A + 0x78 + 0x20 + + + GEN1_A + 0 + 16 + read-write + + + + + GEN1_TSTMP_B + 0x7C + 0x20 + + + GEN1_B + 0 + 16 + read-write + + + + + GEN1_CFG0 + 0x80 + 0x20 + + + GEN1_CFG_UPMETHOD + 0 + 4 + read-write + + + GEN1_T0_SEL + 4 + 3 + read-write + + + GEN1_T1_SEL + 7 + 3 + read-write + + + + + GEN1_FORCE + 0x84 + 0x20 + 0x00000020 + + + GEN1_CNTUFORCE_UPMETHOD + 0 + 6 + read-write + + + GEN1_A_CNTUFORCE_MODE + 6 + 2 + read-write + + + GEN1_B_CNTUFORCE_MODE + 8 + 2 + read-write + + + GEN1_A_NCIFORCE + 10 + 1 + read-write + + + GEN1_A_NCIFORCE_MODE + 11 + 2 + read-write + + + GEN1_B_NCIFORCE + 13 + 1 + read-write + + + GEN1_B_NCIFORCE_MODE + 14 + 2 + read-write + + + + + GEN1_A + 0x88 + 0x20 + + + UTEZ + 0 + 2 + read-write + + + UTEP + 2 + 2 + read-write + + + UTEA + 4 + 2 + read-write + + + UTEB + 6 + 2 + read-write + + + UT0 + 8 + 2 + read-write + + + UT1 + 10 + 2 + read-write + + + DTEZ + 12 + 2 + read-write + + + DTEP + 14 + 2 + read-write + + + DTEA + 16 + 2 + read-write + + + DTEB + 18 + 2 + read-write + + + DT0 + 20 + 2 + read-write + + + DT1 + 22 + 2 + read-write + + + + + GEN1_B + 0x8C + 0x20 + + + UTEZ + 0 + 2 + read-write + + + UTEP + 2 + 2 + read-write + + + UTEA + 4 + 2 + read-write + + + UTEB + 6 + 2 + read-write + + + UT0 + 8 + 2 + read-write + + + UT1 + 10 + 2 + read-write + + + DTEZ + 12 + 2 + read-write + + + DTEP + 14 + 2 + read-write + + + DTEA + 16 + 2 + read-write + + + DTEB + 18 + 2 + read-write + + + DT0 + 20 + 2 + read-write + + + DT1 + 22 + 2 + read-write + + + + + DT1_CFG + 0x90 + 0x20 + 0x00018000 + + + DT1_FED_UPMETHOD + 0 + 4 + read-write + + + DT1_RED_UPMETHOD + 4 + 4 + read-write + + + DT1_DEB_MODE + 8 + 1 + read-write + + + DT1_A_OUTSWAP + 9 + 1 + read-write + + + DT1_B_OUTSWAP + 10 + 1 + read-write + + + DT1_RED_INSEL + 11 + 1 + read-write + + + DT1_FED_INSEL + 12 + 1 + read-write + + + DT1_RED_OUTINVERT + 13 + 1 + read-write + + + DT1_FED_OUTINVERT + 14 + 1 + read-write + + + DT1_A_OUTBYPASS + 15 + 1 + read-write + + + DT1_B_OUTBYPASS + 16 + 1 + read-write + + + DT1_CLK_SEL + 17 + 1 + read-write + + + + + DT1_FED_CFG + 0x94 + 0x20 + + + DT1_FED + 0 + 16 + read-write + + + + + DT1_RED_CFG + 0x98 + 0x20 + + + DT1_RED + 0 + 16 + read-write + + + + + CARRIER1_CFG + 0x9C + 0x20 + + + CARRIER1_EN + 0 + 1 + read-write + + + CARRIER1_PRESCALE + 1 + 4 + read-write + + + CARRIER1_DUTY + 5 + 3 + read-write + + + CARRIER1_OSHTWTH + 8 + 4 + read-write + + + CARRIER1_OUT_INVERT + 12 + 1 + read-write + + + CARRIER1_IN_INVERT + 13 + 1 + read-write + + + + + FH1_CFG0 + 0xA0 + 0x20 + + + FH1_SW_CBC + 0 + 1 + read-write + + + FH1_F2_CBC + 1 + 1 + read-write + + + FH1_F1_CBC + 2 + 1 + read-write + + + FH1_F0_CBC + 3 + 1 + read-write + + + FH1_SW_OST + 4 + 1 + read-write + + + FH1_F2_OST + 5 + 1 + read-write + + + FH1_F1_OST + 6 + 1 + read-write + + + FH1_F0_OST + 7 + 1 + read-write + + + FH1_A_CBC_D + 8 + 2 + read-write + + + FH1_A_CBC_U + 10 + 2 + read-write + + + FH1_A_OST_D + 12 + 2 + read-write + + + FH1_A_OST_U + 14 + 2 + read-write + + + FH1_B_CBC_D + 16 + 2 + read-write + + + FH1_B_CBC_U + 18 + 2 + read-write + + + FH1_B_OST_D + 20 + 2 + read-write + + + FH1_B_OST_U + 22 + 2 + read-write + + + + + FH1_CFG1 + 0xA4 + 0x20 + + + FH1_CLR_OST + 0 + 1 + read-write + + + FH1_CBCPULSE + 1 + 2 + read-write + + + FH1_FORCE_CBC + 3 + 1 + read-write + + + FH1_FORCE_OST + 4 + 1 + read-write + + + + + FH1_STATUS + 0xA8 + 0x20 + + + FH1_CBC_ON + 0 + 1 + read-only + + + FH1_OST_ON + 1 + 1 + read-only + + + + + GEN2_STMP_CFG + 0xAC + 0x20 + + + GEN2_A_UPMETHOD + 0 + 4 + read-write + + + GEN2_B_UPMETHOD + 4 + 4 + read-write + + + GEN2_A_SHDW_FULL + 8 + 1 + read-write + + + GEN2_B_SHDW_FULL + 9 + 1 + read-write + + + + + GEN2_TSTMP_A + 0xB0 + 0x20 + + + GEN2_A + 0 + 16 + read-write + + + + + GEN2_TSTMP_B + 0xB4 + 0x20 + + + GEN2_B + 0 + 16 + read-write + + + + + GEN2_CFG0 + 0xB8 + 0x20 + + + GEN2_CFG_UPMETHOD + 0 + 4 + read-write + + + GEN2_T0_SEL + 4 + 3 + read-write + + + GEN2_T1_SEL + 7 + 3 + read-write + + + + + GEN2_FORCE + 0xBC + 0x20 + 0x00000020 + + + GEN2_CNTUFORCE_UPMETHOD + 0 + 6 + read-write + + + GEN2_A_CNTUFORCE_MODE + 6 + 2 + read-write + + + GEN2_B_CNTUFORCE_MODE + 8 + 2 + read-write + + + GEN2_A_NCIFORCE + 10 + 1 + read-write + + + GEN2_A_NCIFORCE_MODE + 11 + 2 + read-write + + + GEN2_B_NCIFORCE + 13 + 1 + read-write + + + GEN2_B_NCIFORCE_MODE + 14 + 2 + read-write + + + + + GEN2_A + 0xC0 + 0x20 + + + UTEZ + 0 + 2 + read-write + + + UTEP + 2 + 2 + read-write + + + UTEA + 4 + 2 + read-write + + + UTEB + 6 + 2 + read-write + + + UT0 + 8 + 2 + read-write + + + UT1 + 10 + 2 + read-write + + + DTEZ + 12 + 2 + read-write + + + DTEP + 14 + 2 + read-write + + + DTEA + 16 + 2 + read-write + + + DTEB + 18 + 2 + read-write + + + DT0 + 20 + 2 + read-write + + + DT1 + 22 + 2 + read-write + + + + + GEN2_B + 0xC4 + 0x20 + + + UTEZ + 0 + 2 + read-write + + + UTEP + 2 + 2 + read-write + + + UTEA + 4 + 2 + read-write + + + UTEB + 6 + 2 + read-write + + + UT0 + 8 + 2 + read-write + + + UT1 + 10 + 2 + read-write + + + DTEZ + 12 + 2 + read-write + + + DTEP + 14 + 2 + read-write + + + DTEA + 16 + 2 + read-write + + + DTEB + 18 + 2 + read-write + + + DT0 + 20 + 2 + read-write + + + DT1 + 22 + 2 + read-write + + + + + DT2_CFG + 0xC8 + 0x20 + 0x00018000 + + + DT2_FED_UPMETHOD + 0 + 4 + read-write + + + DT2_RED_UPMETHOD + 4 + 4 + read-write + + + DT2_DEB_MODE + 8 + 1 + read-write + + + DT2_A_OUTSWAP + 9 + 1 + read-write + + + DT2_B_OUTSWAP + 10 + 1 + read-write + + + DT2_RED_INSEL + 11 + 1 + read-write + + + DT2_FED_INSEL + 12 + 1 + read-write + + + DT2_RED_OUTINVERT + 13 + 1 + read-write + + + DT2_FED_OUTINVERT + 14 + 1 + read-write + + + DT2_A_OUTBYPASS + 15 + 1 + read-write + + + DT2_B_OUTBYPASS + 16 + 1 + read-write + + + DT2_CLK_SEL + 17 + 1 + read-write + + + + + DT2_FED_CFG + 0xCC + 0x20 + + + DT2_FED + 0 + 16 + read-write + + + + + DT2_RED_CFG + 0xD0 + 0x20 + + + DT2_RED + 0 + 16 + read-write + + + + + CARRIER2_CFG + 0xD4 + 0x20 + + + CARRIER2_EN + 0 + 1 + read-write + + + CARRIER2_PRESCALE + 1 + 4 + read-write + + + CARRIER2_DUTY + 5 + 3 + read-write + + + CARRIER2_OSHTWTH + 8 + 4 + read-write + + + CARRIER2_OUT_INVERT + 12 + 1 + read-write + + + CARRIER2_IN_INVERT + 13 + 1 + read-write + + + + + FH2_CFG0 + 0xD8 + 0x20 + + + FH2_SW_CBC + 0 + 1 + read-write + + + FH2_F2_CBC + 1 + 1 + read-write + + + FH2_F1_CBC + 2 + 1 + read-write + + + FH2_F0_CBC + 3 + 1 + read-write + + + FH2_SW_OST + 4 + 1 + read-write + + + FH2_F2_OST + 5 + 1 + read-write + + + FH2_F1_OST + 6 + 1 + read-write + + + FH2_F0_OST + 7 + 1 + read-write + + + FH2_A_CBC_D + 8 + 2 + read-write + + + FH2_A_CBC_U + 10 + 2 + read-write + + + FH2_A_OST_D + 12 + 2 + read-write + + + FH2_A_OST_U + 14 + 2 + read-write + + + FH2_B_CBC_D + 16 + 2 + read-write + + + FH2_B_CBC_U + 18 + 2 + read-write + + + FH2_B_OST_D + 20 + 2 + read-write + + + FH2_B_OST_U + 22 + 2 + read-write + + + + + FH2_CFG1 + 0xDC + 0x20 + + + FH2_CLR_OST + 0 + 1 + read-write + + + FH2_CBCPULSE + 1 + 2 + read-write + + + FH2_FORCE_CBC + 3 + 1 + read-write + + + FH2_FORCE_OST + 4 + 1 + read-write + + + + + FH2_STATUS + 0xE0 + 0x20 + + + FH2_CBC_ON + 0 + 1 + read-only + + + FH2_OST_ON + 1 + 1 + read-only + + + + + FAULT_DETECT + 0xE4 + 0x20 + + + F0_EN + 0 + 1 + read-write + + + F1_EN + 1 + 1 + read-write + + + F2_EN + 2 + 1 + read-write + + + F0_POLE + 3 + 1 + read-write + + + F1_POLE + 4 + 1 + read-write + + + F2_POLE + 5 + 1 + read-write + + + EVENT_F0 + 6 + 1 + read-only + + + EVENT_F1 + 7 + 1 + read-only + + + EVENT_F2 + 8 + 1 + read-only + + + + + CAP_TIMER_CFG + 0xE8 + 0x20 + + + CAP_TIMER_EN + 0 + 1 + read-write + + + CAP_SYNCI_EN + 1 + 1 + read-write + + + CAP_SYNCI_SEL + 2 + 3 + read-write + + + CAP_SYNC_SW + 5 + 1 + write-only + + + + + CAP_TIMER_PHASE + 0xEC + 0x20 + + + CAP_TIMER_PHASE + 0 + 32 + read-write + + + + + CAP_CH0_CFG + 0xF0 + 0x20 + + + CAP0_EN + 0 + 1 + read-write + + + CAP0_MODE + 1 + 2 + read-write + + + CAP0_PRESCALE + 3 + 8 + read-write + + + CAP0_IN_INVERT + 11 + 1 + read-write + + + CAP0_SW + 12 + 1 + write-only + + + + + CAP_CH1_CFG + 0xF4 + 0x20 + + + CAP1_EN + 0 + 1 + read-write + + + CAP1_MODE + 1 + 2 + read-write + + + CAP1_PRESCALE + 3 + 8 + read-write + + + CAP1_IN_INVERT + 11 + 1 + read-write + + + CAP1_SW + 12 + 1 + write-only + + + + + CAP_CH2_CFG + 0xF8 + 0x20 + + + CAP2_EN + 0 + 1 + read-write + + + CAP2_MODE + 1 + 2 + read-write + + + CAP2_PRESCALE + 3 + 8 + read-write + + + CAP2_IN_INVERT + 11 + 1 + read-write + + + CAP2_SW + 12 + 1 + write-only + + + + + CAP_CH0 + 0xFC + 0x20 + + + CAP0_VALUE + 0 + 32 + read-only + + + + + CAP_CH1 + 0x100 + 0x20 + + + CAP1_VALUE + 0 + 32 + read-only + + + + + CAP_CH2 + 0x104 + 0x20 + + + CAP2_VALUE + 0 + 32 + read-only + + + + + CAP_STATUS + 0x108 + 0x20 + + + CAP0_EDGE + 0 + 1 + read-only + + + CAP1_EDGE + 1 + 1 + read-only + + + CAP2_EDGE + 2 + 1 + read-only + + + + + UPDATE_CFG + 0x10C + 0x20 + 0x00000055 + + + GLOBAL_UP_EN + 0 + 1 + read-write + + + GLOBAL_FORCE_UP + 1 + 1 + read-write + + + OP0_UP_EN + 2 + 1 + read-write + + + OP0_FORCE_UP + 3 + 1 + read-write + + + OP1_UP_EN + 4 + 1 + read-write + + + OP1_FORCE_UP + 5 + 1 + read-write + + + OP2_UP_EN + 6 + 1 + read-write + + + OP2_FORCE_UP + 7 + 1 + read-write + + + + + INT_ENA + 0x110 + 0x20 + + + TIMER0_STOP_INT_ENA + 0 + 1 + read-write + + + TIMER1_STOP_INT_ENA + 1 + 1 + read-write + + + TIMER2_STOP_INT_ENA + 2 + 1 + read-write + + + TIMER0_TEZ_INT_ENA + 3 + 1 + read-write + + + TIMER1_TEZ_INT_ENA + 4 + 1 + read-write + + + TIMER2_TEZ_INT_ENA + 5 + 1 + read-write + + + TIMER0_TEP_INT_ENA + 6 + 1 + read-write + + + TIMER1_TEP_INT_ENA + 7 + 1 + read-write + + + TIMER2_TEP_INT_ENA + 8 + 1 + read-write + + + FAULT0_INT_ENA + 9 + 1 + read-write + + + FAULT1_INT_ENA + 10 + 1 + read-write + + + FAULT2_INT_ENA + 11 + 1 + read-write + + + FAULT0_CLR_INT_ENA + 12 + 1 + read-write + + + FAULT1_CLR_INT_ENA + 13 + 1 + read-write + + + FAULT2_CLR_INT_ENA + 14 + 1 + read-write + + + OP0_TEA_INT_ENA + 15 + 1 + read-write + + + OP1_TEA_INT_ENA + 16 + 1 + read-write + + + OP2_TEA_INT_ENA + 17 + 1 + read-write + + + OP0_TEB_INT_ENA + 18 + 1 + read-write + + + OP1_TEB_INT_ENA + 19 + 1 + read-write + + + OP2_TEB_INT_ENA + 20 + 1 + read-write + + + FH0_CBC_INT_ENA + 21 + 1 + read-write + + + FH1_CBC_INT_ENA + 22 + 1 + read-write + + + FH2_CBC_INT_ENA + 23 + 1 + read-write + + + FH0_OST_INT_ENA + 24 + 1 + read-write + + + FH1_OST_INT_ENA + 25 + 1 + read-write + + + FH2_OST_INT_ENA + 26 + 1 + read-write + + + CAP0_INT_ENA + 27 + 1 + read-write + + + CAP1_INT_ENA + 28 + 1 + read-write + + + CAP2_INT_ENA + 29 + 1 + read-write + + + + + INT_RAW + 0x114 + 0x20 + + + TIMER0_STOP_INT_RAW + 0 + 1 + read-only + + + TIMER1_STOP_INT_RAW + 1 + 1 + read-only + + + TIMER2_STOP_INT_RAW + 2 + 1 + read-only + + + TIMER0_TEZ_INT_RAW + 3 + 1 + read-only + + + TIMER1_TEZ_INT_RAW + 4 + 1 + read-only + + + TIMER2_TEZ_INT_RAW + 5 + 1 + read-only + + + TIMER0_TEP_INT_RAW + 6 + 1 + read-only + + + TIMER1_TEP_INT_RAW + 7 + 1 + read-only + + + TIMER2_TEP_INT_RAW + 8 + 1 + read-only + + + FAULT0_INT_RAW + 9 + 1 + read-only + + + FAULT1_INT_RAW + 10 + 1 + read-only + + + FAULT2_INT_RAW + 11 + 1 + read-only + + + FAULT0_CLR_INT_RAW + 12 + 1 + read-only + + + FAULT1_CLR_INT_RAW + 13 + 1 + read-only + + + FAULT2_CLR_INT_RAW + 14 + 1 + read-only + + + OP0_TEA_INT_RAW + 15 + 1 + read-only + + + OP1_TEA_INT_RAW + 16 + 1 + read-only + + + OP2_TEA_INT_RAW + 17 + 1 + read-only + + + OP0_TEB_INT_RAW + 18 + 1 + read-only + + + OP1_TEB_INT_RAW + 19 + 1 + read-only + + + OP2_TEB_INT_RAW + 20 + 1 + read-only + + + FH0_CBC_INT_RAW + 21 + 1 + read-only + + + FH1_CBC_INT_RAW + 22 + 1 + read-only + + + FH2_CBC_INT_RAW + 23 + 1 + read-only + + + FH0_OST_INT_RAW + 24 + 1 + read-only + + + FH1_OST_INT_RAW + 25 + 1 + read-only + + + FH2_OST_INT_RAW + 26 + 1 + read-only + + + CAP0_INT_RAW + 27 + 1 + read-only + + + CAP1_INT_RAW + 28 + 1 + read-only + + + CAP2_INT_RAW + 29 + 1 + read-only + + + + + INT_ST + 0x118 + 0x20 + + + TIMER0_STOP_INT_ST + 0 + 1 + read-only + + + TIMER1_STOP_INT_ST + 1 + 1 + read-only + + + TIMER2_STOP_INT_ST + 2 + 1 + read-only + + + TIMER0_TEZ_INT_ST + 3 + 1 + read-only + + + TIMER1_TEZ_INT_ST + 4 + 1 + read-only + + + TIMER2_TEZ_INT_ST + 5 + 1 + read-only + + + TIMER0_TEP_INT_ST + 6 + 1 + read-only + + + TIMER1_TEP_INT_ST + 7 + 1 + read-only + + + TIMER2_TEP_INT_ST + 8 + 1 + read-only + + + FAULT0_INT_ST + 9 + 1 + read-only + + + FAULT1_INT_ST + 10 + 1 + read-only + + + FAULT2_INT_ST + 11 + 1 + read-only + + + FAULT0_CLR_INT_ST + 12 + 1 + read-only + + + FAULT1_CLR_INT_ST + 13 + 1 + read-only + + + FAULT2_CLR_INT_ST + 14 + 1 + read-only + + + OP0_TEA_INT_ST + 15 + 1 + read-only + + + OP1_TEA_INT_ST + 16 + 1 + read-only + + + OP2_TEA_INT_ST + 17 + 1 + read-only + + + OP0_TEB_INT_ST + 18 + 1 + read-only + + + OP1_TEB_INT_ST + 19 + 1 + read-only + + + OP2_TEB_INT_ST + 20 + 1 + read-only + + + FH0_CBC_INT_ST + 21 + 1 + read-only + + + FH1_CBC_INT_ST + 22 + 1 + read-only + + + FH2_CBC_INT_ST + 23 + 1 + read-only + + + FH0_OST_INT_ST + 24 + 1 + read-only + + + FH1_OST_INT_ST + 25 + 1 + read-only + + + FH2_OST_INT_ST + 26 + 1 + read-only + + + CAP0_INT_ST + 27 + 1 + read-only + + + CAP1_INT_ST + 28 + 1 + read-only + + + CAP2_INT_ST + 29 + 1 + read-only + + + + + INT_CLR + 0x11C + 0x20 + + + TIMER0_STOP_INT_CLR + 0 + 1 + write-only + + + TIMER1_STOP_INT_CLR + 1 + 1 + write-only + + + TIMER2_STOP_INT_CLR + 2 + 1 + write-only + + + TIMER0_TEZ_INT_CLR + 3 + 1 + write-only + + + TIMER1_TEZ_INT_CLR + 4 + 1 + write-only + + + TIMER2_TEZ_INT_CLR + 5 + 1 + write-only + + + TIMER0_TEP_INT_CLR + 6 + 1 + write-only + + + TIMER1_TEP_INT_CLR + 7 + 1 + write-only + + + TIMER2_TEP_INT_CLR + 8 + 1 + write-only + + + FAULT0_INT_CLR + 9 + 1 + write-only + + + FAULT1_INT_CLR + 10 + 1 + write-only + + + FAULT2_INT_CLR + 11 + 1 + write-only + + + FAULT0_CLR_INT_CLR + 12 + 1 + write-only + + + FAULT1_CLR_INT_CLR + 13 + 1 + write-only + + + FAULT2_CLR_INT_CLR + 14 + 1 + write-only + + + OP0_TEA_INT_CLR + 15 + 1 + write-only + + + OP1_TEA_INT_CLR + 16 + 1 + write-only + + + OP2_TEA_INT_CLR + 17 + 1 + write-only + + + OP0_TEB_INT_CLR + 18 + 1 + write-only + + + OP1_TEB_INT_CLR + 19 + 1 + write-only + + + OP2_TEB_INT_CLR + 20 + 1 + write-only + + + FH0_CBC_INT_CLR + 21 + 1 + write-only + + + FH1_CBC_INT_CLR + 22 + 1 + write-only + + + FH2_CBC_INT_CLR + 23 + 1 + write-only + + + FH0_OST_INT_CLR + 24 + 1 + write-only + + + FH1_OST_INT_CLR + 25 + 1 + write-only + + + FH2_OST_INT_CLR + 26 + 1 + write-only + + + CAP0_INT_CLR + 27 + 1 + write-only + + + CAP1_INT_CLR + 28 + 1 + write-only + + + CAP2_INT_CLR + 29 + 1 + write-only + + + + + CLK + 0x120 + 0x20 + + + EN + 0 + 1 + read-write + + + + + VERSION + 0x124 + 0x20 + 0x02107230 + + + DATE + 0 + 28 + read-write + + + + + + + PWM1 + Motor Control Pulse-Width Modulation + 0x3FF6C000 + + PWM1 + 40 + + + + NRX + Peripheral NRX + NRX + 0x3FF5CC00 + + 0x0 + 0x4 + registers + + + + NRXPD_CTRL + WiFi RX control register + 0xD4 + 0x20 + + + DEMAP_FORCE_PD + 0 + 1 + read-write + + + DEMAP_FORCE_PU + 1 + 1 + read-write + + + VIT_FORCE_PD + 2 + 1 + read-write + + + VIT_FORCE_PU + 3 + 1 + read-write + + + RX_ROT_FORCE_PD + 4 + 1 + read-write + + + RX_ROT_FORCE_PU + 5 + 1 + read-write + + + CHAN_EST_FORCE_PD + 6 + 1 + read-write + + + CHAN_EST_FORCE_PU + 7 + 1 + read-write + + + + + + + PCNT + Pulse Count Controller + PCNT + 0x3FF57000 + + 0x0 + 0xB8 + registers + + + PCNT + 48 + + + + U0_CONF0 + 0x0 + 0x20 + 0x00003C10 + + + FILTER_THRES_U0 + This register is used to filter pluse whose width is smaller than this value for unit0. + 0 + 10 + read-write + + + FILTER_EN_U0 + This is the enable bit for filtering input signals for unit0. + 10 + 1 + read-write + + + THR_ZERO_EN_U0 + This is the enable bit for comparing unit0's count with 0 value. + 11 + 1 + read-write + + + THR_H_LIM_EN_U0 + This is the enable bit for comparing unit0's count with thr_h_lim value. + 12 + 1 + read-write + + + THR_L_LIM_EN_U0 + This is the enable bit for comparing unit0's count with thr_l_lim value. + 13 + 1 + read-write + + + THR_THRES0_EN_U0 + This is the enable bit for comparing unit0's count with thres0 value. + 14 + 1 + read-write + + + THR_THRES1_EN_U0 + This is the enable bit for comparing unit0's count with thres1 value . + 15 + 1 + read-write + + + CH0_NEG_MODE_U0 + This register is used to control the mode of channel0's input negedge signal for unit0. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 16 + 2 + read-write + + + CH0_POS_MODE_U0 + This register is used to control the mode of channel0's input posedge signal for unit0. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 18 + 2 + read-write + + + CH0_HCTRL_MODE_U0 + This register is used to control the mode of channel0's high control signal for unit0. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 20 + 2 + read-write + + + CH0_LCTRL_MODE_U0 + This register is used to control the mode of channel0's low control signal for unit0. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 22 + 2 + read-write + + + CH1_NEG_MODE_U0 + This register is used to control the mode of channel1's input negedge signal for unit0. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 24 + 2 + read-write + + + CH1_POS_MODE_U0 + This register is used to control the mode of channel1's input posedge signal for unit0. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 26 + 2 + read-write + + + CH1_HCTRL_MODE_U0 + This register is used to control the mode of channel1's high control signal for unit0. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 28 + 2 + read-write + + + CH1_LCTRL_MODE_U0 + This register is used to control the mode of channel1's low control signal for unit0. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 30 + 2 + read-write + + + + + U0_CONF1 + 0x4 + 0x20 + + + CNT_THRES0_U0 + This register is used to configure thres0 value for unit0. + 0 + 16 + read-write + + + CNT_THRES1_U0 + This register is used to configure thres1 value for unit0. + 16 + 16 + read-write + + + + + U0_CONF2 + 0x8 + 0x20 + + + CNT_H_LIM_U0 + This register is used to configure thr_h_lim value for unit0. + 0 + 16 + read-write + + + CNT_L_LIM_U0 + This register is used to confiugre thr_l_lim value for unit0. + 16 + 16 + read-write + + + + + U1_CONF0 + 0xC + 0x20 + 0x00003C10 + + + FILTER_THRES_U1 + This register is used to filter pluse whose width is smaller than this value for unit1. + 0 + 10 + read-write + + + FILTER_EN_U1 + This is the enable bit for filtering input signals for unit1. + 10 + 1 + read-write + + + THR_ZERO_EN_U1 + This is the enable bit for comparing unit1's count with 0 value. + 11 + 1 + read-write + + + THR_H_LIM_EN_U1 + This is the enable bit for comparing unit1's count with thr_h_lim value. + 12 + 1 + read-write + + + THR_L_LIM_EN_U1 + This is the enable bit for comparing unit1's count with thr_l_lim value. + 13 + 1 + read-write + + + THR_THRES0_EN_U1 + This is the enable bit for comparing unit1's count with thres0 value. + 14 + 1 + read-write + + + THR_THRES1_EN_U1 + This is the enable bit for comparing unit1's count with thres1 value . + 15 + 1 + read-write + + + CH0_NEG_MODE_U1 + This register is used to control the mode of channel0's input negedge signal for unit1. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 16 + 2 + read-write + + + CH0_POS_MODE_U1 + This register is used to control the mode of channel0's input posedge signal for unit1. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 18 + 2 + read-write + + + CH0_HCTRL_MODE_U1 + This register is used to control the mode of channel0's high control signal for unit1. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 20 + 2 + read-write + + + CH0_LCTRL_MODE_U1 + This register is used to control the mode of channel0's low control signal for unit1. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 22 + 2 + read-write + + + CH1_NEG_MODE_U1 + This register is used to control the mode of channel1's input negedge signal for unit1. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 24 + 2 + read-write + + + CH1_POS_MODE_U1 + This register is used to control the mode of channel1's input posedge signal for unit1. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 26 + 2 + read-write + + + CH1_HCTRL_MODE_U1 + This register is used to control the mode of channel1's high control signal for unit1. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 28 + 2 + read-write + + + CH1_LCTRL_MODE_U1 + This register is used to control the mode of channel1's low control signal for unit1. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 30 + 2 + read-write + + + + + U1_CONF1 + 0x10 + 0x20 + + + CNT_THRES0_U1 + This register is used to configure thres0 value for unit1. + 0 + 16 + read-write + + + CNT_THRES1_U1 + This register is used to configure thres1 value for unit1. + 16 + 16 + read-write + + + + + U1_CONF2 + 0x14 + 0x20 + + + CNT_H_LIM_U1 + This register is used to configure thr_h_lim value for unit1. + 0 + 16 + read-write + + + CNT_L_LIM_U1 + This register is used to confiugre thr_l_lim value for unit1. + 16 + 16 + read-write + + + + + U2_CONF0 + 0x18 + 0x20 + 0x00003C10 + + + FILTER_THRES_U2 + This register is used to filter pluse whose width is smaller than this value for unit2. + 0 + 10 + read-write + + + FILTER_EN_U2 + This is the enable bit for filtering input signals for unit2. + 10 + 1 + read-write + + + THR_ZERO_EN_U2 + This is the enable bit for comparing unit2's count with 0 value. + 11 + 1 + read-write + + + THR_H_LIM_EN_U2 + This is the enable bit for comparing unit2's count with thr_h_lim value. + 12 + 1 + read-write + + + THR_L_LIM_EN_U2 + This is the enable bit for comparing unit2's count with thr_l_lim value. + 13 + 1 + read-write + + + THR_THRES0_EN_U2 + This is the enable bit for comparing unit2's count with thres0 value. + 14 + 1 + read-write + + + THR_THRES1_EN_U2 + This is the enable bit for comparing unit2's count with thres1 value . + 15 + 1 + read-write + + + CH0_NEG_MODE_U2 + This register is used to control the mode of channel0's input negedge signal for unit2. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 16 + 2 + read-write + + + CH0_POS_MODE_U2 + This register is used to control the mode of channel0's input posedge signal for unit2. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 18 + 2 + read-write + + + CH0_HCTRL_MODE_U2 + This register is used to control the mode of channel0's high control signal for unit2. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 20 + 2 + read-write + + + CH0_LCTRL_MODE_U2 + This register is used to control the mode of channel0's low control signal for unit2. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 22 + 2 + read-write + + + CH1_NEG_MODE_U2 + This register is used to control the mode of channel1's input negedge signal for unit2. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 24 + 2 + read-write + + + CH1_POS_MODE_U2 + This register is used to control the mode of channel1's input posedge signal for unit2. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 26 + 2 + read-write + + + CH1_HCTRL_MODE_U2 + This register is used to control the mode of channel1's high control signal for unit2. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 28 + 2 + read-write + + + CH1_LCTRL_MODE_U2 + This register is used to control the mode of channel1's low control signal for unit2. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 30 + 2 + read-write + + + + + U2_CONF1 + 0x1C + 0x20 + + + CNT_THRES0_U2 + This register is used to configure thres0 value for unit2. + 0 + 16 + read-write + + + CNT_THRES1_U2 + This register is used to configure thres1 value for unit2. + 16 + 16 + read-write + + + + + U2_CONF2 + 0x20 + 0x20 + + + CNT_H_LIM_U2 + This register is used to configure thr_h_lim value for unit2. + 0 + 16 + read-write + + + CNT_L_LIM_U2 + This register is used to confiugre thr_l_lim value for unit2. + 16 + 16 + read-write + + + + + U3_CONF0 + 0x24 + 0x20 + 0x00003C10 + + + FILTER_THRES_U3 + This register is used to filter pluse whose width is smaller than this value for unit3. + 0 + 10 + read-write + + + FILTER_EN_U3 + This is the enable bit for filtering input signals for unit3. + 10 + 1 + read-write + + + THR_ZERO_EN_U3 + This is the enable bit for comparing unit3's count with 0 value. + 11 + 1 + read-write + + + THR_H_LIM_EN_U3 + This is the enable bit for comparing unit3's count with thr_h_lim value. + 12 + 1 + read-write + + + THR_L_LIM_EN_U3 + This is the enable bit for comparing unit3's count with thr_l_lim value. + 13 + 1 + read-write + + + THR_THRES0_EN_U3 + This is the enable bit for comparing unit3's count with thres0 value. + 14 + 1 + read-write + + + THR_THRES1_EN_U3 + This is the enable bit for comparing unit3's count with thres1 value . + 15 + 1 + read-write + + + CH0_NEG_MODE_U3 + This register is used to control the mode of channel0's input negedge signal for unit3. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 16 + 2 + read-write + + + CH0_POS_MODE_U3 + This register is used to control the mode of channel0's input posedge signal for unit3. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 18 + 2 + read-write + + + CH0_HCTRL_MODE_U3 + This register is used to control the mode of channel0's high control signal for unit3. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 20 + 2 + read-write + + + CH0_LCTRL_MODE_U3 + This register is used to control the mode of channel0's low control signal for unit3. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 22 + 2 + read-write + + + CH1_NEG_MODE_U3 + This register is used to control the mode of channel1's input negedge signal for unit3. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 24 + 2 + read-write + + + CH1_POS_MODE_U3 + This register is used to control the mode of channel1's input posedge signal for unit3. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 26 + 2 + read-write + + + CH1_HCTRL_MODE_U3 + This register is used to control the mode of channel1's high control signal for unit3. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 28 + 2 + read-write + + + CH1_LCTRL_MODE_U3 + This register is used to control the mode of channel1's low control signal for unit3. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 30 + 2 + read-write + + + + + U3_CONF1 + 0x28 + 0x20 + + + CNT_THRES0_U3 + This register is used to configure thres0 value for unit3. + 0 + 16 + read-write + + + CNT_THRES1_U3 + This register is used to configure thres1 value for unit3. + 16 + 16 + read-write + + + + + U3_CONF2 + 0x2C + 0x20 + + + CNT_H_LIM_U3 + This register is used to configure thr_h_lim value for unit3. + 0 + 16 + read-write + + + CNT_L_LIM_U3 + This register is used to confiugre thr_l_lim value for unit3. + 16 + 16 + read-write + + + + + U4_CONF0 + 0x30 + 0x20 + 0x00003C10 + + + FILTER_THRES_U4 + This register is used to filter pluse whose width is smaller than this value for unit4. + 0 + 10 + read-write + + + FILTER_EN_U4 + This is the enable bit for filtering input signals for unit4. + 10 + 1 + read-write + + + THR_ZERO_EN_U4 + This is the enable bit for comparing unit4's count with 0 value. + 11 + 1 + read-write + + + THR_H_LIM_EN_U4 + This is the enable bit for comparing unit4's count with thr_h_lim value. + 12 + 1 + read-write + + + THR_L_LIM_EN_U4 + This is the enable bit for comparing unit4's count with thr_l_lim value. + 13 + 1 + read-write + + + THR_THRES0_EN_U4 + This is the enable bit for comparing unit4's count with thres0 value. + 14 + 1 + read-write + + + THR_THRES1_EN_U4 + This is the enable bit for comparing unit4's count with thres1 value . + 15 + 1 + read-write + + + CH0_NEG_MODE_U4 + This register is used to control the mode of channel0's input negedge signal for unit4. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 16 + 2 + read-write + + + CH0_POS_MODE_U4 + This register is used to control the mode of channel0's input posedge signal for unit4. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 18 + 2 + read-write + + + CH0_HCTRL_MODE_U4 + This register is used to control the mode of channel0's high control signal for unit4. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 20 + 2 + read-write + + + CH0_LCTRL_MODE_U4 + This register is used to control the mode of channel0's low control signal for unit4. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 22 + 2 + read-write + + + CH1_NEG_MODE_U4 + This register is used to control the mode of channel1's input negedge signal for unit4. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 24 + 2 + read-write + + + CH1_POS_MODE_U4 + This register is used to control the mode of channel1's input posedge signal for unit4. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 26 + 2 + read-write + + + CH1_HCTRL_MODE_U4 + This register is used to control the mode of channel1's high control signal for unit4. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 28 + 2 + read-write + + + CH1_LCTRL_MODE_U4 + This register is used to control the mode of channel1's low control signal for unit4. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 30 + 2 + read-write + + + + + U4_CONF1 + 0x34 + 0x20 + + + CNT_THRES0_U4 + This register is used to configure thres0 value for unit4. + 0 + 16 + read-write + + + CNT_THRES1_U4 + This register is used to configure thres1 value for unit4. + 16 + 16 + read-write + + + + + U4_CONF2 + 0x38 + 0x20 + + + CNT_H_LIM_U4 + This register is used to configure thr_h_lim value for unit4. + 0 + 16 + read-write + + + CNT_L_LIM_U4 + This register is used to confiugre thr_l_lim value for unit4. + 16 + 16 + read-write + + + + + U5_CONF0 + 0x3C + 0x20 + 0x00003C10 + + + FILTER_THRES_U5 + This register is used to filter pluse whose width is smaller than this value for unit5. + 0 + 10 + read-write + + + FILTER_EN_U5 + This is the enable bit for filtering input signals for unit5. + 10 + 1 + read-write + + + THR_ZERO_EN_U5 + This is the enable bit for comparing unit5's count with 0 value. + 11 + 1 + read-write + + + THR_H_LIM_EN_U5 + This is the enable bit for comparing unit5's count with thr_h_lim value. + 12 + 1 + read-write + + + THR_L_LIM_EN_U5 + This is the enable bit for comparing unit5's count with thr_l_lim value. + 13 + 1 + read-write + + + THR_THRES0_EN_U5 + This is the enable bit for comparing unit5's count with thres0 value. + 14 + 1 + read-write + + + THR_THRES1_EN_U5 + This is the enable bit for comparing unit5's count with thres1 value . + 15 + 1 + read-write + + + CH0_NEG_MODE_U5 + This register is used to control the mode of channel0's input negedge signal for unit5. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 16 + 2 + read-write + + + CH0_POS_MODE_U5 + This register is used to control the mode of channel0's input posedge signal for unit5. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 18 + 2 + read-write + + + CH0_HCTRL_MODE_U5 + This register is used to control the mode of channel0's high control signal for unit5. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 20 + 2 + read-write + + + CH0_LCTRL_MODE_U5 + This register is used to control the mode of channel0's low control signal for unit5. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 22 + 2 + read-write + + + CH1_NEG_MODE_U5 + This register is used to control the mode of channel1's input negedge signal for unit5. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 24 + 2 + read-write + + + CH1_POS_MODE_U5 + This register is used to control the mode of channel1's input posedge signal for unit5. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 26 + 2 + read-write + + + CH1_HCTRL_MODE_U5 + This register is used to control the mode of channel1's high control signal for unit5. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 28 + 2 + read-write + + + CH1_LCTRL_MODE_U5 + This register is used to control the mode of channel1's low control signal for unit5. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 30 + 2 + read-write + + + + + U5_CONF1 + 0x40 + 0x20 + + + CNT_THRES0_U5 + This register is used to configure thres0 value for unit5. + 0 + 16 + read-write + + + CNT_THRES1_U5 + This register is used to configure thres1 value for unit5. + 16 + 16 + read-write + + + + + U5_CONF2 + 0x44 + 0x20 + + + CNT_H_LIM_U5 + This register is used to configure thr_h_lim value for unit5. + 0 + 16 + read-write + + + CNT_L_LIM_U5 + This register is used to confiugre thr_l_lim value for unit5. + 16 + 16 + read-write + + + + + U6_CONF0 + 0x48 + 0x20 + 0x00003C10 + + + FILTER_THRES_U6 + This register is used to filter pluse whose width is smaller than this value for unit6. + 0 + 10 + read-write + + + FILTER_EN_U6 + This is the enable bit for filtering input signals for unit6. + 10 + 1 + read-write + + + THR_ZERO_EN_U6 + This is the enable bit for comparing unit6's count with 0 value. + 11 + 1 + read-write + + + THR_H_LIM_EN_U6 + This is the enable bit for comparing unit6's count with thr_h_lim value. + 12 + 1 + read-write + + + THR_L_LIM_EN_U6 + This is the enable bit for comparing unit6's count with thr_l_lim value. + 13 + 1 + read-write + + + THR_THRES0_EN_U6 + This is the enable bit for comparing unit6's count with thres0 value. + 14 + 1 + read-write + + + THR_THRES1_EN_U6 + This is the enable bit for comparing unit6's count with thres1 value . + 15 + 1 + read-write + + + CH0_NEG_MODE_U6 + This register is used to control the mode of channel0's input negedge signal for unit6. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 16 + 2 + read-write + + + CH0_POS_MODE_U6 + This register is used to control the mode of channel0's input posedge signal for unit6. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 18 + 2 + read-write + + + CH0_HCTRL_MODE_U6 + This register is used to control the mode of channel0's high control signal for unit6. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 20 + 2 + read-write + + + CH0_LCTRL_MODE_U6 + This register is used to control the mode of channel0's low control signal for unit6. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 22 + 2 + read-write + + + CH1_NEG_MODE_U6 + This register is used to control the mode of channel1's input negedge signal for unit6. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 24 + 2 + read-write + + + CH1_POS_MODE_U6 + This register is used to control the mode of channel1's input posedge signal for unit6. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 26 + 2 + read-write + + + CH1_HCTRL_MODE_U6 + This register is used to control the mode of channel1's high control signal for unit6. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 28 + 2 + read-write + + + CH1_LCTRL_MODE_U6 + This register is used to control the mode of channel1's low control signal for unit6. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 30 + 2 + read-write + + + + + U6_CONF1 + 0x4C + 0x20 + + + CNT_THRES0_U6 + This register is used to configure thres0 value for unit6. + 0 + 16 + read-write + + + CNT_THRES1_U6 + This register is used to configure thres1 value for unit6. + 16 + 16 + read-write + + + + + U6_CONF2 + 0x50 + 0x20 + + + CNT_H_LIM_U6 + This register is used to configure thr_h_lim value for unit6. + 0 + 16 + read-write + + + CNT_L_LIM_U6 + This register is used to confiugre thr_l_lim value for unit6. + 16 + 16 + read-write + + + + + U7_CONF0 + 0x54 + 0x20 + 0x00003C10 + + + FILTER_THRES_U7 + This register is used to filter pluse whose width is smaller than this value for unit7. + 0 + 10 + read-write + + + FILTER_EN_U7 + This is the enable bit for filtering input signals for unit7. + 10 + 1 + read-write + + + THR_ZERO_EN_U7 + This is the enable bit for comparing unit7's count with 0 value. + 11 + 1 + read-write + + + THR_H_LIM_EN_U7 + This is the enable bit for comparing unit7's count with thr_h_lim value. + 12 + 1 + read-write + + + THR_L_LIM_EN_U7 + This is the enable bit for comparing unit7's count with thr_l_lim value. + 13 + 1 + read-write + + + THR_THRES0_EN_U7 + This is the enable bit for comparing unit7's count with thres0 value. + 14 + 1 + read-write + + + THR_THRES1_EN_U7 + This is the enable bit for comparing unit7's count with thres1 value . + 15 + 1 + read-write + + + CH0_NEG_MODE_U7 + This register is used to control the mode of channel0's input negedge signal for unit7. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 16 + 2 + read-write + + + CH0_POS_MODE_U7 + This register is used to control the mode of channel0's input posedge signal for unit7. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 18 + 2 + read-write + + + CH0_HCTRL_MODE_U7 + This register is used to control the mode of channel0's high control signal for unit7. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 20 + 2 + read-write + + + CH0_LCTRL_MODE_U7 + This register is used to control the mode of channel0's low control signal for unit7. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 22 + 2 + read-write + + + CH1_NEG_MODE_U7 + This register is used to control the mode of channel1's input negedge signal for unit7. 2'd1: increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden + 24 + 2 + read-write + + + CH1_POS_MODE_U7 + This register is used to control the mode of channel1's input posedge signal for unit7. 2'd1: increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden + 26 + 2 + read-write + + + CH1_HCTRL_MODE_U7 + This register is used to control the mode of channel1's high control signal for unit7. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 28 + 2 + read-write + + + CH1_LCTRL_MODE_U7 + This register is used to control the mode of channel1's low control signal for unit7. 2'd0:increase when control signal is low 2'd1: decrease when control signal is high others:forbidden + 30 + 2 + read-write + + + + + U7_CONF1 + 0x58 + 0x20 + + + CNT_THRES0_U7 + This register is used to configure thres0 value for unit7. + 0 + 16 + read-write + + + CNT_THRES1_U7 + This register is used to configure thres1 value for unit7. + 16 + 16 + read-write + + + + + U7_CONF2 + 0x5C + 0x20 + + + CNT_H_LIM_U7 + This register is used to configure thr_h_lim value for unit7. + 0 + 16 + read-write + + + CNT_L_LIM_U7 + This register is used to confiugre thr_l_lim value for unit7. + 16 + 16 + read-write + + + + + U0_CNT + 0x60 + 0x20 + + + PLUS_CNT_U0 + This register stores the current pulse count value for unit0. + 0 + 16 + read-only + + + + + U1_CNT + 0x64 + 0x20 + + + PLUS_CNT_U1 + This register stores the current pulse count value for unit1. + 0 + 16 + read-only + + + + + U2_CNT + 0x68 + 0x20 + + + PLUS_CNT_U2 + This register stores the current pulse count value for unit2. + 0 + 16 + read-only + + + + + U3_CNT + 0x6C + 0x20 + + + PLUS_CNT_U3 + This register stores the current pulse count value for unit3. + 0 + 16 + read-only + + + + + U4_CNT + 0x70 + 0x20 + + + PLUS_CNT_U4 + This register stores the current pulse count value for unit4. + 0 + 16 + read-only + + + + + U5_CNT + 0x74 + 0x20 + + + PLUS_CNT_U5 + This register stores the current pulse count value for unit5. + 0 + 16 + read-only + + + + + U6_CNT + 0x78 + 0x20 + + + PLUS_CNT_U6 + This register stores the current pulse count value for unit6. + 0 + 16 + read-only + + + + + U7_CNT + 0x7C + 0x20 + + + PLUS_CNT_U7 + This register stores the current pulse count value for unit7. + 0 + 16 + read-only + + + + + INT_RAW + 0x80 + 0x20 + + + CNT_THR_EVENT_U0_INT_RAW + This is the interrupt raw bit for channel0 event. + 0 + 1 + read-only + + + CNT_THR_EVENT_U1_INT_RAW + This is the interrupt raw bit for channel1 event. + 1 + 1 + read-only + + + CNT_THR_EVENT_U2_INT_RAW + This is the interrupt raw bit for channel2 event. + 2 + 1 + read-only + + + CNT_THR_EVENT_U3_INT_RAW + This is the interrupt raw bit for channel3 event. + 3 + 1 + read-only + + + CNT_THR_EVENT_U4_INT_RAW + This is the interrupt raw bit for channel4 event. + 4 + 1 + read-only + + + CNT_THR_EVENT_U5_INT_RAW + This is the interrupt raw bit for channel5 event. + 5 + 1 + read-only + + + CNT_THR_EVENT_U6_INT_RAW + This is the interrupt raw bit for channel6 event. + 6 + 1 + read-only + + + CNT_THR_EVENT_U7_INT_RAW + This is the interrupt raw bit for channel7 event. + 7 + 1 + read-only + + + + + INT_ST + 0x84 + 0x20 + + + CNT_THR_EVENT_U0_INT_ST + This is the interrupt status bit for channel0 event. + 0 + 1 + read-only + + + CNT_THR_EVENT_U1_INT_ST + This is the interrupt status bit for channel1 event. + 1 + 1 + read-only + + + CNT_THR_EVENT_U2_INT_ST + This is the interrupt status bit for channel2 event. + 2 + 1 + read-only + + + CNT_THR_EVENT_U3_INT_ST + This is the interrupt status bit for channel3 event. + 3 + 1 + read-only + + + CNT_THR_EVENT_U4_INT_ST + This is the interrupt status bit for channel4 event. + 4 + 1 + read-only + + + CNT_THR_EVENT_U5_INT_ST + This is the interrupt status bit for channel5 event. + 5 + 1 + read-only + + + CNT_THR_EVENT_U6_INT_ST + This is the interrupt status bit for channel6 event. + 6 + 1 + read-only + + + CNT_THR_EVENT_U7_INT_ST + This is the interrupt status bit for channel7 event. + 7 + 1 + read-only + + + + + INT_ENA + 0x88 + 0x20 + + + CNT_THR_EVENT_U0_INT_ENA + This is the interrupt enable bit for channel0 event. + 0 + 1 + read-write + + + CNT_THR_EVENT_U1_INT_ENA + This is the interrupt enable bit for channel1 event. + 1 + 1 + read-write + + + CNT_THR_EVENT_U2_INT_ENA + This is the interrupt enable bit for channel2 event. + 2 + 1 + read-write + + + CNT_THR_EVENT_U3_INT_ENA + This is the interrupt enable bit for channel3 event. + 3 + 1 + read-write + + + CNT_THR_EVENT_U4_INT_ENA + This is the interrupt enable bit for channel4 event. + 4 + 1 + read-write + + + CNT_THR_EVENT_U5_INT_ENA + This is the interrupt enable bit for channel5 event. + 5 + 1 + read-write + + + CNT_THR_EVENT_U6_INT_ENA + This is the interrupt enable bit for channel6 event. + 6 + 1 + read-write + + + CNT_THR_EVENT_U7_INT_ENA + This is the interrupt enable bit for channel7 event. + 7 + 1 + read-write + + + + + INT_CLR + 0x8C + 0x20 + + + CNT_THR_EVENT_U0_INT_CLR + Set this bit to clear channel0 event interrupt. + 0 + 1 + write-only + + + CNT_THR_EVENT_U1_INT_CLR + Set this bit to clear channel1 event interrupt. + 1 + 1 + write-only + + + CNT_THR_EVENT_U2_INT_CLR + Set this bit to clear channel2 event interrupt. + 2 + 1 + write-only + + + CNT_THR_EVENT_U3_INT_CLR + Set this bit to clear channel3 event interrupt. + 3 + 1 + write-only + + + CNT_THR_EVENT_U4_INT_CLR + Set this bit to clear channel4 event interrupt. + 4 + 1 + write-only + + + CNT_THR_EVENT_U5_INT_CLR + Set this bit to clear channel5 event interrupt. + 5 + 1 + write-only + + + CNT_THR_EVENT_U6_INT_CLR + Set this bit to clear channel6 event interrupt. + 6 + 1 + write-only + + + CNT_THR_EVENT_U7_INT_CLR + Set this bit to clear channel7 event interrupt. + 7 + 1 + write-only + + + + + U0_STATUS + 0x90 + 0x20 + + + CORE_STATUS_U0 + 0 + 32 + read-only + + + STATUS_CNT_MODE + 0 + 2 + read-write + + + STATUS_THRES1 + 2 + 1 + read-write + + + STATUS_THRES0 + 3 + 1 + read-write + + + STATUS_L_LIM + 4 + 1 + read-write + + + STATUS_H_LIM + 5 + 1 + read-write + + + STATUS_ZERO + 6 + 1 + read-write + + + + + U1_STATUS + 0x94 + 0x20 + + + CORE_STATUS_U1 + 0 + 32 + read-only + + + + + U2_STATUS + 0x98 + 0x20 + + + CORE_STATUS_U2 + 0 + 32 + read-only + + + + + U3_STATUS + 0x9C + 0x20 + + + CORE_STATUS_U3 + 0 + 32 + read-only + + + + + U4_STATUS + 0xA0 + 0x20 + + + CORE_STATUS_U4 + 0 + 32 + read-only + + + + + U5_STATUS + 0xA4 + 0x20 + + + CORE_STATUS_U5 + 0 + 32 + read-only + + + + + U6_STATUS + 0xA8 + 0x20 + + + CORE_STATUS_U6 + 0 + 32 + read-only + + + + + U7_STATUS + 0xAC + 0x20 + + + CORE_STATUS_U7 + 0 + 32 + read-only + + + + + CTRL + 0xB0 + 0x20 + 0x00005555 + + + PLUS_CNT_RST_U0 + Set this bit to clear unit0's counter. + 0 + 1 + read-write + + + CNT_PAUSE_U0 + Set this bit to pause unit0's counter. + 1 + 1 + read-write + + + PLUS_CNT_RST_U1 + Set this bit to clear unit1's counter. + 2 + 1 + read-write + + + CNT_PAUSE_U1 + Set this bit to pause unit1's counter. + 3 + 1 + read-write + + + PLUS_CNT_RST_U2 + Set this bit to clear unit2's counter. + 4 + 1 + read-write + + + CNT_PAUSE_U2 + Set this bit to pause unit2's counter. + 5 + 1 + read-write + + + PLUS_CNT_RST_U3 + Set this bit to clear unit3's counter. + 6 + 1 + read-write + + + CNT_PAUSE_U3 + Set this bit to pause unit3's counter. + 7 + 1 + read-write + + + PLUS_CNT_RST_U4 + Set this bit to clear unit4's counter. + 8 + 1 + read-write + + + CNT_PAUSE_U4 + Set this bit to pause unit4's counter. + 9 + 1 + read-write + + + PLUS_CNT_RST_U5 + Set this bit to clear unit5's counter. + 10 + 1 + read-write + + + CNT_PAUSE_U5 + Set this bit to pause unit5's counter. + 11 + 1 + read-write + + + PLUS_CNT_RST_U6 + Set this bit to clear unit6's counter. + 12 + 1 + read-write + + + CNT_PAUSE_U6 + Set this bit to pause unit6's counter. + 13 + 1 + read-write + + + PLUS_CNT_RST_U7 + Set this bit to clear unit7's counter. + 14 + 1 + read-write + + + CNT_PAUSE_U7 + Set this bit to pause unit7's counter. + 15 + 1 + read-write + + + CLK_EN + 16 + 1 + read-write + + + + + DATE + 0xFC + 0x20 + 0x14122600 + + + DATE + 0 + 32 + read-write + + + + + + + RMT + Remote Control Peripheral + RMT + 0x3FF56000 + + 0x0 + 0xF8 + registers + + + RMT + 47 + + + + CH0DATA + 0x0 + 0x20 + + + CH1DATA + 0x4 + 0x20 + + + CH2DATA + 0x8 + 0x20 + + + CH3DATA + 0xC + 0x20 + + + CH4DATA + 0x10 + 0x20 + + + CH5DATA + 0x14 + 0x20 + + + CH6DATA + 0x18 + 0x20 + + + CH7DATA + 0x1C + 0x20 + + + 8 + 0x8 + 0-7 + CH%sCONF0 + 0x20 + 0x20 + 0x31100002 + + + DIV_CNT + This register is used to configure the frequency divider's factor in channel0. + 0 + 8 + read-write + + + IDLE_THRES + In receive mode when no edge is detected on the input signal for longer than reg_idle_thres_ch0 then the receive process is done. + 8 + 16 + read-write + + + MEM_SIZE + This register is used to configure the the amount of memory blocks allocated to channel0. + 24 + 4 + read-write + + + CARRIER_EN + This is the carrier modulation enable control bit for channel0. + 28 + 1 + read-write + + + CARRIER_OUT_LV + This bit is used to configure the way carrier wave is modulated for channel0.1'b1:transmit on low output level 1'b0:transmit on high output level. + 29 + 1 + read-write + + + MEM_PD + This bit is used to reduce power consumed by mem. 1:mem is in low power state. + 30 + 1 + read-write + + + CLK_EN + This bit is used to control clock.when software config RMT internal registers it controls the register clock. + 31 + 1 + read-write + + + + + 8 + 0x8 + 0-7 + CH%sCONF1 + 0x24 + 0x20 + 0x00000F20 + + + TX_START + Set this bit to start sending data for channel0. + 0 + 1 + read-write + + + RX_EN + Set this bit to enbale receving data for channel0. + 1 + 1 + read-write + + + MEM_WR_RST + Set this bit to reset write ram address for channel0 by receiver access. + 2 + 1 + read-write + + + MEM_RD_RST + Set this bit to reset read ram address for channel0 by transmitter access. + 3 + 1 + read-write + + + APB_MEM_RST + Set this bit to reset W/R ram address for channel0 by apb fifo access + 4 + 1 + read-write + + + MEM_OWNER + This is the mark of channel0's ram usage right.1'b1：receiver uses the ram 0：transmitter uses the ram + 5 + 1 + read-write + + + TX_CONTI_MODE + Set this bit to continue sending from the first data to the last data in channel0 again and again. + 6 + 1 + read-write + + + RX_FILTER_EN + This is the receive filter enable bit for channel0. + 7 + 1 + read-write + + + RX_FILTER_THRES + in receive mode channel0 ignore input pulse when the pulse width is smaller then this value. + 8 + 8 + read-write + + + REF_CNT_RST + This bit is used to reset divider in channel0. + 16 + 1 + read-write + + + REF_ALWAYS_ON + This bit is used to select base clock. 1'b1:clk_apb 1'b0:clk_ref + 17 + 1 + read-write + + + IDLE_OUT_LV + This bit configures the output signal's level for channel0 in IDLE state. + 18 + 1 + read-write + + + IDLE_OUT_EN + This is the output enable control bit for channel0 in IDLE state. + 19 + 1 + read-write + + + + + CH0STATUS + 0x60 + 0x20 + + + STATUS + The status for channel0 + 0 + 32 + read-only + + + MEM_WADDR_EX + The current memory read address of channel0. + 0 + 10 + read-only + + + MEM_RADDR_EX + The current memory write address of channel0. + 12 + 10 + read-only + + + STATE + The channel0 state machine status register.3'h0 : idle, 3'h1 : send, 3'h2 : read memory, 3'h3 : receive, 3'h4 : wait. + 24 + 3 + read-only + + + MEM_OWNER_ERR + When channel0 is configured for receive mode, this bit will turn to high level if rmt_mem_owner register is not set to 1. + 27 + 1 + read-only + + + MEM_FULL + The memory full status bit for channel0 turns to high level when mem_waddr_ex is greater than or equal to the configuration range. + 28 + 1 + read-only + + + MEM_EMPTY + The memory empty status bit for channel0. in acyclic mode, this bit turns to high level when mem_raddr_ex is greater than or equal to the configured range. + 29 + 1 + read-only + + + APB_MEM_WR_ERR + The apb write memory status bit for channel0 turns to high level when the apb write address exceeds the configuration range. + 30 + 1 + read-only + + + APB_MEM_RD_ERR + The apb read memory status bit for channel0 turns to high level when the apb read address exceeds the configuration range. + 31 + 1 + read-only + + + + + CH1STATUS + 0x64 + 0x20 + + + STATUS + The status for channel1 + 0 + 32 + read-only + + + MEM_WADDR_EX + The current memory read address of channel1. + 0 + 10 + read-only + + + MEM_RADDR_EX + The current memory write address of channel1. + 12 + 10 + read-only + + + STATE + The channel1 state machine status register.3'h0 : idle, 3'h1 : send, 3'h2 : read memory, 3'h3 : receive, 3'h4 : wait. + 24 + 3 + read-only + + + MEM_OWNER_ERR + When channel1 is configured for receive mode, this bit will turn to high level if rmt_mem_owner register is not set to 1. + 27 + 1 + read-only + + + MEM_FULL + The memory full status bit for channel1 turns to high level when mem_waddr_ex is greater than or equal to the configuration range. + 28 + 1 + read-only + + + MEM_EMPTY + The memory empty status bit for channel1. in acyclic mode, this bit turns to high level when mem_raddr_ex is greater than or equal to the configured range. + 29 + 1 + read-only + + + APB_MEM_WR_ERR + The apb write memory status bit for channel1 turns to high level when the apb write address exceeds the configuration range. + 30 + 1 + read-only + + + APB_MEM_RD_ERR + The apb read memory status bit for channel1 turns to high level when the apb read address exceeds the configuration range. + 31 + 1 + read-only + + + + + CH2STATUS + 0x68 + 0x20 + + + STATUS + The status for channel2 + 0 + 32 + read-only + + + MEM_WADDR_EX + The current memory read address of channel2. + 0 + 10 + read-only + + + MEM_RADDR_EX + The current memory write address of channel2. + 12 + 10 + read-only + + + STATE + The channel2 state machine status register.3'h0 : idle, 3'h1 : send, 3'h2 : read memory, 3'h3 : receive, 3'h4 : wait. + 24 + 3 + read-only + + + MEM_OWNER_ERR + When channel2 is configured for receive mode, this bit will turn to high level if rmt_mem_owner register is not set to 1. + 27 + 1 + read-only + + + MEM_FULL + The memory full status bit for channel2 turns to high level when mem_waddr_ex is greater than or equal to the configuration range. + 28 + 1 + read-only + + + MEM_EMPTY + The memory empty status bit for channel2. in acyclic mode, this bit turns to high level when mem_raddr_ex is greater than or equal to the configured range. + 29 + 1 + read-only + + + APB_MEM_WR_ERR + The apb write memory status bit for channel2 turns to high level when the apb write address exceeds the configuration range. + 30 + 1 + read-only + + + APB_MEM_RD_ERR + The apb read memory status bit for channel2 turns to high level when the apb read address exceeds the configuration range. + 31 + 1 + read-only + + + + + CH3STATUS + 0x6C + 0x20 + + + STATUS + The status for channel3 + 0 + 32 + read-only + + + MEM_WADDR_EX + The current memory read address of channel3. + 0 + 10 + read-only + + + MEM_RADDR_EX + The current memory write address of channel3. + 12 + 10 + read-only + + + STATE + The channel3 state machine status register.3'h0 : idle, 3'h1 : send, 3'h2 : read memory, 3'h3 : receive, 3'h4 : wait. + 24 + 3 + read-only + + + MEM_OWNER_ERR + When channel3 is configured for receive mode, this bit will turn to high level if rmt_mem_owner register is not set to 1. + 27 + 1 + read-only + + + MEM_FULL + The memory full status bit for channel3 turns to high level when mem_waddr_ex is greater than or equal to the configuration range. + 28 + 1 + read-only + + + MEM_EMPTY + The memory empty status bit for channel3. in acyclic mode, this bit turns to high level when mem_raddr_ex is greater than or equal to the configured range. + 29 + 1 + read-only + + + APB_MEM_WR_ERR + The apb write memory status bit for channel3 turns to high level when the apb write address exceeds the configuration range. + 30 + 1 + read-only + + + APB_MEM_RD_ERR + The apb read memory status bit for channel3 turns to high level when the apb read address exceeds the configuration range. + 31 + 1 + read-only + + + + + CH4STATUS + 0x70 + 0x20 + + + STATUS + The status for channel4 + 0 + 32 + read-only + + + MEM_WADDR_EX + The current memory read address of channel4. + 0 + 10 + read-only + + + MEM_RADDR_EX + The current memory write address of channel4. + 12 + 10 + read-only + + + STATE + The channel4 state machine status register.3'h0 : idle, 3'h1 : send, 3'h2 : read memory, 3'h3 : receive, 3'h4 : wait. + 24 + 3 + read-only + + + MEM_OWNER_ERR + When channel4 is configured for receive mode, this bit will turn to high level if rmt_mem_owner register is not set to 1. + 27 + 1 + read-only + + + MEM_FULL + The memory full status bit for channel4 turns to high level when mem_waddr_ex is greater than or equal to the configuration range. + 28 + 1 + read-only + + + MEM_EMPTY + The memory empty status bit for channel4. in acyclic mode, this bit turns to high level when mem_raddr_ex is greater than or equal to the configured range. + 29 + 1 + read-only + + + APB_MEM_WR_ERR + The apb write memory status bit for channel4 turns to high level when the apb write address exceeds the configuration range. + 30 + 1 + read-only + + + APB_MEM_RD_ERR + The apb read memory status bit for channel4 turns to high level when the apb read address exceeds the configuration range. + 31 + 1 + read-only + + + + + CH5STATUS + 0x74 + 0x20 + + + STATUS + The status for channel5 + 0 + 32 + read-only + + + MEM_WADDR_EX + The current memory read address of channel5. + 0 + 10 + read-only + + + MEM_RADDR_EX + The current memory write address of channel5. + 12 + 10 + read-only + + + STATE + The channel5 state machine status register.3'h0 : idle, 3'h1 : send, 3'h2 : read memory, 3'h3 : receive, 3'h4 : wait. + 24 + 3 + read-only + + + MEM_OWNER_ERR + When channel5 is configured for receive mode, this bit will turn to high level if rmt_mem_owner register is not set to 1. + 27 + 1 + read-only + + + MEM_FULL + The memory full status bit for channel5 turns to high level when mem_waddr_ex is greater than or equal to the configuration range. + 28 + 1 + read-only + + + MEM_EMPTY + The memory empty status bit for channel5. in acyclic mode, this bit turns to high level when mem_raddr_ex is greater than or equal to the configured range. + 29 + 1 + read-only + + + APB_MEM_WR_ERR + The apb write memory status bit for channel5 turns to high level when the apb write address exceeds the configuration range. + 30 + 1 + read-only + + + APB_MEM_RD_ERR + The apb read memory status bit for channel5 turns to high level when the apb read address exceeds the configuration range. + 31 + 1 + read-only + + + + + CH6STATUS + 0x78 + 0x20 + + + STATUS + The status for channel6 + 0 + 32 + read-only + + + MEM_WADDR_EX + The current memory read address of channel6. + 0 + 10 + read-only + + + MEM_RADDR_EX + The current memory write address of channel6. + 12 + 10 + read-only + + + STATE + The channel6 state machine status register.3'h0 : idle, 3'h1 : send, 3'h2 : read memory, 3'h3 : receive, 3'h4 : wait. + 24 + 3 + read-only + + + MEM_OWNER_ERR + When channel6 is configured for receive mode, this bit will turn to high level if rmt_mem_owner register is not set to 1. + 27 + 1 + read-only + + + MEM_FULL + The memory full status bit for channel6 turns to high level when mem_waddr_ex is greater than or equal to the configuration range. + 28 + 1 + read-only + + + MEM_EMPTY + The memory empty status bit for channel6. in acyclic mode, this bit turns to high level when mem_raddr_ex is greater than or equal to the configured range. + 29 + 1 + read-only + + + APB_MEM_WR_ERR + The apb write memory status bit for channel6 turns to high level when the apb write address exceeds the configuration range. + 30 + 1 + read-only + + + APB_MEM_RD_ERR + The apb read memory status bit for channel6 turns to high level when the apb read address exceeds the configuration range. + 31 + 1 + read-only + + + + + CH7STATUS + 0x7C + 0x20 + + + STATUS + The status for channel7 + 0 + 32 + read-only + + + MEM_WADDR_EX + The current memory read address of channel7. + 0 + 10 + read-only + + + MEM_RADDR_EX + The current memory write address of channel7. + 12 + 10 + read-only + + + STATE + The channel7 state machine status register.3'h0 : idle, 3'h1 : send, 3'h2 : read memory, 3'h3 : receive, 3'h4 : wait. + 24 + 3 + read-only + + + MEM_OWNER_ERR + When channel7 is configured for receive mode, this bit will turn to high level if rmt_mem_owner register is not set to 1. + 27 + 1 + read-only + + + MEM_FULL + The memory full status bit for channel7 turns to high level when mem_waddr_ex is greater than or equal to the configuration range. + 28 + 1 + read-only + + + MEM_EMPTY + The memory empty status bit for channel7. in acyclic mode, this bit turns to high level when mem_raddr_ex is greater than or equal to the configured range. + 29 + 1 + read-only + + + APB_MEM_WR_ERR + The apb write memory status bit for channel7 turns to high level when the apb write address exceeds the configuration range. + 30 + 1 + read-only + + + APB_MEM_RD_ERR + The apb read memory status bit for channel7 turns to high level when the apb read address exceeds the configuration range. + 31 + 1 + read-only + + + + + CH0ADDR + 0x80 + 0x20 + + + APB_MEM_ADDR + The ram relative address in channel0 by apb fifo access + 0 + 32 + read-only + + + + + CH1ADDR + 0x84 + 0x20 + + + APB_MEM_ADDR + The ram relative address in channel1 by apb fifo access + 0 + 32 + read-only + + + + + CH2ADDR + 0x88 + 0x20 + + + APB_MEM_ADDR + The ram relative address in channel2 by apb fifo access + 0 + 32 + read-only + + + + + CH3ADDR + 0x8C + 0x20 + + + APB_MEM_ADDR + The ram relative address in channel3 by apb fifo access + 0 + 32 + read-only + + + + + CH4ADDR + 0x90 + 0x20 + + + APB_MEM_ADDR + The ram relative address in channel4 by apb fifo access + 0 + 32 + read-only + + + + + CH5ADDR + 0x94 + 0x20 + + + APB_MEM_ADDR + The ram relative address in channel5 by apb fifo access + 0 + 32 + read-only + + + + + CH6ADDR + 0x98 + 0x20 + + + APB_MEM_ADDR + The ram relative address in channel6 by apb fifo access + 0 + 32 + read-only + + + + + CH7ADDR + 0x9C + 0x20 + + + APB_MEM_ADDR + The ram relative address in channel7 by apb fifo access + 0 + 32 + read-only + + + + + INT_RAW + 0xA0 + 0x20 + + + 8 + 0x3 + 0-7 + CH%s_TX_END_INT_RAW + The interrupt raw bit for channel %s turns to high level when the transmit process is done. + 0 + 1 + read-only + + + 8 + 0x3 + 0-7 + CH%s_RX_END_INT_RAW + The interrupt raw bit for channel %s turns to high level when the receive process is done. + 1 + 1 + read-only + + + 8 + 0x3 + 0-7 + CH%s_ERR_INT_RAW + The interrupt raw bit for channel %s turns to high level when channle %s detects some errors. + 2 + 1 + read-only + + + 8 + 0x1 + 0-7 + CH%s_TX_THR_EVENT_INT_RAW + The interrupt raw bit for channel %s turns to high level when transmitter in channle%s have send datas more than reg_rmt_tx_lim_ch%s after detecting this interrupt software can updata the old datas with new datas. + 24 + 1 + read-only + + + + + INT_ST + 0xA4 + 0x20 + + + 8 + 0x3 + 0-7 + CH%s_TX_END_INT_ST + The interrupt state bit for channel %s's mt_ch%s_tx_end_int_raw when mt_ch%s_tx_end_int_ena is set to %s. + 0 + 1 + read-only + + + 8 + 0x3 + 0-7 + CH%s_RX_END_INT_ST + The interrupt state bit for channel %s's rmt_ch%s_rx_end_int_raw when rmt_ch%s_rx_end_int_ena is set to %s. + 1 + 1 + read-only + + + 8 + 0x3 + 0-7 + CH%s_ERR_INT_ST + The interrupt state bit for channel %s's rmt_ch%s_err_int_raw when rmt_ch%s_err_int_ena is set to %s. + 2 + 1 + read-only + + + 8 + 0x1 + 0-7 + CH%s_TX_THR_EVENT_INT_ST + The interrupt state bit for channel %s's rmt_ch%s_tx_thr_event_int_raw when mt_ch%s_tx_thr_event_int_ena is set to 1. + 24 + 1 + read-only + + + + + INT_ENA + 0xA8 + 0x20 + + + 8 + 0x3 + 0-7 + CH%s_TX_END_INT_ENA + Set this bit to enable rmt_ch%s_tx_end_int_st. + 0 + 1 + read-write + + + 8 + 0x3 + 0-7 + CH%s_RX_END_INT_ENA + Set this bit to enable rmt_ch%s_rx_end_int_st. + 1 + 1 + read-write + + + 8 + 0x3 + 0-7 + CH%s_ERR_INT_ENA + Set this bit to enable rmt_ch%s_err_int_st. + 2 + 1 + read-write + + + 8 + 0x1 + 0-7 + CH%s_TX_THR_EVENT_INT_ENA + Set this bit to enable rmt_ch%s_tx_thr_event_int_st. + 24 + 1 + read-write + + + + + INT_CLR + 0xAC + 0x20 + + + 8 + 0x3 + 0-7 + CH%s_TX_END_INT_CLR + Set this bit to clear the rmt_ch%s_rx_end_int_raw.. + 0 + 1 + write-only + + + 8 + 0x3 + 0-7 + CH%s_RX_END_INT_CLR + Set this bit to clear the rmt_ch%s_tx_end_int_raw. + 1 + 1 + write-only + + + 8 + 0x3 + 0-7 + CH%s_ERR_INT_CLR + Set this bit to clear the rmt_ch%s_err_int_raw. + 2 + 1 + write-only + + + 8 + 0x1 + 0-7 + CH%s_TX_THR_EVENT_INT_CLR + Set this bit to clear the rmt_ch%s_tx_thr_event_int_raw interrupt. + 24 + 1 + write-only + + + + + CH0CARRIER_DUTY + 0xB0 + 0x20 + 0x00400040 + + + CARRIER_LOW + This register is used to configure carrier wave's low level value for channel0. + 0 + 16 + read-write + + + CARRIER_HIGH + This register is used to configure carrier wave's high level value for channel0. + 16 + 16 + read-write + + + + + CH1CARRIER_DUTY + 0xB4 + 0x20 + 0x00400040 + + + CARRIER_LOW + This register is used to configure carrier wave's low level value for channel1. + 0 + 16 + read-write + + + CARRIER_HIGH + This register is used to configure carrier wave's high level value for channel1. + 16 + 16 + read-write + + + + + CH2CARRIER_DUTY + 0xB8 + 0x20 + 0x00400040 + + + CARRIER_LOW + This register is used to configure carrier wave's low level value for channel2. + 0 + 16 + read-write + + + CARRIER_HIGH + This register is used to configure carrier wave's high level value for channel2. + 16 + 16 + read-write + + + + + CH3CARRIER_DUTY + 0xBC + 0x20 + 0x00400040 + + + CARRIER_LOW + This register is used to configure carrier wave's low level value for channel3. + 0 + 16 + read-write + + + CARRIER_HIGH + This register is used to configure carrier wave's high level value for channel3. + 16 + 16 + read-write + + + + + CH4CARRIER_DUTY + 0xC0 + 0x20 + 0x00400040 + + + CARRIER_LOW + This register is used to configure carrier wave's low level value for channel4. + 0 + 16 + read-write + + + CARRIER_HIGH + This register is used to configure carrier wave's high level value for channel4. + 16 + 16 + read-write + + + + + CH5CARRIER_DUTY + 0xC4 + 0x20 + 0x00400040 + + + CARRIER_LOW + This register is used to configure carrier wave's low level value for channel5. + 0 + 16 + read-write + + + CARRIER_HIGH + This register is used to configure carrier wave's high level value for channel5. + 16 + 16 + read-write + + + + + CH6CARRIER_DUTY + 0xC8 + 0x20 + 0x00400040 + + + CARRIER_LOW + This register is used to configure carrier wave's low level value for channel6. + 0 + 16 + read-write + + + CARRIER_HIGH + This register is used to configure carrier wave's high level value for channel6. + 16 + 16 + read-write + + + + + CH7CARRIER_DUTY + 0xCC + 0x20 + 0x00400040 + + + CARRIER_LOW + This register is used to configure carrier wave's low level value for channel7. + 0 + 16 + read-write + + + CARRIER_HIGH + This register is used to configure carrier wave's high level value for channel7. + 16 + 16 + read-write + + + + + 8 + 0x4 + 0-7 + CH%s_TX_LIM + 0xD0 + 0x20 + 0x00000080 + + + TX_LIM + When channel0 sends more than reg_rmt_tx_lim_ch0 datas then channel0 produce the relative interrupt. + 0 + 9 + read-write + + + + + APB_CONF + 0xF0 + 0x20 + + + APB_FIFO_MASK + Set this bit to disable apb fifo access + 0 + 1 + read-write + + + MEM_TX_WRAP_EN + when datas need to be send is more than channel's mem can store then set this bit to enable reusage of mem this bit is used together with reg_rmt_tx_lim_chn. + 1 + 1 + read-write + + + + + DATE + 0xFC + 0x20 + 0x16022600 + + + DATE + This is the version register. + 0 + 32 + read-write + + + + + + + RNG + Hardware random number generator + RNG + 0x60035000 + + 0x0 + 0x4 + registers + + + + DATA + Random number data + 0x144 + 0x20 + + + + + RSA + RSA (Rivest Shamir Adleman) Accelerator + RSA + 0x3FF02000 + + 0x0 + 0x1C + registers + + + RSA + 51 + + + + M_PRIME + 0x0 + 0x20 + + + M_PRIME + This register contains M’. + 0 + 8 + read-write + + + + + MODEXP_MODE + 0x4 + 0x20 + + + MODEXP_MODE + This register contains the mode of modular exponentiation. + 0 + 2 + read-write + + + + + MODEXP_START + 0x8 + 0x20 + + + MODEXP_START + Write 1 to start modular exponentiation. + 0 + 1 + write-only + + + + + MULT_MODE + 0xC + 0x20 + + + MULT_MODE + This register contains the mode of modular multiplication and multiplication. + 0 + 1 + read-write + + + + + MULT_START + 0x10 + 0x20 + + + MULT_START + Write 1 to start modular multiplication or multiplication. + 0 + 1 + write-only + + + + + INTERRUPT + 0x14 + 0x20 + + + INTERRUPT + RSA interrupt status register. Will read 1 once an operation has completed. + 0 + 1 + read-write + + + + + CLEAN + 0x18 + 0x20 + + + CLEAN + This bit will read 1 once the memory initialization is completed. + 0 + 1 + read-only + + + + + + + RTC_CNTL + Real-Time Clock Control + RTC_CNTL + 0x3FF48000 + + 0x0 + 0xDC + registers + + + RTC_CORE + 46 + + + + OPTIONS0 + 0x0 + 0x20 + 0x1C492000 + + + SW_STALL_APPCPU_C0 + {reg_sw_stall_appcpu_c1[5:0] reg_sw_stall_appcpu_c0[1:0]} == 0x86 will stall APP CPU + 0 + 2 + read-write + + + SW_STALL_PROCPU_C0 + {reg_sw_stall_procpu_c1[5:0] reg_sw_stall_procpu_c0[1:0]} == 0x86 will stall PRO CPU + 2 + 2 + read-write + + + SW_APPCPU_RST + APP CPU SW reset + 4 + 1 + write-only + + + SW_PROCPU_RST + PRO CPU SW reset + 5 + 1 + write-only + + + BB_I2C_FORCE_PD + BB_I2C force power down + 6 + 1 + read-write + + + BB_I2C_FORCE_PU + BB_I2C force power up + 7 + 1 + read-write + + + BBPLL_I2C_FORCE_PD + BB_PLL _I2C force power down + 8 + 1 + read-write + + + BBPLL_I2C_FORCE_PU + BB_PLL_I2C force power up + 9 + 1 + read-write + + + BBPLL_FORCE_PD + BB_PLL force power down + 10 + 1 + read-write + + + BBPLL_FORCE_PU + BB_PLL force power up + 11 + 1 + read-write + + + XTL_FORCE_PD + crystall force power down + 12 + 1 + read-write + + + XTL_FORCE_PU + crystall force power up + 13 + 1 + read-write + + + BIAS_SLEEP_FOLW_8M + BIAS_SLEEP follow CK8M + 14 + 1 + read-write + + + BIAS_FORCE_SLEEP + BIAS_SLEEP force sleep + 15 + 1 + read-write + + + BIAS_FORCE_NOSLEEP + BIAS_SLEEP force no sleep + 16 + 1 + read-write + + + BIAS_I2C_FOLW_8M + BIAS_I2C follow CK8M + 17 + 1 + read-write + + + BIAS_I2C_FORCE_PD + BIAS_I2C force power down + 18 + 1 + read-write + + + BIAS_I2C_FORCE_PU + BIAS_I2C force power up + 19 + 1 + read-write + + + BIAS_CORE_FOLW_8M + BIAS_CORE follow CK8M + 20 + 1 + read-write + + + BIAS_CORE_FORCE_PD + BIAS_CORE force power down + 21 + 1 + read-write + + + BIAS_CORE_FORCE_PU + BIAS_CORE force power up + 22 + 1 + read-write + + + XTL_FORCE_ISO + 23 + 1 + read-write + + + PLL_FORCE_ISO + 24 + 1 + read-write + + + ANALOG_FORCE_ISO + 25 + 1 + read-write + + + XTL_FORCE_NOISO + 26 + 1 + read-write + + + PLL_FORCE_NOISO + 27 + 1 + read-write + + + ANALOG_FORCE_NOISO + 28 + 1 + read-write + + + DG_WRAP_FORCE_RST + digital wrap force reset in deep sleep + 29 + 1 + read-write + + + DG_WRAP_FORCE_NORST + digital core force no reset in deep sleep + 30 + 1 + read-write + + + SW_SYS_RST + SW system reset + 31 + 1 + write-only + + + + + SLP_TIMER0 + 0x4 + 0x20 + + + SLP_VAL_LO + RTC sleep timer low 32 bits + 0 + 32 + read-write + + + + + SLP_TIMER1 + 0x8 + 0x20 + + + SLP_VAL_HI + RTC sleep timer high 16 bits + 0 + 16 + read-write + + + MAIN_TIMER_ALARM_EN + timer alarm enable bit + 16 + 1 + read-write + + + + + TIME_UPDATE + 0xC + 0x20 + + + TIME_VALID + To indicate the register is updated + 30 + 1 + read-only + + + TIME_UPDATE + Set 1: to update register with RTC timer + 31 + 1 + write-only + + + + + TIME0 + 0x10 + 0x20 + + + TIME_LO + RTC timer low 32 bits + 0 + 32 + read-only + + + + + TIME1 + 0x14 + 0x20 + + + TIME_HI + RTC timer high 16 bits + 0 + 16 + read-only + + + + + STATE0 + 0x18 + 0x20 + 0x00300000 + + + TOUCH_WAKEUP_FORCE_EN + touch controller force wake up + 20 + 1 + read-write + + + ULP_CP_WAKEUP_FORCE_EN + ULP-coprocessor force wake up + 21 + 1 + read-write + + + APB2RTC_BRIDGE_SEL + 1: APB to RTC using bridge 0: APB to RTC using sync + 22 + 1 + read-write + + + TOUCH_SLP_TIMER_EN + touch timer enable bit + 23 + 1 + read-write + + + ULP_CP_SLP_TIMER_EN + ULP-coprocessor timer enable bit + 24 + 1 + read-write + + + SDIO_ACTIVE_IND + SDIO active indication + 28 + 1 + read-only + + + SLP_WAKEUP + sleep wakeup bit + 29 + 1 + read-write + + + SLP_REJECT + sleep reject bit + 30 + 1 + read-write + + + SLEEP_EN + sleep enable bit + 31 + 1 + read-write + + + + + TIMER1 + 0x1C + 0x20 + 0x28140403 + + + CPU_STALL_EN + CPU stall enable bit + 0 + 1 + read-write + + + CPU_STALL_WAIT + CPU stall wait cycles in fast_clk_rtc + 1 + 5 + read-write + + + CK8M_WAIT + CK8M wait cycles in slow_clk_rtc + 6 + 8 + read-write + + + XTL_BUF_WAIT + XTAL wait cycles in slow_clk_rtc + 14 + 10 + read-write + + + PLL_BUF_WAIT + PLL wait cycles in slow_clk_rtc + 24 + 8 + read-write + + + + + TIMER2 + 0x20 + 0x20 + 0x01080000 + + + ULPCP_TOUCH_START_WAIT + wait cycles in slow_clk_rtc before ULP-coprocessor / touch controller start to work + 15 + 9 + read-write + + + MIN_TIME_CK8M_OFF + minimal cycles in slow_clk_rtc for CK8M in power down state + 24 + 8 + read-write + + + + + TIMER3 + 0x24 + 0x20 + 0x14160A08 + + + WIFI_WAIT_TIMER + 0 + 9 + read-write + + + WIFI_POWERUP_TIMER + 9 + 7 + read-write + + + ROM_RAM_WAIT_TIMER + 16 + 9 + read-write + + + ROM_RAM_POWERUP_TIMER + 25 + 7 + read-write + + + + + TIMER4 + 0x28 + 0x20 + 0x10200A08 + + + WAIT_TIMER + 0 + 9 + read-write + + + POWERUP_TIMER + 9 + 7 + read-write + + + DG_WRAP_WAIT_TIMER + 16 + 9 + read-write + + + DG_WRAP_POWERUP_TIMER + 25 + 7 + read-write + + + + + TIMER5 + 0x2C + 0x20 + 0x12148001 + + + ULP_CP_SUBTIMER_PREDIV + 0 + 8 + read-write + + + MIN_SLP_VAL + minimal sleep cycles in slow_clk_rtc + 8 + 8 + read-write + + + RTCMEM_WAIT_TIMER + 16 + 9 + read-write + + + RTCMEM_POWERUP_TIMER + 25 + 7 + read-write + + + + + ANA_CONF + 0x30 + 0x20 + 0x00800000 + + + PLLA_FORCE_PD + PLLA force power down + 23 + 1 + read-write + + + PLLA_FORCE_PU + PLLA force power up + 24 + 1 + read-write + + + BBPLL_CAL_SLP_START + start BBPLL calibration during sleep + 25 + 1 + read-write + + + PVTMON_PU + 1: PVTMON power up otherwise power down + 26 + 1 + read-write + + + TXRF_I2C_PU + 1: TXRF_I2C power up otherwise power down + 27 + 1 + read-write + + + RFRX_PBUS_PU + 1: RFRX_PBUS power up otherwise power down + 28 + 1 + read-write + + + CKGEN_I2C_PU + 1: CKGEN_I2C power up otherwise power down + 30 + 1 + read-write + + + PLL_I2C_PU + 1: PLL_I2C power up otherwise power down + 31 + 1 + read-write + + + + + RESET_STATE + 0x34 + 0x20 + 0x00003000 + + + RESET_CAUSE_PROCPU + reset cause of PRO CPU + 0 + 6 + read-only + + + RESET_CAUSE_APPCPU + reset cause of APP CPU + 6 + 6 + read-only + + + APPCPU_STAT_VECTOR_SEL + APP CPU state vector sel + 12 + 1 + read-write + + + PROCPU_STAT_VECTOR_SEL + PRO CPU state vector sel + 13 + 1 + read-write + + + + + WAKEUP_STATE + 0x38 + 0x20 + 0x00006000 + + + WAKEUP_CAUSE + wakeup cause + 0 + 11 + read-only + + + WAKEUP_ENA + wakeup enable bitmap + 11 + 11 + read-write + + + GPIO_WAKEUP_FILTER + enable filter for gpio wakeup event + 22 + 1 + read-write + + + + + INT_ENA + 0x3C + 0x20 + + + SLP_WAKEUP_INT_ENA + enable sleep wakeup interrupt + 0 + 1 + read-write + + + SLP_REJECT_INT_ENA + enable sleep reject interrupt + 1 + 1 + read-write + + + SDIO_IDLE_INT_ENA + enable SDIO idle interrupt + 2 + 1 + read-write + + + WDT_INT_ENA + enable RTC WDT interrupt + 3 + 1 + read-write + + + TIME_VALID_INT_ENA + enable RTC time valid interrupt + 4 + 1 + read-write + + + ULP_CP_INT_ENA + enable ULP-coprocessor interrupt + 5 + 1 + read-write + + + TOUCH_INT_ENA + enable touch interrupt + 6 + 1 + read-write + + + BROWN_OUT_INT_ENA + enable brown out interrupt + 7 + 1 + read-write + + + MAIN_TIMER_INT_ENA + enable RTC main timer interrupt + 8 + 1 + read-write + + + + + INT_RAW + 0x40 + 0x20 + + + SLP_WAKEUP_INT_RAW + sleep wakeup interrupt raw + 0 + 1 + read-only + + + SLP_REJECT_INT_RAW + sleep reject interrupt raw + 1 + 1 + read-only + + + SDIO_IDLE_INT_RAW + SDIO idle interrupt raw + 2 + 1 + read-only + + + WDT_INT_RAW + RTC WDT interrupt raw + 3 + 1 + read-only + + + TIME_VALID_INT_RAW + RTC time valid interrupt raw + 4 + 1 + read-only + + + ULP_CP_INT_RAW + ULP-coprocessor interrupt raw + 5 + 1 + read-only + + + TOUCH_INT_RAW + touch interrupt raw + 6 + 1 + read-only + + + BROWN_OUT_INT_RAW + brown out interrupt raw + 7 + 1 + read-only + + + MAIN_TIMER_INT_RAW + RTC main timer interrupt raw + 8 + 1 + read-only + + + + + INT_ST + 0x44 + 0x20 + + + SLP_WAKEUP_INT_ST + sleep wakeup interrupt state + 0 + 1 + read-only + + + SLP_REJECT_INT_ST + sleep reject interrupt state + 1 + 1 + read-only + + + SDIO_IDLE_INT_ST + SDIO idle interrupt state + 2 + 1 + read-only + + + WDT_INT_ST + RTC WDT interrupt state + 3 + 1 + read-only + + + TIME_VALID_INT_ST + RTC time valid interrupt state + 4 + 1 + read-only + + + SAR_INT_ST + ULP-coprocessor interrupt state + 5 + 1 + read-only + + + TOUCH_INT_ST + touch interrupt state + 6 + 1 + read-only + + + BROWN_OUT_INT_ST + brown out interrupt state + 7 + 1 + read-only + + + MAIN_TIMER_INT_ST + RTC main timer interrupt state + 8 + 1 + read-only + + + + + INT_CLR + 0x48 + 0x20 + + + SLP_WAKEUP_INT_CLR + Clear sleep wakeup interrupt state + 0 + 1 + write-only + + + SLP_REJECT_INT_CLR + Clear sleep reject interrupt state + 1 + 1 + write-only + + + SDIO_IDLE_INT_CLR + Clear SDIO idle interrupt state + 2 + 1 + write-only + + + WDT_INT_CLR + Clear RTC WDT interrupt state + 3 + 1 + write-only + + + TIME_VALID_INT_CLR + Clear RTC time valid interrupt state + 4 + 1 + write-only + + + SAR_INT_CLR + Clear ULP-coprocessor interrupt state + 5 + 1 + write-only + + + TOUCH_INT_CLR + Clear touch interrupt state + 6 + 1 + write-only + + + BROWN_OUT_INT_CLR + Clear brown out interrupt state + 7 + 1 + write-only + + + MAIN_TIMER_INT_CLR + Clear RTC main timer interrupt state + 8 + 1 + write-only + + + + + STORE0 + 0x4C + 0x20 + + + SCRATCH0 + 32-bit general purpose retention register + 0 + 32 + read-write + + + + + STORE1 + 0x50 + 0x20 + + + SCRATCH1 + 32-bit general purpose retention register + 0 + 32 + read-write + + + + + STORE2 + 0x54 + 0x20 + + + SCRATCH2 + 32-bit general purpose retention register + 0 + 32 + read-write + + + + + STORE3 + 0x58 + 0x20 + + + SCRATCH3 + 32-bit general purpose retention register + 0 + 32 + read-write + + + + + EXT_XTL_CONF + 0x5C + 0x20 + + + XTL_EXT_CTR_LV + 0: power down XTAL at high level 1: power down XTAL at low level + 30 + 1 + read-write + + + XTL_EXT_CTR_EN + enable control XTAL by external pads + 31 + 1 + read-write + + + + + EXT_WAKEUP_CONF + 0x60 + 0x20 + + + EXT_WAKEUP0_LV + 0: external wakeup at low level 1: external wakeup at high level + 30 + 1 + read-write + + + EXT_WAKEUP1_LV + 0: external wakeup at low level 1: external wakeup at high level + 31 + 1 + read-write + + + + + SLP_REJECT_CONF + 0x64 + 0x20 + + + GPIO_REJECT_EN + enable GPIO reject + 24 + 1 + read-write + + + SDIO_REJECT_EN + enable SDIO reject + 25 + 1 + read-write + + + LIGHT_SLP_REJECT_EN + enable reject for light sleep + 26 + 1 + read-write + + + DEEP_SLP_REJECT_EN + enable reject for deep sleep + 27 + 1 + read-write + + + REJECT_CAUSE + sleep reject cause + 28 + 4 + read-only + + + + + CPU_PERIOD_CONF + 0x68 + 0x20 + + + CPUSEL_CONF + CPU sel option + 29 + 1 + read-write + + + CPUPERIOD_SEL + CPU period sel + 30 + 2 + read-write + + + + + SDIO_ACT_CONF + 0x6C + 0x20 + + + SDIO_ACT_DNUM + 22 + 10 + read-write + + + + + CLK_CONF + 0x70 + 0x20 + 0x00002210 + + + CK8M_DIV + CK8M_D256_OUT divider. 00: div128 01: div256 10: div512 11: div1024. + 4 + 2 + read-write + + CK8M_DIV + read-write + + DIV128 + DIV128 + 0 + + + DIV256 + DIV256 + 1 + + + DIV512 + DIV512 + 2 + + + DIV1024 + DIV1024 + 3 + + + + + ENB_CK8M + disable CK8M and CK8M_D256_OUT + 6 + 1 + read-write + + + ENB_CK8M_DIV + 1: CK8M_D256_OUT is actually CK8M 0: CK8M_D256_OUT is CK8M divided by 256 + 7 + 1 + read-write + + ENB_CK8M_DIV + read-write + + CK8M_DIV_256 + CK8M_DIV_256 + 0 + + + CK8M + CK8M + 1 + + + + + DIG_XTAL32K_EN + enable CK_XTAL_32K for digital core (no relationship with RTC core) + 8 + 1 + read-write + + + DIG_CLK8M_D256_EN + enable CK8M_D256_OUT for digital core (no relationship with RTC core) + 9 + 1 + read-write + + + DIG_CLK8M_EN + enable CK8M for digital core (no relationship with RTC core) + 10 + 1 + read-write + + + CK8M_DFREQ_FORCE + 11 + 1 + read-write + + + CK8M_DIV_SEL + divider = reg_ck8m_div_sel + 1 + 12 + 3 + read-write + + + XTAL_FORCE_NOGATING + XTAL force no gating during sleep + 15 + 1 + read-write + + + CK8M_FORCE_NOGATING + CK8M force no gating during sleep + 16 + 1 + read-write + + + CK8M_DFREQ + CK8M_DFREQ + 17 + 8 + read-write + + + CK8M_FORCE_PD + CK8M force power down + 25 + 1 + read-write + + + CK8M_FORCE_PU + CK8M force power up + 26 + 1 + read-write + + + SOC_CLK_SEL + SOC clock sel. 0: XTAL 1: PLL 2: CK8M 3: APLL + 27 + 2 + read-write + + SOC_CLK_SEL + read-write + + XTAL + XTAL + 0 + + + PLL + PLL + 1 + + + CK8M + CK8M + 2 + + + APLL + APLL + 3 + + + + + FAST_CLK_RTC_SEL + fast_clk_rtc sel. 0: XTAL div 4 1: CK8M + 29 + 1 + read-write + + FAST_CLK_RTC_SEL + read-write + + XTAL_DIV_4 + XTAL_DIV_4 + 0 + + + CK8M + CK8M + 1 + + + + + ANA_CLK_RTC_SEL + slow_clk_rtc sel. 0: SLOW_CK 1: CK_XTAL_32K 2: CK8M_D256_OUT + 30 + 2 + read-write + + ANA_CLK_RTC_SEL + read-write + + SLOW_CK + SLOW_CK + 0 + + + CK_XTAL_32K + CK_XTAL_32K + 1 + + + CK8M_D256_OUT + CK8M_D256_OUT + 2 + + + + + + + SDIO_CONF + 0x74 + 0x20 + 0x02A00000 + + + SDIO_PD_EN + power down SDIO_REG in sleep. Only active when reg_sdio_force = 0 + 21 + 1 + read-write + + + SDIO_FORCE + 1: use SW option to control SDIO_REG 0: use state machine + 22 + 1 + read-write + + + SDIO_TIEH + SW option for SDIO_TIEH. Only active when reg_sdio_force = 1 + 23 + 1 + read-write + + + REG1P8_READY + read only register for REG1P8_READY + 24 + 1 + read-only + + + DREFL_SDIO + SW option for DREFL_SDIO. Only active when reg_sdio_force = 1 + 25 + 2 + read-write + + + DREFM_SDIO + SW option for DREFM_SDIO. Only active when reg_sdio_force = 1 + 27 + 2 + read-write + + + DREFH_SDIO + SW option for DREFH_SDIO. Only active when reg_sdio_force = 1 + 29 + 2 + read-write + + + XPD_SDIO + SW option for XPD_SDIO_REG. Only active when reg_sdio_force = 1 + 31 + 1 + read-write + + + + + BIAS_CONF + 0x78 + 0x20 + + + DBG_ATTEN + DBG_ATTEN + 24 + 2 + read-write + + + ENB_SCK_XTAL + ENB_SCK_XTAL + 26 + 1 + read-write + + + INC_HEARTBEAT_REFRESH + INC_HEARTBEAT_REFRESH + 27 + 1 + read-write + + + DEC_HEARTBEAT_PERIOD + DEC_HEARTBEAT_PERIOD + 28 + 1 + read-write + + + INC_HEARTBEAT_PERIOD + INC_HEARTBEAT_PERIOD + 29 + 1 + read-write + + + DEC_HEARTBEAT_WIDTH + DEC_HEARTBEAT_WIDTH + 30 + 1 + read-write + + + RST_BIAS_I2C + RST_BIAS_I2C + 31 + 1 + read-write + + + + + REG + 0x7C + 0x20 + 0x29002400 + + + SCK_DCAP_FORCE + N/A + 7 + 1 + read-write + + + DIG_DBIAS_SLP + DIG_REG_DBIAS during sleep + 8 + 3 + read-write + + + DIG_DBIAS_WAK + DIG_REG_DBIAS during wakeup + 11 + 3 + read-write + + + SCK_DCAP + SCK_DCAP + 14 + 8 + read-write + + + DBIAS_SLP + RTC_DBIAS during sleep + 22 + 3 + read-write + + + DBIAS_WAK + RTC_DBIAS during wakeup + 25 + 3 + read-write + + + DBOOST_FORCE_PD + RTC_DBOOST force power down + 28 + 1 + read-write + + + DBOOST_FORCE_PU + RTC_DBOOST force power up + 29 + 1 + read-write + + + FORCE_PD + RTC_REG force power down (for RTC_REG power down means decrease the voltage to 0.8v or lower ) + 30 + 1 + read-write + + + FORCE_PU + RTC_REG force power up + 31 + 1 + read-write + + + + + PWC + 0x80 + 0x20 + 0x00012925 + + + FASTMEM_FORCE_NOISO + Fast RTC memory force no ISO + 0 + 1 + read-write + + + FASTMEM_FORCE_ISO + Fast RTC memory force ISO + 1 + 1 + read-write + + + SLOWMEM_FORCE_NOISO + RTC memory force no ISO + 2 + 1 + read-write + + + SLOWMEM_FORCE_ISO + RTC memory force ISO + 3 + 1 + read-write + + + FORCE_ISO + rtc_peri force ISO + 4 + 1 + read-write + + + FORCE_NOISO + rtc_peri force no ISO + 5 + 1 + read-write + + + FASTMEM_FOLW_CPU + 1: Fast RTC memory PD following CPU 0: fast RTC memory PD following RTC state machine + 6 + 1 + read-write + + + FASTMEM_FORCE_LPD + Fast RTC memory force PD + 7 + 1 + read-write + + + FASTMEM_FORCE_LPU + Fast RTC memory force no PD + 8 + 1 + read-write + + + SLOWMEM_FOLW_CPU + 1: RTC memory PD following CPU 0: RTC memory PD following RTC state machine + 9 + 1 + read-write + + + SLOWMEM_FORCE_LPD + RTC memory force PD + 10 + 1 + read-write + + + SLOWMEM_FORCE_LPU + RTC memory force no PD + 11 + 1 + read-write + + + FASTMEM_FORCE_PD + Fast RTC memory force power down + 12 + 1 + read-write + + + FASTMEM_FORCE_PU + Fast RTC memory force power up + 13 + 1 + read-write + + + FASTMEM_PD_EN + enable power down fast RTC memory in sleep + 14 + 1 + read-write + + + SLOWMEM_FORCE_PD + RTC memory force power down + 15 + 1 + read-write + + + SLOWMEM_FORCE_PU + RTC memory force power up + 16 + 1 + read-write + + + SLOWMEM_PD_EN + enable power down RTC memory in sleep + 17 + 1 + read-write + + + FORCE_PD + rtc_peri force power down + 18 + 1 + read-write + + + FORCE_PU + rtc_peri force power up + 19 + 1 + read-write + + + PD_EN + enable power down rtc_peri in sleep + 20 + 1 + read-write + + + + + DIG_PWC + 0x84 + 0x20 + 0x00155550 + + + LSLP_MEM_FORCE_PD + memories in digital core force PD in sleep + 3 + 1 + read-write + + + LSLP_MEM_FORCE_PU + memories in digital core force no PD in sleep + 4 + 1 + read-write + + + ROM0_FORCE_PD + ROM force power down + 5 + 1 + read-write + + + ROM0_FORCE_PU + ROM force power up + 6 + 1 + read-write + + + INTER_RAM0_FORCE_PD + internal SRAM 0 force power down + 7 + 1 + read-write + + + INTER_RAM0_FORCE_PU + internal SRAM 0 force power up + 8 + 1 + read-write + + + INTER_RAM1_FORCE_PD + internal SRAM 1 force power down + 9 + 1 + read-write + + + INTER_RAM1_FORCE_PU + internal SRAM 1 force power up + 10 + 1 + read-write + + + INTER_RAM2_FORCE_PD + internal SRAM 2 force power down + 11 + 1 + read-write + + + INTER_RAM2_FORCE_PU + internal SRAM 2 force power up + 12 + 1 + read-write + + + INTER_RAM3_FORCE_PD + internal SRAM 3 force power down + 13 + 1 + read-write + + + INTER_RAM3_FORCE_PU + internal SRAM 3 force power up + 14 + 1 + read-write + + + INTER_RAM4_FORCE_PD + internal SRAM 4 force power down + 15 + 1 + read-write + + + INTER_RAM4_FORCE_PU + internal SRAM 4 force power up + 16 + 1 + read-write + + + WIFI_FORCE_PD + wifi force power down + 17 + 1 + read-write + + + WIFI_FORCE_PU + wifi force power up + 18 + 1 + read-write + + + DG_WRAP_FORCE_PD + digital core force power down + 19 + 1 + read-write + + + DG_WRAP_FORCE_PU + digital core force power up + 20 + 1 + read-write + + + ROM0_PD_EN + enable power down ROM in sleep + 24 + 1 + read-write + + + INTER_RAM0_PD_EN + enable power down internal SRAM 0 in sleep + 25 + 1 + read-write + + + INTER_RAM1_PD_EN + enable power down internal SRAM 1 in sleep + 26 + 1 + read-write + + + INTER_RAM2_PD_EN + enable power down internal SRAM 2 in sleep + 27 + 1 + read-write + + + INTER_RAM3_PD_EN + enable power down internal SRAM 3 in sleep + 28 + 1 + read-write + + + INTER_RAM4_PD_EN + enable power down internal SRAM 4 in sleep + 29 + 1 + read-write + + + WIFI_PD_EN + enable power down wifi in sleep + 30 + 1 + read-write + + + DG_WRAP_PD_EN + enable power down digital core in sleep + 31 + 1 + read-write + + + + + DIG_ISO + 0x88 + 0x20 + 0xAAAA5000 + + + FORCE_OFF + 7 + 1 + read-write + + + FORCE_ON + 8 + 1 + read-write + + + DG_PAD_AUTOHOLD + read only register to indicate digital pad auto-hold status + 9 + 1 + read-only + + + CLR_DG_PAD_AUTOHOLD + wtite only register to clear digital pad auto-hold + 10 + 1 + write-only + + + DG_PAD_AUTOHOLD_EN + digital pad enable auto-hold + 11 + 1 + read-write + + + DG_PAD_FORCE_NOISO + digital pad force no ISO + 12 + 1 + read-write + + + DG_PAD_FORCE_ISO + digital pad force ISO + 13 + 1 + read-write + + + DG_PAD_FORCE_UNHOLD + digital pad force un-hold + 14 + 1 + read-write + + + DG_PAD_FORCE_HOLD + digital pad force hold + 15 + 1 + read-write + + + ROM0_FORCE_ISO + ROM force ISO + 16 + 1 + read-write + + + ROM0_FORCE_NOISO + ROM force no ISO + 17 + 1 + read-write + + + INTER_RAM0_FORCE_ISO + internal SRAM 0 force ISO + 18 + 1 + read-write + + + INTER_RAM0_FORCE_NOISO + internal SRAM 0 force no ISO + 19 + 1 + read-write + + + INTER_RAM1_FORCE_ISO + internal SRAM 1 force ISO + 20 + 1 + read-write + + + INTER_RAM1_FORCE_NOISO + internal SRAM 1 force no ISO + 21 + 1 + read-write + + + INTER_RAM2_FORCE_ISO + internal SRAM 2 force ISO + 22 + 1 + read-write + + + INTER_RAM2_FORCE_NOISO + internal SRAM 2 force no ISO + 23 + 1 + read-write + + + INTER_RAM3_FORCE_ISO + internal SRAM 3 force ISO + 24 + 1 + read-write + + + INTER_RAM3_FORCE_NOISO + internal SRAM 3 force no ISO + 25 + 1 + read-write + + + INTER_RAM4_FORCE_ISO + internal SRAM 4 force ISO + 26 + 1 + read-write + + + INTER_RAM4_FORCE_NOISO + internal SRAM 4 force no ISO + 27 + 1 + read-write + + + WIFI_FORCE_ISO + wifi force ISO + 28 + 1 + read-write + + + WIFI_FORCE_NOISO + wifi force no ISO + 29 + 1 + read-write + + + DG_WRAP_FORCE_ISO + digital core force ISO + 30 + 1 + read-write + + + DG_WRAP_FORCE_NOISO + digital core force no ISO + 31 + 1 + read-write + + + + + WDTCONFIG0 + 0x8C + 0x20 + 0x00004C80 + + + WDT_PAUSE_IN_SLP + pause WDT in sleep + 7 + 1 + read-write + + + WDT_APPCPU_RESET_EN + enable WDT reset APP CPU + 8 + 1 + read-write + + + WDT_PROCPU_RESET_EN + enable WDT reset PRO CPU + 9 + 1 + read-write + + + WDT_FLASHBOOT_MOD_EN + enable WDT in flash boot + 10 + 1 + read-write + + + WDT_SYS_RESET_LENGTH + system reset counter length + 11 + 3 + read-write + + + WDT_CPU_RESET_LENGTH + CPU reset counter length + 14 + 3 + read-write + + + WDT_LEVEL_INT_EN + N/A + 17 + 1 + read-write + + + WDT_EDGE_INT_EN + N/A + 18 + 1 + read-write + + + WDT_STG3 + 1: interrupt stage en 2: CPU reset stage en 3: system reset stage en 4: RTC reset stage en + 19 + 3 + read-write + + + WDT_STG2 + 1: interrupt stage en 2: CPU reset stage en 3: system reset stage en 4: RTC reset stage en + 22 + 3 + read-write + + + WDT_STG1 + 1: interrupt stage en 2: CPU reset stage en 3: system reset stage en 4: RTC reset stage en + 25 + 3 + read-write + + + WDT_STG0 + 1: interrupt stage en 2: CPU reset stage en 3: system reset stage en 4: RTC reset stage en + 28 + 3 + read-write + + + WDT_EN + enable RTC WDT + 31 + 1 + read-write + + + + + WDTCONFIG1 + 0x90 + 0x20 + 0x0001F400 + + + WDT_STG0_HOLD + 0 + 32 + read-write + + + + + WDTCONFIG2 + 0x94 + 0x20 + 0x00013880 + + + WDT_STG1_HOLD + 0 + 32 + read-write + + + + + WDTCONFIG3 + 0x98 + 0x20 + 0x00000FFF + + + WDT_STG2_HOLD + 0 + 32 + read-write + + + + + WDTCONFIG4 + 0x9C + 0x20 + 0x00000FFF + + + WDT_STG3_HOLD + 0 + 32 + read-write + + + + + WDTFEED + 0xA0 + 0x20 + + + WDT_FEED + 31 + 1 + write-only + + + + + WDTWPROTECT + 0xA4 + 0x20 + 0x50D83AA1 + + + WDT_WKEY + 0 + 32 + read-write + + + + + TEST_MUX + 0xA8 + 0x20 + + + ENT_RTC + ENT_RTC + 29 + 1 + read-write + + + DTEST_RTC + DTEST_RTC + 30 + 2 + read-write + + + + + SW_CPU_STALL + 0xAC + 0x20 + + + SW_STALL_APPCPU_C1 + {reg_sw_stall_appcpu_c1[5:0] reg_sw_stall_appcpu_c0[1:0]} == 0x86 will stall APP CPU + 20 + 6 + read-write + + + SW_STALL_PROCPU_C1 + {reg_sw_stall_procpu_c1[5:0] reg_sw_stall_procpu_c0[1:0]} == 0x86 will stall PRO CPU + 26 + 6 + read-write + + + + + STORE4 + 0xB0 + 0x20 + + + SCRATCH4 + 32-bit general purpose retention register + 0 + 32 + read-write + + + + + STORE5 + 0xB4 + 0x20 + + + SCRATCH5 + 32-bit general purpose retention register + 0 + 32 + read-write + + + + + STORE6 + 0xB8 + 0x20 + + + SCRATCH6 + 32-bit general purpose retention register + 0 + 32 + read-write + + + + + STORE7 + 0xBC + 0x20 + + + SCRATCH7 + 32-bit general purpose retention register + 0 + 32 + read-write + + + + + LOW_POWER_ST + 0xC0 + 0x20 + + + LOW_POWER_DIAG0 + 0 + 32 + read-only + + + RDY_FOR_WAKEUP + 1 if RTC controller is ready to execute WAKE instruction, 0 otherwise + 19 + 1 + read-only + + + + + DIAG1 + 0xC4 + 0x20 + + + LOW_POWER_DIAG1 + 0 + 32 + read-only + + + + + HOLD_FORCE + 0xC8 + 0x20 + + + ADC1_HOLD_FORCE + 0 + 1 + read-write + + + ADC2_HOLD_FORCE + 1 + 1 + read-write + + + PDAC1_HOLD_FORCE + 2 + 1 + read-write + + + PDAC2_HOLD_FORCE + 3 + 1 + read-write + + + SENSE1_HOLD_FORCE + 4 + 1 + read-write + + + SENSE2_HOLD_FORCE + 5 + 1 + read-write + + + SENSE3_HOLD_FORCE + 6 + 1 + read-write + + + SENSE4_HOLD_FORCE + 7 + 1 + read-write + + + TOUCH_PAD0_HOLD_FORCE + 8 + 1 + read-write + + + TOUCH_PAD1_HOLD_FORCE + 9 + 1 + read-write + + + TOUCH_PAD2_HOLD_FORCE + 10 + 1 + read-write + + + TOUCH_PAD3_HOLD_FORCE + 11 + 1 + read-write + + + TOUCH_PAD4_HOLD_FORCE + 12 + 1 + read-write + + + TOUCH_PAD5_HOLD_FORCE + 13 + 1 + read-write + + + TOUCH_PAD6_HOLD_FORCE + 14 + 1 + read-write + + + TOUCH_PAD7_HOLD_FORCE + 15 + 1 + read-write + + + X32P_HOLD_FORCE + 16 + 1 + read-write + + + X32N_HOLD_FORCE + 17 + 1 + read-write + + + + + EXT_WAKEUP1 + 0xCC + 0x20 + + + SEL + Bitmap to select RTC pads for ext wakeup1 + 0 + 18 + read-write + + + STATUS_CLR + clear ext wakeup1 status + 18 + 1 + write-only + + + + + EXT_WAKEUP1_STATUS + 0xD0 + 0x20 + + + EXT_WAKEUP1_STATUS + ext wakeup1 status + 0 + 18 + read-only + + + + + BROWN_OUT + 0xD4 + 0x20 + 0x13FF0000 + + + RTC_MEM_PID_CONF + 0 + 8 + read-write + + + RTC_MEM_CRC_START + 8 + 1 + read-write + + + RTC_MEM_CRC_ADDR + 9 + 11 + read-write + + + CLOSE_FLASH_ENA + enable close flash when brown out happens + 14 + 1 + read-write + + + PD_RF_ENA + enable power down RF when brown out happens + 15 + 1 + read-write + + + RST_WAIT + brown out reset wait cycles + 16 + 10 + read-write + + + RTC_MEM_CRC_LEN + 20 + 11 + read-write + + + RST_ENA + enable brown out reset + 26 + 1 + read-write + + + DBROWN_OUT_THRES + brown out threshold + 27 + 3 + read-write + + + ENA + enable brown out + 30 + 1 + read-write + + + DET + brown out detect + 31 + 1 + read-only + + + RTC_MEM_CRC_FINISH + 31 + 1 + read-write + + + + + DATE + 0x13C + 0x20 + 0x01604280 + + + CNTL_DATE + 0 + 28 + read-write + + + + + + + RTCIO + Peripheral RTCIO + RTC_GPIO + 0x3FF48400 + + 0x0 + 0xCC + registers + + + + OUT + 0x0 + 0x20 + + + DATA + GPIO0~17 output value + 14 + 18 + read-write + + + + + OUT_W1TS + 0x4 + 0x20 + + + OUT_DATA_W1TS + GPIO0~17 output value write 1 to set + 14 + 18 + write-only + + + + + OUT_W1TC + 0x8 + 0x20 + + + OUT_DATA_W1TC + GPIO0~17 output value write 1 to clear + 14 + 18 + write-only + + + + + ENABLE + 0xC + 0x20 + + + ENABLE + GPIO0~17 output enable + 14 + 18 + read-write + + + + + ENABLE_W1TS + 0x10 + 0x20 + + + ENABLE_W1TS + GPIO0~17 output enable write 1 to set + 14 + 18 + write-only + + + + + ENABLE_W1TC + 0x14 + 0x20 + + + ENABLE_W1TC + GPIO0~17 output enable write 1 to clear + 14 + 18 + write-only + + + + + STATUS + 0x18 + 0x20 + + + INT + GPIO0~17 interrupt status + 14 + 18 + read-write + + + + + STATUS_W1TS + 0x1C + 0x20 + + + STATUS_INT_W1TS + GPIO0~17 interrupt status write 1 to set + 14 + 18 + write-only + + + + + STATUS_W1TC + 0x20 + 0x20 + + + STATUS_INT_W1TC + GPIO0~17 interrupt status write 1 to clear + 14 + 18 + write-only + + + + + IN + 0x24 + 0x20 + + + NEXT + GPIO0~17 input value + 14 + 18 + read-only + + + + + 18 + 0x4 + 0-17 + PIN%s + 0x28 + 0x20 + + + PAD_DRIVER + if set to 0: normal output if set to 1: open drain + 2 + 1 + read-write + + + INT_TYPE + if set to 0: GPIO interrupt disable if set to 1: rising edge trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger + 7 + 3 + read-write + + + WAKEUP_ENABLE + GPIO wake up enable only available in light sleep + 10 + 1 + read-write + + + + + RTC_DEBUG_SEL + 0x70 + 0x20 + + + DEBUG_SEL0 + 0 + 5 + read-write + + + DEBUG_SEL1 + 5 + 5 + read-write + + + DEBUG_SEL2 + 10 + 5 + read-write + + + DEBUG_SEL3 + 15 + 5 + read-write + + + DEBUG_SEL4 + 20 + 5 + read-write + + + DEBUG_12M_NO_GATING + 25 + 1 + read-write + + + + + DIG_PAD_HOLD + 0x74 + 0x20 + + + DIG_PAD_HOLD + select the digital pad hold value. + 0 + 32 + read-write + + + + + HALL_SENS + 0x78 + 0x20 + + + HALL_PHASE + Reverse phase of hall sensor + 30 + 1 + read-write + + + XPD_HALL + Power on hall sensor and connect to VP and VN + 31 + 1 + read-write + + + + + SENSOR_PADS + 0x7C + 0x20 + + + SENSE4_FUN_IE + the input enable of the pad + 4 + 1 + read-write + + + SENSE4_SLP_IE + the input enable of the pad in sleep status + 5 + 1 + read-write + + + SENSE4_SLP_SEL + the sleep status selection signal of the pad + 6 + 1 + read-write + + + SENSE4_FUN_SEL + the functional selection signal of the pad + 7 + 2 + read-write + + + SENSE3_FUN_IE + the input enable of the pad + 9 + 1 + read-write + + + SENSE3_SLP_IE + the input enable of the pad in sleep status + 10 + 1 + read-write + + + SENSE3_SLP_SEL + the sleep status selection signal of the pad + 11 + 1 + read-write + + + SENSE3_FUN_SEL + the functional selection signal of the pad + 12 + 2 + read-write + + + SENSE2_FUN_IE + the input enable of the pad + 14 + 1 + read-write + + + SENSE2_SLP_IE + the input enable of the pad in sleep status + 15 + 1 + read-write + + + SENSE2_SLP_SEL + the sleep status selection signal of the pad + 16 + 1 + read-write + + + SENSE2_FUN_SEL + the functional selection signal of the pad + 17 + 2 + read-write + + + SENSE1_FUN_IE + the input enable of the pad + 19 + 1 + read-write + + + SENSE1_SLP_IE + the input enable of the pad in sleep status + 20 + 1 + read-write + + + SENSE1_SLP_SEL + the sleep status selection signal of the pad + 21 + 1 + read-write + + + SENSE1_FUN_SEL + the functional selection signal of the pad + 22 + 2 + read-write + + + SENSE4_MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 24 + 1 + read-write + + + SENSE3_MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 25 + 1 + read-write + + + SENSE2_MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 26 + 1 + read-write + + + SENSE1_MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 27 + 1 + read-write + + + SENSE4_HOLD + hold the current value of the output when setting the hold to Ò1Ó + 28 + 1 + read-write + + + SENSE3_HOLD + hold the current value of the output when setting the hold to Ò1Ó + 29 + 1 + read-write + + + SENSE2_HOLD + hold the current value of the output when setting the hold to Ò1Ó + 30 + 1 + read-write + + + SENSE1_HOLD + hold the current value of the output when setting the hold to Ò1Ó + 31 + 1 + read-write + + + + + ADC_PAD + 0x80 + 0x20 + + + ADC2_FUN_IE + the input enable of the pad + 18 + 1 + read-write + + + ADC2_SLP_IE + the input enable of the pad in sleep status + 19 + 1 + read-write + + + ADC2_SLP_SEL + the sleep status selection signal of the pad + 20 + 1 + read-write + + + ADC2_FUN_SEL + the functional selection signal of the pad + 21 + 2 + read-write + + + ADC1_FUN_IE + the input enable of the pad + 23 + 1 + read-write + + + ADC1_SLP_IE + the input enable of the pad in sleep status + 24 + 1 + read-write + + + ADC1_SLP_SEL + the sleep status selection signal of the pad + 25 + 1 + read-write + + + ADC1_FUN_SEL + the functional selection signal of the pad + 26 + 2 + read-write + + + ADC2_MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 28 + 1 + read-write + + + ADC1_MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 29 + 1 + read-write + + + ADC2_HOLD + hold the current value of the output when setting the hold to Ò1Ó + 30 + 1 + read-write + + + ADC1_HOLD + hold the current value of the output when setting the hold to Ò1Ó + 31 + 1 + read-write + + + + + PAD_DAC1 + 0x84 + 0x20 + 0x80000000 + + + PDAC1_DAC_XPD_FORCE + Power on DAC1. Usually we need to tristate PDAC1 if we power on the DAC i.e. IE=0 OE=0 RDE=0 RUE=0 + 10 + 1 + read-write + + + PDAC1_FUN_IE + the input enable of the pad + 11 + 1 + read-write + + + PDAC1_SLP_OE + the output enable of the pad in sleep status + 12 + 1 + read-write + + + PDAC1_SLP_IE + the input enable of the pad in sleep status + 13 + 1 + read-write + + + PDAC1_SLP_SEL + the sleep status selection signal of the pad + 14 + 1 + read-write + + + PDAC1_FUN_SEL + the functional selection signal of the pad + 15 + 2 + read-write + + + PDAC1_MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 17 + 1 + read-write + + + PDAC1_XPD_DAC + Power on DAC1. Usually we need to tristate PDAC1 if we power on the DAC i.e. IE=0 OE=0 RDE=0 RUE=0 + 18 + 1 + read-write + + + PDAC1_DAC + PAD DAC1 control code. + 19 + 8 + read-write + + + PDAC1_RUE + the pull up enable of the pad + 27 + 1 + read-write + + + PDAC1_RDE + the pull down enable of the pad + 28 + 1 + read-write + + + PDAC1_HOLD + hold the current value of the output when setting the hold to Ò1Ó + 29 + 1 + read-write + + + PDAC1_DRV + the driver strength of the pad + 30 + 2 + read-write + + + + + PAD_DAC2 + 0x88 + 0x20 + 0x80000000 + + + PDAC2_DAC_XPD_FORCE + Power on DAC2. Usually we need to tristate PDAC2 if we power on the DAC i.e. IE=0 OE=0 RDE=0 RUE=0 + 10 + 1 + read-write + + + PDAC2_FUN_IE + the input enable of the pad + 11 + 1 + read-write + + + PDAC2_SLP_OE + the output enable of the pad in sleep status + 12 + 1 + read-write + + + PDAC2_SLP_IE + the input enable of the pad in sleep status + 13 + 1 + read-write + + + PDAC2_SLP_SEL + the sleep status selection signal of the pad + 14 + 1 + read-write + + + PDAC2_FUN_SEL + the functional selection signal of the pad + 15 + 2 + read-write + + + PDAC2_MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 17 + 1 + read-write + + + PDAC2_XPD_DAC + Power on DAC2. Usually we need to tristate PDAC1 if we power on the DAC i.e. IE=0 OE=0 RDE=0 RUE=0 + 18 + 1 + read-write + + + PDAC2_DAC + PAD DAC2 control code. + 19 + 8 + read-write + + + PDAC2_RUE + the pull up enable of the pad + 27 + 1 + read-write + + + PDAC2_RDE + the pull down enable of the pad + 28 + 1 + read-write + + + PDAC2_HOLD + hold the current value of the output when setting the hold to Ò1Ó + 29 + 1 + read-write + + + PDAC2_DRV + the driver strength of the pad + 30 + 2 + read-write + + + + + XTAL_32K_PAD + 0x8C + 0x20 + 0x84100010 + + + DBIAS_XTAL_32K + 32K XTAL self-bias reference control. + 1 + 2 + read-write + + + DRES_XTAL_32K + 32K XTAL resistor bias control. + 3 + 2 + read-write + + + X32P_FUN_IE + the input enable of the pad + 5 + 1 + read-write + + + X32P_SLP_OE + the output enable of the pad in sleep status + 6 + 1 + read-write + + + X32P_SLP_IE + the input enable of the pad in sleep status + 7 + 1 + read-write + + + X32P_SLP_SEL + the sleep status selection signal of the pad + 8 + 1 + read-write + + + X32P_FUN_SEL + the functional selection signal of the pad + 9 + 2 + read-write + + + X32N_FUN_IE + the input enable of the pad + 11 + 1 + read-write + + + X32N_SLP_OE + the output enable of the pad in sleep status + 12 + 1 + read-write + + + X32N_SLP_IE + the input enable of the pad in sleep status + 13 + 1 + read-write + + + X32N_SLP_SEL + the sleep status selection signal of the pad + 14 + 1 + read-write + + + X32N_FUN_SEL + the functional selection signal of the pad + 15 + 2 + read-write + + + X32P_MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 17 + 1 + read-write + + + X32N_MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 18 + 1 + read-write + + + XPD_XTAL_32K + Power up 32kHz crystal oscillator + 19 + 1 + read-write + + + DAC_XTAL_32K + 32K XTAL bias current DAC. + 20 + 2 + read-write + + + X32P_RUE + the pull up enable of the pad + 22 + 1 + read-write + + + X32P_RDE + the pull down enable of the pad + 23 + 1 + read-write + + + X32P_HOLD + hold the current value of the output when setting the hold to Ò1Ó + 24 + 1 + read-write + + + X32P_DRV + the driver strength of the pad + 25 + 2 + read-write + + + X32N_RUE + the pull up enable of the pad + 27 + 1 + read-write + + + X32N_RDE + the pull down enable of the pad + 28 + 1 + read-write + + + X32N_HOLD + hold the current value of the output when setting the hold to Ò1Ó + 29 + 1 + read-write + + + X32N_DRV + the driver strength of the pad + 30 + 2 + read-write + + + + + TOUCH_CFG + 0x90 + 0x20 + 0x66000000 + + + TOUCH_DCUR + touch sensor bias current. Should have option to tie with BIAS_SLEEP(When BIAS_SLEEP this setting is available + 23 + 2 + read-write + + + TOUCH_DRANGE + touch sensor saw wave voltage range. + 25 + 2 + read-write + + + TOUCH_DREFL + touch sensor saw wave bottom voltage. + 27 + 2 + read-write + + + TOUCH_DREFH + touch sensor saw wave top voltage. + 29 + 2 + read-write + + + TOUCH_XPD_BIAS + touch sensor bias power on. + 31 + 1 + read-write + + + + + TOUCH_PAD0 + 0x94 + 0x20 + 0x52000000 + + + TO_GPIO + connect the rtc pad input to digital pad input Ó0Ó is availbale GPIO4 + 12 + 1 + read-write + + + FUN_IE + the input enable of the pad + 13 + 1 + read-write + + + SLP_OE + the output enable of the pad in sleep status + 14 + 1 + read-write + + + SLP_IE + the input enable of the pad in sleep status + 15 + 1 + read-write + + + SLP_SEL + the sleep status selection signal of the pad + 16 + 1 + read-write + + + FUN_SEL + the functional selection signal of the pad + 17 + 2 + read-write + + + MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 19 + 1 + read-write + + + XPD + touch sensor power on. + 20 + 1 + read-write + + + TIE_OPT + default touch sensor tie option. 0: tie low 1: tie high. + 21 + 1 + read-write + + + START + start touch sensor. + 22 + 1 + read-write + + + DAC + touch sensor slope control. 3-bit for each touch panel default 100. + 23 + 3 + read-write + + + RUE + the pull up enable of the pad + 27 + 1 + read-write + + + RDE + the pull down enable of the pad + 28 + 1 + read-write + + + DRV + the driver strength of the pad + 29 + 2 + read-write + + + HOLD + hold the current value of the output when setting the hold to Ò1Ó + 31 + 1 + read-write + + + + + TOUCH_PAD1 + 0x98 + 0x20 + 0x4A000000 + + + TO_GPIO + connect the rtc pad input to digital pad input Ó0Ó is availbale.GPIO0 + 12 + 1 + read-write + + + FUN_IE + the input enable of the pad + 13 + 1 + read-write + + + SLP_OE + the output enable of the pad in sleep status + 14 + 1 + read-write + + + SLP_IE + the input enable of the pad in sleep status + 15 + 1 + read-write + + + SLP_SEL + the sleep status selection signal of the pad + 16 + 1 + read-write + + + FUN_SEL + the functional selection signal of the pad + 17 + 2 + read-write + + + MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 19 + 1 + read-write + + + XPD + touch sensor power on. + 20 + 1 + read-write + + + TIE_OPT + default touch sensor tie option. 0: tie low 1: tie high. + 21 + 1 + read-write + + + START + start touch sensor. + 22 + 1 + read-write + + + DAC + touch sensor slope control. 3-bit for each touch panel default 100. + 23 + 3 + read-write + + + RUE + the pull up enable of the pad + 27 + 1 + read-write + + + RDE + the pull down enable of the pad + 28 + 1 + read-write + + + DRV + the driver strength of the pad + 29 + 2 + read-write + + + HOLD + 31 + 1 + read-write + + + + + TOUCH_PAD2 + 0x9C + 0x20 + 0x52000000 + + + TO_GPIO + connect the rtc pad input to digital pad input Ó0Ó is availbale.GPIO2 + 12 + 1 + read-write + + + FUN_IE + the input enable of the pad + 13 + 1 + read-write + + + SLP_OE + the output enable of the pad in sleep status + 14 + 1 + read-write + + + SLP_IE + the input enable of the pad in sleep status + 15 + 1 + read-write + + + SLP_SEL + the sleep status selection signal of the pad + 16 + 1 + read-write + + + FUN_SEL + the functional selection signal of the pad + 17 + 2 + read-write + + + MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 19 + 1 + read-write + + + XPD + touch sensor power on. + 20 + 1 + read-write + + + TIE_OPT + default touch sensor tie option. 0: tie low 1: tie high. + 21 + 1 + read-write + + + START + start touch sensor. + 22 + 1 + read-write + + + DAC + touch sensor slope control. 3-bit for each touch panel default 100. + 23 + 3 + read-write + + + RUE + the pull up enable of the pad + 27 + 1 + read-write + + + RDE + the pull down enable of the pad + 28 + 1 + read-write + + + DRV + the driver strength of the pad + 29 + 2 + read-write + + + HOLD + hold the current value of the output when setting the hold to Ò1Ó + 31 + 1 + read-write + + + + + TOUCH_PAD3 + 0xA0 + 0x20 + 0x4A000000 + + + TO_GPIO + connect the rtc pad input to digital pad input Ó0Ó is availbale.MTDO + 12 + 1 + read-write + + + FUN_IE + the input enable of the pad + 13 + 1 + read-write + + + SLP_OE + the output enable of the pad in sleep status + 14 + 1 + read-write + + + SLP_IE + the input enable of the pad in sleep status + 15 + 1 + read-write + + + SLP_SEL + the sleep status selection signal of the pad + 16 + 1 + read-write + + + FUN_SEL + the functional selection signal of the pad + 17 + 2 + read-write + + + MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 19 + 1 + read-write + + + XPD + touch sensor power on. + 20 + 1 + read-write + + + TIE_OPT + default touch sensor tie option. 0: tie low 1: tie high. + 21 + 1 + read-write + + + START + start touch sensor. + 22 + 1 + read-write + + + DAC + touch sensor slope control. 3-bit for each touch panel default 100. + 23 + 3 + read-write + + + RUE + the pull up enable of the pad + 27 + 1 + read-write + + + RDE + the pull down enable of the pad + 28 + 1 + read-write + + + DRV + the driver strength of the pad + 29 + 2 + read-write + + + HOLD + hold the current value of the output when setting the hold to Ò1Ó + 31 + 1 + read-write + + + + + TOUCH_PAD4 + 0xA4 + 0x20 + 0x52000000 + + + TO_GPIO + connect the rtc pad input to digital pad input Ó0Ó is availbale.MTCK + 12 + 1 + read-write + + + FUN_IE + the input enable of the pad + 13 + 1 + read-write + + + SLP_OE + the output enable of the pad in sleep status + 14 + 1 + read-write + + + SLP_IE + the input enable of the pad in sleep status + 15 + 1 + read-write + + + SLP_SEL + the sleep status selection signal of the pad + 16 + 1 + read-write + + + FUN_SEL + the functional selection signal of the pad + 17 + 2 + read-write + + + MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 19 + 1 + read-write + + + XPD + touch sensor power on. + 20 + 1 + read-write + + + TIE_OPT + default touch sensor tie option. 0: tie low 1: tie high. + 21 + 1 + read-write + + + START + start touch sensor. + 22 + 1 + read-write + + + DAC + touch sensor slope control. 3-bit for each touch panel default 100. + 23 + 3 + read-write + + + RUE + the pull up enable of the pad + 27 + 1 + read-write + + + RDE + the pull down enable of the pad + 28 + 1 + read-write + + + DRV + the driver strength of the pad + 29 + 2 + read-write + + + HOLD + hold the current value of the output when setting the hold to Ò1Ó + 31 + 1 + read-write + + + + + TOUCH_PAD5 + 0xA8 + 0x20 + 0x52000000 + + + TO_GPIO + connect the rtc pad input to digital pad input Ó0Ó is availbale.MTDI + 12 + 1 + read-write + + + FUN_IE + the input enable of the pad + 13 + 1 + read-write + + + SLP_OE + the output enable of the pad in sleep status + 14 + 1 + read-write + + + SLP_IE + the input enable of the pad in sleep status + 15 + 1 + read-write + + + SLP_SEL + the sleep status selection signal of the pad + 16 + 1 + read-write + + + FUN_SEL + the functional selection signal of the pad + 17 + 2 + read-write + + + MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 19 + 1 + read-write + + + XPD + touch sensor power on. + 20 + 1 + read-write + + + TIE_OPT + default touch sensor tie option. 0: tie low 1: tie high. + 21 + 1 + read-write + + + START + start touch sensor. + 22 + 1 + read-write + + + DAC + touch sensor slope control. 3-bit for each touch panel default 100. + 23 + 3 + read-write + + + RUE + the pull up enable of the pad + 27 + 1 + read-write + + + RDE + the pull down enable of the pad + 28 + 1 + read-write + + + DRV + the driver strength of the pad + 29 + 2 + read-write + + + HOLD + hold the current value of the output when setting the hold to Ò1Ó + 31 + 1 + read-write + + + + + TOUCH_PAD6 + 0xAC + 0x20 + 0x4A000000 + + + TO_GPIO + connect the rtc pad input to digital pad input Ó0Ó is availbale.MTMS + 12 + 1 + read-write + + + FUN_IE + the input enable of the pad + 13 + 1 + read-write + + + SLP_OE + the output enable of the pad in sleep status + 14 + 1 + read-write + + + SLP_IE + the input enable of the pad in sleep status + 15 + 1 + read-write + + + SLP_SEL + the sleep status selection signal of the pad + 16 + 1 + read-write + + + FUN_SEL + the functional selection signal of the pad + 17 + 2 + read-write + + + MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 19 + 1 + read-write + + + XPD + touch sensor power on. + 20 + 1 + read-write + + + TIE_OPT + default touch sensor tie option. 0: tie low 1: tie high. + 21 + 1 + read-write + + + START + start touch sensor. + 22 + 1 + read-write + + + DAC + touch sensor slope control. 3-bit for each touch panel default 100. + 23 + 3 + read-write + + + RUE + the pull up enable of the pad + 27 + 1 + read-write + + + RDE + the pull down enable of the pad + 28 + 1 + read-write + + + DRV + the driver strength of the pad + 29 + 2 + read-write + + + HOLD + hold the current value of the output when setting the hold to Ò1Ó + 31 + 1 + read-write + + + + + TOUCH_PAD7 + 0xB0 + 0x20 + 0x42000000 + + + TO_GPIO + connect the rtc pad input to digital pad input Ó0Ó is availbale.GPIO27 + 12 + 1 + read-write + + + FUN_IE + the input enable of the pad + 13 + 1 + read-write + + + SLP_OE + the output enable of the pad in sleep status + 14 + 1 + read-write + + + SLP_IE + the input enable of the pad in sleep status + 15 + 1 + read-write + + + SLP_SEL + the sleep status selection signal of the pad + 16 + 1 + read-write + + + FUN_SEL + the functional selection signal of the pad + 17 + 2 + read-write + + + MUX_SEL + Ò1Ó select the digital function Ó0Óslection the rtc function + 19 + 1 + read-write + + + XPD + touch sensor power on. + 20 + 1 + read-write + + + TIE_OPT + default touch sensor tie option. 0: tie low 1: tie high. + 21 + 1 + read-write + + + START + start touch sensor. + 22 + 1 + read-write + + + DAC + touch sensor slope control. 3-bit for each touch panel default 100. + 23 + 3 + read-write + + + RUE + the pull up enable of the pad + 27 + 1 + read-write + + + RDE + the pull down enable of the pad + 28 + 1 + read-write + + + DRV + the driver strength of the pad + 29 + 2 + read-write + + + HOLD + hold the current value of the output when setting the hold to Ò1Ó + 31 + 1 + read-write + + + + + TOUCH_PAD8 + 0xB4 + 0x20 + 0x02000000 + + + TO_GPIO + connect the rtc pad input to digital pad input Ó0Ó is availbale + 19 + 1 + read-write + + + XPD + touch sensor power on. + 20 + 1 + read-write + + + TIE_OPT + default touch sensor tie option. 0: tie low 1: tie high. + 21 + 1 + read-write + + + START + start touch sensor. + 22 + 1 + read-write + + + DAC + touch sensor slope control. 3-bit for each touch panel default 100. + 23 + 3 + read-write + + + + + TOUCH_PAD9 + 0xB8 + 0x20 + 0x02000000 + + + TO_GPIO + connect the rtc pad input to digital pad input Ó0Ó is availbale + 19 + 1 + read-write + + + XPD + touch sensor power on. + 20 + 1 + read-write + + + TIE_OPT + default touch sensor tie option. 0: tie low 1: tie high. + 21 + 1 + read-write + + + START + start touch sensor. + 22 + 1 + read-write + + + DAC + touch sensor slope control. 3-bit for each touch panel default 100. + 23 + 3 + read-write + + + + + EXT_WAKEUP0 + 0xBC + 0x20 + + + SEL + select the wakeup source Ó0Ó select GPIO0 Ó1Ó select GPIO2 ...Ò17Ó select GPIO17 + 27 + 5 + read-write + + + + + XTL_EXT_CTR + 0xC0 + 0x20 + + + SEL + select the external xtl power source Ó0Ó select GPIO0 Ó1Ó select GPIO2 ...Ò17Ó select GPIO17 + 27 + 5 + read-write + + + + + SAR_I2C_IO + 0xC4 + 0x20 + + + SAR_DEBUG_BIT_SEL + 23 + 5 + read-write + + + SAR_I2C_SCL_SEL + Ò0Ó using TOUCH_PAD[0] as i2c clk Ò1Ó using TOUCH_PAD[2] as i2c clk + 28 + 2 + read-write + + + SAR_I2C_SDA_SEL + Ò0Ó using TOUCH_PAD[1] as i2c sda Ò1Ó using TOUCH_PAD[3] as i2c sda + 30 + 2 + read-write + + + + + DATE + 0xC8 + 0x20 + 0x01603160 + + + IO_DATE + date + 0 + 28 + read-write + + + + + + + RTC_I2C + Peripheral RTC_I2C + RTC_I2C + 0x3FF48C00 + + 0x0 + 0x3C + registers + + + + SCL_LOW_PERIOD + 0x0 + 0x20 + + + SCL_LOW_PERIOD + number of cycles that scl == 0 + 0 + 25 + read-write + + + + + CTRL + 0x4 + 0x20 + + + SDA_FORCE_OUT + SDA is push-pull (1) or open-drain (0) + 0 + 1 + read-write + + + SCL_FORCE_OUT + SCL is push-pull (1) or open-drain (0) + 1 + 1 + read-write + + + MS_MODE + Master (1) or slave (0) + 4 + 1 + read-write + + + TRANS_START + Force to generate start condition + 5 + 1 + read-write + + + TX_LSB_FIRST + Send LSB first + 6 + 1 + read-write + + + RX_LSB_FIRST + Receive LSB first + 7 + 1 + read-write + + + + + DEBUG_STATUS + 0x8 + 0x20 + + + ACK_VAL + The value of an acknowledge signal on the bus + 0 + 1 + read-write + + + SLAVE_RW + When working as a slave, the value of R/W bit received + 1 + 1 + read-write + + + TIMED_OUT + Transfer has timed out + 2 + 1 + read-write + + + ARB_LOST + When working as a master, lost control of I2C bus + 3 + 1 + read-write + + + BUS_BUSY + operation is in progress + 4 + 1 + read-write + + + SLAVE_ADDR_MATCH + When working as a slave, whether address was matched + 5 + 1 + read-write + + + BYTE_TRANS + 8 bit transmit done + 6 + 1 + read-write + + + MAIN_STATE + state of the main state machine + 25 + 3 + read-write + + + SCL_STATE + state of SCL state machine + 28 + 3 + read-write + + + + + TIMEOUT + 0xC + 0x20 + + + TIMEOUT + Maximum number of FAST_CLK cycles that the transmission can take + 0 + 20 + read-write + + + + + SLAVE_ADDR + 0x10 + 0x20 + + + SLAVE_ADDR + local slave address + 0 + 15 + read-write + + + _10BIT + Set if local slave address is 10-bit + 31 + 1 + read-write + + + + + DATA + 0x1C + 0x20 + + + INT_RAW + 0x20 + 0x20 + + + SLAVE_TRANS_COMPLETE_INT_RAW + Slave accepted 1 byte and address matched + 3 + 1 + read-write + + + ARBITRATION_LOST_INT_RAW + Master lost arbitration + 4 + 1 + read-write + + + MASTER_TRANS_COMPLETE_INT_RAW + 5 + 1 + read-write + + + TRANS_COMPLETE_INT_RAW + Stop condition has been detected interrupt raw status + 6 + 1 + read-write + + + TIME_OUT_INT_RAW + time out interrupt raw status + 7 + 1 + read-only + + + + + INT_CLR + 0x24 + 0x20 + + + SLAVE_TRANS_COMPLETE_INT_CLR + 4 + 1 + read-write + + + ARBITRATION_LOST_INT_CLR + 5 + 1 + read-write + + + MASTER_TRANS_COMPLETE_INT_CLR + 6 + 1 + read-write + + + TRANS_COMPLETE_INT_CLR + 7 + 1 + read-write + + + TIME_OUT_INT_CLR + 8 + 1 + write-only + + + + + INT_EN + 0x28 + 0x20 + + + INT_ST + 0x2C + 0x20 + + + SDA_DUTY + 0x30 + 0x20 + + + SDA_DUTY + Number of FAST_CLK cycles SDA will switch after falling edge of SCL + 0 + 20 + read-write + + + + + SCL_HIGH_PERIOD + 0x38 + 0x20 + + + SCL_HIGH_PERIOD + Number of FAST_CLK cycles for SCL to be high + 0 + 20 + read-write + + + + + SCL_START_PERIOD + 0x40 + 0x20 + + + SCL_START_PERIOD + Number of FAST_CLK cycles to wait before generating start condition + 0 + 20 + read-write + + + + + SCL_STOP_PERIOD + 0x44 + 0x20 + + + SCL_STOP_PERIOD + Number of FAST_CLK cycles to wait before generating stop condition + 0 + 20 + read-write + + + + + CMD + 0x48 + 0x20 + + + VAL + Command content + 0 + 14 + read-write + + + DONE + Bit is set by HW when command is done + 31 + 1 + read-write + + + + + + + SDMMC + SD/MMC Host Controller + SDHOST + 0x3FF68000 + + 0x0 + 0xA4 + registers + + + + CTRL + Control register + 0x0 + 0x20 + + + CONTROLLER_RESET + To reset controller, firmware should set this bit. This bit is auto-cleared after two AHB and two sdhost_cclk_in clock cycles. + 0 + 1 + read-write + + + FIFO_RESET + To reset FIFO, firmware should set bit to 1. This bit is auto-cleared after completion of reset operation. +Note: FIFO pointers will be out of reset after 2 cycles of system clocks in addition to synchronization delay (2 cycles of card clock), after the fifo_reset is cleared. + 1 + 1 + read-write + + + DMA_RESET + To reset DMA interface, firmware should set bit to 1. This bit is auto-cleared after two AHB clocks. + 2 + 1 + read-write + + + INT_ENABLE + Global interrupt enable/disable bit. 0: Disable; 1: Enable. + 4 + 1 + read-write + + + READ_WAIT + For sending read-wait to SDIO cards. + 6 + 1 + read-write + + + SEND_IRQ_RESPONSE + Bit automatically clears once response is sent. To wait for MMC card interrupts, host issues CMD40 and waits for interrupt response from MMC card(s). In the meantime, if host wants SD/MMC to exit waiting for interrupt state, it can set this bit, at which time SD/MMC command state-machine sends CMD40 response on bus and returns to idle state. + 7 + 1 + read-write + + + ABORT_READ_DATA + After a suspend-command is issued during a read-operation, software polls the card to find when the suspend-event occurred. Once the suspend-event has occurred, software sets the bit which will reset the data state machine that is waiting for the next block of data. This bit is automatically cleared once the data state machine is reset to idle. + 8 + 1 + read-write + + + SEND_CCSD + When set, SD/MMC sends CCSD to the CE-ATA device. Software sets this bit only if the current command is expecting CCS (that is, RW_BLK), and if interrupts are enabled for the CE-ATA device. Once the CCSD pattern is sent to the device, SD/MMC automatically clears the SDHOST_SEND_CCSD bit. It also sets the Command Done (CD) bit in the SDHOST_RINTSTS_REG register, and generates an interrupt for the host, in case the Command Done interrupt is not masked. +NOTE: Once the SDHOST_SEND_CCSD bit is set, it takes two card clock cycles to drive the CCSD on the CMD line. Due to this, within the boundary conditions the CCSD may be sent to the CE-ATA device, even if the device has signalled CCS. + 9 + 1 + read-write + + + SEND_AUTO_STOP_CCSD + Always Set SDHOST_SEND_AUTO_STOP_CCSD and SDHOST_SEND_CCSD bits together; SDHOST_SEND_AUTO_STOP_CCSD should not be set independently of send_ccsd. When set, SD/MMC automatically sends an internally-generated STOP command (CMD12) to the CE-ATA device. After sending this internally-generated STOP command, the Auto Command Done (ACD) bit in SDHOST_RINTSTS_REG is set and an interrupt is generated for the host, in case the ACD interrupt is not masked. After sending the Command Completion Signal Disable (CCSD), SD/MMC automatically clears the SDHOST_SEND_AUTO_STOP_CCSD bit. + 10 + 1 + read-write + + + CEATA_DEVICE_INTERRUPT_STATUS + Software should appropriately write to this bit after the power-on reset or any other reset to the CE-ATA device. After reset, the CE-ATA device's interrupt is usually disabled (nIEN = 1). If the host enables the CE-ATA device's interrupt, then software should set this bit. + 11 + 1 + read-write + + + + + CLKDIV + Clock divider configuration register + 0x8 + 0x20 + + + CLK_DIVIDER0 + Clock divider0 value. Clock divisor is 2*n, where n = 0 bypasses the divider (divisor of 1). For example, a value of 1 means divided by 2*1 = 2, a value of 0xFF means divided by 2*255 = 510, and so on. + 0 + 8 + read-write + + + CLK_DIVIDER1 + Clock divider1 value. Clock divisor is 2*n, where n = 0 bypasses the divider (divisor of 1). For example, a value of 1 means divided by 2*1 = 2, a value of 0xFF means divided by 2*255 = 510, and so on. + 8 + 8 + read-write + + + CLK_DIVIDER2 + Clock divider2 value. Clock divisor is 2*n, where n = 0 bypasses the divider (divisor of 1). For example, a value of 1 means divided by 2*1 = 2, a value of 0xFF means divided by 2*255 = 510, and so on. + 16 + 8 + read-write + + + CLK_DIVIDER3 + Clock divider3 value. Clock divisor is 2*n, where n = 0 bypasses the divider (divisor of 1). For example, a value of 1 means divided by 2*1 = 2, a value of 0xFF means divided by 2*255 = 510, and so on. + 24 + 8 + read-write + + + + + CLKSRC + Clock source selection register + 0xC + 0x20 + + + CLKSRC + Clock divider source for two SD cards is supported. Each card has two bits assigned to it. For example, bit[1:0] are assigned for card 0, bit[3:2] are assigned for card 1. Card 0 maps and internally routes clock divider[0:3] outputs to cclk_out[1:0] pins, depending on bit value. +00 : Clock divider 0; +01 : Clock divider 1; +10 : Clock divider 2; +11 : Clock divider 3. + 0 + 4 + read-write + + + + + CLKENA + Clock enable register + 0x10 + 0x20 + + + CCLK_ENABLE + Clock-enable control for two SD card clocks and one MMC card clock is supported. One bit per card. +0: Clock disabled; +1: Clock enabled. + 0 + 2 + read-write + + + LP_ENABLE + Disable clock when the card is in IDLE state. One bit per card. +0: clock disabled; +1: clock enabled. + 16 + 2 + read-write + + + + + TMOUT + Data and response timeout configuration register + 0x14 + 0x20 + 0xFFFFFF40 + + + RESPONSE_TIMEOUT + Response timeout value. Value is specified in terms of number of card output clocks, i.e., sdhost_cclk_out. + 0 + 8 + read-write + + + DATA_TIMEOUT + Value for card data read timeout. This value is also used for data starvation by host timeout. The timeout counter is started only after the card clock is stopped. This value is specified in number of card output clocks, i.e. sdhost_cclk_out of the selected card. +NOTE: The software timer should be used if the timeout value is in the order of 100 ms. In this case, read data timeout interrupt needs to be disabled. + 8 + 24 + read-write + + + + + CTYPE + Card bus width configuration register + 0x18 + 0x20 + + + CARD_WIDTH4 + One bit per card indicates if card is 1-bit or 4-bit mode. +0: 1-bit mode; +1: 4-bit mode. +Bit[1:0] correspond to card[1:0] respectively. + 0 + 2 + read-write + + + CARD_WIDTH8 + One bit per card indicates if card is in 8-bit mode. +0: Non 8-bit mode; +1: 8-bit mode. +Bit[17:16] correspond to card[1:0] respectively. + 16 + 2 + read-write + + + + + BLKSIZ + Card data block size configuration register + 0x1C + 0x20 + 0x00000200 + + + BLOCK_SIZE + Block size. + 0 + 16 + read-write + + + + + BYTCNT + Data transfer length configuration register + 0x20 + 0x20 + 0x00000200 + + + BYTE_COUNT + Number of bytes to be transferred, should be an integral multiple of Block Size for block transfers. For data transfers of undefined byte lengths, byte count should be set to 0. When byte count is set to 0, it is the responsibility of host to explicitly send stop/abort command to terminate data transfer. + 0 + 32 + read-write + + + + + INTMASK + SDIO interrupt mask register + 0x24 + 0x20 + + + INT_MASK + These bits used to mask unwanted interrupts. A value of 0 masks interrupt, and a value of 1 enables the interrupt. +Bit 15 (EBE): End-bit error/no CRC error; +Bit 14 (ACD): Auto command done; +Bit 13 (SBE/BCI): Rx Start Bit Error; +Bit 12 (HLE): Hardware locked write error; +Bit 11 (FRUN): FIFO underrun/overrun error; +Bit 10 (HTO): Data starvation-by-host timeout; +Bit 9 (DRTO): Data read timeout; +Bit 8 (RTO): Response timeout; +Bit 7 (DCRC): Data CRC error; +Bit 6 (RCRC): Response CRC error; +Bit 5 (RXDR): Receive FIFO data request; +Bit 4 (TXDR): Transmit FIFO data request; +Bit 3 (DTO): Data transfer over; +Bit 2 (CD): Command done; +Bit 1 (RE): Response error; +Bit 0 (CD): Card detect. + 0 + 16 + read-write + + + SDIO_INT_MASK + SDIO interrupt mask, one bit for each card. Bit[17:16] correspond to card[15:0] respectively. When masked, SDIO interrupt detection for that card is disabled. 0 masks an interrupt, and 1 enables an interrupt. + 16 + 2 + read-write + + + + + CMDARG + Command argument data register + 0x28 + 0x20 + + + CMDARG + Value indicates command argument to be passed to the card. + 0 + 32 + read-write + + + + + CMD + Command and boot configuration register + 0x2C + 0x20 + 0x20000000 + + + INDEX + Command index. + 0 + 6 + read-write + + + RESPONSE_EXPECT + 0: No response expected from card; 1: Response expected from card. + 6 + 1 + read-write + + + RESPONSE_LENGTH + 0: Short response expected from card; 1: Long response expected from card. + 7 + 1 + read-write + + + CHECK_RESPONSE_CRC + 0: Do not check; 1: Check response CRC. +Some of command responses do not return valid CRC bits. Software should disable CRC checks for those commands in order to disable CRC checking by controller. + 8 + 1 + read-write + + + DATA_EXPECTED + 0: No data transfer expected; 1: Data transfer expected. + 9 + 1 + read-write + + + READ_WRITE + 0: Read from card; 1: Write to card. +Don't care if no data is expected from card. + 10 + 1 + read-write + + + TRANSFER_MODE + Block data transfer command; 1: Stream data transfer command. +Don't care if no data expected. + 11 + 1 + read-write + + + SEND_AUTO_STOP + 0: No stop command is sent at the end of data transfer; 1: Send stop command at the end of data transfer. + 12 + 1 + read-write + + + WAIT_PRVDATA_COMPLETE + 0: Send command at once, even if previous data transfer has not completed; 1: Wait for previous data transfer to complete before sending Command. +The SDHOST_WAIT_PRVDATA_COMPLETE] = 0 option is typically used to query status of card during data transfer or to stop current data transfer. SDHOST_CARD_NUMBERr should be same as in previous command. + 13 + 1 + read-write + + + STOP_ABORT_CMD + 0: Neither stop nor abort command can stop current data transfer. If abort is sent to function-number currently selected or not in data-transfer mode, then bit should be set to 0; 1: Stop or abort command intended to stop current data transfer in progress. +When open-ended or predefined data transfer is in progress, and host issues stop or abort command to stop data transfer, bit should be set so that command/data state-machines of CIU can return correctly to idle state. + 14 + 1 + read-write + + + SEND_INITIALIZATION + 0: Do not send initialization sequence (80 clocks of 1) before sending this command; 1: Send initialization sequence before sending this command. +After powered on, 80 clocks must be sent to card for initialization before sending any commands to card. Bit should be set while sending first command to card so that controller will initialize clocks before sending command to card. + 15 + 1 + read-write + + + CARD_NUMBER + Card number in use. Represents physical slot number of card being accessed. In SD-only mode, up to two cards are supported. + 16 + 5 + read-write + + + UPDATE_CLOCK_REGISTERS_ONLY + 0: Normal command sequence; 1: Do not send commands, just update clock register value into card clock domain. +Following register values are transferred into card clock domain: CLKDIV, CLRSRC, and CLKENA. +Changes card clocks (change frequency, truncate off or on, and set low-frequency mode). This is provided in order to change clock frequency or stop clock without having to send command to cards. During normal command sequence, when sdhost_update_clock_registers_only = 0, following control registers are transferred from BIU to CIU: CMD, CMDARG, TMOUT, CTYPE, BLKSIZ, and BYTCNT. CIU uses new register values for new command sequence to card(s). When bit is set, there are no Command Done interrupts because no command is sent to SD_MMC_CEATA cards. + 21 + 1 + read-write + + + READ_CEATA_DEVICE + Read access flag. +0: Host is not performing read access (RW_REG or RW_BLK)towards CE-ATA device; +1: Host is performing read access (RW_REG or RW_BLK) towards CE-ATA device. +Software should set this bit to indicate that CE-ATA device is being accessed for read transfer. This bit is used to disable read data timeout indication while performing CE-ATA read transfers. Maximum value of I/O transmission delay can be no less than 10 seconds. SD/MMC should not indicate read data timeout while waiting for data from CE-ATA device. + 22 + 1 + read-write + + + CCS_EXPECTED + Expected Command Completion Signal (CCS) configuration. +0: Interrupts are not enabled in CE-ATA device (nIEN = 1 in ATA control register), or command does not expect CCS from device; +1: Interrupts are enabled in CE-ATA device (nIEN = 0), and RW_BLK command expects command completion signal from CE-ATA device. +If the command expects Command Completion Signal (CCS) from the CE-ATA device, the software should set this control bit. SD/MMC sets Data Transfer Over (DTO) bit in RINTSTS register and generates interrupt to host if Data Transfer Over interrupt is not masked. + 23 + 1 + read-write + + + USE_HOLE + Use Hold Register. +0: CMD and DATA sent to card bypassing HOLD Register; +1: CMD and DATA sent to card through the HOLD Register. + 29 + 1 + read-write + + + START_CMD + Start command. Once command is served by the CIU, this bit is automatically cleared. When this bit is set, host should not attempt to write to any command registers. If a write is attempted, hardware lock error is set in raw interrupt register. Once command is sent and a response is received from SD_MMC_CEATA cards, Command Done bit is set in the raw interrupt Register. + 31 + 1 + read-write + + + + + RESP0 + Response data register + 0x30 + 0x20 + + + RESPONSE0 + Bit[31:0] of response. + 0 + 32 + read-only + + + + + RESP1 + Long response data register + 0x34 + 0x20 + + + RESPONSE1 + Bit[63:32] of long response. + 0 + 32 + read-only + + + + + RESP2 + Long response data register + 0x38 + 0x20 + + + RESPONSE2 + Bit[95:64] of long response. + 0 + 32 + read-only + + + + + RESP3 + Long response data register + 0x3C + 0x20 + + + RESPONSE3 + Bit[127:96] of long response. + 0 + 32 + read-only + + + + + MINTSTS + Masked interrupt status register + 0x40 + 0x20 + + + INT_STATUS_MSK + Interrupt enabled only if corresponding bit in interrupt mask register is set. +Bit 15 (EBE): End-bit error/no CRC error; +Bit 14 (ACD): Auto command done; +Bit 13 (SBE/BCI): RX Start Bit Error; +Bit 12 (HLE): Hardware locked write error; +Bit 11 (FRUN): FIFO underrun/overrun error; +Bit 10 (HTO): Data starvation by host timeout (HTO); +Bit 9 (DTRO): Data read timeout; +Bit 8 (RTO): Response timeout; +Bit 7 (DCRC): Data CRC error; +Bit 6 (RCRC): Response CRC error; +Bit 5 (RXDR): Receive FIFO data request; +Bit 4 (TXDR): Transmit FIFO data request; +Bit 3 (DTO): Data transfer over; +Bit 2 (CD): Command done; +Bit 1 (RE): Response error; +Bit 0 (CD): Card detect. + 0 + 16 + read-only + + + SDIO_INTERRUPT_MSK + Interrupt from SDIO card, one bit for each card. Bit[17:16] correspond to card1 and card0, respectively. SDIO interrupt for card is enabled only if corresponding sdhost_sdio_int_mask bit is set in Interrupt mask register (Setting mask bit enables interrupt). + 16 + 2 + read-only + + + + + RINTSTS + Raw interrupt status register + 0x44 + 0x20 + + + INT_STATUS_RAW + Setting a bit clears the corresponding interrupt and writing 0 has no effect. Bits are logged regardless of interrupt mask status. +Bit 15 (EBE): End-bit error/no CRC error; +Bit 14 (ACD): Auto command done; +Bit 13 (SBE/BCI): RX Start Bit Error; +Bit 12 (HLE): Hardware locked write error; +Bit 11 (FRUN): FIFO underrun/overrun error; +Bit 10 (HTO): Data starvation by host timeout (HTO); +Bit 9 (DTRO): Data read timeout; +Bit 8 (RTO): Response timeout; +Bit 7 (DCRC): Data CRC error; +Bit 6 (RCRC): Response CRC error; +Bit 5 (RXDR): Receive FIFO data request; +Bit 4 (TXDR): Transmit FIFO data request; +Bit 3 (DTO): Data transfer over; +Bit 2 (CD): Command done; +Bit 1 (RE): Response error; +Bit 0 (CD): Card detect. + 0 + 16 + read-write + + + SDIO_INTERRUPT_RAW + Interrupt from SDIO card, one bit for each card. Bit[17:16] correspond to card1 and card0, respectively. Setting a bit clears the corresponding interrupt bit and writing 0 has no effect. +0: No SDIO interrupt from card; +1: SDIO interrupt from card. + 16 + 2 + read-write + + + + + STATUS + SD/MMC status register + 0x48 + 0x20 + 0x00000716 + + + FIFO_RX_WATERMARK + FIFO reached Receive watermark level, not qualified with data transfer. + 0 + 1 + read-only + + + FIFO_TX_WATERMARK + FIFO reached Transmit watermark level, not qualified with data transfer. + 1 + 1 + read-only + + + FIFO_EMPTY + FIFO is empty status. + 2 + 1 + read-only + + + FIFO_FULL + FIFO is full status. + 3 + 1 + read-only + + + COMMAND_FSM_STATES + Command FSM states. +0: Idle; +1: Send init sequence; +2: Send cmd start bit; +3: Send cmd tx bit; +4: Send cmd index + arg; +5: Send cmd crc7; +6: Send cmd end bit; +7: Receive resp start bit; +8: Receive resp IRQ response; +9: Receive resp tx bit; +10: Receive resp cmd idx; +11: Receive resp data; +12: Receive resp crc7; +13: Receive resp end bit; +14: Cmd path wait NCC; +15: Wait, cmd-to-response turnaround. + 4 + 4 + read-only + + + DATA_3_STATUS + Raw selected sdhost_card_data[3], checks whether card is present. +0: card not present; +1: card present. + 8 + 1 + read-only + + + DATA_BUSY + Inverted version of raw selected sdhost_card_data[0]. +0: Card data not busy; +1: Card data busy. + 9 + 1 + read-only + + + DATA_STATE_MC_BUSY + Data transmit or receive state-machine is busy. + 10 + 1 + read-only + + + RESPONSE_INDEX + Index of previous response, including any auto-stop sent by core. + 11 + 6 + read-only + + + FIFO_COUNT + FIFO count, number of filled locations in FIFO. + 17 + 13 + read-only + + + + + FIFOTH + FIFO configuration register + 0x4C + 0x20 + + + TX_WMARK + FIFO threshold watermark level when transmitting data to card. When FIFO data count is less than or equal to this number, DMA/FIFO request is raised. If Interrupt is enabled, then interrupt occurs. During end of packet, request or interrupt is generated, regardless of threshold programming.In non-DMA mode, when transmit FIFO threshold (TXDR) interrupt is enabled, then interrupt is generated instead of DMA request. During end of packet, on last interrupt, host is responsible for filling FIFO with only required remaining bytes (not before FIFO is full or after CIU completes data transfers, because FIFO may not be empty). In DMA mode, at end of packet, if last transfer is less than burst size, DMA controller does single cycles until required bytes are transferred. + 0 + 12 + read-write + + + RX_WMARK + FIFO threshold watermark level when receiving data to card.When FIFO data count reaches greater than this number , DMA/FIFO request is raised. During end of packet, request is generated regardless of threshold programming in order to complete any remaining data.In non-DMA mode, when receiver FIFO threshold (RXDR) interrupt is enabled, then interrupt is generated instead of DMA request.During end of packet, interrupt is not generated if threshold programming is larger than any remaining data. It is responsibility of host to read remaining bytes on seeing Data Transfer Done interrupt.In DMA mode, at end of packet, even if remaining bytes are less than threshold, DMA request does single transfers to flush out any remaining bytes before Data Transfer Done interrupt is set. + 16 + 11 + read-write + + + DMA_MULTIPLE_TRANSACTION_SIZE + Burst size of multiple transaction, should be programmed same as DMA controller multiple-transaction-size SDHOST_SRC/DEST_MSIZE. +000: 1-byte transfer; +001: 4-byte transfer; +010: 8-byte transfer; +011: 16-byte transfer; +100: 32-byte transfer; +101: 64-byte transfer; +110: 128-byte transfer; +111: 256-byte transfer. + 28 + 3 + read-write + + + + + CDETECT + Card detect register + 0x50 + 0x20 + + + CARD_DETECT_N + Value on sdhost_card_detect_n input ports (1 bit per card), read-only bits. 0 represents presence of card. Only NUM_CARDS number of bits are implemented. + 0 + 2 + read-only + + + + + WRTPRT + Card write protection (WP) status register + 0x54 + 0x20 + + + WRITE_PROTECT + Value on sdhost_card_write_prt input ports (1 bit per card). 1 represents write protection. Only NUM_CARDS number of bits are implemented. + 0 + 2 + read-only + + + + + TCBCNT + Transferred byte count register + 0x5C + 0x20 + + + TCBCNT + Number of bytes transferred by CIU unit to card. + 0 + 32 + read-only + + + + + TBBCNT + Transferred byte count register + 0x60 + 0x20 + + + TBBCNT + Number of bytes transferred between Host/DMA memory and BIU FIFO. + 0 + 32 + read-only + + + + + DEBNCE + Debounce filter time configuration register + 0x64 + 0x20 + + + DEBOUNCE_COUNT + Number of host clocks (clk) used by debounce filter logic. The typical debounce time is 5 \verb+~+ 25 ms to prevent the card instability when the card is inserted or removed. + 0 + 24 + read-write + + + + + USRID + User ID (scratchpad) register + 0x68 + 0x20 + + + USRID + User identification register, value set by user. Can also be used as a scratchpad register by user. + 0 + 32 + read-write + + + + + VERID + Version ID (scratchpad) register + 0x6C + 0x20 + 0x5432270A + + + VERSIONID + Hardware version register. Can also be read by fireware. + 0 + 32 + read-only + + + + + HCON + Hardware feature register + 0x70 + 0x20 + 0x03444CC3 + + + CARD_TYPE + Hardware support SDIO and MMC. + 0 + 1 + read-only + + + CARD_NUM + Support card number is 2. + 1 + 5 + read-only + + + BUS_TYPE + Register config is APB bus. + 6 + 1 + read-only + + + DATA_WIDTH + Regisger data widht is 32. + 7 + 3 + read-only + + + ADDR_WIDTH + Register address width is 32. + 10 + 6 + read-only + + + DMA_WIDTH + DMA data witdth is 32. + 18 + 3 + read-only + + + RAM_INDISE + Inside RAM in SDMMC module. + 21 + 1 + read-only + + + HOLD + Have a hold regiser in data path . + 22 + 1 + read-only + + + NUM_CLK_DIV + Have 4 clk divider in design . + 24 + 2 + read-only + + + + + UHS + UHS-1 register + 0x74 + 0x20 + + + DDR + DDR mode selecton,1 bit for each card. +0-Non-DDR mdoe. +1-DDR mdoe. + 16 + 2 + read-write + + + + + RST_N + Card reset register + 0x78 + 0x20 + 0x00000001 + + + CARD_RESET + Hardware reset. +1: Active mode; +0: Reset. +These bits cause the cards to enter pre-idle state, which requires them to be re-initialized. SDHOST_RST_CARD_RESET[0] should be set to 1'b0 to reset card0, SDHOST_RST_CARD_RESET[1] should be set to 1'b0 to reset card1. + 0 + 2 + read-write + + + + + BMOD + Burst mode transfer configuration register + 0x80 + 0x20 + + + SWR + Software Reset. When set, the DMA Controller resets all its internal registers. It is automatically cleared after one clock cycle. + 0 + 1 + read-write + + + FB + Fixed Burst. Controls whether the AHB Master interface performs fixed burst transfers or not. When set, the AHB will use only SINGLE, INCR4, INCR8 or INCR16 during start of normal burst transfers. When reset, the AHB will use SINGLE and INCR burst transfer operations. + 1 + 1 + read-write + + + DE + IDMAC Enable. When set, the IDMAC is enabled. + 7 + 1 + read-write + + + PBL + Programmable Burst Length. These bits indicate the maximum number of beats to be performed in one IDMAC???Internal DMA Control???transaction. The IDMAC will always attempt to burst as specified in PBL each time it starts a burst transfer on the host bus. The permissible values are 1, 4, 8, 16, 32, 64, 128 and 256. This value is the mirror of MSIZE of FIFOTH register. In order to change this value, write the required value to FIFOTH register. This is an encode value as follows: +000: 1-byte transfer; +001: 4-byte transfer; +010: 8-byte transfer; +011: 16-byte transfer; +100: 32-byte transfer; +101: 64-byte transfer; +110: 128-byte transfer; +111: 256-byte transfer. +PBL is a read-only value and is applicable only for data access, it does not apply to descriptor access. + 8 + 3 + read-write + + + + + PLDMND + Poll demand configuration register + 0x84 + 0x20 + + + PD + Poll Demand. If the OWNER bit of a descriptor is not set, the FSM goes to the Suspend state. The host needs to write any value into this register for the IDMAC FSM to resume normal descriptor fetch operation. This is a write only . + 0 + 32 + write-only + + + + + DBADDR + Descriptor base address register + 0x88 + 0x20 + + + DBADDR + Start of Descriptor List. Contains the base address of the First Descriptor. The LSB bits [1:0] are ignored and taken as all-zero by the IDMAC internally. Hence these LSB bits may be treated as read-only. + 0 + 32 + read-write + + + + + IDSTS + IDMAC status register + 0x8C + 0x20 + + + TI + Transmit Interrupt. Indicates that data transmission is finished for a descriptor. Writing 1 clears this bit. + 0 + 1 + read-write + + + RI + Receive Interrupt. Indicates the completion of data reception for a descriptor. Writing 1 clears this bit. + 1 + 1 + read-write + + + FBE + Fatal Bus Error Interrupt. Indicates that a Bus Error occurred (IDSTS[12:10]) . When this bit is set, the DMA disables all its bus accesses. Writing 1 clears this bit. + 2 + 1 + read-write + + + DU + Descriptor Unavailable Interrupt. This bit is set when the descriptor is unavailable due to OWNER bit = 0 (DES0[31] = 0). Writing 1 clears this bit. + 4 + 1 + read-write + + + CES + Card Error Summary. Indicates the status of the transaction to/from the card, also present in RINTSTS. Indicates the logical OR of the following bits: +EBE : End Bit Error; +RTO : Response Timeout/Boot Ack Timeout; +RCRC : Response CRC; +SBE : Start Bit Error; +DRTO : Data Read Timeout/BDS timeout; +DCRC : Data CRC for Receive; +RE : Response Error. +Writing 1 clears this bit. The abort condition of the IDMAC depends on the setting of this CES bit. If the CES bit is enabled, then the IDMAC aborts on a response error. + 5 + 1 + read-write + + + NIS + Normal Interrupt Summary. Logical OR of the following: IDSTS[0] : Transmit Interrupt, IDSTS[1] : Receive Interrupt. Only unmasked bits affect this bit. This is a sticky bit and must be cleared each time a corresponding bit that causes NIS to be set is cleared. Writing 1 clears this bit. + 8 + 1 + read-write + + + AIS + Abnormal Interrupt Summary. Logical OR of the following: IDSTS[2] : Fatal Bus Interrupt, IDSTS[4] : DU bit Interrupt. Only unmasked bits affect this bit. This is a sticky bit and must be cleared each time a corresponding bit that causes AIS to be set is cleared. Writing 1 clears this bit. + 9 + 1 + read-write + + + FBE_CODE + Fatal Bus Error Code. Indicates the type of error that caused a Bus Error. Valid only when the Fatal Bus Error bit IDSTS[2] is set. This field does not generate an interrupt. +001: Host Abort received during transmission; +010: Host Abort received during reception; +Others: Reserved. + 10 + 3 + read-write + + + FSM + DMAC FSM present state. +0: DMA_IDLE (idle state); +1: DMA_SUSPEND (suspend state); +2: DESC_RD (descriptor reading state); +3: DESC_CHK (descriptor checking state); +4: DMA_RD_REQ_WAIT (read-data request waiting state); +5: DMA_WR_REQ_WAIT (write-data request waiting state); +6: DMA_RD (data-read state); +7: DMA_WR (data-write state); +8: DESC_CLOSE (descriptor close state). + 13 + 4 + read-write + + + + + IDINTEN + IDMAC interrupt enable register + 0x90 + 0x20 + + + TI + Transmit Interrupt Enable. When set with Normal Interrupt Summary Enable, Transmit Interrupt is enabled. When reset, Transmit Interrupt is disabled. + 0 + 1 + read-write + + + RI + Receive Interrupt Enable. When set with Normal Interrupt Summary Enable, Receive Interrupt is enabled. When reset, Receive Interrupt is disabled. + 1 + 1 + read-write + + + FBE + Fatal Bus Error Enable. When set with Abnormal Interrupt Summary Enable, the Fatal Bus Error Interrupt is enabled. When reset, Fatal Bus Error Enable Interrupt is disabled. + 2 + 1 + read-write + + + DU + Descriptor Unavailable Interrupt. When set along with Abnormal Interrupt Summary Enable, the DU interrupt is enabled. + 4 + 1 + read-write + + + CES + Card Error summary Interrupt Enable. When set, it enables the Card Interrupt summary. + 5 + 1 + read-write + + + NI + Normal Interrupt Summary Enable. When set, a normal interrupt is enabled. When reset, a normal interrupt is disabled. This bit enables the following bits: +IDINTEN[0]: Transmit Interrupt; +IDINTEN[1]: Receive Interrupt. + 8 + 1 + read-write + + + AI + Abnormal Interrupt Summary Enable. When set, an abnormal interrupt is enabled. This bit enables the following bits: +IDINTEN[2]: Fatal Bus Error Interrupt; +IDINTEN[4]: DU Interrupt. + 9 + 1 + read-write + + + + + DSCADDR + Host descriptor address pointer + 0x94 + 0x20 + + + DSCADDR + Host Descriptor Address Pointer, updated by IDMAC during operation and cleared on reset. This register points to the start address of the current descriptor read by the IDMAC. + 0 + 32 + read-only + + + + + BUFADDR + Host buffer address pointer register + 0x98 + 0x20 + + + BUFADDR + Host Buffer Address Pointer, updated by IDMAC during operation and cleared on reset. This register points to the current Data Buffer Address being accessed by the IDMAC. + 0 + 32 + read-only + + + + + CARDTHRCTL + Card Threshold Control register + 0x100 + 0x20 + + + CARDRDTHREN + Card read threshold enable. +1'b0-Card read threshold disabled. +1'b1-Card read threshold enabled. + 0 + 1 + read-write + + + CARDCLRINTEN + Busy clear interrupt generation: +1'b0-Busy clear interrypt disabled. +1'b1-Busy clear interrypt enabled. + 1 + 1 + read-write + + + CARDWRTHREN + Applicable when HS400 mode is enabled. +1'b0-Card write Threshold disabled. +1'b1-Card write Threshold enabled. + 2 + 1 + read-write + + + CARDTHRESHOLD + The inside FIFO size is 512,This register is applicable when SDHOST_CARDERTHREN_REG is set to 1 or SDHOST_CARDRDTHREN_REG set to 1. + 16 + 16 + read-write + + + + + EMMCDDR + eMMC DDR register + 0x10C + 0x20 + + + HALFSTARTBIT + Control for start bit detection mechanism duration of start bit.Each bit refers to one slot.Set this bit to 1 for eMMC4.5 and above,set to 0 for SD applications.For eMMC4.5,start bit can be: +1'b0-Full cycle. +1'b1-less than one full cycle. + 0 + 2 + read-write + + + HS400_MODE + Set 1 to enable HS400 mode. + 31 + 1 + read-write + + + + + ENSHIFT + Enable Phase Shift register + 0x110 + 0x20 + + + ENABLE_SHIFT + Control for the amount of phase shift provided on the default enables in the design.Two bits assigned for each card. +2'b00-Default phase shift. +2'b01-Enables shifted to next immediate positive edge. +2'b10-Enables shifted to next immediate negative edge. +2'b11-Reserved. + 0 + 4 + read-write + + + + + BUFFIFO + CPU write and read transmit data by FIFO + 0x200 + 0x20 + + + BUFFIFO + CPU write and read transmit data by FIFO. This register points to the current Data FIFO . + 0 + 32 + read-write + + + + + CLK_EDGE_SEL + SDIO control register. + 0x800 + 0x20 + 0x00820200 + + + CCLKIN_EDGE_DRV_SEL + It's used to select the clock phase of the output signal from phase 0, phase 90, phase 180, phase 270. + 0 + 3 + read-write + + + CCLKIN_EDGE_SAM_SEL + It's used to select the clock phase of the input signal from phase 0, phase 90, phase 180, phase 270. + 3 + 3 + read-write + + + CCLKIN_EDGE_SLF_SEL + It's used to select the clock phase of the internal signal from phase 0, phase 90, phase 180, phase 270. + 6 + 3 + read-write + + + CCLLKIN_EDGE_H + The high level of the divider clock. The value should be smaller than CCLKIN_EDGE_L. + 9 + 4 + read-write + + + CCLLKIN_EDGE_L + The low level of the divider clock. The value should be larger than CCLKIN_EDGE_H. + 13 + 4 + read-write + + + CCLLKIN_EDGE_N + The value should be equal to CCLKIN_EDGE_L. + 17 + 4 + read-write + + + ESDIO_MODE + Enable esdio mode. + 21 + 1 + read-write + + + ESD_MODE + Enable esd mode. + 22 + 1 + read-write + + + CCLK_EN + Sdio clock enable + 23 + 1 + read-write + + + + + + + SENS + Peripheral SENS + SENS + 0x3FF48800 + + 0x0 + 0xA8 + registers + + + + SAR_READ_CTRL + 0x0 + 0x20 + 0x00070902 + + + SAR1_CLK_DIV + clock divider + 0 + 8 + read-write + + + SAR1_SAMPLE_CYCLE + sample cycles for SAR ADC1 + 8 + 8 + read-write + + + SAR1_SAMPLE_BIT + 00: for 9-bit width 01: for 10-bit width 10: for 11-bit width 11: for 12-bit width + 16 + 2 + read-write + + + SAR1_CLK_GATED + 18 + 1 + read-write + + + SAR1_SAMPLE_NUM + 19 + 8 + read-write + + + SAR1_DIG_FORCE + 1: SAR ADC1 controlled by DIG ADC1 CTRL 0: SAR ADC1 controlled by RTC ADC1 CTRL + 27 + 1 + read-write + + + SAR1_DATA_INV + Invert SAR ADC1 data + 28 + 1 + read-write + + + + + SAR_READ_STATUS1 + 0x4 + 0x20 + + + SAR1_READER_STATUS + 0 + 32 + read-only + + + + + SAR_MEAS_WAIT1 + 0x8 + 0x20 + 0x000A000A + + + SAR_AMP_WAIT1 + 0 + 16 + read-write + + + SAR_AMP_WAIT2 + 16 + 16 + read-write + + + + + SAR_MEAS_WAIT2 + 0xC + 0x20 + 0x0020000A + + + FORCE_XPD_SAR_SW + 0 + 1 + read-write + + + SAR_AMP_WAIT3 + 0 + 16 + read-write + + + FORCE_XPD_AMP + 16 + 2 + read-write + + + FORCE_XPD_SAR + 18 + 2 + read-write + + + SAR2_RSTB_WAIT + 20 + 8 + read-write + + + + + SAR_MEAS_CTRL + 0x10 + 0x20 + 0x0707338F + + + XPD_SAR_AMP_FSM + 0 + 4 + read-write + + + AMP_RST_FB_FSM + 4 + 4 + read-write + + + AMP_SHORT_REF_FSM + 8 + 4 + read-write + + + AMP_SHORT_REF_GND_FSM + 12 + 4 + read-write + + + XPD_SAR_FSM + 16 + 4 + read-write + + + SAR_RSTB_FSM + 20 + 4 + read-write + + + SAR2_XPD_WAIT + 24 + 8 + read-write + + + + + SAR_READ_STATUS2 + 0x14 + 0x20 + + + SAR2_READER_STATUS + 0 + 32 + read-only + + + + + ULP_CP_SLEEP_CYC0 + 0x18 + 0x20 + 0x000000C8 + + + SLEEP_CYCLES_S0 + sleep cycles for ULP-coprocessor timer + 0 + 32 + read-write + + + + + ULP_CP_SLEEP_CYC1 + 0x1C + 0x20 + 0x00000064 + + + SLEEP_CYCLES_S1 + 0 + 32 + read-write + + + + + ULP_CP_SLEEP_CYC2 + 0x20 + 0x20 + 0x00000032 + + + SLEEP_CYCLES_S2 + 0 + 32 + read-write + + + + + ULP_CP_SLEEP_CYC3 + 0x24 + 0x20 + 0x00000028 + + + SLEEP_CYCLES_S3 + 0 + 32 + read-write + + + + + ULP_CP_SLEEP_CYC4 + 0x28 + 0x20 + 0x00000014 + + + SLEEP_CYCLES_S4 + 0 + 32 + read-write + + + + + SAR_START_FORCE + 0x2C + 0x20 + 0x0000000F + + + SAR1_BIT_WIDTH + 00: 9 bit 01: 10 bits 10: 11bits 11: 12bits + 0 + 2 + read-write + + + SAR2_BIT_WIDTH + 00: 9 bit 01: 10 bits 10: 11bits 11: 12bits + 2 + 2 + read-write + + + SAR2_EN_TEST + SAR2_EN_TEST only active when reg_sar2_dig_force = 0 + 4 + 1 + read-write + + + SAR2_PWDET_CCT + SAR2_PWDET_CCT PA power detector capacitance tuning. + 5 + 3 + read-write + + + ULP_CP_FORCE_START_TOP + 1: ULP-coprocessor is started by SW 0: ULP-coprocessor is started by timer + 8 + 1 + read-write + + + ULP_CP_START_TOP + Write 1 to start ULP-coprocessor only active when reg_ulp_cp_force_start_top = 1 + 9 + 1 + read-write + + + SARCLK_EN + 10 + 1 + read-write + + + PC_INIT + initialized PC for ULP-coprocessor + 11 + 11 + read-write + + + SAR2_STOP + stop SAR ADC2 conversion + 22 + 1 + read-write + + + SAR1_STOP + stop SAR ADC1 conversion + 23 + 1 + read-write + + + SAR2_PWDET_EN + N/A + 24 + 1 + read-write + + + + + SAR_MEM_WR_CTRL + 0x30 + 0x20 + 0x00100200 + + + MEM_WR_ADDR_INIT + 0 + 11 + read-write + + + MEM_WR_ADDR_SIZE + 11 + 11 + read-write + + + RTC_MEM_WR_OFFST_CLR + 22 + 1 + write-only + + + + + SAR_ATTEN1 + 0x34 + 0x20 + 0xFFFFFFFF + + + SAR1_ATTEN + 2-bit attenuation for each pad 11:1dB 10:6dB 01:3dB 00:0dB + 0 + 32 + read-write + + + + + SAR_ATTEN2 + 0x38 + 0x20 + 0xFFFFFFFF + + + SAR2_ATTEN + 2-bit attenuation for each pad 11:1dB 10:6dB 01:3dB 00:0dB + 0 + 32 + read-write + + + + + SAR_SLAVE_ADDR1 + 0x3C + 0x20 + + + I2C_SLAVE_ADDR1 + 0 + 11 + read-write + + + I2C_SLAVE_ADDR0 + 11 + 11 + read-write + + + MEAS_STATUS + 22 + 8 + read-only + + + + + SAR_SLAVE_ADDR2 + 0x40 + 0x20 + + + I2C_SLAVE_ADDR3 + 0 + 11 + read-write + + + I2C_SLAVE_ADDR2 + 11 + 11 + read-write + + + + + SAR_SLAVE_ADDR3 + 0x44 + 0x20 + + + I2C_SLAVE_ADDR5 + 0 + 11 + read-write + + + I2C_SLAVE_ADDR4 + 11 + 11 + read-write + + + TSENS_OUT + temperature sensor data out + 22 + 8 + read-only + + + TSENS_RDY_OUT + indicate temperature sensor out ready + 30 + 1 + read-only + + + + + SAR_SLAVE_ADDR4 + 0x48 + 0x20 + + + I2C_SLAVE_ADDR7 + 0 + 11 + read-write + + + I2C_SLAVE_ADDR6 + 11 + 11 + read-write + + + I2C_RDATA + I2C read data + 22 + 8 + read-only + + + I2C_DONE + indicate I2C done + 30 + 1 + read-only + + + + + SAR_TSENS_CTRL + 0x4C + 0x20 + 0x00066002 + + + TSENS_XPD_WAIT + 0 + 12 + read-write + + + TSENS_XPD_FORCE + 12 + 1 + read-write + + + TSENS_CLK_INV + 13 + 1 + read-write + + + TSENS_CLK_GATED + 14 + 1 + read-write + + + TSENS_IN_INV + invert temperature sensor data + 15 + 1 + read-write + + + TSENS_CLK_DIV + temperature sensor clock divider + 16 + 8 + read-write + + + TSENS_POWER_UP + temperature sensor power up + 24 + 1 + read-write + + + TSENS_POWER_UP_FORCE + 1: dump out & power up controlled by SW 0: by FSM + 25 + 1 + read-write + + + TSENS_DUMP_OUT + temperature sensor dump out only active when reg_tsens_power_up_force = 1 + 26 + 1 + read-write + + + + + SAR_I2C_CTRL + 0x50 + 0x20 + + + SAR_I2C_CTRL + I2C control data only active when reg_sar_i2c_start_force = 1 + 0 + 28 + read-write + + + SAR_I2C_START + start I2C only active when reg_sar_i2c_start_force = 1 + 28 + 1 + read-write + + + SAR_I2C_START_FORCE + 1: I2C started by SW 0: I2C started by FSM + 29 + 1 + read-write + + + + + SAR_MEAS_START1 + 0x54 + 0x20 + + + MEAS1_DATA_SAR + SAR ADC1 data + 0 + 16 + read-only + + + MEAS1_DONE_SAR + SAR ADC1 conversion done indication + 16 + 1 + read-only + + + MEAS1_START_SAR + SAR ADC1 controller (in RTC) starts conversion only active when reg_meas1_start_force = 1 + 17 + 1 + read-write + + + MEAS1_START_FORCE + 1: SAR ADC1 controller (in RTC) is started by SW 0: SAR ADC1 controller is started by ULP-coprocessor + 18 + 1 + read-write + + + SAR1_EN_PAD + SAR ADC1 pad enable bitmap only active when reg_sar1_en_pad_force = 1 + 19 + 12 + read-write + + + SAR1_EN_PAD_FORCE + 1: SAR ADC1 pad enable bitmap is controlled by SW 0: SAR ADC1 pad enable bitmap is controlled by ULP-coprocessor + 31 + 1 + read-write + + + + + SAR_TOUCH_CTRL1 + 0x58 + 0x20 + 0x02041000 + + + TOUCH_MEAS_DELAY + the meas length (in 8MHz) + 0 + 16 + read-write + + + TOUCH_XPD_WAIT + the waiting cycles (in 8MHz) between TOUCH_START and TOUCH_XPD + 16 + 8 + read-write + + + TOUCH_OUT_SEL + 1: when the counter is greater then the threshold the touch pad is considered as "touched" 0: when the counter is less than the threshold the touch pad is considered as "touched" + 24 + 1 + read-write + + + TOUCH_OUT_1EN + 1: wakeup interrupt is generated if SET1 is "touched" 0: wakeup interrupt is generated only if SET1 & SET2 is both "touched" + 25 + 1 + read-write + + + XPD_HALL_FORCE + 1: XPD HALL is controlled by SW. 0: XPD HALL is controlled by FSM in ULP-coprocessor + 26 + 1 + read-write + + + HALL_PHASE_FORCE + 1: HALL PHASE is controlled by SW 0: HALL PHASE is controlled by FSM in ULP-coprocessor + 27 + 1 + read-write + + + + + SAR_TOUCH_THRES1 + 0x5C + 0x20 + + + TOUCH_OUT_TH1 + the threshold for touch pad 1 + 0 + 16 + read-write + + + TOUCH_OUT_TH0 + the threshold for touch pad 0 + 16 + 16 + read-write + + + + + SAR_TOUCH_THRES2 + 0x60 + 0x20 + + + TOUCH_OUT_TH3 + the threshold for touch pad 3 + 0 + 16 + read-write + + + TOUCH_OUT_TH2 + the threshold for touch pad 2 + 16 + 16 + read-write + + + + + SAR_TOUCH_THRES3 + 0x64 + 0x20 + + + TOUCH_OUT_TH5 + the threshold for touch pad 5 + 0 + 16 + read-write + + + TOUCH_OUT_TH4 + the threshold for touch pad 4 + 16 + 16 + read-write + + + + + SAR_TOUCH_THRES4 + 0x68 + 0x20 + + + TOUCH_OUT_TH7 + the threshold for touch pad 7 + 0 + 16 + read-write + + + TOUCH_OUT_TH6 + the threshold for touch pad 6 + 16 + 16 + read-write + + + + + SAR_TOUCH_THRES5 + 0x6C + 0x20 + + + TOUCH_OUT_TH9 + the threshold for touch pad 9 + 0 + 16 + read-write + + + TOUCH_OUT_TH8 + the threshold for touch pad 8 + 16 + 16 + read-write + + + + + SAR_TOUCH_OUT1 + 0x70 + 0x20 + + + TOUCH_MEAS_OUT1 + the counter for touch pad 1 + 0 + 16 + read-only + + + TOUCH_MEAS_OUT0 + the counter for touch pad 0 + 16 + 16 + read-only + + + + + SAR_TOUCH_OUT2 + 0x74 + 0x20 + + + TOUCH_MEAS_OUT3 + the counter for touch pad 3 + 0 + 16 + read-only + + + TOUCH_MEAS_OUT2 + the counter for touch pad 2 + 16 + 16 + read-only + + + + + SAR_TOUCH_OUT3 + 0x78 + 0x20 + + + TOUCH_MEAS_OUT5 + the counter for touch pad 5 + 0 + 16 + read-only + + + TOUCH_MEAS_OUT4 + the counter for touch pad 4 + 16 + 16 + read-only + + + + + SAR_TOUCH_OUT4 + 0x7C + 0x20 + + + TOUCH_MEAS_OUT7 + the counter for touch pad 7 + 0 + 16 + read-only + + + TOUCH_MEAS_OUT6 + the counter for touch pad 6 + 16 + 16 + read-only + + + + + SAR_TOUCH_OUT5 + 0x80 + 0x20 + + + TOUCH_MEAS_OUT9 + the counter for touch pad 9 + 0 + 16 + read-only + + + TOUCH_MEAS_OUT8 + the counter for touch pad 8 + 16 + 16 + read-only + + + + + SAR_TOUCH_CTRL2 + 0x84 + 0x20 + 0x00400800 + + + TOUCH_MEAS_EN + 10-bit register to indicate which pads are "touched" + 0 + 10 + read-only + + + TOUCH_MEAS_DONE + fsm set 1 to indicate touch touch meas is done + 10 + 1 + read-only + + + TOUCH_START_FSM_EN + 1: TOUCH_START & TOUCH_XPD is controlled by touch fsm 0: TOUCH_START & TOUCH_XPD is controlled by registers + 11 + 1 + read-write + + + TOUCH_START_EN + 1: start touch fsm valid when reg_touch_start_force is set + 12 + 1 + read-write + + + TOUCH_START_FORCE + 1: to start touch fsm by SW 0: to start touch fsm by timer + 13 + 1 + read-write + + + TOUCH_SLEEP_CYCLES + sleep cycles for timer + 14 + 16 + read-write + + + TOUCH_MEAS_EN_CLR + to clear reg_touch_meas_en + 30 + 1 + write-only + + + + + SAR_TOUCH_ENABLE + 0x8C + 0x20 + 0x3FFFFFFF + + + TOUCH_PAD_WORKEN + Bitmap defining the working set during the measurement. + 0 + 10 + read-write + + + TOUCH_PAD_OUTEN2 + Bitmap defining SET2 for generating wakeup interrupt. SET2 is "touched" only if at least one of touch pad in SET2 is "touched". + 10 + 10 + read-write + + + TOUCH_PAD_OUTEN1 + Bitmap defining SET1 for generating wakeup interrupt. SET1 is "touched" only if at least one of touch pad in SET1 is "touched". + 20 + 10 + read-write + + + + + SAR_READ_CTRL2 + 0x90 + 0x20 + 0x00070902 + + + SAR2_CLK_DIV + clock divider + 0 + 8 + read-write + + + SAR2_SAMPLE_CYCLE + sample cycles for SAR ADC2 + 8 + 8 + read-write + + + SAR2_SAMPLE_BIT + 00: for 9-bit width 01: for 10-bit width 10: for 11-bit width 11: for 12-bit width + 16 + 2 + read-write + + + SAR2_CLK_GATED + 18 + 1 + read-write + + + SAR2_SAMPLE_NUM + 19 + 8 + read-write + + + SAR2_PWDET_FORCE + 27 + 1 + read-write + + + SAR2_DIG_FORCE + 1: SAR ADC2 controlled by DIG ADC2 CTRL or PWDET CTRL 0: SAR ADC2 controlled by RTC ADC2 CTRL + 28 + 1 + read-write + + + SAR2_DATA_INV + Invert SAR ADC2 data + 29 + 1 + read-write + + + + + SAR_MEAS_START2 + 0x94 + 0x20 + + + MEAS2_DATA_SAR + SAR ADC2 data + 0 + 16 + read-only + + + MEAS2_DONE_SAR + SAR ADC2 conversion done indication + 16 + 1 + read-only + + + MEAS2_START_SAR + SAR ADC2 controller (in RTC) starts conversion only active when reg_meas2_start_force = 1 + 17 + 1 + read-write + + + MEAS2_START_FORCE + 1: SAR ADC2 controller (in RTC) is started by SW 0: SAR ADC2 controller is started by ULP-coprocessor + 18 + 1 + read-write + + + SAR2_EN_PAD + SAR ADC2 pad enable bitmap only active when reg_sar2_en_pad_force = 1 + 19 + 12 + read-write + + + SAR2_EN_PAD_FORCE + 1: SAR ADC2 pad enable bitmap is controlled by SW 0: SAR ADC2 pad enable bitmap is controlled by ULP-coprocessor + 31 + 1 + read-write + + + + + SAR_DAC_CTRL1 + 0x98 + 0x20 + + + SW_FSTEP + frequency step for CW generator can be used to adjust the frequency + 0 + 16 + read-write + + + SW_TONE_EN + 1: enable CW generator 0: disable CW generator + 16 + 1 + read-write + + + DEBUG_BIT_SEL + 17 + 5 + read-write + + + DAC_DIG_FORCE + 1: DAC1 & DAC2 use DMA 0: DAC1 & DAC2 do not use DMA + 22 + 1 + read-write + + + DAC_CLK_FORCE_LOW + 1: force PDAC_CLK to low + 23 + 1 + read-write + + + DAC_CLK_FORCE_HIGH + 1: force PDAC_CLK to high + 24 + 1 + read-write + + + DAC_CLK_INV + 1: invert PDAC_CLK + 25 + 1 + read-write + + + + + SAR_DAC_CTRL2 + 0x9C + 0x20 + 0x03000000 + + + DAC_DC1 + DC offset for DAC1 CW generator + 0 + 8 + read-write + + + DAC_DC2 + DC offset for DAC2 CW generator + 8 + 8 + read-write + + + DAC_SCALE1 + 00: no scale 01: scale to 1/2 10: scale to 1/4 scale to 1/8 + 16 + 2 + read-write + + + DAC_SCALE2 + 00: no scale 01: scale to 1/2 10: scale to 1/4 scale to 1/8 + 18 + 2 + read-write + + + DAC_INV1 + 00: do not invert any bits 01: invert all bits 10: invert MSB 11: invert all bits except MSB + 20 + 2 + read-write + + + DAC_INV2 + 00: do not invert any bits 01: invert all bits 10: invert MSB 11: invert all bits except MSB + 22 + 2 + read-write + + + DAC_CW_EN1 + 1: to select CW generator as source to PDAC1_DAC[7:0] 0: to select register reg_pdac1_dac[7:0] as source to PDAC1_DAC[7:0] + 24 + 1 + read-write + + + DAC_CW_EN2 + 1: to select CW generator as source to PDAC2_DAC[7:0] 0: to select register reg_pdac2_dac[7:0] as source to PDAC2_DAC[7:0] + 25 + 1 + read-write + + + + + SAR_MEAS_CTRL2 + 0xA0 + 0x20 + 0x00000003 + + + SAR1_DAC_XPD_FSM + 0 + 4 + read-write + + + SAR1_DAC_XPD_FSM_IDLE + 4 + 1 + read-write + + + XPD_SAR_AMP_FSM_IDLE + 5 + 1 + read-write + + + AMP_RST_FB_FSM_IDLE + 6 + 1 + read-write + + + AMP_SHORT_REF_FSM_IDLE + 7 + 1 + read-write + + + AMP_SHORT_REF_GND_FSM_IDLE + 8 + 1 + read-write + + + XPD_SAR_FSM_IDLE + 9 + 1 + read-write + + + SAR_RSTB_FSM_IDLE + 10 + 1 + read-write + + + SAR2_RSTB_FORCE + 11 + 2 + read-write + + + AMP_RST_FB_FORCE + 13 + 2 + read-write + + + AMP_SHORT_REF_FORCE + 15 + 2 + read-write + + + AMP_SHORT_REF_GND_FORCE + 17 + 2 + read-write + + + + + SAR_NOUSE + 0xF8 + 0x20 + + + SAR_NOUSE + 0 + 32 + read-write + + + + + SARDATE + 0xFC + 0x20 + 0x01605180 + + + SAR_DATE + 0 + 28 + read-write + + + + + + + SHA + SHA (Secure Hash Algorithm) Accelerator + SHA + 0x3FF03000 + + 0x0 + 0xC0 + registers + + + + 32 + 0x4 + TEXT_%s + 0x0 + 0x20 + + + TEXT + SHA Message block and hash result register. + 0 + 8 + read-write + + + + + SHA1_START + 0x80 + 0x20 + + + SHA1_START + Write 1 to start an SHA-1 operation on the first message block. + 0 + 1 + write-only + + + + + SHA1_CONTINUE + 0x80 + 0x20 + + + SHA1_CONTINUE + Write 1 to continue the SHA-1 operation with subsequent blocks. + 0 + 1 + write-only + + + + + SHA1_LOAD + 0x88 + 0x20 + + + SHA1_LOAD + Write 1 to finish the SHA-1 operation to calculate the final message hash. + 0 + 1 + write-only + + + + + SHA1_BUSY + 0x8C + 0x20 + + + SHA1_BUSY + SHA-1 operation status: 1 if the SHA accelerator is processing data, 0 if it is idle. + 0 + 1 + write-only + + + + + SHA256_START + 0x90 + 0x20 + + + SHA256_START + Write 1 to start an SHA-256 operation on the first message block. + 0 + 1 + write-only + + + + + SHA256_LOAD + 0x90 + 0x20 + + + SHA256_LOAD + Write 1 to finish the SHA-256 operation to calculate the final message hash. + 0 + 1 + write-only + + + + + SHA256_CONTINUE + 0x94 + 0x20 + + + SHA256_CONTINUE + Write 1 to continue the SHA-256 operation with subsequent blocks. + 0 + 1 + write-only + + + + + SHA256_BUSY + 0x9C + 0x20 + + + SHA256_BUSY + SHA-256 operation status: 1 if the SHA accelerator is processing data, 0 if it is idle. + 0 + 1 + read-only + + + + + SHA384_START + 0xA0 + 0x20 + + + SHA384_START + Write 1 to start an SHA-384 operation on the first message block. + 0 + 1 + write-only + + + + + SHA384_CONTINUE + 0xA4 + 0x20 + + + SHA384_CONTINUE + Write 1 to continue the SHA-384 operation with subsequent blocks. + 0 + 1 + write-only + + + + + SHA384_LOAD + 0xA8 + 0x20 + + + SHA384_LOAD + Write 1 to finish the SHA-384 operation to calculate the final message hash. + 0 + 1 + write-only + + + + + SHA384_BUSY + 0xAC + 0x20 + + + SHA384_BUSY + SHA-384 operation status: 1 if the SHA accelerator is processing data, 0 if it is idle. + 0 + 1 + read-only + + + + + SHA512_START + 0xB0 + 0x20 + + + SHA512_START + Write 1 to start an SHA-512 operation on the first message block. + 0 + 1 + write-only + + + + + SHA512_CONTINUE + 0xB4 + 0x20 + + + SHA512_CONTINUE + Write 1 to continue the SHA-512 operation with subsequent blocks. + 0 + 1 + write-only + + + + + SHA512_LOAD + 0xB8 + 0x20 + + + SHA512_LOAD + Write 1 to finish the SHA-512 operation to calculate the final message hash. + 0 + 1 + write-only + + + + + SHA512_BUSY + 0xBC + 0x20 + + + SHA512_BUSY + SHA-512 operation status: 1 if the SHA accelerator is processing data, 0 if it is idle. + 0 + 1 + read-only + + + + + + + SLC + Peripheral SLC + SLC + 0x3FF58000 + + 0x0 + 0x14C + registers + + + + CONF0 + 0x0 + 0x20 + 0xFF3CFF30 + + + SLC0_TX_RST + 0 + 1 + read-write + + + SLC0_RX_RST + 1 + 1 + read-write + + + AHBM_FIFO_RST + 2 + 1 + read-write + + + AHBM_RST + 3 + 1 + read-write + + + SLC0_TX_LOOP_TEST + 4 + 1 + read-write + + + SLC0_RX_LOOP_TEST + 5 + 1 + read-write + + + SLC0_RX_AUTO_WRBACK + 6 + 1 + read-write + + + SLC0_RX_NO_RESTART_CLR + 7 + 1 + read-write + + + SLC0_RXDSCR_BURST_EN + 8 + 1 + read-write + + + SLC0_RXDATA_BURST_EN + 9 + 1 + read-write + + + SLC0_RXLINK_AUTO_RET + 10 + 1 + read-write + + + SLC0_TXLINK_AUTO_RET + 11 + 1 + read-write + + + SLC0_TXDSCR_BURST_EN + 12 + 1 + read-write + + + SLC0_TXDATA_BURST_EN + 13 + 1 + read-write + + + SLC0_TOKEN_AUTO_CLR + 14 + 1 + read-write + + + SLC0_TOKEN_SEL + 15 + 1 + read-write + + + SLC1_TX_RST + 16 + 1 + read-write + + + SLC1_RX_RST + 17 + 1 + read-write + + + SLC0_WR_RETRY_MASK_EN + 18 + 1 + read-write + + + SLC1_WR_RETRY_MASK_EN + 19 + 1 + read-write + + + SLC1_TX_LOOP_TEST + 20 + 1 + read-write + + + SLC1_RX_LOOP_TEST + 21 + 1 + read-write + + + SLC1_RX_AUTO_WRBACK + 22 + 1 + read-write + + + SLC1_RX_NO_RESTART_CLR + 23 + 1 + read-write + + + SLC1_RXDSCR_BURST_EN + 24 + 1 + read-write + + + SLC1_RXDATA_BURST_EN + 25 + 1 + read-write + + + SLC1_RXLINK_AUTO_RET + 26 + 1 + read-write + + + SLC1_TXLINK_AUTO_RET + 27 + 1 + read-write + + + SLC1_TXDSCR_BURST_EN + 28 + 1 + read-write + + + SLC1_TXDATA_BURST_EN + 29 + 1 + read-write + + + SLC1_TOKEN_AUTO_CLR + 30 + 1 + read-write + + + SLC1_TOKEN_SEL + 31 + 1 + read-write + + + + + _0INT_RAW + 0x4 + 0x20 + + + FRHOST_BIT0_INT_RAW + 0 + 1 + read-only + + + FRHOST_BIT1_INT_RAW + 1 + 1 + read-only + + + FRHOST_BIT2_INT_RAW + 2 + 1 + read-only + + + FRHOST_BIT3_INT_RAW + 3 + 1 + read-only + + + FRHOST_BIT4_INT_RAW + 4 + 1 + read-only + + + FRHOST_BIT5_INT_RAW + 5 + 1 + read-only + + + FRHOST_BIT6_INT_RAW + 6 + 1 + read-only + + + FRHOST_BIT7_INT_RAW + 7 + 1 + read-only + + + SLC0_RX_START_INT_RAW + 8 + 1 + read-only + + + SLC0_TX_START_INT_RAW + 9 + 1 + read-only + + + SLC0_RX_UDF_INT_RAW + 10 + 1 + read-only + + + SLC0_TX_OVF_INT_RAW + 11 + 1 + read-only + + + SLC0_TOKEN0_1TO0_INT_RAW + 12 + 1 + read-only + + + SLC0_TOKEN1_1TO0_INT_RAW + 13 + 1 + read-only + + + SLC0_TX_DONE_INT_RAW + 14 + 1 + read-only + + + SLC0_TX_SUC_EOF_INT_RAW + 15 + 1 + read-only + + + SLC0_RX_DONE_INT_RAW + 16 + 1 + read-only + + + SLC0_RX_EOF_INT_RAW + 17 + 1 + read-only + + + SLC0_TOHOST_INT_RAW + 18 + 1 + read-only + + + SLC0_TX_DSCR_ERR_INT_RAW + 19 + 1 + read-only + + + SLC0_RX_DSCR_ERR_INT_RAW + 20 + 1 + read-only + + + SLC0_TX_DSCR_EMPTY_INT_RAW + 21 + 1 + read-only + + + SLC0_HOST_RD_ACK_INT_RAW + 22 + 1 + read-only + + + SLC0_WR_RETRY_DONE_INT_RAW + 23 + 1 + read-only + + + SLC0_TX_ERR_EOF_INT_RAW + 24 + 1 + read-only + + + CMD_DTC_INT_RAW + 25 + 1 + read-only + + + SLC0_RX_QUICK_EOF_INT_RAW + 26 + 1 + read-only + + + + + _0INT_ST + 0x8 + 0x20 + + + FRHOST_BIT0_INT_ST + 0 + 1 + read-only + + + FRHOST_BIT1_INT_ST + 1 + 1 + read-only + + + FRHOST_BIT2_INT_ST + 2 + 1 + read-only + + + FRHOST_BIT3_INT_ST + 3 + 1 + read-only + + + FRHOST_BIT4_INT_ST + 4 + 1 + read-only + + + FRHOST_BIT5_INT_ST + 5 + 1 + read-only + + + FRHOST_BIT6_INT_ST + 6 + 1 + read-only + + + FRHOST_BIT7_INT_ST + 7 + 1 + read-only + + + SLC0_RX_START_INT_ST + 8 + 1 + read-only + + + SLC0_TX_START_INT_ST + 9 + 1 + read-only + + + SLC0_RX_UDF_INT_ST + 10 + 1 + read-only + + + SLC0_TX_OVF_INT_ST + 11 + 1 + read-only + + + SLC0_TOKEN0_1TO0_INT_ST + 12 + 1 + read-only + + + SLC0_TOKEN1_1TO0_INT_ST + 13 + 1 + read-only + + + SLC0_TX_DONE_INT_ST + 14 + 1 + read-only + + + SLC0_TX_SUC_EOF_INT_ST + 15 + 1 + read-only + + + SLC0_RX_DONE_INT_ST + 16 + 1 + read-only + + + SLC0_RX_EOF_INT_ST + 17 + 1 + read-only + + + SLC0_TOHOST_INT_ST + 18 + 1 + read-only + + + SLC0_TX_DSCR_ERR_INT_ST + 19 + 1 + read-only + + + SLC0_RX_DSCR_ERR_INT_ST + 20 + 1 + read-only + + + SLC0_TX_DSCR_EMPTY_INT_ST + 21 + 1 + read-only + + + SLC0_HOST_RD_ACK_INT_ST + 22 + 1 + read-only + + + SLC0_WR_RETRY_DONE_INT_ST + 23 + 1 + read-only + + + SLC0_TX_ERR_EOF_INT_ST + 24 + 1 + read-only + + + CMD_DTC_INT_ST + 25 + 1 + read-only + + + SLC0_RX_QUICK_EOF_INT_ST + 26 + 1 + read-only + + + + + _0INT_ENA + 0xC + 0x20 + + + FRHOST_BIT0_INT_ENA + 0 + 1 + read-write + + + FRHOST_BIT1_INT_ENA + 1 + 1 + read-write + + + FRHOST_BIT2_INT_ENA + 2 + 1 + read-write + + + FRHOST_BIT3_INT_ENA + 3 + 1 + read-write + + + FRHOST_BIT4_INT_ENA + 4 + 1 + read-write + + + FRHOST_BIT5_INT_ENA + 5 + 1 + read-write + + + FRHOST_BIT6_INT_ENA + 6 + 1 + read-write + + + FRHOST_BIT7_INT_ENA + 7 + 1 + read-write + + + SLC0_RX_START_INT_ENA + 8 + 1 + read-write + + + SLC0_TX_START_INT_ENA + 9 + 1 + read-write + + + SLC0_RX_UDF_INT_ENA + 10 + 1 + read-write + + + SLC0_TX_OVF_INT_ENA + 11 + 1 + read-write + + + SLC0_TOKEN0_1TO0_INT_ENA + 12 + 1 + read-write + + + SLC0_TOKEN1_1TO0_INT_ENA + 13 + 1 + read-write + + + SLC0_TX_DONE_INT_ENA + 14 + 1 + read-write + + + SLC0_TX_SUC_EOF_INT_ENA + 15 + 1 + read-write + + + SLC0_RX_DONE_INT_ENA + 16 + 1 + read-write + + + SLC0_RX_EOF_INT_ENA + 17 + 1 + read-write + + + SLC0_TOHOST_INT_ENA + 18 + 1 + read-write + + + SLC0_TX_DSCR_ERR_INT_ENA + 19 + 1 + read-write + + + SLC0_RX_DSCR_ERR_INT_ENA + 20 + 1 + read-write + + + SLC0_TX_DSCR_EMPTY_INT_ENA + 21 + 1 + read-write + + + SLC0_HOST_RD_ACK_INT_ENA + 22 + 1 + read-write + + + SLC0_WR_RETRY_DONE_INT_ENA + 23 + 1 + read-write + + + SLC0_TX_ERR_EOF_INT_ENA + 24 + 1 + read-write + + + CMD_DTC_INT_ENA + 25 + 1 + read-write + + + SLC0_RX_QUICK_EOF_INT_ENA + 26 + 1 + read-write + + + + + _0INT_CLR + 0x10 + 0x20 + + + FRHOST_BIT0_INT_CLR + 0 + 1 + write-only + + + FRHOST_BIT1_INT_CLR + 1 + 1 + write-only + + + FRHOST_BIT2_INT_CLR + 2 + 1 + write-only + + + FRHOST_BIT3_INT_CLR + 3 + 1 + write-only + + + FRHOST_BIT4_INT_CLR + 4 + 1 + write-only + + + FRHOST_BIT5_INT_CLR + 5 + 1 + write-only + + + FRHOST_BIT6_INT_CLR + 6 + 1 + write-only + + + FRHOST_BIT7_INT_CLR + 7 + 1 + write-only + + + SLC0_RX_START_INT_CLR + 8 + 1 + write-only + + + SLC0_TX_START_INT_CLR + 9 + 1 + write-only + + + SLC0_RX_UDF_INT_CLR + 10 + 1 + write-only + + + SLC0_TX_OVF_INT_CLR + 11 + 1 + write-only + + + SLC0_TOKEN0_1TO0_INT_CLR + 12 + 1 + write-only + + + SLC0_TOKEN1_1TO0_INT_CLR + 13 + 1 + write-only + + + SLC0_TX_DONE_INT_CLR + 14 + 1 + write-only + + + SLC0_TX_SUC_EOF_INT_CLR + 15 + 1 + write-only + + + SLC0_RX_DONE_INT_CLR + 16 + 1 + write-only + + + SLC0_RX_EOF_INT_CLR + 17 + 1 + write-only + + + SLC0_TOHOST_INT_CLR + 18 + 1 + write-only + + + SLC0_TX_DSCR_ERR_INT_CLR + 19 + 1 + write-only + + + SLC0_RX_DSCR_ERR_INT_CLR + 20 + 1 + write-only + + + SLC0_TX_DSCR_EMPTY_INT_CLR + 21 + 1 + write-only + + + SLC0_HOST_RD_ACK_INT_CLR + 22 + 1 + write-only + + + SLC0_WR_RETRY_DONE_INT_CLR + 23 + 1 + write-only + + + SLC0_TX_ERR_EOF_INT_CLR + 24 + 1 + write-only + + + CMD_DTC_INT_CLR + 25 + 1 + write-only + + + SLC0_RX_QUICK_EOF_INT_CLR + 26 + 1 + write-only + + + + + _1INT_RAW + 0x14 + 0x20 + + + FRHOST_BIT8_INT_RAW + 0 + 1 + read-only + + + FRHOST_BIT9_INT_RAW + 1 + 1 + read-only + + + FRHOST_BIT10_INT_RAW + 2 + 1 + read-only + + + FRHOST_BIT11_INT_RAW + 3 + 1 + read-only + + + FRHOST_BIT12_INT_RAW + 4 + 1 + read-only + + + FRHOST_BIT13_INT_RAW + 5 + 1 + read-only + + + FRHOST_BIT14_INT_RAW + 6 + 1 + read-only + + + FRHOST_BIT15_INT_RAW + 7 + 1 + read-only + + + SLC1_RX_START_INT_RAW + 8 + 1 + read-only + + + SLC1_TX_START_INT_RAW + 9 + 1 + read-only + + + SLC1_RX_UDF_INT_RAW + 10 + 1 + read-only + + + SLC1_TX_OVF_INT_RAW + 11 + 1 + read-only + + + SLC1_TOKEN0_1TO0_INT_RAW + 12 + 1 + read-only + + + SLC1_TOKEN1_1TO0_INT_RAW + 13 + 1 + read-only + + + SLC1_TX_DONE_INT_RAW + 14 + 1 + read-only + + + SLC1_TX_SUC_EOF_INT_RAW + 15 + 1 + read-only + + + SLC1_RX_DONE_INT_RAW + 16 + 1 + read-only + + + SLC1_RX_EOF_INT_RAW + 17 + 1 + read-only + + + SLC1_TOHOST_INT_RAW + 18 + 1 + read-only + + + SLC1_TX_DSCR_ERR_INT_RAW + 19 + 1 + read-only + + + SLC1_RX_DSCR_ERR_INT_RAW + 20 + 1 + read-only + + + SLC1_TX_DSCR_EMPTY_INT_RAW + 21 + 1 + read-only + + + SLC1_HOST_RD_ACK_INT_RAW + 22 + 1 + read-only + + + SLC1_WR_RETRY_DONE_INT_RAW + 23 + 1 + read-only + + + SLC1_TX_ERR_EOF_INT_RAW + 24 + 1 + read-only + + + + + _1INT_ST + 0x18 + 0x20 + + + FRHOST_BIT8_INT_ST + 0 + 1 + read-only + + + FRHOST_BIT9_INT_ST + 1 + 1 + read-only + + + FRHOST_BIT10_INT_ST + 2 + 1 + read-only + + + FRHOST_BIT11_INT_ST + 3 + 1 + read-only + + + FRHOST_BIT12_INT_ST + 4 + 1 + read-only + + + FRHOST_BIT13_INT_ST + 5 + 1 + read-only + + + FRHOST_BIT14_INT_ST + 6 + 1 + read-only + + + FRHOST_BIT15_INT_ST + 7 + 1 + read-only + + + SLC1_RX_START_INT_ST + 8 + 1 + read-only + + + SLC1_TX_START_INT_ST + 9 + 1 + read-only + + + SLC1_RX_UDF_INT_ST + 10 + 1 + read-only + + + SLC1_TX_OVF_INT_ST + 11 + 1 + read-only + + + SLC1_TOKEN0_1TO0_INT_ST + 12 + 1 + read-only + + + SLC1_TOKEN1_1TO0_INT_ST + 13 + 1 + read-only + + + SLC1_TX_DONE_INT_ST + 14 + 1 + read-only + + + SLC1_TX_SUC_EOF_INT_ST + 15 + 1 + read-only + + + SLC1_RX_DONE_INT_ST + 16 + 1 + read-only + + + SLC1_RX_EOF_INT_ST + 17 + 1 + read-only + + + SLC1_TOHOST_INT_ST + 18 + 1 + read-only + + + SLC1_TX_DSCR_ERR_INT_ST + 19 + 1 + read-only + + + SLC1_RX_DSCR_ERR_INT_ST + 20 + 1 + read-only + + + SLC1_TX_DSCR_EMPTY_INT_ST + 21 + 1 + read-only + + + SLC1_HOST_RD_ACK_INT_ST + 22 + 1 + read-only + + + SLC1_WR_RETRY_DONE_INT_ST + 23 + 1 + read-only + + + SLC1_TX_ERR_EOF_INT_ST + 24 + 1 + read-only + + + + + _1INT_ENA + 0x1C + 0x20 + + + FRHOST_BIT8_INT_ENA + 0 + 1 + read-write + + + FRHOST_BIT9_INT_ENA + 1 + 1 + read-write + + + FRHOST_BIT10_INT_ENA + 2 + 1 + read-write + + + FRHOST_BIT11_INT_ENA + 3 + 1 + read-write + + + FRHOST_BIT12_INT_ENA + 4 + 1 + read-write + + + FRHOST_BIT13_INT_ENA + 5 + 1 + read-write + + + FRHOST_BIT14_INT_ENA + 6 + 1 + read-write + + + FRHOST_BIT15_INT_ENA + 7 + 1 + read-write + + + SLC1_RX_START_INT_ENA + 8 + 1 + read-write + + + SLC1_TX_START_INT_ENA + 9 + 1 + read-write + + + SLC1_RX_UDF_INT_ENA + 10 + 1 + read-write + + + SLC1_TX_OVF_INT_ENA + 11 + 1 + read-write + + + SLC1_TOKEN0_1TO0_INT_ENA + 12 + 1 + read-write + + + SLC1_TOKEN1_1TO0_INT_ENA + 13 + 1 + read-write + + + SLC1_TX_DONE_INT_ENA + 14 + 1 + read-write + + + SLC1_TX_SUC_EOF_INT_ENA + 15 + 1 + read-write + + + SLC1_RX_DONE_INT_ENA + 16 + 1 + read-write + + + SLC1_RX_EOF_INT_ENA + 17 + 1 + read-write + + + SLC1_TOHOST_INT_ENA + 18 + 1 + read-write + + + SLC1_TX_DSCR_ERR_INT_ENA + 19 + 1 + read-write + + + SLC1_RX_DSCR_ERR_INT_ENA + 20 + 1 + read-write + + + SLC1_TX_DSCR_EMPTY_INT_ENA + 21 + 1 + read-write + + + SLC1_HOST_RD_ACK_INT_ENA + 22 + 1 + read-write + + + SLC1_WR_RETRY_DONE_INT_ENA + 23 + 1 + read-write + + + SLC1_TX_ERR_EOF_INT_ENA + 24 + 1 + read-write + + + + + _1INT_CLR + 0x20 + 0x20 + + + FRHOST_BIT8_INT_CLR + 0 + 1 + write-only + + + FRHOST_BIT9_INT_CLR + 1 + 1 + write-only + + + FRHOST_BIT10_INT_CLR + 2 + 1 + write-only + + + FRHOST_BIT11_INT_CLR + 3 + 1 + write-only + + + FRHOST_BIT12_INT_CLR + 4 + 1 + write-only + + + FRHOST_BIT13_INT_CLR + 5 + 1 + write-only + + + FRHOST_BIT14_INT_CLR + 6 + 1 + write-only + + + FRHOST_BIT15_INT_CLR + 7 + 1 + write-only + + + SLC1_RX_START_INT_CLR + 8 + 1 + write-only + + + SLC1_TX_START_INT_CLR + 9 + 1 + write-only + + + SLC1_RX_UDF_INT_CLR + 10 + 1 + write-only + + + SLC1_TX_OVF_INT_CLR + 11 + 1 + write-only + + + SLC1_TOKEN0_1TO0_INT_CLR + 12 + 1 + write-only + + + SLC1_TOKEN1_1TO0_INT_CLR + 13 + 1 + write-only + + + SLC1_TX_DONE_INT_CLR + 14 + 1 + write-only + + + SLC1_TX_SUC_EOF_INT_CLR + 15 + 1 + write-only + + + SLC1_RX_DONE_INT_CLR + 16 + 1 + write-only + + + SLC1_RX_EOF_INT_CLR + 17 + 1 + write-only + + + SLC1_TOHOST_INT_CLR + 18 + 1 + write-only + + + SLC1_TX_DSCR_ERR_INT_CLR + 19 + 1 + write-only + + + SLC1_RX_DSCR_ERR_INT_CLR + 20 + 1 + write-only + + + SLC1_TX_DSCR_EMPTY_INT_CLR + 21 + 1 + write-only + + + SLC1_HOST_RD_ACK_INT_CLR + 22 + 1 + write-only + + + SLC1_WR_RETRY_DONE_INT_CLR + 23 + 1 + write-only + + + SLC1_TX_ERR_EOF_INT_CLR + 24 + 1 + write-only + + + + + RX_STATUS + 0x24 + 0x20 + 0x00020002 + + + SLC0_RX_FULL + 0 + 1 + read-only + + + SLC0_RX_EMPTY + 1 + 1 + read-only + + + SLC1_RX_FULL + 16 + 1 + read-only + + + SLC1_RX_EMPTY + 17 + 1 + read-only + + + + + _0RXFIFO_PUSH + 0x28 + 0x20 + + + SLC0_RXFIFO_WDATA + 0 + 9 + read-write + + + SLC0_RXFIFO_PUSH + 16 + 1 + read-write + + + + + _1RXFIFO_PUSH + 0x2C + 0x20 + + + SLC1_RXFIFO_WDATA + 0 + 9 + read-write + + + SLC1_RXFIFO_PUSH + 16 + 1 + read-write + + + + + TX_STATUS + 0x30 + 0x20 + 0x00020002 + + + SLC0_TX_FULL + 0 + 1 + read-only + + + SLC0_TX_EMPTY + 1 + 1 + read-only + + + SLC1_TX_FULL + 16 + 1 + read-only + + + SLC1_TX_EMPTY + 17 + 1 + read-only + + + + + _0TXFIFO_POP + 0x34 + 0x20 + + + SLC0_TXFIFO_RDATA + 0 + 11 + read-only + + + SLC0_TXFIFO_POP + 16 + 1 + read-write + + + + + _1TXFIFO_POP + 0x38 + 0x20 + + + SLC1_TXFIFO_RDATA + 0 + 11 + read-only + + + SLC1_TXFIFO_POP + 16 + 1 + read-write + + + + + _0RX_LINK + 0x3C + 0x20 + + + SLC0_RXLINK_ADDR + 0 + 20 + read-write + + + SLC0_RXLINK_STOP + 28 + 1 + read-write + + + SLC0_RXLINK_START + 29 + 1 + read-write + + + SLC0_RXLINK_RESTART + 30 + 1 + read-write + + + SLC0_RXLINK_PARK + 31 + 1 + read-only + + + + + _0TX_LINK + 0x40 + 0x20 + + + SLC0_TXLINK_ADDR + 0 + 20 + read-write + + + SLC0_TXLINK_STOP + 28 + 1 + read-write + + + SLC0_TXLINK_START + 29 + 1 + read-write + + + SLC0_TXLINK_RESTART + 30 + 1 + read-write + + + SLC0_TXLINK_PARK + 31 + 1 + read-only + + + + + _1RX_LINK + 0x44 + 0x20 + 0x00100000 + + + SLC1_RXLINK_ADDR + 0 + 20 + read-write + + + SLC1_BT_PACKET + 20 + 1 + read-write + + + SLC1_RXLINK_STOP + 28 + 1 + read-write + + + SLC1_RXLINK_START + 29 + 1 + read-write + + + SLC1_RXLINK_RESTART + 30 + 1 + read-write + + + SLC1_RXLINK_PARK + 31 + 1 + read-only + + + + + _1TX_LINK + 0x48 + 0x20 + + + SLC1_TXLINK_ADDR + 0 + 20 + read-write + + + SLC1_TXLINK_STOP + 28 + 1 + read-write + + + SLC1_TXLINK_START + 29 + 1 + read-write + + + SLC1_TXLINK_RESTART + 30 + 1 + read-write + + + SLC1_TXLINK_PARK + 31 + 1 + read-only + + + + + INTVEC_TOHOST + 0x4C + 0x20 + + + SLC0_TOHOST_INTVEC + 0 + 8 + write-only + + + SLC1_TOHOST_INTVEC + 16 + 8 + write-only + + + + + _0TOKEN0 + 0x50 + 0x20 + + + SLC0_TOKEN0_WDATA + 0 + 12 + write-only + + + SLC0_TOKEN0_WR + 12 + 1 + write-only + + + SLC0_TOKEN0_INC + 13 + 1 + write-only + + + SLC0_TOKEN0_INC_MORE + 14 + 1 + write-only + + + SLC0_TOKEN0 + 16 + 12 + read-only + + + + + _0TOKEN1 + 0x54 + 0x20 + + + SLC0_TOKEN1_WDATA + 0 + 12 + write-only + + + SLC0_TOKEN1_WR + 12 + 1 + write-only + + + SLC0_TOKEN1_INC + 13 + 1 + write-only + + + SLC0_TOKEN1_INC_MORE + 14 + 1 + write-only + + + SLC0_TOKEN1 + 16 + 12 + read-only + + + + + _1TOKEN0 + 0x58 + 0x20 + + + SLC1_TOKEN0_WDATA + 0 + 12 + write-only + + + SLC1_TOKEN0_WR + 12 + 1 + write-only + + + SLC1_TOKEN0_INC + 13 + 1 + write-only + + + SLC1_TOKEN0_INC_MORE + 14 + 1 + write-only + + + SLC1_TOKEN0 + 16 + 12 + read-only + + + + + _1TOKEN1 + 0x5C + 0x20 + + + SLC1_TOKEN1_WDATA + 0 + 12 + write-only + + + SLC1_TOKEN1_WR + 12 + 1 + write-only + + + SLC1_TOKEN1_INC + 13 + 1 + write-only + + + SLC1_TOKEN1_INC_MORE + 14 + 1 + write-only + + + SLC1_TOKEN1 + 16 + 12 + read-only + + + + + CONF1 + 0x60 + 0x20 + 0x00300078 + + + SLC0_CHECK_OWNER + 0 + 1 + read-write + + + SLC0_TX_CHECK_SUM_EN + 1 + 1 + read-write + + + SLC0_RX_CHECK_SUM_EN + 2 + 1 + read-write + + + CMD_HOLD_EN + 3 + 1 + read-write + + + SLC0_LEN_AUTO_CLR + 4 + 1 + read-write + + + SLC0_TX_STITCH_EN + 5 + 1 + read-write + + + SLC0_RX_STITCH_EN + 6 + 1 + read-write + + + SLC1_CHECK_OWNER + 16 + 1 + read-write + + + SLC1_TX_CHECK_SUM_EN + 17 + 1 + read-write + + + SLC1_RX_CHECK_SUM_EN + 18 + 1 + read-write + + + HOST_INT_LEVEL_SEL + 19 + 1 + read-write + + + SLC1_TX_STITCH_EN + 20 + 1 + read-write + + + SLC1_RX_STITCH_EN + 21 + 1 + read-write + + + CLK_EN + 22 + 1 + read-write + + + + + _0_STATE0 + 0x64 + 0x20 + + + SLC0_STATE0 + 0 + 32 + read-only + + + + + _0_STATE1 + 0x68 + 0x20 + + + SLC0_STATE1 + 0 + 32 + read-only + + + + + _1_STATE0 + 0x6C + 0x20 + + + SLC1_STATE0 + 0 + 32 + read-only + + + + + _1_STATE1 + 0x70 + 0x20 + + + SLC1_STATE1 + 0 + 32 + read-only + + + + + BRIDGE_CONF + 0x74 + 0x20 + 0x000A7720 + + + TXEOF_ENA + 0 + 6 + read-write + + + FIFO_MAP_ENA + 8 + 4 + read-write + + + SLC0_TX_DUMMY_MODE + 12 + 1 + read-write + + + HDA_MAP_128K + 13 + 1 + read-write + + + SLC1_TX_DUMMY_MODE + 14 + 1 + read-write + + + TX_PUSH_IDLE_NUM + 16 + 16 + read-write + + + + + _0_TO_EOF_DES_ADDR + 0x78 + 0x20 + + + SLC0_TO_EOF_DES_ADDR + 0 + 32 + read-only + + + + + _0_TX_EOF_DES_ADDR + 0x7C + 0x20 + + + SLC0_TX_SUC_EOF_DES_ADDR + 0 + 32 + read-only + + + + + _0_TO_EOF_BFR_DES_ADDR + 0x80 + 0x20 + + + SLC0_TO_EOF_BFR_DES_ADDR + 0 + 32 + read-only + + + + + _1_TO_EOF_DES_ADDR + 0x84 + 0x20 + + + SLC1_TO_EOF_DES_ADDR + 0 + 32 + read-only + + + + + _1_TX_EOF_DES_ADDR + 0x88 + 0x20 + + + SLC1_TX_SUC_EOF_DES_ADDR + 0 + 32 + read-only + + + + + _1_TO_EOF_BFR_DES_ADDR + 0x8C + 0x20 + + + SLC1_TO_EOF_BFR_DES_ADDR + 0 + 32 + read-only + + + + + AHB_TEST + 0x90 + 0x20 + + + AHB_TESTMODE + 0 + 3 + read-write + + + AHB_TESTADDR + 4 + 2 + read-write + + + + + SDIO_ST + 0x94 + 0x20 + + + CMD_ST + 0 + 3 + read-only + + + FUNC_ST + 4 + 4 + read-only + + + SDIO_WAKEUP + 8 + 1 + read-only + + + BUS_ST + 12 + 3 + read-only + + + FUNC1_ACC_STATE + 16 + 5 + read-only + + + FUNC2_ACC_STATE + 24 + 5 + read-only + + + + + RX_DSCR_CONF + 0x98 + 0x20 + 0x101B101A + + + SLC0_TOKEN_NO_REPLACE + 0 + 1 + read-write + + + SLC0_INFOR_NO_REPLACE + 1 + 1 + read-write + + + SLC0_RX_FILL_MODE + 2 + 1 + read-write + + + SLC0_RX_EOF_MODE + 3 + 1 + read-write + + + SLC0_RX_FILL_EN + 4 + 1 + read-write + + + SLC0_RD_RETRY_THRESHOLD + 5 + 11 + read-write + + + SLC1_TOKEN_NO_REPLACE + 16 + 1 + read-write + + + SLC1_INFOR_NO_REPLACE + 17 + 1 + read-write + + + SLC1_RX_FILL_MODE + 18 + 1 + read-write + + + SLC1_RX_EOF_MODE + 19 + 1 + read-write + + + SLC1_RX_FILL_EN + 20 + 1 + read-write + + + SLC1_RD_RETRY_THRESHOLD + 21 + 11 + read-write + + + + + _0_TXLINK_DSCR + 0x9C + 0x20 + + + SLC0_TXLINK_DSCR + 0 + 32 + read-only + + + + + _0_TXLINK_DSCR_BF0 + 0xA0 + 0x20 + + + SLC0_TXLINK_DSCR_BF0 + 0 + 32 + read-only + + + + + _0_TXLINK_DSCR_BF1 + 0xA4 + 0x20 + + + SLC0_TXLINK_DSCR_BF1 + 0 + 32 + read-only + + + + + _0_RXLINK_DSCR + 0xA8 + 0x20 + + + SLC0_RXLINK_DSCR + 0 + 32 + read-only + + + + + _0_RXLINK_DSCR_BF0 + 0xAC + 0x20 + + + SLC0_RXLINK_DSCR_BF0 + 0 + 32 + read-only + + + + + _0_RXLINK_DSCR_BF1 + 0xB0 + 0x20 + + + SLC0_RXLINK_DSCR_BF1 + 0 + 32 + read-only + + + + + _1_TXLINK_DSCR + 0xB4 + 0x20 + + + SLC1_TXLINK_DSCR + 0 + 32 + read-only + + + + + _1_TXLINK_DSCR_BF0 + 0xB8 + 0x20 + + + SLC1_TXLINK_DSCR_BF0 + 0 + 32 + read-only + + + + + _1_TXLINK_DSCR_BF1 + 0xBC + 0x20 + + + SLC1_TXLINK_DSCR_BF1 + 0 + 32 + read-only + + + + + _1_RXLINK_DSCR + 0xC0 + 0x20 + + + SLC1_RXLINK_DSCR + 0 + 32 + read-only + + + + + _1_RXLINK_DSCR_BF0 + 0xC4 + 0x20 + + + SLC1_RXLINK_DSCR_BF0 + 0 + 32 + read-only + + + + + _1_RXLINK_DSCR_BF1 + 0xC8 + 0x20 + + + SLC1_RXLINK_DSCR_BF1 + 0 + 32 + read-only + + + + + _0_TX_ERREOF_DES_ADDR + 0xCC + 0x20 + + + SLC0_TX_ERR_EOF_DES_ADDR + 0 + 32 + read-only + + + + + _1_TX_ERREOF_DES_ADDR + 0xD0 + 0x20 + + + SLC1_TX_ERR_EOF_DES_ADDR + 0 + 32 + read-only + + + + + TOKEN_LAT + 0xD4 + 0x20 + + + SLC0_TOKEN + 0 + 12 + read-only + + + SLC1_TOKEN + 16 + 12 + read-only + + + + + TX_DSCR_CONF + 0xD8 + 0x20 + 0x00000080 + + + WR_RETRY_THRESHOLD + 0 + 11 + read-write + + + + + CMD_INFOR0 + 0xDC + 0x20 + + + CMD_CONTENT0 + 0 + 32 + read-only + + + + + CMD_INFOR1 + 0xE0 + 0x20 + + + CMD_CONTENT1 + 0 + 32 + read-only + + + + + _0_LEN_CONF + 0xE4 + 0x20 + + + SLC0_LEN_WDATA + 0 + 20 + write-only + + + SLC0_LEN_WR + 20 + 1 + write-only + + + SLC0_LEN_INC + 21 + 1 + write-only + + + SLC0_LEN_INC_MORE + 22 + 1 + write-only + + + SLC0_RX_PACKET_LOAD_EN + 23 + 1 + read-write + + + SLC0_TX_PACKET_LOAD_EN + 24 + 1 + read-write + + + SLC0_RX_GET_USED_DSCR + 25 + 1 + write-only + + + SLC0_TX_GET_USED_DSCR + 26 + 1 + write-only + + + SLC0_RX_NEW_PKT_IND + 27 + 1 + read-only + + + SLC0_TX_NEW_PKT_IND + 28 + 1 + read-only + + + + + _0_LENGTH + 0xE8 + 0x20 + + + SLC0_LEN + 0 + 20 + read-only + + + + + _0_TXPKT_H_DSCR + 0xEC + 0x20 + + + SLC0_TX_PKT_H_DSCR_ADDR + 0 + 32 + read-write + + + + + _0_TXPKT_E_DSCR + 0xF0 + 0x20 + + + SLC0_TX_PKT_E_DSCR_ADDR + 0 + 32 + read-write + + + + + _0_RXPKT_H_DSCR + 0xF4 + 0x20 + + + SLC0_RX_PKT_H_DSCR_ADDR + 0 + 32 + read-write + + + + + _0_RXPKT_E_DSCR + 0xF8 + 0x20 + + + SLC0_RX_PKT_E_DSCR_ADDR + 0 + 32 + read-write + + + + + _0_TXPKTU_H_DSCR + 0xFC + 0x20 + + + SLC0_TX_PKT_START_DSCR_ADDR + 0 + 32 + read-only + + + + + _0_TXPKTU_E_DSCR + 0x100 + 0x20 + + + SLC0_TX_PKT_END_DSCR_ADDR + 0 + 32 + read-only + + + + + _0_RXPKTU_H_DSCR + 0x104 + 0x20 + + + SLC0_RX_PKT_START_DSCR_ADDR + 0 + 32 + read-only + + + + + _0_RXPKTU_E_DSCR + 0x108 + 0x20 + + + SLC0_RX_PKT_END_DSCR_ADDR + 0 + 32 + read-only + + + + + SEQ_POSITION + 0x114 + 0x20 + 0x00000509 + + + SLC0_SEQ_POSITION + 0 + 8 + read-write + + + SLC1_SEQ_POSITION + 8 + 8 + read-write + + + + + _0_DSCR_REC_CONF + 0x118 + 0x20 + 0x000003FF + + + SLC0_RX_DSCR_REC_LIM + 0 + 10 + read-write + + + + + SDIO_CRC_ST0 + 0x11C + 0x20 + + + DAT0_CRC_ERR_CNT + 0 + 8 + read-only + + + DAT1_CRC_ERR_CNT + 8 + 8 + read-only + + + DAT2_CRC_ERR_CNT + 16 + 8 + read-only + + + DAT3_CRC_ERR_CNT + 24 + 8 + read-only + + + + + SDIO_CRC_ST1 + 0x120 + 0x20 + + + CMD_CRC_ERR_CNT + 0 + 8 + read-only + + + ERR_CNT_CLR + 31 + 1 + read-write + + + + + _0_EOF_START_DES + 0x124 + 0x20 + + + SLC0_EOF_START_DES_ADDR + 0 + 32 + read-only + + + + + _0_PUSH_DSCR_ADDR + 0x128 + 0x20 + + + SLC0_RX_PUSH_DSCR_ADDR + 0 + 32 + read-only + + + + + _0_DONE_DSCR_ADDR + 0x12C + 0x20 + + + SLC0_RX_DONE_DSCR_ADDR + 0 + 32 + read-only + + + + + _0_SUB_START_DES + 0x130 + 0x20 + + + SLC0_SUB_PAC_START_DSCR_ADDR + 0 + 32 + read-only + + + + + _0_DSCR_CNT + 0x134 + 0x20 + + + SLC0_RX_DSCR_CNT_LAT + 0 + 10 + read-only + + + SLC0_RX_GET_EOF_OCC + 16 + 1 + read-only + + + + + _0_LEN_LIM_CONF + 0x138 + 0x20 + 0x00005400 + + + SLC0_LEN_LIM + 0 + 20 + read-write + + + + + _0INT_ST1 + 0x13C + 0x20 + + + FRHOST_BIT0_INT_ST1 + 0 + 1 + read-only + + + FRHOST_BIT1_INT_ST1 + 1 + 1 + read-only + + + FRHOST_BIT2_INT_ST1 + 2 + 1 + read-only + + + FRHOST_BIT3_INT_ST1 + 3 + 1 + read-only + + + FRHOST_BIT4_INT_ST1 + 4 + 1 + read-only + + + FRHOST_BIT5_INT_ST1 + 5 + 1 + read-only + + + FRHOST_BIT6_INT_ST1 + 6 + 1 + read-only + + + FRHOST_BIT7_INT_ST1 + 7 + 1 + read-only + + + SLC0_RX_START_INT_ST1 + 8 + 1 + read-only + + + SLC0_TX_START_INT_ST1 + 9 + 1 + read-only + + + SLC0_RX_UDF_INT_ST1 + 10 + 1 + read-only + + + SLC0_TX_OVF_INT_ST1 + 11 + 1 + read-only + + + SLC0_TOKEN0_1TO0_INT_ST1 + 12 + 1 + read-only + + + SLC0_TOKEN1_1TO0_INT_ST1 + 13 + 1 + read-only + + + SLC0_TX_DONE_INT_ST1 + 14 + 1 + read-only + + + SLC0_TX_SUC_EOF_INT_ST1 + 15 + 1 + read-only + + + SLC0_RX_DONE_INT_ST1 + 16 + 1 + read-only + + + SLC0_RX_EOF_INT_ST1 + 17 + 1 + read-only + + + SLC0_TOHOST_INT_ST1 + 18 + 1 + read-only + + + SLC0_TX_DSCR_ERR_INT_ST1 + 19 + 1 + read-only + + + SLC0_RX_DSCR_ERR_INT_ST1 + 20 + 1 + read-only + + + SLC0_TX_DSCR_EMPTY_INT_ST1 + 21 + 1 + read-only + + + SLC0_HOST_RD_ACK_INT_ST1 + 22 + 1 + read-only + + + SLC0_WR_RETRY_DONE_INT_ST1 + 23 + 1 + read-only + + + SLC0_TX_ERR_EOF_INT_ST1 + 24 + 1 + read-only + + + CMD_DTC_INT_ST1 + 25 + 1 + read-only + + + SLC0_RX_QUICK_EOF_INT_ST1 + 26 + 1 + read-only + + + + + _0INT_ENA1 + 0x140 + 0x20 + + + FRHOST_BIT0_INT_ENA1 + 0 + 1 + read-write + + + FRHOST_BIT1_INT_ENA1 + 1 + 1 + read-write + + + FRHOST_BIT2_INT_ENA1 + 2 + 1 + read-write + + + FRHOST_BIT3_INT_ENA1 + 3 + 1 + read-write + + + FRHOST_BIT4_INT_ENA1 + 4 + 1 + read-write + + + FRHOST_BIT5_INT_ENA1 + 5 + 1 + read-write + + + FRHOST_BIT6_INT_ENA1 + 6 + 1 + read-write + + + FRHOST_BIT7_INT_ENA1 + 7 + 1 + read-write + + + SLC0_RX_START_INT_ENA1 + 8 + 1 + read-write + + + SLC0_TX_START_INT_ENA1 + 9 + 1 + read-write + + + SLC0_RX_UDF_INT_ENA1 + 10 + 1 + read-write + + + SLC0_TX_OVF_INT_ENA1 + 11 + 1 + read-write + + + SLC0_TOKEN0_1TO0_INT_ENA1 + 12 + 1 + read-write + + + SLC0_TOKEN1_1TO0_INT_ENA1 + 13 + 1 + read-write + + + SLC0_TX_DONE_INT_ENA1 + 14 + 1 + read-write + + + SLC0_TX_SUC_EOF_INT_ENA1 + 15 + 1 + read-write + + + SLC0_RX_DONE_INT_ENA1 + 16 + 1 + read-write + + + SLC0_RX_EOF_INT_ENA1 + 17 + 1 + read-write + + + SLC0_TOHOST_INT_ENA1 + 18 + 1 + read-write + + + SLC0_TX_DSCR_ERR_INT_ENA1 + 19 + 1 + read-write + + + SLC0_RX_DSCR_ERR_INT_ENA1 + 20 + 1 + read-write + + + SLC0_TX_DSCR_EMPTY_INT_ENA1 + 21 + 1 + read-write + + + SLC0_HOST_RD_ACK_INT_ENA1 + 22 + 1 + read-write + + + SLC0_WR_RETRY_DONE_INT_ENA1 + 23 + 1 + read-write + + + SLC0_TX_ERR_EOF_INT_ENA1 + 24 + 1 + read-write + + + CMD_DTC_INT_ENA1 + 25 + 1 + read-write + + + SLC0_RX_QUICK_EOF_INT_ENA1 + 26 + 1 + read-write + + + + + _1INT_ST1 + 0x144 + 0x20 + + + FRHOST_BIT8_INT_ST1 + 0 + 1 + read-only + + + FRHOST_BIT9_INT_ST1 + 1 + 1 + read-only + + + FRHOST_BIT10_INT_ST1 + 2 + 1 + read-only + + + FRHOST_BIT11_INT_ST1 + 3 + 1 + read-only + + + FRHOST_BIT12_INT_ST1 + 4 + 1 + read-only + + + FRHOST_BIT13_INT_ST1 + 5 + 1 + read-only + + + FRHOST_BIT14_INT_ST1 + 6 + 1 + read-only + + + FRHOST_BIT15_INT_ST1 + 7 + 1 + read-only + + + SLC1_RX_START_INT_ST1 + 8 + 1 + read-only + + + SLC1_TX_START_INT_ST1 + 9 + 1 + read-only + + + SLC1_RX_UDF_INT_ST1 + 10 + 1 + read-only + + + SLC1_TX_OVF_INT_ST1 + 11 + 1 + read-only + + + SLC1_TOKEN0_1TO0_INT_ST1 + 12 + 1 + read-only + + + SLC1_TOKEN1_1TO0_INT_ST1 + 13 + 1 + read-only + + + SLC1_TX_DONE_INT_ST1 + 14 + 1 + read-only + + + SLC1_TX_SUC_EOF_INT_ST1 + 15 + 1 + read-only + + + SLC1_RX_DONE_INT_ST1 + 16 + 1 + read-only + + + SLC1_RX_EOF_INT_ST1 + 17 + 1 + read-only + + + SLC1_TOHOST_INT_ST1 + 18 + 1 + read-only + + + SLC1_TX_DSCR_ERR_INT_ST1 + 19 + 1 + read-only + + + SLC1_RX_DSCR_ERR_INT_ST1 + 20 + 1 + read-only + + + SLC1_TX_DSCR_EMPTY_INT_ST1 + 21 + 1 + read-only + + + SLC1_HOST_RD_ACK_INT_ST1 + 22 + 1 + read-only + + + SLC1_WR_RETRY_DONE_INT_ST1 + 23 + 1 + read-only + + + SLC1_TX_ERR_EOF_INT_ST1 + 24 + 1 + read-only + + + + + _1INT_ENA1 + 0x148 + 0x20 + + + FRHOST_BIT8_INT_ENA1 + 0 + 1 + read-write + + + FRHOST_BIT9_INT_ENA1 + 1 + 1 + read-write + + + FRHOST_BIT10_INT_ENA1 + 2 + 1 + read-write + + + FRHOST_BIT11_INT_ENA1 + 3 + 1 + read-write + + + FRHOST_BIT12_INT_ENA1 + 4 + 1 + read-write + + + FRHOST_BIT13_INT_ENA1 + 5 + 1 + read-write + + + FRHOST_BIT14_INT_ENA1 + 6 + 1 + read-write + + + FRHOST_BIT15_INT_ENA1 + 7 + 1 + read-write + + + SLC1_RX_START_INT_ENA1 + 8 + 1 + read-write + + + SLC1_TX_START_INT_ENA1 + 9 + 1 + read-write + + + SLC1_RX_UDF_INT_ENA1 + 10 + 1 + read-write + + + SLC1_TX_OVF_INT_ENA1 + 11 + 1 + read-write + + + SLC1_TOKEN0_1TO0_INT_ENA1 + 12 + 1 + read-write + + + SLC1_TOKEN1_1TO0_INT_ENA1 + 13 + 1 + read-write + + + SLC1_TX_DONE_INT_ENA1 + 14 + 1 + read-write + + + SLC1_TX_SUC_EOF_INT_ENA1 + 15 + 1 + read-write + + + SLC1_RX_DONE_INT_ENA1 + 16 + 1 + read-write + + + SLC1_RX_EOF_INT_ENA1 + 17 + 1 + read-write + + + SLC1_TOHOST_INT_ENA1 + 18 + 1 + read-write + + + SLC1_TX_DSCR_ERR_INT_ENA1 + 19 + 1 + read-write + + + SLC1_RX_DSCR_ERR_INT_ENA1 + 20 + 1 + read-write + + + SLC1_TX_DSCR_EMPTY_INT_ENA1 + 21 + 1 + read-write + + + SLC1_HOST_RD_ACK_INT_ENA1 + 22 + 1 + read-write + + + SLC1_WR_RETRY_DONE_INT_ENA1 + 23 + 1 + read-write + + + SLC1_TX_ERR_EOF_INT_ENA1 + 24 + 1 + read-write + + + + + DATE + 0x1F8 + 0x20 + 0x16022500 + + + DATE + 0 + 32 + read-write + + + + + ID + 0x1FC + 0x20 + 0x00000100 + + + ID + 0 + 32 + read-write + + + + + + + SLCHOST + Peripheral SLCHOST + SLCHOST + 0x3FF55000 + + 0x0 + 0x104 + registers + + + + HOST_SLCHOST_FUNC2_0 + 0x10 + 0x20 + + + HOST_SLC_FUNC2_INT + 24 + 1 + read-write + + + + + HOST_SLCHOST_FUNC2_1 + 0x14 + 0x20 + + + HOST_SLC_FUNC2_INT_EN + 0 + 1 + read-write + + + + + HOST_SLCHOST_FUNC2_2 + 0x20 + 0x20 + 0x00000001 + + + HOST_SLC_FUNC1_MDSTAT + 0 + 1 + read-write + + + + + HOST_SLCHOST_GPIO_STATUS0 + 0x34 + 0x20 + + + HOST_GPIO_SDIO_INT0 + 0 + 32 + read-only + + + + + HOST_SLCHOST_GPIO_STATUS1 + 0x38 + 0x20 + + + HOST_GPIO_SDIO_INT1 + 0 + 8 + read-only + + + + + HOST_SLCHOST_GPIO_IN0 + 0x3C + 0x20 + + + HOST_GPIO_SDIO_IN0 + 0 + 32 + read-only + + + + + HOST_SLCHOST_GPIO_IN1 + 0x40 + 0x20 + + + HOST_GPIO_SDIO_IN1 + 0 + 8 + read-only + + + + + HOST_SLC0HOST_TOKEN_RDATA + 0x44 + 0x20 + + + HOST_SLC0_TOKEN0 + 0 + 12 + read-only + + + HOST_SLC0_RX_PF_VALID + 12 + 1 + read-only + + + HOST_HOSTSLC0_TOKEN1 + 16 + 12 + read-only + + + HOST_SLC0_RX_PF_EOF + 28 + 4 + read-only + + + + + HOST_SLC0_HOST_PF + 0x48 + 0x20 + + + HOST_SLC0_PF_DATA + 0 + 32 + read-only + + + + + HOST_SLC1_HOST_PF + 0x4C + 0x20 + + + HOST_SLC1_PF_DATA + 0 + 32 + read-only + + + + + HOST_SLC0HOST_INT_RAW + 0x50 + 0x20 + + + HOST_SLC0_TOHOST_BIT0_INT_RAW + 0 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT1_INT_RAW + 1 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT2_INT_RAW + 2 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT3_INT_RAW + 3 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT4_INT_RAW + 4 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT5_INT_RAW + 5 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT6_INT_RAW + 6 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT7_INT_RAW + 7 + 1 + read-only + + + HOST_SLC0_TOKEN0_1TO0_INT_RAW + 8 + 1 + read-only + + + HOST_SLC0_TOKEN1_1TO0_INT_RAW + 9 + 1 + read-only + + + HOST_SLC0_TOKEN0_0TO1_INT_RAW + 10 + 1 + read-only + + + HOST_SLC0_TOKEN1_0TO1_INT_RAW + 11 + 1 + read-only + + + HOST_SLC0HOST_RX_SOF_INT_RAW + 12 + 1 + read-only + + + HOST_SLC0HOST_RX_EOF_INT_RAW + 13 + 1 + read-only + + + HOST_SLC0HOST_RX_START_INT_RAW + 14 + 1 + read-only + + + HOST_SLC0HOST_TX_START_INT_RAW + 15 + 1 + read-only + + + HOST_SLC0_RX_UDF_INT_RAW + 16 + 1 + read-only + + + HOST_SLC0_TX_OVF_INT_RAW + 17 + 1 + read-only + + + HOST_SLC0_RX_PF_VALID_INT_RAW + 18 + 1 + read-only + + + HOST_SLC0_EXT_BIT0_INT_RAW + 19 + 1 + read-only + + + HOST_SLC0_EXT_BIT1_INT_RAW + 20 + 1 + read-only + + + HOST_SLC0_EXT_BIT2_INT_RAW + 21 + 1 + read-only + + + HOST_SLC0_EXT_BIT3_INT_RAW + 22 + 1 + read-only + + + HOST_SLC0_RX_NEW_PACKET_INT_RAW + 23 + 1 + read-only + + + HOST_SLC0_HOST_RD_RETRY_INT_RAW + 24 + 1 + read-only + + + HOST_GPIO_SDIO_INT_RAW + 25 + 1 + read-only + + + + + HOST_SLC1HOST_INT_RAW + 0x54 + 0x20 + + + HOST_SLC1_TOHOST_BIT0_INT_RAW + 0 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT1_INT_RAW + 1 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT2_INT_RAW + 2 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT3_INT_RAW + 3 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT4_INT_RAW + 4 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT5_INT_RAW + 5 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT6_INT_RAW + 6 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT7_INT_RAW + 7 + 1 + read-only + + + HOST_SLC1_TOKEN0_1TO0_INT_RAW + 8 + 1 + read-only + + + HOST_SLC1_TOKEN1_1TO0_INT_RAW + 9 + 1 + read-only + + + HOST_SLC1_TOKEN0_0TO1_INT_RAW + 10 + 1 + read-only + + + HOST_SLC1_TOKEN1_0TO1_INT_RAW + 11 + 1 + read-only + + + HOST_SLC1HOST_RX_SOF_INT_RAW + 12 + 1 + read-only + + + HOST_SLC1HOST_RX_EOF_INT_RAW + 13 + 1 + read-only + + + HOST_SLC1HOST_RX_START_INT_RAW + 14 + 1 + read-only + + + HOST_SLC1HOST_TX_START_INT_RAW + 15 + 1 + read-only + + + HOST_SLC1_RX_UDF_INT_RAW + 16 + 1 + read-only + + + HOST_SLC1_TX_OVF_INT_RAW + 17 + 1 + read-only + + + HOST_SLC1_RX_PF_VALID_INT_RAW + 18 + 1 + read-only + + + HOST_SLC1_EXT_BIT0_INT_RAW + 19 + 1 + read-only + + + HOST_SLC1_EXT_BIT1_INT_RAW + 20 + 1 + read-only + + + HOST_SLC1_EXT_BIT2_INT_RAW + 21 + 1 + read-only + + + HOST_SLC1_EXT_BIT3_INT_RAW + 22 + 1 + read-only + + + HOST_SLC1_WIFI_RX_NEW_PACKET_INT_RAW + 23 + 1 + read-only + + + HOST_SLC1_HOST_RD_RETRY_INT_RAW + 24 + 1 + read-only + + + HOST_SLC1_BT_RX_NEW_PACKET_INT_RAW + 25 + 1 + read-only + + + + + HOST_SLC0HOST_INT_ST + 0x58 + 0x20 + + + HOST_SLC0_TOHOST_BIT0_INT_ST + 0 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT1_INT_ST + 1 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT2_INT_ST + 2 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT3_INT_ST + 3 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT4_INT_ST + 4 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT5_INT_ST + 5 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT6_INT_ST + 6 + 1 + read-only + + + HOST_SLC0_TOHOST_BIT7_INT_ST + 7 + 1 + read-only + + + HOST_SLC0_TOKEN0_1TO0_INT_ST + 8 + 1 + read-only + + + HOST_SLC0_TOKEN1_1TO0_INT_ST + 9 + 1 + read-only + + + HOST_SLC0_TOKEN0_0TO1_INT_ST + 10 + 1 + read-only + + + HOST_SLC0_TOKEN1_0TO1_INT_ST + 11 + 1 + read-only + + + HOST_SLC0HOST_RX_SOF_INT_ST + 12 + 1 + read-only + + + HOST_SLC0HOST_RX_EOF_INT_ST + 13 + 1 + read-only + + + HOST_SLC0HOST_RX_START_INT_ST + 14 + 1 + read-only + + + HOST_SLC0HOST_TX_START_INT_ST + 15 + 1 + read-only + + + HOST_SLC0_RX_UDF_INT_ST + 16 + 1 + read-only + + + HOST_SLC0_TX_OVF_INT_ST + 17 + 1 + read-only + + + HOST_SLC0_RX_PF_VALID_INT_ST + 18 + 1 + read-only + + + HOST_SLC0_EXT_BIT0_INT_ST + 19 + 1 + read-only + + + HOST_SLC0_EXT_BIT1_INT_ST + 20 + 1 + read-only + + + HOST_SLC0_EXT_BIT2_INT_ST + 21 + 1 + read-only + + + HOST_SLC0_EXT_BIT3_INT_ST + 22 + 1 + read-only + + + HOST_SLC0_RX_NEW_PACKET_INT_ST + 23 + 1 + read-only + + + HOST_SLC0_HOST_RD_RETRY_INT_ST + 24 + 1 + read-only + + + HOST_GPIO_SDIO_INT_ST + 25 + 1 + read-only + + + + + HOST_SLC1HOST_INT_ST + 0x5C + 0x20 + + + HOST_SLC1_TOHOST_BIT0_INT_ST + 0 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT1_INT_ST + 1 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT2_INT_ST + 2 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT3_INT_ST + 3 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT4_INT_ST + 4 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT5_INT_ST + 5 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT6_INT_ST + 6 + 1 + read-only + + + HOST_SLC1_TOHOST_BIT7_INT_ST + 7 + 1 + read-only + + + HOST_SLC1_TOKEN0_1TO0_INT_ST + 8 + 1 + read-only + + + HOST_SLC1_TOKEN1_1TO0_INT_ST + 9 + 1 + read-only + + + HOST_SLC1_TOKEN0_0TO1_INT_ST + 10 + 1 + read-only + + + HOST_SLC1_TOKEN1_0TO1_INT_ST + 11 + 1 + read-only + + + HOST_SLC1HOST_RX_SOF_INT_ST + 12 + 1 + read-only + + + HOST_SLC1HOST_RX_EOF_INT_ST + 13 + 1 + read-only + + + HOST_SLC1HOST_RX_START_INT_ST + 14 + 1 + read-only + + + HOST_SLC1HOST_TX_START_INT_ST + 15 + 1 + read-only + + + HOST_SLC1_RX_UDF_INT_ST + 16 + 1 + read-only + + + HOST_SLC1_TX_OVF_INT_ST + 17 + 1 + read-only + + + HOST_SLC1_RX_PF_VALID_INT_ST + 18 + 1 + read-only + + + HOST_SLC1_EXT_BIT0_INT_ST + 19 + 1 + read-only + + + HOST_SLC1_EXT_BIT1_INT_ST + 20 + 1 + read-only + + + HOST_SLC1_EXT_BIT2_INT_ST + 21 + 1 + read-only + + + HOST_SLC1_EXT_BIT3_INT_ST + 22 + 1 + read-only + + + HOST_SLC1_WIFI_RX_NEW_PACKET_INT_ST + 23 + 1 + read-only + + + HOST_SLC1_HOST_RD_RETRY_INT_ST + 24 + 1 + read-only + + + HOST_SLC1_BT_RX_NEW_PACKET_INT_ST + 25 + 1 + read-only + + + + + HOST_SLCHOST_PKT_LEN + 0x60 + 0x20 + + + HOST_HOSTSLC0_LEN + 0 + 20 + read-only + + + HOST_HOSTSLC0_LEN_CHECK + 20 + 12 + read-only + + + + + HOST_SLCHOST_STATE_W0 + 0x64 + 0x20 + + + HOST_SLCHOST_STATE0 + 0 + 8 + read-only + + + HOST_SLCHOST_STATE1 + 8 + 8 + read-only + + + HOST_SLCHOST_STATE2 + 16 + 8 + read-only + + + HOST_SLCHOST_STATE3 + 24 + 8 + read-only + + + + + HOST_SLCHOST_STATE_W1 + 0x68 + 0x20 + + + HOST_SLCHOST_STATE4 + 0 + 8 + read-only + + + HOST_SLCHOST_STATE5 + 8 + 8 + read-only + + + HOST_SLCHOST_STATE6 + 16 + 8 + read-only + + + HOST_SLCHOST_STATE7 + 24 + 8 + read-only + + + + + HOST_SLCHOST_CONF_W0 + 0x6C + 0x20 + + + HOST_SLCHOST_CONF0 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF1 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF2 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF3 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W1 + 0x70 + 0x20 + + + HOST_SLCHOST_CONF4 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF5 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF6 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF7 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W2 + 0x74 + 0x20 + + + HOST_SLCHOST_CONF8 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF9 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF10 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF11 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W3 + 0x78 + 0x20 + 0x000000C0 + + + HOST_SLCHOST_CONF12 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF13 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF14 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF15 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W4 + 0x7C + 0x20 + 0x000001FF + + + HOST_SLCHOST_CONF16 + SLC timeout value + 0 + 8 + read-write + + + HOST_SLCHOST_CONF17 + SLC timeout enable + 8 + 8 + read-write + + + HOST_SLCHOST_CONF18 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF19 + Interrupt to target CPU + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W5 + 0x80 + 0x20 + + + HOST_SLCHOST_CONF20 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF21 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF22 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF23 + 24 + 8 + read-write + + + + + HOST_SLCHOST_WIN_CMD + 0x84 + 0x20 + + + HOST_SLCHOST_CONF_W6 + 0x88 + 0x20 + + + HOST_SLCHOST_CONF24 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF25 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF26 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF27 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W7 + 0x8C + 0x20 + + + HOST_SLCHOST_CONF28 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF29 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF30 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF31 + 24 + 8 + read-write + + + + + HOST_SLCHOST_PKT_LEN0 + 0x90 + 0x20 + + + HOST_HOSTSLC0_LEN0 + 0 + 20 + read-only + + + + + HOST_SLCHOST_PKT_LEN1 + 0x94 + 0x20 + + + HOST_HOSTSLC0_LEN1 + 0 + 20 + read-only + + + + + HOST_SLCHOST_PKT_LEN2 + 0x98 + 0x20 + + + HOST_HOSTSLC0_LEN2 + 0 + 20 + read-only + + + + + HOST_SLCHOST_CONF_W8 + 0x9C + 0x20 + + + HOST_SLCHOST_CONF32 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF33 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF34 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF35 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W9 + 0xA0 + 0x20 + + + HOST_SLCHOST_CONF36 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF37 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF38 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF39 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W10 + 0xA4 + 0x20 + + + HOST_SLCHOST_CONF40 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF41 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF42 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF43 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W11 + 0xA8 + 0x20 + + + HOST_SLCHOST_CONF44 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF45 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF46 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF47 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W12 + 0xAC + 0x20 + + + HOST_SLCHOST_CONF48 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF49 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF50 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF51 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W13 + 0xB0 + 0x20 + + + HOST_SLCHOST_CONF52 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF53 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF54 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF55 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W14 + 0xB4 + 0x20 + + + HOST_SLCHOST_CONF56 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF57 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF58 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF59 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CONF_W15 + 0xB8 + 0x20 + + + HOST_SLCHOST_CONF60 + 0 + 8 + read-write + + + HOST_SLCHOST_CONF61 + 8 + 8 + read-write + + + HOST_SLCHOST_CONF62 + 16 + 8 + read-write + + + HOST_SLCHOST_CONF63 + 24 + 8 + read-write + + + + + HOST_SLCHOST_CHECK_SUM0 + 0xBC + 0x20 + + + HOST_SLCHOST_CHECK_SUM0 + 0 + 32 + read-only + + + + + HOST_SLCHOST_CHECK_SUM1 + 0xC0 + 0x20 + + + HOST_SLCHOST_CHECK_SUM1 + 0 + 32 + read-only + + + + + HOST_SLC1HOST_TOKEN_RDATA + 0xC4 + 0x20 + + + HOST_SLC1_TOKEN0 + 0 + 12 + read-only + + + HOST_SLC1_RX_PF_VALID + 12 + 1 + read-only + + + HOST_HOSTSLC1_TOKEN1 + 16 + 12 + read-only + + + HOST_SLC1_RX_PF_EOF + 28 + 4 + read-only + + + + + HOST_SLC0HOST_TOKEN_WDATA + 0xC8 + 0x20 + + + HOST_SLC0HOST_TOKEN0_WD + 0 + 12 + read-write + + + HOST_SLC0HOST_TOKEN1_WD + 16 + 12 + read-write + + + + + HOST_SLC1HOST_TOKEN_WDATA + 0xCC + 0x20 + + + HOST_SLC1HOST_TOKEN0_WD + 0 + 12 + read-write + + + HOST_SLC1HOST_TOKEN1_WD + 16 + 12 + read-write + + + + + HOST_SLCHOST_TOKEN_CON + 0xD0 + 0x20 + + + HOST_SLC0HOST_TOKEN0_DEC + 0 + 1 + write-only + + + HOST_SLC0HOST_TOKEN1_DEC + 1 + 1 + write-only + + + HOST_SLC0HOST_TOKEN0_WR + 2 + 1 + write-only + + + HOST_SLC0HOST_TOKEN1_WR + 3 + 1 + write-only + + + HOST_SLC1HOST_TOKEN0_DEC + 4 + 1 + write-only + + + HOST_SLC1HOST_TOKEN1_DEC + 5 + 1 + write-only + + + HOST_SLC1HOST_TOKEN0_WR + 6 + 1 + write-only + + + HOST_SLC1HOST_TOKEN1_WR + 7 + 1 + write-only + + + HOST_SLC0HOST_LEN_WR + 8 + 1 + write-only + + + + + HOST_SLC0HOST_INT_CLR + 0xD4 + 0x20 + + + HOST_SLC0_TOHOST_BIT0_INT_CLR + 0 + 1 + write-only + + + HOST_SLC0_TOHOST_BIT1_INT_CLR + 1 + 1 + write-only + + + HOST_SLC0_TOHOST_BIT2_INT_CLR + 2 + 1 + write-only + + + HOST_SLC0_TOHOST_BIT3_INT_CLR + 3 + 1 + write-only + + + HOST_SLC0_TOHOST_BIT4_INT_CLR + 4 + 1 + write-only + + + HOST_SLC0_TOHOST_BIT5_INT_CLR + 5 + 1 + write-only + + + HOST_SLC0_TOHOST_BIT6_INT_CLR + 6 + 1 + write-only + + + HOST_SLC0_TOHOST_BIT7_INT_CLR + 7 + 1 + write-only + + + HOST_SLC0_TOKEN0_1TO0_INT_CLR + 8 + 1 + write-only + + + HOST_SLC0_TOKEN1_1TO0_INT_CLR + 9 + 1 + write-only + + + HOST_SLC0_TOKEN0_0TO1_INT_CLR + 10 + 1 + write-only + + + HOST_SLC0_TOKEN1_0TO1_INT_CLR + 11 + 1 + write-only + + + HOST_SLC0HOST_RX_SOF_INT_CLR + 12 + 1 + write-only + + + HOST_SLC0HOST_RX_EOF_INT_CLR + 13 + 1 + write-only + + + HOST_SLC0HOST_RX_START_INT_CLR + 14 + 1 + write-only + + + HOST_SLC0HOST_TX_START_INT_CLR + 15 + 1 + write-only + + + HOST_SLC0_RX_UDF_INT_CLR + 16 + 1 + write-only + + + HOST_SLC0_TX_OVF_INT_CLR + 17 + 1 + write-only + + + HOST_SLC0_RX_PF_VALID_INT_CLR + 18 + 1 + write-only + + + HOST_SLC0_EXT_BIT0_INT_CLR + 19 + 1 + write-only + + + HOST_SLC0_EXT_BIT1_INT_CLR + 20 + 1 + write-only + + + HOST_SLC0_EXT_BIT2_INT_CLR + 21 + 1 + write-only + + + HOST_SLC0_EXT_BIT3_INT_CLR + 22 + 1 + write-only + + + HOST_SLC0_RX_NEW_PACKET_INT_CLR + 23 + 1 + write-only + + + HOST_SLC0_HOST_RD_RETRY_INT_CLR + 24 + 1 + write-only + + + HOST_GPIO_SDIO_INT_CLR + 25 + 1 + write-only + + + + + HOST_SLC1HOST_INT_CLR + 0xD8 + 0x20 + + + HOST_SLC1_TOHOST_BIT0_INT_CLR + 0 + 1 + write-only + + + HOST_SLC1_TOHOST_BIT1_INT_CLR + 1 + 1 + write-only + + + HOST_SLC1_TOHOST_BIT2_INT_CLR + 2 + 1 + write-only + + + HOST_SLC1_TOHOST_BIT3_INT_CLR + 3 + 1 + write-only + + + HOST_SLC1_TOHOST_BIT4_INT_CLR + 4 + 1 + write-only + + + HOST_SLC1_TOHOST_BIT5_INT_CLR + 5 + 1 + write-only + + + HOST_SLC1_TOHOST_BIT6_INT_CLR + 6 + 1 + write-only + + + HOST_SLC1_TOHOST_BIT7_INT_CLR + 7 + 1 + write-only + + + HOST_SLC1_TOKEN0_1TO0_INT_CLR + 8 + 1 + write-only + + + HOST_SLC1_TOKEN1_1TO0_INT_CLR + 9 + 1 + write-only + + + HOST_SLC1_TOKEN0_0TO1_INT_CLR + 10 + 1 + write-only + + + HOST_SLC1_TOKEN1_0TO1_INT_CLR + 11 + 1 + write-only + + + HOST_SLC1HOST_RX_SOF_INT_CLR + 12 + 1 + write-only + + + HOST_SLC1HOST_RX_EOF_INT_CLR + 13 + 1 + write-only + + + HOST_SLC1HOST_RX_START_INT_CLR + 14 + 1 + write-only + + + HOST_SLC1HOST_TX_START_INT_CLR + 15 + 1 + write-only + + + HOST_SLC1_RX_UDF_INT_CLR + 16 + 1 + write-only + + + HOST_SLC1_TX_OVF_INT_CLR + 17 + 1 + write-only + + + HOST_SLC1_RX_PF_VALID_INT_CLR + 18 + 1 + write-only + + + HOST_SLC1_EXT_BIT0_INT_CLR + 19 + 1 + write-only + + + HOST_SLC1_EXT_BIT1_INT_CLR + 20 + 1 + write-only + + + HOST_SLC1_EXT_BIT2_INT_CLR + 21 + 1 + write-only + + + HOST_SLC1_EXT_BIT3_INT_CLR + 22 + 1 + write-only + + + HOST_SLC1_WIFI_RX_NEW_PACKET_INT_CLR + 23 + 1 + write-only + + + HOST_SLC1_HOST_RD_RETRY_INT_CLR + 24 + 1 + write-only + + + HOST_SLC1_BT_RX_NEW_PACKET_INT_CLR + 25 + 1 + write-only + + + + + HOST_SLC0HOST_FUNC1_INT_ENA + 0xDC + 0x20 + + + HOST_FN1_SLC0_TOHOST_BIT0_INT_ENA + 0 + 1 + read-write + + + HOST_FN1_SLC0_TOHOST_BIT1_INT_ENA + 1 + 1 + read-write + + + HOST_FN1_SLC0_TOHOST_BIT2_INT_ENA + 2 + 1 + read-write + + + HOST_FN1_SLC0_TOHOST_BIT3_INT_ENA + 3 + 1 + read-write + + + HOST_FN1_SLC0_TOHOST_BIT4_INT_ENA + 4 + 1 + read-write + + + HOST_FN1_SLC0_TOHOST_BIT5_INT_ENA + 5 + 1 + read-write + + + HOST_FN1_SLC0_TOHOST_BIT6_INT_ENA + 6 + 1 + read-write + + + HOST_FN1_SLC0_TOHOST_BIT7_INT_ENA + 7 + 1 + read-write + + + HOST_FN1_SLC0_TOKEN0_1TO0_INT_ENA + 8 + 1 + read-write + + + HOST_FN1_SLC0_TOKEN1_1TO0_INT_ENA + 9 + 1 + read-write + + + HOST_FN1_SLC0_TOKEN0_0TO1_INT_ENA + 10 + 1 + read-write + + + HOST_FN1_SLC0_TOKEN1_0TO1_INT_ENA + 11 + 1 + read-write + + + HOST_FN1_SLC0HOST_RX_SOF_INT_ENA + 12 + 1 + read-write + + + HOST_FN1_SLC0HOST_RX_EOF_INT_ENA + 13 + 1 + read-write + + + HOST_FN1_SLC0HOST_RX_START_INT_ENA + 14 + 1 + read-write + + + HOST_FN1_SLC0HOST_TX_START_INT_ENA + 15 + 1 + read-write + + + HOST_FN1_SLC0_RX_UDF_INT_ENA + 16 + 1 + read-write + + + HOST_FN1_SLC0_TX_OVF_INT_ENA + 17 + 1 + read-write + + + HOST_FN1_SLC0_RX_PF_VALID_INT_ENA + 18 + 1 + read-write + + + HOST_FN1_SLC0_EXT_BIT0_INT_ENA + 19 + 1 + read-write + + + HOST_FN1_SLC0_EXT_BIT1_INT_ENA + 20 + 1 + read-write + + + HOST_FN1_SLC0_EXT_BIT2_INT_ENA + 21 + 1 + read-write + + + HOST_FN1_SLC0_EXT_BIT3_INT_ENA + 22 + 1 + read-write + + + HOST_FN1_SLC0_RX_NEW_PACKET_INT_ENA + 23 + 1 + read-write + + + HOST_FN1_SLC0_HOST_RD_RETRY_INT_ENA + 24 + 1 + read-write + + + HOST_FN1_GPIO_SDIO_INT_ENA + 25 + 1 + read-write + + + + + HOST_SLC1HOST_FUNC1_INT_ENA + 0xE0 + 0x20 + + + HOST_FN1_SLC1_TOHOST_BIT0_INT_ENA + 0 + 1 + read-write + + + HOST_FN1_SLC1_TOHOST_BIT1_INT_ENA + 1 + 1 + read-write + + + HOST_FN1_SLC1_TOHOST_BIT2_INT_ENA + 2 + 1 + read-write + + + HOST_FN1_SLC1_TOHOST_BIT3_INT_ENA + 3 + 1 + read-write + + + HOST_FN1_SLC1_TOHOST_BIT4_INT_ENA + 4 + 1 + read-write + + + HOST_FN1_SLC1_TOHOST_BIT5_INT_ENA + 5 + 1 + read-write + + + HOST_FN1_SLC1_TOHOST_BIT6_INT_ENA + 6 + 1 + read-write + + + HOST_FN1_SLC1_TOHOST_BIT7_INT_ENA + 7 + 1 + read-write + + + HOST_FN1_SLC1_TOKEN0_1TO0_INT_ENA + 8 + 1 + read-write + + + HOST_FN1_SLC1_TOKEN1_1TO0_INT_ENA + 9 + 1 + read-write + + + HOST_FN1_SLC1_TOKEN0_0TO1_INT_ENA + 10 + 1 + read-write + + + HOST_FN1_SLC1_TOKEN1_0TO1_INT_ENA + 11 + 1 + read-write + + + HOST_FN1_SLC1HOST_RX_SOF_INT_ENA + 12 + 1 + read-write + + + HOST_FN1_SLC1HOST_RX_EOF_INT_ENA + 13 + 1 + read-write + + + HOST_FN1_SLC1HOST_RX_START_INT_ENA + 14 + 1 + read-write + + + HOST_FN1_SLC1HOST_TX_START_INT_ENA + 15 + 1 + read-write + + + HOST_FN1_SLC1_RX_UDF_INT_ENA + 16 + 1 + read-write + + + HOST_FN1_SLC1_TX_OVF_INT_ENA + 17 + 1 + read-write + + + HOST_FN1_SLC1_RX_PF_VALID_INT_ENA + 18 + 1 + read-write + + + HOST_FN1_SLC1_EXT_BIT0_INT_ENA + 19 + 1 + read-write + + + HOST_FN1_SLC1_EXT_BIT1_INT_ENA + 20 + 1 + read-write + + + HOST_FN1_SLC1_EXT_BIT2_INT_ENA + 21 + 1 + read-write + + + HOST_FN1_SLC1_EXT_BIT3_INT_ENA + 22 + 1 + read-write + + + HOST_FN1_SLC1_WIFI_RX_NEW_PACKET_INT_ENA + 23 + 1 + read-write + + + HOST_FN1_SLC1_HOST_RD_RETRY_INT_ENA + 24 + 1 + read-write + + + HOST_FN1_SLC1_BT_RX_NEW_PACKET_INT_ENA + 25 + 1 + read-write + + + + + HOST_SLC0HOST_FUNC2_INT_ENA + 0xE4 + 0x20 + + + HOST_FN2_SLC0_TOHOST_BIT0_INT_ENA + 0 + 1 + read-write + + + HOST_FN2_SLC0_TOHOST_BIT1_INT_ENA + 1 + 1 + read-write + + + HOST_FN2_SLC0_TOHOST_BIT2_INT_ENA + 2 + 1 + read-write + + + HOST_FN2_SLC0_TOHOST_BIT3_INT_ENA + 3 + 1 + read-write + + + HOST_FN2_SLC0_TOHOST_BIT4_INT_ENA + 4 + 1 + read-write + + + HOST_FN2_SLC0_TOHOST_BIT5_INT_ENA + 5 + 1 + read-write + + + HOST_FN2_SLC0_TOHOST_BIT6_INT_ENA + 6 + 1 + read-write + + + HOST_FN2_SLC0_TOHOST_BIT7_INT_ENA + 7 + 1 + read-write + + + HOST_FN2_SLC0_TOKEN0_1TO0_INT_ENA + 8 + 1 + read-write + + + HOST_FN2_SLC0_TOKEN1_1TO0_INT_ENA + 9 + 1 + read-write + + + HOST_FN2_SLC0_TOKEN0_0TO1_INT_ENA + 10 + 1 + read-write + + + HOST_FN2_SLC0_TOKEN1_0TO1_INT_ENA + 11 + 1 + read-write + + + HOST_FN2_SLC0HOST_RX_SOF_INT_ENA + 12 + 1 + read-write + + + HOST_FN2_SLC0HOST_RX_EOF_INT_ENA + 13 + 1 + read-write + + + HOST_FN2_SLC0HOST_RX_START_INT_ENA + 14 + 1 + read-write + + + HOST_FN2_SLC0HOST_TX_START_INT_ENA + 15 + 1 + read-write + + + HOST_FN2_SLC0_RX_UDF_INT_ENA + 16 + 1 + read-write + + + HOST_FN2_SLC0_TX_OVF_INT_ENA + 17 + 1 + read-write + + + HOST_FN2_SLC0_RX_PF_VALID_INT_ENA + 18 + 1 + read-write + + + HOST_FN2_SLC0_EXT_BIT0_INT_ENA + 19 + 1 + read-write + + + HOST_FN2_SLC0_EXT_BIT1_INT_ENA + 20 + 1 + read-write + + + HOST_FN2_SLC0_EXT_BIT2_INT_ENA + 21 + 1 + read-write + + + HOST_FN2_SLC0_EXT_BIT3_INT_ENA + 22 + 1 + read-write + + + HOST_FN2_SLC0_RX_NEW_PACKET_INT_ENA + 23 + 1 + read-write + + + HOST_FN2_SLC0_HOST_RD_RETRY_INT_ENA + 24 + 1 + read-write + + + HOST_FN2_GPIO_SDIO_INT_ENA + 25 + 1 + read-write + + + + + HOST_SLC1HOST_FUNC2_INT_ENA + 0xE8 + 0x20 + + + HOST_FN2_SLC1_TOHOST_BIT0_INT_ENA + 0 + 1 + read-write + + + HOST_FN2_SLC1_TOHOST_BIT1_INT_ENA + 1 + 1 + read-write + + + HOST_FN2_SLC1_TOHOST_BIT2_INT_ENA + 2 + 1 + read-write + + + HOST_FN2_SLC1_TOHOST_BIT3_INT_ENA + 3 + 1 + read-write + + + HOST_FN2_SLC1_TOHOST_BIT4_INT_ENA + 4 + 1 + read-write + + + HOST_FN2_SLC1_TOHOST_BIT5_INT_ENA + 5 + 1 + read-write + + + HOST_FN2_SLC1_TOHOST_BIT6_INT_ENA + 6 + 1 + read-write + + + HOST_FN2_SLC1_TOHOST_BIT7_INT_ENA + 7 + 1 + read-write + + + HOST_FN2_SLC1_TOKEN0_1TO0_INT_ENA + 8 + 1 + read-write + + + HOST_FN2_SLC1_TOKEN1_1TO0_INT_ENA + 9 + 1 + read-write + + + HOST_FN2_SLC1_TOKEN0_0TO1_INT_ENA + 10 + 1 + read-write + + + HOST_FN2_SLC1_TOKEN1_0TO1_INT_ENA + 11 + 1 + read-write + + + HOST_FN2_SLC1HOST_RX_SOF_INT_ENA + 12 + 1 + read-write + + + HOST_FN2_SLC1HOST_RX_EOF_INT_ENA + 13 + 1 + read-write + + + HOST_FN2_SLC1HOST_RX_START_INT_ENA + 14 + 1 + read-write + + + HOST_FN2_SLC1HOST_TX_START_INT_ENA + 15 + 1 + read-write + + + HOST_FN2_SLC1_RX_UDF_INT_ENA + 16 + 1 + read-write + + + HOST_FN2_SLC1_TX_OVF_INT_ENA + 17 + 1 + read-write + + + HOST_FN2_SLC1_RX_PF_VALID_INT_ENA + 18 + 1 + read-write + + + HOST_FN2_SLC1_EXT_BIT0_INT_ENA + 19 + 1 + read-write + + + HOST_FN2_SLC1_EXT_BIT1_INT_ENA + 20 + 1 + read-write + + + HOST_FN2_SLC1_EXT_BIT2_INT_ENA + 21 + 1 + read-write + + + HOST_FN2_SLC1_EXT_BIT3_INT_ENA + 22 + 1 + read-write + + + HOST_FN2_SLC1_WIFI_RX_NEW_PACKET_INT_ENA + 23 + 1 + read-write + + + HOST_FN2_SLC1_HOST_RD_RETRY_INT_ENA + 24 + 1 + read-write + + + HOST_FN2_SLC1_BT_RX_NEW_PACKET_INT_ENA + 25 + 1 + read-write + + + + + HOST_SLC0HOST_INT_ENA + 0xEC + 0x20 + + + HOST_SLC0_TOHOST_BIT0_INT_ENA + 0 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT1_INT_ENA + 1 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT2_INT_ENA + 2 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT3_INT_ENA + 3 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT4_INT_ENA + 4 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT5_INT_ENA + 5 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT6_INT_ENA + 6 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT7_INT_ENA + 7 + 1 + read-write + + + HOST_SLC0_TOKEN0_1TO0_INT_ENA + 8 + 1 + read-write + + + HOST_SLC0_TOKEN1_1TO0_INT_ENA + 9 + 1 + read-write + + + HOST_SLC0_TOKEN0_0TO1_INT_ENA + 10 + 1 + read-write + + + HOST_SLC0_TOKEN1_0TO1_INT_ENA + 11 + 1 + read-write + + + HOST_SLC0HOST_RX_SOF_INT_ENA + 12 + 1 + read-write + + + HOST_SLC0HOST_RX_EOF_INT_ENA + 13 + 1 + read-write + + + HOST_SLC0HOST_RX_START_INT_ENA + 14 + 1 + read-write + + + HOST_SLC0HOST_TX_START_INT_ENA + 15 + 1 + read-write + + + HOST_SLC0_RX_UDF_INT_ENA + 16 + 1 + read-write + + + HOST_SLC0_TX_OVF_INT_ENA + 17 + 1 + read-write + + + HOST_SLC0_RX_PF_VALID_INT_ENA + 18 + 1 + read-write + + + HOST_SLC0_EXT_BIT0_INT_ENA + 19 + 1 + read-write + + + HOST_SLC0_EXT_BIT1_INT_ENA + 20 + 1 + read-write + + + HOST_SLC0_EXT_BIT2_INT_ENA + 21 + 1 + read-write + + + HOST_SLC0_EXT_BIT3_INT_ENA + 22 + 1 + read-write + + + HOST_SLC0_RX_NEW_PACKET_INT_ENA + 23 + 1 + read-write + + + HOST_SLC0_HOST_RD_RETRY_INT_ENA + 24 + 1 + read-write + + + HOST_GPIO_SDIO_INT_ENA + 25 + 1 + read-write + + + + + HOST_SLC1HOST_INT_ENA + 0xF0 + 0x20 + + + HOST_SLC1_TOHOST_BIT0_INT_ENA + 0 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT1_INT_ENA + 1 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT2_INT_ENA + 2 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT3_INT_ENA + 3 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT4_INT_ENA + 4 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT5_INT_ENA + 5 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT6_INT_ENA + 6 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT7_INT_ENA + 7 + 1 + read-write + + + HOST_SLC1_TOKEN0_1TO0_INT_ENA + 8 + 1 + read-write + + + HOST_SLC1_TOKEN1_1TO0_INT_ENA + 9 + 1 + read-write + + + HOST_SLC1_TOKEN0_0TO1_INT_ENA + 10 + 1 + read-write + + + HOST_SLC1_TOKEN1_0TO1_INT_ENA + 11 + 1 + read-write + + + HOST_SLC1HOST_RX_SOF_INT_ENA + 12 + 1 + read-write + + + HOST_SLC1HOST_RX_EOF_INT_ENA + 13 + 1 + read-write + + + HOST_SLC1HOST_RX_START_INT_ENA + 14 + 1 + read-write + + + HOST_SLC1HOST_TX_START_INT_ENA + 15 + 1 + read-write + + + HOST_SLC1_RX_UDF_INT_ENA + 16 + 1 + read-write + + + HOST_SLC1_TX_OVF_INT_ENA + 17 + 1 + read-write + + + HOST_SLC1_RX_PF_VALID_INT_ENA + 18 + 1 + read-write + + + HOST_SLC1_EXT_BIT0_INT_ENA + 19 + 1 + read-write + + + HOST_SLC1_EXT_BIT1_INT_ENA + 20 + 1 + read-write + + + HOST_SLC1_EXT_BIT2_INT_ENA + 21 + 1 + read-write + + + HOST_SLC1_EXT_BIT3_INT_ENA + 22 + 1 + read-write + + + HOST_SLC1_WIFI_RX_NEW_PACKET_INT_ENA + 23 + 1 + read-write + + + HOST_SLC1_HOST_RD_RETRY_INT_ENA + 24 + 1 + read-write + + + HOST_SLC1_BT_RX_NEW_PACKET_INT_ENA + 25 + 1 + read-write + + + + + HOST_SLC0HOST_RX_INFOR + 0xF4 + 0x20 + + + HOST_SLC0HOST_RX_INFOR + 0 + 20 + read-write + + + + + HOST_SLC1HOST_RX_INFOR + 0xF8 + 0x20 + + + HOST_SLC1HOST_RX_INFOR + 0 + 20 + read-write + + + + + HOST_SLC0HOST_LEN_WD + 0xFC + 0x20 + + + HOST_SLC0HOST_LEN_WD + 0 + 32 + read-write + + + + + HOST_SLC_APBWIN_WDATA + 0x100 + 0x20 + + + HOST_SLC_APBWIN_WDATA + 0 + 32 + read-write + + + + + HOST_SLC_APBWIN_CONF + 0x104 + 0x20 + + + HOST_SLC_APBWIN_ADDR + 0 + 28 + read-write + + + HOST_SLC_APBWIN_WR + 28 + 1 + read-write + + + HOST_SLC_APBWIN_START + 29 + 1 + read-write + + + + + HOST_SLC_APBWIN_RDATA + 0x108 + 0x20 + + + HOST_SLC_APBWIN_RDATA + 0 + 32 + read-only + + + + + HOST_SLCHOST_RDCLR0 + 0x10C + 0x20 + 0x0003C044 + + + HOST_SLCHOST_SLC0_BIT7_CLRADDR + 0 + 9 + read-write + + + HOST_SLCHOST_SLC0_BIT6_CLRADDR + 9 + 9 + read-write + + + + + HOST_SLCHOST_RDCLR1 + 0x110 + 0x20 + 0x0003C1E0 + + + HOST_SLCHOST_SLC1_BIT7_CLRADDR + 0 + 9 + read-write + + + HOST_SLCHOST_SLC1_BIT6_CLRADDR + 9 + 9 + read-write + + + + + HOST_SLC0HOST_INT_ENA1 + 0x114 + 0x20 + + + HOST_SLC0_TOHOST_BIT0_INT_ENA1 + 0 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT1_INT_ENA1 + 1 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT2_INT_ENA1 + 2 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT3_INT_ENA1 + 3 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT4_INT_ENA1 + 4 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT5_INT_ENA1 + 5 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT6_INT_ENA1 + 6 + 1 + read-write + + + HOST_SLC0_TOHOST_BIT7_INT_ENA1 + 7 + 1 + read-write + + + HOST_SLC0_TOKEN0_1TO0_INT_ENA1 + 8 + 1 + read-write + + + HOST_SLC0_TOKEN1_1TO0_INT_ENA1 + 9 + 1 + read-write + + + HOST_SLC0_TOKEN0_0TO1_INT_ENA1 + 10 + 1 + read-write + + + HOST_SLC0_TOKEN1_0TO1_INT_ENA1 + 11 + 1 + read-write + + + HOST_SLC0HOST_RX_SOF_INT_ENA1 + 12 + 1 + read-write + + + HOST_SLC0HOST_RX_EOF_INT_ENA1 + 13 + 1 + read-write + + + HOST_SLC0HOST_RX_START_INT_ENA1 + 14 + 1 + read-write + + + HOST_SLC0HOST_TX_START_INT_ENA1 + 15 + 1 + read-write + + + HOST_SLC0_RX_UDF_INT_ENA1 + 16 + 1 + read-write + + + HOST_SLC0_TX_OVF_INT_ENA1 + 17 + 1 + read-write + + + HOST_SLC0_RX_PF_VALID_INT_ENA1 + 18 + 1 + read-write + + + HOST_SLC0_EXT_BIT0_INT_ENA1 + 19 + 1 + read-write + + + HOST_SLC0_EXT_BIT1_INT_ENA1 + 20 + 1 + read-write + + + HOST_SLC0_EXT_BIT2_INT_ENA1 + 21 + 1 + read-write + + + HOST_SLC0_EXT_BIT3_INT_ENA1 + 22 + 1 + read-write + + + HOST_SLC0_RX_NEW_PACKET_INT_ENA1 + 23 + 1 + read-write + + + HOST_SLC0_HOST_RD_RETRY_INT_ENA1 + 24 + 1 + read-write + + + HOST_GPIO_SDIO_INT_ENA1 + 25 + 1 + read-write + + + + + HOST_SLC1HOST_INT_ENA1 + 0x118 + 0x20 + + + HOST_SLC1_TOHOST_BIT0_INT_ENA1 + 0 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT1_INT_ENA1 + 1 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT2_INT_ENA1 + 2 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT3_INT_ENA1 + 3 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT4_INT_ENA1 + 4 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT5_INT_ENA1 + 5 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT6_INT_ENA1 + 6 + 1 + read-write + + + HOST_SLC1_TOHOST_BIT7_INT_ENA1 + 7 + 1 + read-write + + + HOST_SLC1_TOKEN0_1TO0_INT_ENA1 + 8 + 1 + read-write + + + HOST_SLC1_TOKEN1_1TO0_INT_ENA1 + 9 + 1 + read-write + + + HOST_SLC1_TOKEN0_0TO1_INT_ENA1 + 10 + 1 + read-write + + + HOST_SLC1_TOKEN1_0TO1_INT_ENA1 + 11 + 1 + read-write + + + HOST_SLC1HOST_RX_SOF_INT_ENA1 + 12 + 1 + read-write + + + HOST_SLC1HOST_RX_EOF_INT_ENA1 + 13 + 1 + read-write + + + HOST_SLC1HOST_RX_START_INT_ENA1 + 14 + 1 + read-write + + + HOST_SLC1HOST_TX_START_INT_ENA1 + 15 + 1 + read-write + + + HOST_SLC1_RX_UDF_INT_ENA1 + 16 + 1 + read-write + + + HOST_SLC1_TX_OVF_INT_ENA1 + 17 + 1 + read-write + + + HOST_SLC1_RX_PF_VALID_INT_ENA1 + 18 + 1 + read-write + + + HOST_SLC1_EXT_BIT0_INT_ENA1 + 19 + 1 + read-write + + + HOST_SLC1_EXT_BIT1_INT_ENA1 + 20 + 1 + read-write + + + HOST_SLC1_EXT_BIT2_INT_ENA1 + 21 + 1 + read-write + + + HOST_SLC1_EXT_BIT3_INT_ENA1 + 22 + 1 + read-write + + + HOST_SLC1_WIFI_RX_NEW_PACKET_INT_ENA1 + 23 + 1 + read-write + + + HOST_SLC1_HOST_RD_RETRY_INT_ENA1 + 24 + 1 + read-write + + + HOST_SLC1_BT_RX_NEW_PACKET_INT_ENA1 + 25 + 1 + read-write + + + + + HOST_SLCHOSTDATE + 0x178 + 0x20 + 0x16022500 + + + HOST_SLCHOST_DATE + 0 + 32 + read-write + + + + + HOST_SLCHOSTID + 0x17C + 0x20 + 0x00000600 + + + HOST_SLCHOST_ID + 0 + 32 + read-write + + + + + HOST_SLCHOST_CONF + 0x1F0 + 0x20 + + + HOST_FRC_SDIO11 + 0 + 5 + read-write + + + HOST_FRC_SDIO20 + 5 + 5 + read-write + + + HOST_FRC_NEG_SAMP + 10 + 5 + read-write + + + HOST_FRC_POS_SAMP + 15 + 5 + read-write + + + HOST_FRC_QUICK_IN + 20 + 5 + read-write + + + HOST_SDIO20_INT_DELAY + 25 + 1 + read-write + + + HOST_SDIO_PAD_PULLUP + 26 + 1 + read-write + + + HOST_HSPEED_CON_EN + 27 + 1 + read-write + + + + + HOST_SLCHOST_INF_ST + 0x1F4 + 0x20 + + + HOST_SDIO20_MODE + 0 + 5 + read-only + + + HOST_SDIO_NEG_SAMP + 5 + 5 + read-only + + + HOST_SDIO_QUICK_IN + 10 + 5 + read-only + + + + + + + SPI0 + SPI (Serial Peripheral Interface) Controller + SPI + 0x3FF43000 + + 0x0 + 0x110 + registers + + + SPI0 + 28 + + + + CMD + 0x0 + 0x20 + + + FLASH_PER + program erase resume bit program erase suspend operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable. + 16 + 1 + read-write + + + FLASH_PES + program erase suspend bit program erase suspend operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable. + 17 + 1 + read-write + + + USR + User define command enable. An operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable. + 18 + 1 + read-write + + + FLASH_HPM + Drive Flash into high performance mode. The bit will be cleared once the operation done.1: enable 0: disable. + 19 + 1 + read-write + + + FLASH_RES + This bit combined with reg_resandres bit releases Flash from the power-down state or high performance mode and obtains the devices ID. The bit will be cleared once the operation done.1: enable 0: disable. + 20 + 1 + read-write + + + FLASH_DP + Drive Flash into power down. An operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable. + 21 + 1 + read-write + + + FLASH_CE + Chip erase enable. Chip erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable. + 22 + 1 + read-write + + + FLASH_BE + Block erase enable. A 64KB block is erased via SPI command D8H. Block erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable. + 23 + 1 + read-write + + + FLASH_SE + Sector erase enable. A 4KB sector is erased via SPI command 20H. Sector erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable. + 24 + 1 + read-write + + + FLASH_PP + Page program enable(1 byte ~256 bytes data to be programmed). Page program operation will be triggered when the bit is set. The bit will be cleared once the operation done .1: enable 0: disable. + 25 + 1 + read-write + + + FLASH_WRSR + Write status register enable. Write status operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable. + 26 + 1 + read-write + + + FLASH_RDSR + Read status register-1. Read status operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable. + 27 + 1 + read-write + + + FLASH_RDID + Read JEDEC ID . Read ID command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable. + 28 + 1 + read-write + + + FLASH_WRDI + Write flash disable. Write disable command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable. + 29 + 1 + read-write + + + FLASH_WREN + Write flash enable. Write enable command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable. + 30 + 1 + read-write + + + FLASH_READ + Read flash enable. Read flash operation will be triggered when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable. + 31 + 1 + read-write + + + + + ADDR + 0x4 + 0x20 + + + CTRL + 0x8 + 0x20 + 0x0020A400 + + + FCS_CRC_EN + For SPI1 initialize crc32 module before writing encrypted data to flash. Active low. + 10 + 1 + read-write + + + TX_CRC_EN + For SPI1 enable crc32 when writing encrypted data to flash. 1: enable 0:disable + 11 + 1 + read-write + + + WAIT_FLASH_IDLE_EN + wait flash idle when program flash or erase flash. 1: enable 0: disable. + 12 + 1 + read-write + + + FASTRD_MODE + This bit enable the bits: spi_fread_qio spi_fread_dio spi_fread_qout and spi_fread_dout. 1: enable 0: disable. + 13 + 1 + read-write + + + FREAD_DUAL + In the read operations read-data phase apply 2 signals. 1: enable 0: disable. + 14 + 1 + read-write + + + RESANDRES + The Device ID is read out to SPI_RD_STATUS register, this bit combine with spi_flash_res bit. 1: enable 0: disable. + 15 + 1 + read-write + + + FREAD_QUAD + In the read operations read-data phase apply 4 signals. 1: enable 0: disable. + 20 + 1 + read-write + + + WP + Write protect signal output when SPI is idle. 1: output high 0: output low. + 21 + 1 + read-write + + + WRSR_2B + two bytes data will be written to status register when it is set. 1: enable 0: disable. + 22 + 1 + read-write + + + FREAD_DIO + In the read operations address phase and read-data phase apply 2 signals. 1: enable 0: disable. + 23 + 1 + read-write + + + FREAD_QIO + In the read operations address phase and read-data phase apply 4 signals. 1: enable 0: disable. + 24 + 1 + read-write + + + RD_BIT_ORDER + In read-data (MISO) phase 1: LSB first 0: MSB first + 25 + 1 + read-write + + + WR_BIT_ORDER + In command address write-data (MOSI) phases 1: LSB firs 0: MSB first + 26 + 1 + read-write + + + + + CTRL1 + 0xC + 0x20 + 0x5FFF0000 + + + CS_HOLD_DELAY_RES + Delay cycles of resume Flash when resume Flash is enable by spi clock. + 16 + 12 + read-write + + + CS_HOLD_DELAY + SPI cs signal is delayed by spi clock cycles + 28 + 4 + read-write + + + + + RD_STATUS + 0x10 + 0x20 + + + STATUS + In the slave mode, it is the status for master to read out. + 0 + 16 + read-write + + + WB_MODE + Mode bits in the flash fast read mode, it is combined with spi_fastrd_mode bit. + 16 + 8 + read-write + + + STATUS_EXT + In the slave mode,it is the status for master to read out. + 24 + 8 + read-write + + + + + CTRL2 + 0x14 + 0x20 + 0x00000011 + + + SETUP_TIME + (cycles-1) of ¡°prepare¡± phase by spi clock, this bits combined with spi_cs_setup bit. + 0 + 4 + read-write + + + HOLD_TIME + delay cycles of cs pin by spi clock, this bits combined with spi_cs_hold bit. + 4 + 4 + read-write + + + CK_OUT_LOW_MODE + modify spi clock duty ratio when the value is lager than 8, the bits are combined with spi_clkcnt_N bits and spi_clkcnt_L bits. + 8 + 4 + read-write + + + CK_OUT_HIGH_MODE + modify spi clock duty ratio when the value is lager than 8, the bits are combined with spi_clkcnt_N bits and spi_clkcnt_H bits. + 12 + 4 + read-write + + + MISO_DELAY_MODE + MISO signals are delayed by spi_clk. 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle + 16 + 2 + read-write + + + MISO_DELAY_NUM + MISO signals are delayed by system clock cycles + 18 + 3 + read-write + + + MOSI_DELAY_MODE + MOSI signals are delayed by spi_clk. 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle + 21 + 2 + read-write + + + MOSI_DELAY_NUM + MOSI signals are delayed by system clock cycles + 23 + 3 + read-write + + + CS_DELAY_MODE + spi_cs signal is delayed by spi_clk . 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle + 26 + 2 + read-write + + + CS_DELAY_NUM + spi_cs signal is delayed by system clock cycles + 28 + 4 + read-write + + + + + CLOCK + 0x18 + 0x20 + 0x80003043 + + + CLKCNT_L + In the master mode it must be equal to spi_clkcnt_N. In the slave mode it must be 0. + 0 + 6 + read-write + + + CLKCNT_H + In the master mode it must be floor((spi_clkcnt_N+1)/2-1). In the slave mode it must be 0. + 6 + 6 + read-write + + + CLKCNT_N + In the master mode it is the divider of spi_clk. So spi_clk frequency is system/(spi_clkdiv_pre+1)/(spi_clkcnt_N+1) + 12 + 6 + read-write + + + CLKDIV_PRE + In the master mode it is pre-divider of spi_clk. + 18 + 13 + read-write + + + CLK_EQU_SYSCLK + In the master mode 1: spi_clk is eqaul to system 0: spi_clk is divided from system clock. + 31 + 1 + read-write + + + + + USER + 0x1C + 0x20 + 0x80000040 + + + DOUTDIN + Set the bit to enable full duplex communication. 1: enable 0: disable. + 0 + 1 + read-write + + + CS_HOLD + spi cs keep low when spi is in ¡°done¡± phase. 1: enable 0: disable. + 4 + 1 + read-write + + + CS_SETUP + spi cs is enable when spi is in ¡°prepare¡± phase. 1: enable 0: disable. + 5 + 1 + read-write + + + CK_I_EDGE + In the slave mode the bit is same as spi_ck_out_edge in master mode. It is combined with spi_miso_delay_mode bits. + 6 + 1 + read-write + + + CK_OUT_EDGE + the bit combined with spi_mosi_delay_mode bits to set mosi signal delay mode. + 7 + 1 + read-write + + + RD_BYTE_ORDER + In read-data (MISO) phase 1: big-endian 0: little_endian + 10 + 1 + read-write + + + WR_BYTE_ORDER + In command address write-data (MOSI) phases 1: big-endian 0: litte_endian + 11 + 1 + read-write + + + FWRITE_DUAL + In the write operations read-data phase apply 2 signals + 12 + 1 + read-write + + + FWRITE_QUAD + In the write operations read-data phase apply 4 signals + 13 + 1 + read-write + + + FWRITE_DIO + In the write operations address phase and read-data phase apply 2 signals. + 14 + 1 + read-write + + + FWRITE_QIO + In the write operations address phase and read-data phase apply 4 signals. + 15 + 1 + read-write + + + SIO + Set the bit to enable 3-line half duplex communication mosi and miso signals share the same pin. 1: enable 0: disable. + 16 + 1 + read-write + + + USR_HOLD_POL + It is combined with hold bits to set the polarity of spi hold line 1: spi will be held when spi hold line is high 0: spi will be held when spi hold line is low + 17 + 1 + read-write + + + USR_DOUT_HOLD + spi is hold at data out state the bit combined with spi_usr_hold_pol bit. + 18 + 1 + read-write + + + USR_DIN_HOLD + spi is hold at data in state the bit combined with spi_usr_hold_pol bit. + 19 + 1 + read-write + + + USR_DUMMY_HOLD + spi is hold at dummy state the bit combined with spi_usr_hold_pol bit. + 20 + 1 + read-write + + + USR_ADDR_HOLD + spi is hold at address state the bit combined with spi_usr_hold_pol bit. + 21 + 1 + read-write + + + USR_CMD_HOLD + spi is hold at command state the bit combined with spi_usr_hold_pol bit. + 22 + 1 + read-write + + + USR_PREP_HOLD + spi is hold at prepare state the bit combined with spi_usr_hold_pol bit. + 23 + 1 + read-write + + + USR_MISO_HIGHPART + read-data phase only access to high-part of the buffer spi_w8~spi_w15. 1: enable 0: disable. + 24 + 1 + read-write + + + USR_MOSI_HIGHPART + write-data phase only access to high-part of the buffer spi_w8~spi_w15. 1: enable 0: disable. + 25 + 1 + read-write + + + USR_DUMMY_IDLE + spi clock is disable in dummy phase when the bit is enable. + 26 + 1 + read-write + + + USR_MOSI + This bit enable the write-data phase of an operation. + 27 + 1 + read-write + + + USR_MISO + This bit enable the read-data phase of an operation. + 28 + 1 + read-write + + + USR_DUMMY + This bit enable the dummy phase of an operation. + 29 + 1 + read-write + + + USR_ADDR + This bit enable the address phase of an operation. + 30 + 1 + read-write + + + USR_COMMAND + This bit enable the command phase of an operation. + 31 + 1 + read-write + + + + + USER1 + 0x20 + 0x20 + 0x5C000007 + + + USR_DUMMY_CYCLELEN + The length in spi_clk cycles of dummy phase. The register value shall be (cycle_num-1). + 0 + 8 + read-write + + + USR_ADDR_BITLEN + The length in bits of address phase. The register value shall be (bit_num-1). + 26 + 6 + read-only + + + + + USER2 + 0x24 + 0x20 + 0x70000000 + + + USR_COMMAND_VALUE + The value of command. + 0 + 16 + read-write + + + USR_COMMAND_BITLEN + The length in bits of command phase. The register value shall be (bit_num-1) + 28 + 4 + read-write + + + + + MOSI_DLEN + 0x28 + 0x20 + + + USR_MOSI_DBITLEN + The length in bits of write-data. The register value shall be (bit_num-1). + 0 + 24 + read-write + + + + + MISO_DLEN + 0x2C + 0x20 + + + USR_MISO_DBITLEN + The length in bits of read-data. The register value shall be (bit_num-1). + 0 + 24 + read-write + + + + + SLV_WR_STATUS + 0x30 + 0x20 + + + SLV_WR_ST + In the slave mode this register are the status register for the master to write into. In the master mode this register are the higher 32bits in the 64 bits address condition. + 0 + 32 + read-write + + + + + PIN + 0x34 + 0x20 + 0x00000006 + + + CS0_DIS + SPI CS0 pin enable, 1: disable CS0, 0: spi_cs0 signal is from/to CS0 pin + 0 + 1 + read-write + + + CS1_DIS + SPI CS1 pin enable, 1: disable CS1, 0: spi_cs1 signal is from/to CS1 pin + 1 + 1 + read-write + + + CS2_DIS + SPI CS2 pin enable, 1: disable CS2, 0: spi_cs2 signal is from/to CS2 pin + 2 + 1 + read-write + + + CK_DIS + 1: spi clk out disable 0: spi clk out enable + 5 + 1 + read-write + + + MASTER_CS_POL + In the master mode the bits are the polarity of spi cs line the value is equivalent to spi_cs ^ spi_master_cs_pol. + 6 + 3 + read-write + + + MASTER_CK_SEL + In the master mode spi cs line is enable as spi clk it is combined with spi_cs0_dis spi_cs1_dis spi_cs2_dis. + 11 + 3 + read-write + + + CK_IDLE_EDGE + 1: spi clk line is high when idle 0: spi clk line is low when idle + 29 + 1 + read-write + + + CS_KEEP_ACTIVE + spi cs line keep low when the bit is set. + 30 + 1 + read-write + + + + + SLAVE + 0x38 + 0x20 + 0x00000020 + + + SLV_RD_BUF_DONE + The interrupt raw bit for the completion of read-buffer operation in the slave mode. + 0 + 1 + read-write + + + SLV_WR_BUF_DONE + The interrupt raw bit for the completion of write-buffer operation in the slave mode. + 1 + 1 + read-write + + + SLV_RD_STA_DONE + The interrupt raw bit for the completion of read-status operation in the slave mode. + 2 + 1 + read-write + + + SLV_WR_STA_DONE + The interrupt raw bit for the completion of write-status operation in the slave mode. + 3 + 1 + read-write + + + TRANS_DONE + The interrupt raw bit for the completion of any operation in both the master mode and the slave mode. + 4 + 1 + read-write + + + INT_EN + Interrupt enable bits for the below 5 sources + 5 + 5 + read-write + + + CS_I_MODE + In the slave mode this bits used to synchronize the input spi cs signal and eliminate spi cs jitter. + 10 + 2 + read-write + + + SLV_LAST_COMMAND + In the slave mode it is the value of command. + 17 + 3 + read-only + + + SLV_LAST_STATE + In the slave mode it is the state of spi state machine. + 20 + 3 + read-only + + + TRANS_CNT + The operations counter in both the master mode and the slave mode. 4: read-status + 23 + 4 + read-only + + + SLV_CMD_DEFINE + 1: slave mode commands are defined in SPI_SLAVE3. 0: slave mode commands are fixed as: 1: write-status 2: write-buffer and 3: read-buffer. + 27 + 1 + read-write + + + SLV_WR_RD_STA_EN + write and read status enable in the slave mode + 28 + 1 + read-write + + + SLV_WR_RD_BUF_EN + write and read buffer enable in the slave mode + 29 + 1 + read-write + + + MODE + 1: slave mode 0: master mode. + 30 + 1 + read-write + + + SYNC_RESET + Software reset enable, reset the spi clock line cs line and data lines. + 31 + 1 + read-write + + + + + SLAVE1 + 0x3C + 0x20 + 0x02000000 + + + SLV_RDBUF_DUMMY_EN + In the slave mode it is the enable bit of dummy phase for read-buffer operations. + 0 + 1 + read-write + + + SLV_WRBUF_DUMMY_EN + In the slave mode it is the enable bit of dummy phase for write-buffer operations. + 1 + 1 + read-write + + + SLV_RDSTA_DUMMY_EN + In the slave mode it is the enable bit of dummy phase for read-status operations. + 2 + 1 + read-write + + + SLV_WRSTA_DUMMY_EN + In the slave mode it is the enable bit of dummy phase for write-status operations. + 3 + 1 + read-write + + + SLV_WR_ADDR_BITLEN + In the slave mode it is the address length in bits for write-buffer operation. The register value shall be (bit_num-1). + 4 + 6 + read-write + + + SLV_RD_ADDR_BITLEN + In the slave mode it is the address length in bits for read-buffer operation. The register value shall be (bit_num-1). + 10 + 6 + read-write + + + SLV_STATUS_READBACK + In the slave mode 1:read register of SPI_SLV_WR_STATUS 0: read register of SPI_RD_STATUS. + 25 + 1 + read-write + + + SLV_STATUS_FAST_EN + In the slave mode enable fast read status. + 26 + 1 + read-write + + + SLV_STATUS_BITLEN + In the slave mode it is the length of status bit. + 27 + 5 + read-write + + + + + SLAVE2 + 0x40 + 0x20 + + + SLV_RDSTA_DUMMY_CYCLELEN + In the slave mode it is the length in spi_clk cycles of dummy phase for read-status operations. The register value shall be (cycle_num-1). + 0 + 8 + read-write + + + SLV_WRSTA_DUMMY_CYCLELEN + In the slave mode it is the length in spi_clk cycles of dummy phase for write-status operations. The register value shall be (cycle_num-1). + 8 + 8 + read-write + + + SLV_RDBUF_DUMMY_CYCLELEN + In the slave mode it is the length in spi_clk cycles of dummy phase for read-buffer operations. The register value shall be (cycle_num-1). + 16 + 8 + read-write + + + SLV_WRBUF_DUMMY_CYCLELEN + In the slave mode it is the length in spi_clk cycles of dummy phase for write-buffer operations. The register value shall be (cycle_num-1). + 24 + 8 + read-write + + + + + SLAVE3 + 0x44 + 0x20 + + + SLV_RDBUF_CMD_VALUE + In the slave mode it is the value of read-buffer command. + 0 + 8 + read-write + + + SLV_WRBUF_CMD_VALUE + In the slave mode it is the value of write-buffer command. + 8 + 8 + read-write + + + SLV_RDSTA_CMD_VALUE + In the slave mode it is the value of read-status command. + 16 + 8 + read-write + + + SLV_WRSTA_CMD_VALUE + In the slave mode it is the value of write-status command. + 24 + 8 + read-write + + + + + SLV_WRBUF_DLEN + 0x48 + 0x20 + + + SLV_WRBUF_DBITLEN + In the slave mode it is the length in bits for write-buffer operations. The register value shall be (bit_num-1). + 0 + 24 + read-write + + + + + SLV_RDBUF_DLEN + 0x4C + 0x20 + + + SLV_RDBUF_DBITLEN + In the slave mode it is the length in bits for read-buffer operations. The register value shall be (bit_num-1). + 0 + 24 + read-write + + + + + CACHE_FCTRL + 0x50 + 0x20 + + + CACHE_REQ_EN + For SPI0 Cache access enable 1: enable 0:disable. + 0 + 1 + read-write + + + CACHE_USR_CMD_4BYTE + For SPI0 cache read flash with 4 bytes command 1: enable 0:disable. + 1 + 1 + read-write + + + CACHE_FLASH_USR_CMD + For SPI0 cache read flash for user define command 1: enable 0:disable. + 2 + 1 + read-write + + + CACHE_FLASH_PES_EN + For SPI0 spi1 send suspend command before cache read flash 1: enable 0:disable. + 3 + 1 + read-write + + + + + CACHE_SCTRL + 0x54 + 0x20 + 0x15C04830 + + + USR_SRAM_DIO + For SPI0 In the spi sram mode spi dual I/O mode enable 1: enable 0:disable + 1 + 1 + read-write + + + USR_SRAM_QIO + For SPI0 In the spi sram mode spi quad I/O mode enable 1: enable 0:disable + 2 + 1 + read-write + + + USR_WR_SRAM_DUMMY + For SPI0 In the spi sram mode it is the enable bit of dummy phase for write operations. + 3 + 1 + read-write + + + USR_RD_SRAM_DUMMY + For SPI0 In the spi sram mode it is the enable bit of dummy phase for read operations. + 4 + 1 + read-write + + + CACHE_SRAM_USR_RCMD + For SPI0 In the spi sram mode cache read sram for user define command. + 5 + 1 + read-write + + + SRAM_BYTES_LEN + For SPI0 In the sram mode it is the byte length of spi read sram data. + 6 + 8 + read-write + + + SRAM_DUMMY_CYCLELEN + For SPI0 In the sram mode it is the length in bits of address phase. The register value shall be (bit_num-1). + 14 + 8 + read-write + + + SRAM_ADDR_BITLEN + For SPI0 In the sram mode it is the length in bits of address phase. The register value shall be (bit_num-1). + 22 + 6 + read-write + + + CACHE_SRAM_USR_WCMD + For SPI0 In the spi sram mode cache write sram for user define command + 28 + 1 + read-write + + + + + SRAM_CMD + 0x58 + 0x20 + + + SRAM_DIO + For SPI0 SRAM DIO mode enable . SRAM DIO enable command will be send when the bit is set. The bit will be cleared once the operation done. + 0 + 1 + read-write + + + SRAM_QIO + For SPI0 SRAM QIO mode enable . SRAM QIO enable command will be send when the bit is set. The bit will be cleared once the operation done. + 1 + 1 + read-write + + + SRAM_RSTIO + For SPI0 SRAM IO mode reset enable. SRAM IO mode reset operation will be triggered when the bit is set. The bit will be cleared once the operation done + 4 + 1 + read-write + + + + + SRAM_DRD_CMD + 0x5C + 0x20 + + + CACHE_SRAM_USR_RD_CMD_VALUE + For SPI0 When cache mode is enable it is the read command value of command phase for SRAM. + 0 + 16 + read-write + + + CACHE_SRAM_USR_RD_CMD_BITLEN + For SPI0 When cache mode is enable it is the length in bits of command phase for SRAM. The register value shall be (bit_num-1). + 28 + 4 + read-write + + + + + SRAM_DWR_CMD + 0x60 + 0x20 + + + CACHE_SRAM_USR_WR_CMD_VALUE + For SPI0 When cache mode is enable it is the write command value of command phase for SRAM. + 0 + 16 + read-write + + + CACHE_SRAM_USR_WR_CMD_BITLEN + For SPI0 When cache mode is enable it is the in bits of command phase for SRAM. The register value shall be (bit_num-1). + 28 + 4 + read-write + + + + + SLV_RD_BIT + 0x64 + 0x20 + + + SLV_RDATA_BIT + In the slave mode it is the bit length of read data. The value is the length - 1. + 0 + 24 + read-write + + + + + W0 + 0x80 + 0x20 + + + BUF0 + data buffer + 0 + 32 + read-write + + + + + W1 + 0x84 + 0x20 + + + BUF1 + data buffer + 0 + 32 + read-write + + + + + W2 + 0x88 + 0x20 + + + BUF2 + data buffer + 0 + 32 + read-write + + + + + W3 + 0x8C + 0x20 + + + BUF3 + data buffer + 0 + 32 + read-write + + + + + W4 + 0x90 + 0x20 + + + BUF4 + data buffer + 0 + 32 + read-write + + + + + W5 + 0x94 + 0x20 + + + BUF5 + data buffer + 0 + 32 + read-write + + + + + W6 + 0x98 + 0x20 + + + BUF6 + data buffer + 0 + 32 + read-write + + + + + W7 + 0x9C + 0x20 + + + BUF7 + data buffer + 0 + 32 + read-write + + + + + W8 + 0xA0 + 0x20 + + + BUF8 + data buffer + 0 + 32 + read-write + + + + + W9 + 0xA4 + 0x20 + + + BUF9 + data buffer + 0 + 32 + read-write + + + + + W10 + 0xA8 + 0x20 + + + BUF10 + data buffer + 0 + 32 + read-write + + + + + W11 + 0xAC + 0x20 + + + BUF11 + data buffer + 0 + 32 + read-write + + + + + W12 + 0xB0 + 0x20 + + + BUF12 + data buffer + 0 + 32 + read-write + + + + + W13 + 0xB4 + 0x20 + + + BUF13 + data buffer + 0 + 32 + read-write + + + + + W14 + 0xB8 + 0x20 + + + BUF14 + data buffer + 0 + 32 + read-write + + + + + W15 + 0xBC + 0x20 + + + BUF15 + data buffer + 0 + 32 + read-write + + + + + TX_CRC + 0xC0 + 0x20 + + + DATA + For SPI1 the value of crc32 for 256 bits data. + 0 + 32 + read-write + + + + + EXT0 + 0xF0 + 0x20 + 0x800A0050 + + + T_PP_TIME + page program delay time by system clock. + 0 + 12 + read-write + + + T_PP_SHIFT + page program delay time shift . + 16 + 4 + read-write + + + T_PP_ENA + page program delay enable. + 31 + 1 + read-write + + + + + EXT1 + 0xF4 + 0x20 + 0x800F0000 + + + T_ERASE_TIME + erase flash delay time by system clock. + 0 + 12 + read-write + + + T_ERASE_SHIFT + erase flash delay time shift. + 16 + 4 + read-write + + + T_ERASE_ENA + erase flash delay enable. + 31 + 1 + read-write + + + + + EXT2 + 0xF8 + 0x20 + + + ST + The status of spi state machine . + 0 + 3 + read-only + + + + + EXT3 + 0xFC + 0x20 + + + INT_HOLD_ENA + This register is for two SPI masters to share the same cs clock and data signals. The bits of one SPI are set if the other SPI is busy the SPI will be hold. 1(3): hold at ¡°idle¡± phase 2: hold at ¡°prepare¡± phase. + 0 + 2 + read-write + + + + + DMA_CONF + 0x100 + 0x20 + 0x00000200 + + + IN_RST + The bit is used to reset in dma fsm and in data fifo pointer. + 2 + 1 + read-write + + + OUT_RST + The bit is used to reset out dma fsm and out data fifo pointer. + 3 + 1 + read-write + + + AHBM_FIFO_RST + reset spi dma ahb master fifo pointer. + 4 + 1 + read-write + + + AHBM_RST + reset spi dma ahb master. + 5 + 1 + read-write + + + IN_LOOP_TEST + Set bit to test in link. + 6 + 1 + read-write + + + OUT_LOOP_TEST + Set bit to test out link. + 7 + 1 + read-write + + + OUT_AUTO_WRBACK + when the link is empty jump to next automatically. + 8 + 1 + read-write + + + OUT_EOF_MODE + out eof flag generation mode . 1: when dma pop all data from fifo 0:when ahb push all data to fifo. + 9 + 1 + read-write + + + OUTDSCR_BURST_EN + read descriptor use burst mode when read data for memory. + 10 + 1 + read-write + + + INDSCR_BURST_EN + read descriptor use burst mode when write data to memory. + 11 + 1 + read-write + + + OUT_DATA_BURST_EN + spi dma read data from memory in burst mode. + 12 + 1 + read-write + + + DMA_RX_STOP + spi dma read data stop when in continue tx/rx mode. + 14 + 1 + read-write + + + DMA_TX_STOP + spi dma write data stop when in continue tx/rx mode. + 15 + 1 + read-write + + + DMA_CONTINUE + spi dma continue tx/rx data. + 16 + 1 + read-write + + + + + DMA_OUT_LINK + 0x104 + 0x20 + + + OUTLINK_ADDR + The address of the first outlink descriptor. + 0 + 20 + read-write + + + OUTLINK_STOP + Set the bit to stop to use outlink descriptor. + 28 + 1 + read-write + + + OUTLINK_START + Set the bit to start to use outlink descriptor. + 29 + 1 + read-write + + + OUTLINK_RESTART + Set the bit to mount on new outlink descriptors. + 30 + 1 + read-write + + + + + DMA_IN_LINK + 0x108 + 0x20 + + + INLINK_ADDR + The address of the first inlink descriptor. + 0 + 20 + read-write + + + INLINK_AUTO_RET + when the bit is set inlink descriptor returns to the next descriptor while a packet is wrong + 20 + 1 + read-write + + + INLINK_STOP + Set the bit to stop to use inlink descriptor. + 28 + 1 + read-write + + + INLINK_START + Set the bit to start to use inlink descriptor. + 29 + 1 + read-write + + + INLINK_RESTART + Set the bit to mount on new inlink descriptors. + 30 + 1 + read-write + + + + + DMA_STATUS + 0x10C + 0x20 + + + DMA_RX_EN + spi dma read data status bit. + 0 + 1 + read-only + + + DMA_TX_EN + spi dma write data status bit. + 1 + 1 + read-only + + + + + DMA_INT_ENA + 0x110 + 0x20 + + + INLINK_DSCR_EMPTY_INT_ENA + The enable bit for lack of enough inlink descriptors. + 0 + 1 + read-write + + + OUTLINK_DSCR_ERROR_INT_ENA + The enable bit for outlink descriptor error. + 1 + 1 + read-write + + + INLINK_DSCR_ERROR_INT_ENA + The enable bit for inlink descriptor error. + 2 + 1 + read-write + + + IN_DONE_INT_ENA + The enable bit for completing usage of a inlink descriptor. + 3 + 1 + read-write + + + IN_ERR_EOF_INT_ENA + The enable bit for receiving error. + 4 + 1 + read-write + + + IN_SUC_EOF_INT_ENA + The enable bit for completing receiving all the packets from host. + 5 + 1 + read-write + + + OUT_DONE_INT_ENA + The enable bit for completing usage of a outlink descriptor . + 6 + 1 + read-write + + + OUT_EOF_INT_ENA + The enable bit for sending a packet to host done. + 7 + 1 + read-write + + + OUT_TOTAL_EOF_INT_ENA + The enable bit for sending all the packets to host done. + 8 + 1 + read-write + + + + + DMA_INT_RAW + 0x114 + 0x20 + + + INLINK_DSCR_EMPTY_INT_RAW + The raw bit for lack of enough inlink descriptors. + 0 + 1 + read-only + + + OUTLINK_DSCR_ERROR_INT_RAW + The raw bit for outlink descriptor error. + 1 + 1 + read-only + + + INLINK_DSCR_ERROR_INT_RAW + The raw bit for inlink descriptor error. + 2 + 1 + read-only + + + IN_DONE_INT_RAW + The raw bit for completing usage of a inlink descriptor. + 3 + 1 + read-only + + + IN_ERR_EOF_INT_RAW + The raw bit for receiving error. + 4 + 1 + read-only + + + IN_SUC_EOF_INT_RAW + The raw bit for completing receiving all the packets from host. + 5 + 1 + read-only + + + OUT_DONE_INT_RAW + The raw bit for completing usage of a outlink descriptor. + 6 + 1 + read-only + + + OUT_EOF_INT_RAW + The raw bit for sending a packet to host done. + 7 + 1 + read-only + + + OUT_TOTAL_EOF_INT_RAW + The raw bit for sending all the packets to host done. + 8 + 1 + read-only + + + + + DMA_INT_ST + 0x118 + 0x20 + + + INLINK_DSCR_EMPTY_INT_ST + The status bit for lack of enough inlink descriptors. + 0 + 1 + read-only + + + OUTLINK_DSCR_ERROR_INT_ST + The status bit for outlink descriptor error. + 1 + 1 + read-only + + + INLINK_DSCR_ERROR_INT_ST + The status bit for inlink descriptor error. + 2 + 1 + read-only + + + IN_DONE_INT_ST + The status bit for completing usage of a inlink descriptor. + 3 + 1 + read-only + + + IN_ERR_EOF_INT_ST + The status bit for receiving error. + 4 + 1 + read-only + + + IN_SUC_EOF_INT_ST + The status bit for completing receiving all the packets from host. + 5 + 1 + read-only + + + OUT_DONE_INT_ST + The status bit for completing usage of a outlink descriptor. + 6 + 1 + read-only + + + OUT_EOF_INT_ST + The status bit for sending a packet to host done. + 7 + 1 + read-only + + + OUT_TOTAL_EOF_INT_ST + The status bit for sending all the packets to host done. + 8 + 1 + read-only + + + + + DMA_INT_CLR + 0x11C + 0x20 + + + INLINK_DSCR_EMPTY_INT_CLR + The clear bit for lack of enough inlink descriptors. + 0 + 1 + read-write + + + OUTLINK_DSCR_ERROR_INT_CLR + The clear bit for outlink descriptor error. + 1 + 1 + read-write + + + INLINK_DSCR_ERROR_INT_CLR + The clear bit for inlink descriptor error. + 2 + 1 + read-write + + + IN_DONE_INT_CLR + The clear bit for completing usage of a inlink descriptor. + 3 + 1 + read-write + + + IN_ERR_EOF_INT_CLR + The clear bit for receiving error. + 4 + 1 + read-write + + + IN_SUC_EOF_INT_CLR + The clear bit for completing receiving all the packets from host. + 5 + 1 + read-write + + + OUT_DONE_INT_CLR + The clear bit for completing usage of a outlink descriptor. + 6 + 1 + read-write + + + OUT_EOF_INT_CLR + The clear bit for sending a packet to host done. + 7 + 1 + read-write + + + OUT_TOTAL_EOF_INT_CLR + The clear bit for sending all the packets to host done. + 8 + 1 + read-write + + + + + IN_ERR_EOF_DES_ADDR + 0x120 + 0x20 + + + DMA_IN_ERR_EOF_DES_ADDR + The inlink descriptor address when spi dma produce receiving error. + 0 + 32 + read-only + + + + + IN_SUC_EOF_DES_ADDR + 0x124 + 0x20 + + + DMA_IN_SUC_EOF_DES_ADDR + The last inlink descriptor address when spi dma produce from_suc_eof. + 0 + 32 + read-only + + + + + INLINK_DSCR + 0x128 + 0x20 + + + DMA_INLINK_DSCR + The content of current in descriptor pointer. + 0 + 32 + read-only + + + + + INLINK_DSCR_BF0 + 0x12C + 0x20 + + + DMA_INLINK_DSCR_BF0 + The content of next in descriptor pointer. + 0 + 32 + read-only + + + + + INLINK_DSCR_BF1 + 0x130 + 0x20 + + + DMA_INLINK_DSCR_BF1 + The content of current in descriptor data buffer pointer. + 0 + 32 + read-only + + + + + OUT_EOF_BFR_DES_ADDR + 0x134 + 0x20 + + + DMA_OUT_EOF_BFR_DES_ADDR + The address of buffer relative to the outlink descriptor that produce eof. + 0 + 32 + read-only + + + + + OUT_EOF_DES_ADDR + 0x138 + 0x20 + + + DMA_OUT_EOF_DES_ADDR + The last outlink descriptor address when spi dma produce to_eof. + 0 + 32 + read-only + + + + + OUTLINK_DSCR + 0x13C + 0x20 + + + DMA_OUTLINK_DSCR + The content of current out descriptor pointer. + 0 + 32 + read-only + + + + + OUTLINK_DSCR_BF0 + 0x140 + 0x20 + + + DMA_OUTLINK_DSCR_BF0 + The content of next out descriptor pointer. + 0 + 32 + read-only + + + + + OUTLINK_DSCR_BF1 + 0x144 + 0x20 + + + DMA_OUTLINK_DSCR_BF1 + The content of current out descriptor data buffer pointer. + 0 + 32 + read-only + + + + + DMA_RSTATUS + 0x148 + 0x20 + + + DMA_OUT_STATUS + spi dma read data from memory status. + 0 + 32 + read-only + + + + + DMA_TSTATUS + 0x14C + 0x20 + + + DMA_IN_STATUS + spi dma write data to memory status. + 0 + 32 + read-only + + + + + DATE + 0x3FC + 0x20 + 0x01604270 + + + DATE + SPI register version. + 0 + 28 + read-only + + + + + + + SPI1 + SPI (Serial Peripheral Interface) Controller + 0x3FF42000 + + SPI1 + 29 + + + SPI1_DMA + 52 + + + + SPI2 + SPI (Serial Peripheral Interface) Controller + 0x3FF64000 + + SPI2 + 30 + + + SPI2_DMA + 53 + + + + SPI3 + SPI (Serial Peripheral Interface) Controller + 0x3FF65000 + + SPI3 + 31 + + + SPI3_DMA + 54 + + + + TIMG0 + Timer Group + TIMG + 0x3FF5F000 + + 0x0 + 0xB0 + registers + + + TG0_T0_LEVEL + 14 + + + TG0_T1_LEVEL + 15 + + + TG0_WDT_LEVEL + 16 + + + TG0_LACT_LEVEL + 17 + + + TG0_T0_EDGE + 58 + + + TG0_T1_EDGE + 59 + + + TG0_WDT_EDGE + 60 + + + TG0_LACT_EDGE + 61 + + + + T0CONFIG + 0x0 + 0x20 + 0x60002000 + + + ALARM_EN + When set alarm is enabled + 10 + 1 + read-write + + + LEVEL_INT_EN + When set level type interrupt will be generated during alarm + 11 + 1 + read-write + + + EDGE_INT_EN + When set edge type interrupt will be generated during alarm + 12 + 1 + read-write + + + DIVIDER + Timer 0 clock (T0_clk) prescale value. + 13 + 16 + read-write + + + AUTORELOAD + When set timer 0 auto-reload at alarming is enabled + 29 + 1 + read-write + + + INCREASE + When set timer 0 time-base counter increment. When cleared timer 0 time-base counter decrement. + 30 + 1 + read-write + + + EN + When set timer 0 time-base counter is enabled + 31 + 1 + read-write + + + + + T0LO + 0x4 + 0x20 + + + LO + Register to store timer 0 time-base counter current value lower 32 bits. + 0 + 32 + read-only + + + + + T0HI + 0x8 + 0x20 + + + HI + Register to store timer 0 time-base counter current value higher 32 bits. + 0 + 32 + read-only + + + + + T0UPDATE + 0xC + 0x20 + + + UPDATE + Write any value will trigger a timer 0 time-base counter value update (timer 0 current value will be stored in registers above) + 0 + 32 + write-only + + + + + T0ALARMLO + 0x10 + 0x20 + + + ALARM_LO + Timer 0 time-base counter value lower 32 bits that will trigger the alarm + 0 + 32 + read-write + + + + + T0ALARMHI + 0x14 + 0x20 + + + ALARM_HI + Timer 0 time-base counter value higher 32 bits that will trigger the alarm + 0 + 32 + read-write + + + + + T0LOADLO + 0x18 + 0x20 + + + LOAD_LO + Lower 32 bits of the value that will load into timer 0 time-base counter + 0 + 32 + read-write + + + + + T0LOADHI + 0x1C + 0x20 + + + LOAD_HI + higher 32 bits of the value that will load into timer 0 time-base counter + 0 + 32 + read-write + + + + + T0LOAD + 0x20 + 0x20 + + + LOAD + Write any value will trigger timer 0 time-base counter reload + 0 + 32 + write-only + + + + + T1CONFIG + 0x24 + 0x20 + 0x60002000 + + + ALARM_EN + When set alarm is enabled + 10 + 1 + read-write + + + LEVEL_INT_EN + When set level type interrupt will be generated during alarm + 11 + 1 + read-write + + + EDGE_INT_EN + When set edge type interrupt will be generated during alarm + 12 + 1 + read-write + + + DIVIDER + Timer 1 clock (T1_clk) prescale value. + 13 + 16 + read-write + + + AUTORELOAD + When set timer 1 auto-reload at alarming is enabled + 29 + 1 + read-write + + + INCREASE + When set timer 1 time-base counter increment. When cleared timer 1 time-base counter decrement. + 30 + 1 + read-write + + + EN + When set timer 1 time-base counter is enabled + 31 + 1 + read-write + + + + + T1LO + 0x28 + 0x20 + + + LO + Register to store timer 1 time-base counter current value lower 32 bits. + 0 + 32 + read-only + + + + + T1HI + 0x2C + 0x20 + + + HI + Register to store timer 1 time-base counter current value higher 32 bits. + 0 + 32 + read-only + + + + + T1UPDATE + 0x30 + 0x20 + + + UPDATE + Write any value will trigger a timer 1 time-base counter value update (timer 1 current value will be stored in registers above) + 0 + 32 + write-only + + + + + T1ALARMLO + 0x34 + 0x20 + + + ALARM_LO + Timer 1 time-base counter value lower 32 bits that will trigger the alarm + 0 + 32 + read-write + + + + + T1ALARMHI + 0x38 + 0x20 + + + ALARM_HI + Timer 1 time-base counter value higher 32 bits that will trigger the alarm + 0 + 32 + read-write + + + + + T1LOADLO + 0x3C + 0x20 + + + LOAD_LO + Lower 32 bits of the value that will load into timer 1 time-base counter + 0 + 32 + read-write + + + + + T1LOADHI + 0x40 + 0x20 + + + LOAD_HI + higher 32 bits of the value that will load into timer 1 time-base counter + 0 + 32 + read-write + + + + + T1LOAD + 0x44 + 0x20 + + + LOAD + Write any value will trigger timer 1 time-base counter reload + 0 + 32 + write-only + + + + + WDTCONFIG0 + 0x48 + 0x20 + 0x0004C000 + + + WDT_FLASHBOOT_MOD_EN + When set flash boot protection is enabled + 14 + 1 + read-write + + + WDT_SYS_RESET_LENGTH + length of system reset selection. 0: 100ns 1: 200ns 2: 300ns 3: 400ns 4: 500ns 5: 800ns 6: 1.6us 7: 3.2us + 15 + 3 + read-write + + WDT_SYS_RESET_LENGTH + read-write + + NS100 + 100ns + 0 + + + NS200 + 200ns + 1 + + + NS300 + 300ns + 2 + + + NS400 + 400ns + 3 + + + NS500 + 500ns + 4 + + + NS800 + 800ns + 5 + + + NS1600 + 1.6us + 6 + + + NS3200 + 3.2us + 7 + + + + + WDT_CPU_RESET_LENGTH + length of CPU reset selection. 0: 100ns 1: 200ns 2: 300ns 3: 400ns 4: 500ns 5: 800ns 6: 1.6us 7: 3.2us + 18 + 3 + read-write + + WDT_CPU_RESET_LENGTH + read-write + + NS100 + 100ns + 0 + + + NS200 + 200ns + 1 + + + NS300 + 300ns + 2 + + + NS400 + 400ns + 3 + + + NS500 + 500ns + 4 + + + NS800 + 800ns + 5 + + + NS1600 + 1.6us + 6 + + + NS3200 + 3.2us + 7 + + + + + WDT_LEVEL_INT_EN + When set level type interrupt generation is enabled + 21 + 1 + read-write + + + WDT_EDGE_INT_EN + When set edge type interrupt generation is enabled + 22 + 1 + read-write + + + WDT_STG3 + Stage 3 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system + 23 + 2 + read-write + + WDT_STG3 + read-write + + OFF + Off + 0 + + + INTERRUPT + Interrupt + 1 + + + RESET + Reset CPU + 2 + + + RESET_SYS + Reset system + 3 + + + + + WDT_STG2 + Stage 2 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system + 25 + 2 + read-write + + + + WDT_STG1 + Stage 1 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system + 27 + 2 + read-write + + + + WDT_STG0 + Stage 0 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system + 29 + 2 + read-write + + + + WDT_EN + When set SWDT is enabled + 31 + 1 + read-write + + + + + WDTCONFIG1 + 0x4C + 0x20 + 0x00010000 + + + WDT_CLK_PRESCALE + SWDT clock prescale value. Period = 12.5ns * value stored in this register + 16 + 16 + read-write + + + + + WDTCONFIG2 + 0x50 + 0x20 + 0x018CBA80 + + + WDT_STG0_HOLD + Stage 0 timeout value in SWDT clock cycles + 0 + 32 + read-write + + + + + WDTCONFIG3 + 0x54 + 0x20 + 0x07FFFFFF + + + WDT_STG1_HOLD + Stage 1 timeout value in SWDT clock cycles + 0 + 32 + read-write + + + + + WDTCONFIG4 + 0x58 + 0x20 + 0x000FFFFF + + + WDT_STG2_HOLD + Stage 2 timeout value in SWDT clock cycles + 0 + 32 + read-write + + + + + WDTCONFIG5 + 0x5C + 0x20 + 0x000FFFFF + + + WDT_STG3_HOLD + Stage 3 timeout value in SWDT clock cycles + 0 + 32 + read-write + + + + + WDTFEED + 0x60 + 0x20 + + + WDT_FEED + Write any value will feed SWDT + 0 + 32 + write-only + + + + + WDTWPROTECT + 0x64 + 0x20 + 0x50D83AA1 + + + WDT_WKEY + If change its value from default then write protection is on. + 0 + 32 + read-write + + + + + RTCCALICFG + 0x68 + 0x20 + 0x00013000 + + + RTC_CALI_START_CYCLING + 12 + 1 + read-write + + + RTC_CALI_CLK_SEL + 13 + 2 + read-write + + + RTC_CALI_RDY + 15 + 1 + read-only + + + RTC_CALI_MAX + 16 + 15 + read-write + + + RTC_CALI_START + 31 + 1 + read-write + + + + + RTCCALICFG1 + 0x6C + 0x20 + + + RTC_CALI_VALUE + 7 + 25 + read-only + + + + + LACTCONFIG + 0x70 + 0x20 + 0x60002300 + + + LACT_RTC_ONLY + 7 + 1 + read-write + + + LACT_CPST_EN + 8 + 1 + read-write + + + LACT_LAC_EN + 9 + 1 + read-write + + + LACT_ALARM_EN + 10 + 1 + read-write + + + LACT_LEVEL_INT_EN + 11 + 1 + read-write + + + LACT_EDGE_INT_EN + 12 + 1 + read-write + + + LACT_DIVIDER + 13 + 16 + read-write + + + LACT_AUTORELOAD + 29 + 1 + read-write + + + LACT_INCREASE + 30 + 1 + read-write + + + LACT_EN + 31 + 1 + read-write + + + + + LACTRTC + 0x74 + 0x20 + + + LACT_RTC_STEP_LEN + 6 + 26 + read-write + + + + + LACTLO + 0x78 + 0x20 + + + LACT_LO + 0 + 32 + read-only + + + + + LACTHI + 0x7C + 0x20 + + + LACT_HI + 0 + 32 + read-only + + + + + LACTUPDATE + 0x80 + 0x20 + + + LACT_UPDATE + 0 + 32 + write-only + + + + + LACTALARMLO + 0x84 + 0x20 + + + LACT_ALARM_LO + 0 + 32 + read-write + + + + + LACTALARMHI + 0x88 + 0x20 + + + LACT_ALARM_HI + 0 + 32 + read-write + + + + + LACTLOADLO + 0x8C + 0x20 + + + LACT_LOAD_LO + 0 + 32 + read-write + + + + + LACTLOADHI + 0x90 + 0x20 + + + LACT_LOAD_HI + 0 + 32 + read-write + + + + + LACTLOAD + 0x94 + 0x20 + + + LACT_LOAD + 0 + 32 + write-only + + + + + INT_ENA_TIMERS + 0x98 + 0x20 + + + T0_INT_ENA + interrupt when timer0 alarm + 0 + 1 + read-write + + + T1_INT_ENA + interrupt when timer1 alarm + 1 + 1 + read-write + + + WDT_INT_ENA + Interrupt when an interrupt stage timeout + 2 + 1 + read-write + + + LACT_INT_ENA + 3 + 1 + read-write + + + + + INT_RAW_TIMERS + 0x9C + 0x20 + + + T0_INT_RAW + interrupt when timer0 alarm + 0 + 1 + read-only + + + T1_INT_RAW + interrupt when timer1 alarm + 1 + 1 + read-only + + + WDT_INT_RAW + Interrupt when an interrupt stage timeout + 2 + 1 + read-only + + + LACT_INT_RAW + 3 + 1 + read-only + + + + + INT_ST_TIMERS + 0xA0 + 0x20 + + + T0_INT_ST + interrupt when timer0 alarm + 0 + 1 + read-only + + + T1_INT_ST + interrupt when timer1 alarm + 1 + 1 + read-only + + + WDT_INT_ST + Interrupt when an interrupt stage timeout + 2 + 1 + read-only + + + LACT_INT_ST + 3 + 1 + read-only + + + + + INT_CLR_TIMERS + 0xA4 + 0x20 + + + T0_INT_CLR + interrupt when timer0 alarm + 0 + 1 + write-only + + + T1_INT_CLR + interrupt when timer1 alarm + 1 + 1 + write-only + + + WDT_INT_CLR + Interrupt when an interrupt stage timeout + 2 + 1 + write-only + + + LACT_INT_CLR + 3 + 1 + write-only + + + + + NTIMERS_DATE + 0xF8 + 0x20 + 0x01604290 + + + NTIMERS_DATE + Version of this regfile + 0 + 28 + read-write + + + + + TIMGCLK + 0xFC + 0x20 + + + CLK_EN + Force clock enable for this regfile + 31 + 1 + read-write + + + + + + + TIMG1 + Timer Group + 0x3FF60000 + + TG1_T0_LEVEL + 18 + + + TG1_T1_LEVEL + 19 + + + TG1_WDT_LEVEL + 20 + + + TG1_LACT_LEVEL + 21 + + + TG1_T0_EDGE + 62 + + + TG1_T1_EDGE + 63 + + + TG1_WDT_EDGE + 64 + + + TG1_LACT_EDGE + 65 + + + + TWAI + Two-Wire Automotive Interface + TWAI + 0x3FF6B000 + + 0x0 + 0x6C + registers + + + TWAI + 45 + + + + MODE + Mode Register + 0x0 + 0x20 + 0x00000001 + + + RESET_MODE + This bit is used to configure the operating mode of the TWAI Controller. 1: Reset mode; 0: Operating mode. + 0 + 1 + read-write + + + LISTEN_ONLY_MODE + 1: Listen only mode. In this mode the nodes will only receive messages from the bus, without generating the acknowledge signal nor updating the RX error counter. + 1 + 1 + read-write + + + SELF_TEST_MODE + 1: Self test mode. In this mode the TX nodes can perform a successful transmission without receiving the acknowledge signal. This mode is often used to test a single node with the self reception request command. + 2 + 1 + read-write + + + RX_FILTER_MODE + This bit is used to configure the filter mode. 0: Dual filter mode; 1: Single filter mode. + 3 + 1 + read-write + + + + + CMD + Command Register + 0x4 + 0x20 + + + TX_REQ + Set the bit to 1 to allow the driving nodes start transmission. + 0 + 1 + write-only + + + ABORT_TX + Set the bit to 1 to cancel a pending transmission request. + 1 + 1 + write-only + + + RELEASE_BUF + Set the bit to 1 to release the RX buffer. + 2 + 1 + write-only + + + CLR_OVERRUN + Set the bit to 1 to clear the data overrun status bit. + 3 + 1 + write-only + + + SELF_RX_REQ + Self reception request command. Set the bit to 1 to allow a message be transmitted and received simultaneously. + 4 + 1 + write-only + + + + + STATUS + Status register + 0x8 + 0x20 + + + RX_BUF_ST + 1: The data in the RX buffer is not empty, with at least one received data packet. + 0 + 1 + read-only + + + OVERRUN_ST + 1: The RX FIFO is full and data overrun has occurred. + 1 + 1 + read-only + + + TX_BUF_ST + 1: The TX buffer is empty, the CPU may write a message into it. + 2 + 1 + read-only + + + TX_COMPLETE + 1: The TWAI controller has successfully received a packet from the bus. + 3 + 1 + read-only + + + RX_ST + 1: The TWAI Controller is receiving a message from the bus. + 4 + 1 + read-only + + + TX_ST + 1: The TWAI Controller is transmitting a message to the bus. + 5 + 1 + read-only + + + ERR_ST + 1: At least one of the RX/TX error counter has reached or exceeded the value set in register TWAI_ERR_WARNING_LIMIT_REG. + 6 + 1 + read-only + + + BUS_OFF_ST + 1: In bus-off status, the TWAI Controller is no longer involved in bus activities. + 7 + 1 + read-only + + + MISS_ST + This bit reflects whether the data packet in the RX FIFO is complete. 1: The current packet is missing; 0: The current packet is complete + 8 + 1 + read-only + + + + + INT_RAW + Interrupt Register + 0xC + 0x20 + + + RX_INT_ST + Receive interrupt. If this bit is set to 1, it indicates there are messages to be handled in the RX FIFO. + 0 + 1 + read-only + + + TX_INT_ST + Transmit interrupt. If this bit is set to 1, it indicates the message transmitting mis- sion is finished and a new transmission is able to execute. + 1 + 1 + read-only + + + ERR_WARN_INT_ST + Error warning interrupt. If this bit is set to 1, it indicates the error status signal and the bus-off status signal of Status register have changed (e.g., switched from 0 to 1 or from 1 to 0). + 2 + 1 + read-only + + + OVERRUN_INT_ST + Data overrun interrupt. If this bit is set to 1, it indicates a data overrun interrupt is generated in the RX FIFO. + 3 + 1 + read-only + + + ERR_PASSIVE_INT_ST + Error passive interrupt. If this bit is set to 1, it indicates the TWAI Controller is switched between error active status and error passive status due to the change of error counters. + 5 + 1 + read-only + + + ARB_LOST_INT_ST + Arbitration lost interrupt. If this bit is set to 1, it indicates an arbitration lost interrupt is generated. + 6 + 1 + read-only + + + BUS_ERR_INT_ST + Error interrupt. If this bit is set to 1, it indicates an error is detected on the bus. + 7 + 1 + read-only + + + + + INT_ENA + Interrupt Enable Register + 0x10 + 0x20 + + + RX_INT_ENA + Set this bit to 1 to enable receive interrupt. + 0 + 1 + read-write + + + TX_INT_ENA + Set this bit to 1 to enable transmit interrupt. + 1 + 1 + read-write + + + ERR_WARN_INT_ENA + Set this bit to 1 to enable error warning interrupt. + 2 + 1 + read-write + + + OVERRUN_INT_ENA + Set this bit to 1 to enable data overrun interrupt. + 3 + 1 + read-write + + + ERR_PASSIVE_INT_ENA + Set this bit to 1 to enable error passive interrupt. + 5 + 1 + read-write + + + ARB_LOST_INT_ENA + Set this bit to 1 to enable arbitration lost interrupt. + 6 + 1 + read-write + + + BUS_ERR_INT_ENA + Set this bit to 1 to enable error interrupt. + 7 + 1 + read-write + + + + + BUS_TIMING_0 + Bus Timing Register 0 + 0x18 + 0x20 + + + BAUD_PRESC + Baud Rate Prescaler, determines the frequency dividing ratio. + 0 + 14 + + + SYNC_JUMP_WIDTH + Synchronization Jump Width (SJW), 1 \verb+~+ 14 Tq wide. + 14 + 2 + + + + + BUS_TIMING_1 + Bus Timing Register 1 + 0x1C + 0x20 + + + TIME_SEG1 + The width of PBS1. + 0 + 4 + + + TIME_SEG2 + The width of PBS2. + 4 + 3 + + + TIME_SAMP + The number of sample points. 0: the bus is sampled once; 1: the bus is sampled three times + 7 + 1 + + + + + ARB_LOST_CAP + Arbitration Lost Capture Register + 0x2C + 0x20 + + + ARB_LOST_CAP + This register contains information about the bit position of lost arbitration. + 0 + 5 + read-only + + + + + ERR_CODE_CAP + Error Code Capture Register + 0x30 + 0x20 + + + ECC_SEGMENT + This register contains information about the location of errors, see Table 181 for details. + 0 + 5 + read-only + + + ECC_DIRECTION + This register contains information about transmission direction of the node when error occurs. 1: Error occurs when receiving a message; 0: Error occurs when transmitting a message + 5 + 1 + read-only + + + ECC_TYPE + This register contains information about error types: 00: bit error; 01: form error; 10: stuff error; 11: other type of error + 6 + 2 + read-only + + + + + ERR_WARNING_LIMIT + Error Warning Limit Register + 0x34 + 0x20 + 0x00000060 + + + ERR_WARNING_LIMIT + Error warning threshold. In the case when any of a error counter value exceeds the threshold, or all the error counter values are below the threshold, an error warning interrupt will be triggered (given the enable signal is valid). + 0 + 8 + + + + + RX_ERR_CNT + Receive Error Counter Register + 0x38 + 0x20 + + + RX_ERR_CNT + The RX error counter register, reflects value changes under reception status. + 0 + 8 + + + + + TX_ERR_CNT + Transmit Error Counter Register + 0x3C + 0x20 + + + TX_ERR_CNT + The TX error counter register, reflects value changes under transmission status. + 0 + 8 + + + + + DATA_0 + Data register 0 + 0x40 + 0x20 + + + TX_BYTE_0 + In reset mode, it is acceptance code register 0 with R/W Permission. In operation mode, it stores the 0th byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_1 + Data register 1 + 0x44 + 0x20 + + + TX_BYTE_1 + In reset mode, it is acceptance code register 1 with R/W Permission. In operation mode, it stores the 1st byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_2 + Data register 2 + 0x48 + 0x20 + + + TX_BYTE_2 + In reset mode, it is acceptance code register 2 with R/W Permission. In operation mode, it stores the 2nd byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_3 + Data register 3 + 0x4C + 0x20 + + + TX_BYTE_3 + In reset mode, it is acceptance code register 3 with R/W Permission. In operation mode, it stores the 3rd byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_4 + Data register 4 + 0x50 + 0x20 + + + TX_BYTE_4 + In reset mode, it is acceptance mask register 0 with R/W Permission. In operation mode, it stores the 4th byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_5 + Data register 5 + 0x54 + 0x20 + + + TX_BYTE_5 + In reset mode, it is acceptance mask register 1 with R/W Permission. In operation mode, it stores the 5th byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_6 + Data register 6 + 0x58 + 0x20 + + + TX_BYTE_6 + In reset mode, it is acceptance mask register 2 with R/W Permission. In operation mode, it stores the 6th byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_7 + Data register 7 + 0x5C + 0x20 + + + TX_BYTE_7 + In reset mode, it is acceptance mask register 3 with R/W Permission. In operation mode, it stores the 7th byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_8 + Data register 8 + 0x60 + 0x20 + + + TX_BYTE_8 + Stored the 8th byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_9 + Data register 9 + 0x64 + 0x20 + + + TX_BYTE_9 + Stored the 9th byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_10 + Data register 10 + 0x68 + 0x20 + + + TX_BYTE_10 + Stored the 10th byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_11 + Data register 11 + 0x6C + 0x20 + + + TX_BYTE_11 + Stored the 11th byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + DATA_12 + Data register 12 + 0x70 + 0x20 + + + TX_BYTE_12 + Stored the 12th byte information of the data to be transmitted under operating mode. + 0 + 8 + write-only + + + + + RX_MESSAGE_CNT + Receive Message Counter Register + 0x74 + 0x20 + + + RX_MESSAGE_COUNTER + This register reflects the number of messages available within the RX FIFO. + 0 + 7 + read-only + + + + + CLOCK_DIVIDER + Clock Divider register + 0x7C + 0x20 + + + CD + These bits are used to configure frequency dividing coefficients of the external CLKOUT pin. + 0 + 8 + read-write + + + CLOCK_OFF + This bit can be configured under reset mode. 1: Disable the external CLKOUT pin; 0: Enable the external CLKOUT pin + 8 + 1 + + + + + + + UART0 + UART (Universal Asynchronous Receiver-Transmitter) Controller + UART + 0x3FF40000 + + 0x0 + 0x7C + registers + + + UART0 + 34 + + + + FIFO + 0x0 + 0x20 + + + RXFIFO_RD_BYTE + This register stores one byte data read by rx fifo. + 0 + 8 + read-write + + + + + INT_RAW + 0x4 + 0x20 + + + RXFIFO_FULL_INT_RAW + This interrupt raw bit turns to high level when receiver receives more data than (rx_flow_thrhd_h3 rx_flow_thrhd). + 0 + 1 + read-only + + + TXFIFO_EMPTY_INT_RAW + This interrupt raw bit turns to high level when the amount of data in transmitter's fifo is less than ((tx_mem_cnttxfifo_cnt) . + 1 + 1 + read-only + + + PARITY_ERR_INT_RAW + This interrupt raw bit turns to high level when receiver detects the parity error of data. + 2 + 1 + read-only + + + FRM_ERR_INT_RAW + This interrupt raw bit turns to high level when receiver detects data's frame error . + 3 + 1 + read-only + + + RXFIFO_OVF_INT_RAW + This interrupt raw bit turns to high level when receiver receives more data than the fifo can store. + 4 + 1 + read-only + + + DSR_CHG_INT_RAW + This interrupt raw bit turns to high level when receiver detects the edge change of dsrn signal. + 5 + 1 + read-only + + + CTS_CHG_INT_RAW + This interrupt raw bit turns to high level when receiver detects the edge change of ctsn signal. + 6 + 1 + read-only + + + BRK_DET_INT_RAW + This interrupt raw bit turns to high level when receiver detects the 0 after the stop bit. + 7 + 1 + read-only + + + RXFIFO_TOUT_INT_RAW + This interrupt raw bit turns to high level when receiver takes more time than rx_tout_thrhd to receive a byte. + 8 + 1 + read-only + + + SW_XON_INT_RAW + This interrupt raw bit turns to high level when receiver receives xoff char with uart_sw_flow_con_en is set to 1. + 9 + 1 + read-only + + + SW_XOFF_INT_RAW + This interrupt raw bit turns to high level when receiver receives xon char with uart_sw_flow_con_en is set to 1. + 10 + 1 + read-only + + + GLITCH_DET_INT_RAW + This interrupt raw bit turns to high level when receiver detects the start bit. + 11 + 1 + read-only + + + TX_BRK_DONE_INT_RAW + This interrupt raw bit turns to high level when transmitter completes sendding 0 after all the datas in transmitter's fifo are send. + 12 + 1 + read-only + + + TX_BRK_IDLE_DONE_INT_RAW + This interrupt raw bit turns to high level when transmitter has kept the shortest duration after the last data has been send. + 13 + 1 + read-only + + + TX_DONE_INT_RAW + This interrupt raw bit turns to high level when transmitter has send all the data in fifo. + 14 + 1 + read-only + + + RS485_PARITY_ERR_INT_RAW + This interrupt raw bit turns to high level when rs485 detects the parity error. + 15 + 1 + read-only + + + RS485_FRM_ERR_INT_RAW + This interrupt raw bit turns to high level when rs485 detects the data frame error. + 16 + 1 + read-only + + + RS485_CLASH_INT_RAW + This interrupt raw bit turns to high level when rs485 detects the clash between transmitter and receiver. + 17 + 1 + read-only + + + AT_CMD_CHAR_DET_INT_RAW + This interrupt raw bit turns to high level when receiver detects the configured at_cmd chars. + 18 + 1 + read-only + + + + + INT_ST + 0x8 + 0x20 + + + RXFIFO_FULL_INT_ST + This is the status bit for rxfifo_full_int_raw when rxfifo_full_int_ena is set to 1. + 0 + 1 + read-only + + + TXFIFO_EMPTY_INT_ST + This is the status bit for txfifo_empty_int_raw when txfifo_empty_int_ena is set to 1. + 1 + 1 + read-only + + + PARITY_ERR_INT_ST + This is the status bit for parity_err_int_raw when parity_err_int_ena is set to 1. + 2 + 1 + read-only + + + FRM_ERR_INT_ST + This is the status bit for frm_err_int_raw when fm_err_int_ena is set to 1. + 3 + 1 + read-only + + + RXFIFO_OVF_INT_ST + This is the status bit for rxfifo_ovf_int_raw when rxfifo_ovf_int_ena is set to 1. + 4 + 1 + read-only + + + DSR_CHG_INT_ST + This is the status bit for dsr_chg_int_raw when dsr_chg_int_ena is set to 1. + 5 + 1 + read-only + + + CTS_CHG_INT_ST + This is the status bit for cts_chg_int_raw when cts_chg_int_ena is set to 1. + 6 + 1 + read-only + + + BRK_DET_INT_ST + This is the status bit for brk_det_int_raw when brk_det_int_ena is set to 1. + 7 + 1 + read-only + + + RXFIFO_TOUT_INT_ST + This is the status bit for rxfifo_tout_int_raw when rxfifo_tout_int_ena is set to 1. + 8 + 1 + read-only + + + SW_XON_INT_ST + This is the status bit for sw_xon_int_raw when sw_xon_int_ena is set to 1. + 9 + 1 + read-only + + + SW_XOFF_INT_ST + This is the status bit for sw_xoff_int_raw when sw_xoff_int_ena is set to 1. + 10 + 1 + read-only + + + GLITCH_DET_INT_ST + This is the status bit for glitch_det_int_raw when glitch_det_int_ena is set to 1. + 11 + 1 + read-only + + + TX_BRK_DONE_INT_ST + This is the status bit for tx_brk_done_int_raw when tx_brk_done_int_ena is set to 1. + 12 + 1 + read-only + + + TX_BRK_IDLE_DONE_INT_ST + This is the stauts bit for tx_brk_idle_done_int_raw when tx_brk_idle_done_int_ena is set to 1. + 13 + 1 + read-only + + + TX_DONE_INT_ST + This is the status bit for tx_done_int_raw when tx_done_int_ena is set to 1. + 14 + 1 + read-only + + + RS485_PARITY_ERR_INT_ST + This is the status bit for rs485_parity_err_int_raw when rs485_parity_int_ena is set to 1. + 15 + 1 + read-only + + + RS485_FRM_ERR_INT_ST + This is the status bit for rs485_fm_err_int_raw when rs485_fm_err_int_ena is set to 1. + 16 + 1 + read-only + + + RS485_CLASH_INT_ST + This is the status bit for rs485_clash_int_raw when rs485_clash_int_ena is set to 1. + 17 + 1 + read-only + + + AT_CMD_CHAR_DET_INT_ST + This is the status bit for at_cmd_det_int_raw when at_cmd_char_det_int_ena is set to 1. + 18 + 1 + read-only + + + + + INT_ENA + 0xC + 0x20 + + + RXFIFO_FULL_INT_ENA + This is the enable bit for rxfifo_full_int_st register. + 0 + 1 + read-write + + + TXFIFO_EMPTY_INT_ENA + This is the enable bit for rxfifo_full_int_st register. + 1 + 1 + read-write + + + PARITY_ERR_INT_ENA + This is the enable bit for parity_err_int_st register. + 2 + 1 + read-write + + + FRM_ERR_INT_ENA + This is the enable bit for frm_err_int_st register. + 3 + 1 + read-write + + + RXFIFO_OVF_INT_ENA + This is the enable bit for rxfifo_ovf_int_st register. + 4 + 1 + read-write + + + DSR_CHG_INT_ENA + This is the enable bit for dsr_chg_int_st register. + 5 + 1 + read-write + + + CTS_CHG_INT_ENA + This is the enable bit for cts_chg_int_st register. + 6 + 1 + read-write + + + BRK_DET_INT_ENA + This is the enable bit for brk_det_int_st register. + 7 + 1 + read-write + + + RXFIFO_TOUT_INT_ENA + This is the enable bit for rxfifo_tout_int_st register. + 8 + 1 + read-write + + + SW_XON_INT_ENA + This is the enable bit for sw_xon_int_st register. + 9 + 1 + read-write + + + SW_XOFF_INT_ENA + This is the enable bit for sw_xoff_int_st register. + 10 + 1 + read-write + + + GLITCH_DET_INT_ENA + This is the enable bit for glitch_det_int_st register. + 11 + 1 + read-write + + + TX_BRK_DONE_INT_ENA + This is the enable bit for tx_brk_done_int_st register. + 12 + 1 + read-write + + + TX_BRK_IDLE_DONE_INT_ENA + This is the enable bit for tx_brk_idle_done_int_st register. + 13 + 1 + read-write + + + TX_DONE_INT_ENA + This is the enable bit for tx_done_int_st register. + 14 + 1 + read-write + + + RS485_PARITY_ERR_INT_ENA + This is the enable bit for rs485_parity_err_int_st register. + 15 + 1 + read-write + + + RS485_FRM_ERR_INT_ENA + This is the enable bit for rs485_parity_err_int_st register. + 16 + 1 + read-write + + + RS485_CLASH_INT_ENA + This is the enable bit for rs485_clash_int_st register. + 17 + 1 + read-write + + + AT_CMD_CHAR_DET_INT_ENA + This is the enable bit for at_cmd_char_det_int_st register. + 18 + 1 + read-write + + + + + INT_CLR + 0x10 + 0x20 + + + RXFIFO_FULL_INT_CLR + Set this bit to clear the rxfifo_full_int_raw interrupt. + 0 + 1 + write-only + + + TXFIFO_EMPTY_INT_CLR + Set this bit to clear txfifo_empty_int_raw interrupt. + 1 + 1 + write-only + + + PARITY_ERR_INT_CLR + Set this bit to clear parity_err_int_raw interrupt. + 2 + 1 + write-only + + + FRM_ERR_INT_CLR + Set this bit to clear frm_err_int_raw interrupt. + 3 + 1 + write-only + + + RXFIFO_OVF_INT_CLR + Set this bit to clear rxfifo_ovf_int_raw interrupt. + 4 + 1 + write-only + + + DSR_CHG_INT_CLR + Set this bit to clear the dsr_chg_int_raw interrupt. + 5 + 1 + write-only + + + CTS_CHG_INT_CLR + Set this bit to clear the cts_chg_int_raw interrupt. + 6 + 1 + write-only + + + BRK_DET_INT_CLR + Set this bit to clear the brk_det_int_raw interrupt. + 7 + 1 + write-only + + + RXFIFO_TOUT_INT_CLR + Set this bit to clear the rxfifo_tout_int_raw interrupt. + 8 + 1 + write-only + + + SW_XON_INT_CLR + Set this bit to clear the sw_xon_int_raw interrupt. + 9 + 1 + write-only + + + SW_XOFF_INT_CLR + Set this bit to clear the sw_xon_int_raw interrupt. + 10 + 1 + write-only + + + GLITCH_DET_INT_CLR + Set this bit to clear the glitch_det_int_raw interrupt. + 11 + 1 + write-only + + + TX_BRK_DONE_INT_CLR + Set this bit to clear the tx_brk_done_int_raw interrupt.. + 12 + 1 + write-only + + + TX_BRK_IDLE_DONE_INT_CLR + Set this bit to clear the tx_brk_idle_done_int_raw interrupt. + 13 + 1 + write-only + + + TX_DONE_INT_CLR + Set this bit to clear the tx_done_int_raw interrupt. + 14 + 1 + write-only + + + RS485_PARITY_ERR_INT_CLR + Set this bit to clear the rs485_parity_err_int_raw interrupt. + 15 + 1 + write-only + + + RS485_FRM_ERR_INT_CLR + Set this bit to clear the rs485_frm_err_int_raw interrupt. + 16 + 1 + write-only + + + RS485_CLASH_INT_CLR + Set this bit to clear the rs485_clash_int_raw interrupt. + 17 + 1 + write-only + + + AT_CMD_CHAR_DET_INT_CLR + Set this bit to clear the at_cmd_char_det_int_raw interrupt. + 18 + 1 + write-only + + + + + CLKDIV + 0x14 + 0x20 + 0x000002B6 + + + CLKDIV + The register value is the integer part of the frequency divider's factor. + 0 + 20 + read-write + + + FRAG + The register value is the decimal part of the frequency divider's factor. + 20 + 4 + read-write + + + + + AUTOBAUD + 0x18 + 0x20 + 0x00001000 + + + EN + This is the enable bit for detecting baudrate. + 0 + 1 + read-write + + + GLITCH_FILT + when input pulse width is lower then this value igore this pulse.this register is used in autobaud detect process. + 8 + 8 + read-write + + + + + STATUS + 0x1C + 0x20 + + + RXFIFO_CNT + (rx_mem_cnt rxfifo_cnt) stores the byte num of valid datas in receiver's fifo. rx_mem_cnt register stores the 3 most significant bits rxfifo_cnt stores the 8 least significant bits. + 0 + 8 + read-only + + + ST_URX_OUT + This register stores the value of receiver's finite state machine. 0:RX_IDLE 1:RX_STRT 2:RX_DAT0 3:RX_DAT1 4:RX_DAT2 5:RX_DAT3 6:RX_DAT4 7:RX_DAT5 8:RX_DAT6 9:RX_DAT7 10:RX_PRTY 11:RX_STP1 12:RX_STP2 13:RX_DL1 + 8 + 4 + read-only + + + DSRN + This register stores the level value of the internal uart dsr signal. + 13 + 1 + read-only + + + CTSN + This register stores the level value of the internal uart cts signal. + 14 + 1 + read-only + + + RXD + This register stores the level value of the internal uart rxd signal. + 15 + 1 + read-only + + + TXFIFO_CNT + (tx_mem_cnt txfifo_cnt) stores the byte num of valid datas in transmitter's fifo.tx_mem_cnt stores the 3 most significant bits txfifo_cnt stores the 8 least significant bits. + 16 + 8 + read-only + + + ST_UTX_OUT + This register stores the value of transmitter's finite state machine. 0:TX_IDLE 1:TX_STRT 2:TX_DAT0 3:TX_DAT1 4:TX_DAT2 5:TX_DAT3 6:TX_DAT4 7:TX_DAT5 8:TX_DAT6 9:TX_DAT7 10:TX_PRTY 11:TX_STP1 12:TX_STP2 13:TX_DL0 14:TX_DL1 + 24 + 4 + read-only + + + DTRN + The register represent the level value of the internal uart dsr signal. + 29 + 1 + read-only + + + RTSN + This register represent the level value of the internal uart cts signal. + 30 + 1 + read-only + + + TXD + This register represent the level value of the internal uart rxd signal. + 31 + 1 + read-only + + + + + CONF0 + 0x20 + 0x20 + 0x0800001C + + + PARITY + This register is used to configure the parity check mode. 0:even 1:odd + 0 + 1 + read-write + + + PARITY_EN + Set this bit to enable uart parity check. + 1 + 1 + read-write + + + BIT_NUM + This registe is used to set the length of data: 0:5bits 1:6bits 2:7bits 3:8bits + 2 + 2 + read-write + + + STOP_BIT_NUM + This register is used to set the length of stop bit. 1:1bit 2:1.5bits 3:2bits + 4 + 2 + read-write + + + SW_RTS + This register is used to configure the software rts signal which is used in software flow control. + 6 + 1 + read-write + + + SW_DTR + This register is used to configure the software dtr signal which is used in software flow control.. + 7 + 1 + read-write + + + TXD_BRK + Set this bit to enbale transmitter to send 0 when the process of sending data is done. + 8 + 1 + read-write + + + IRDA_DPLX + Set this bit to enable irda loopback mode. + 9 + 1 + read-write + + + IRDA_TX_EN + This is the start enable bit for irda transmitter. + 10 + 1 + read-write + + + IRDA_WCTL + 1.the irda transmitter's 11th bit is the same to the 10th bit. 0.set irda transmitter's 11th bit to 0. + 11 + 1 + read-write + + + IRDA_TX_INV + Set this bit to inverse the level value of irda transmitter's level. + 12 + 1 + read-write + + + IRDA_RX_INV + Set this bit to inverse the level value of irda receiver's level. + 13 + 1 + read-write + + + LOOPBACK + Set this bit to enable uart loopback test mode. + 14 + 1 + read-write + + + TX_FLOW_EN + Set this bit to enable transmitter's flow control function. + 15 + 1 + read-write + + + IRDA_EN + Set this bit to enable irda protocol. + 16 + 1 + read-write + + + RXFIFO_RST + Set this bit to reset uart receiver's fifo. + 17 + 1 + read-write + + + TXFIFO_RST + Set this bit to reset uart transmitter's fifo. + 18 + 1 + read-write + + + RXD_INV + Set this bit to inverse the level value of uart rxd signal. + 19 + 1 + read-write + + + CTS_INV + Set this bit to inverse the level value of uart cts signal. + 20 + 1 + read-write + + + DSR_INV + Set this bit to inverse the level value of uart dsr signal. + 21 + 1 + read-write + + + TXD_INV + Set this bit to inverse the level value of uart txd signal. + 22 + 1 + read-write + + + RTS_INV + Set this bit to inverse the level value of uart rts signal. + 23 + 1 + read-write + + + DTR_INV + Set this bit to inverse the level value of uart dtr signal. + 24 + 1 + read-write + + + CLK_EN + 1.force clock on for registers.support clock only when write registers + 25 + 1 + read-write + + + ERR_WR_MASK + 1.receiver stops storing data int fifo when data is wrong. 0.receiver stores the data even if the received data is wrong. + 26 + 1 + read-write + + + TICK_REF_ALWAYS_ON + This register is used to select the clock.1.apb clock 0:ref_tick + 27 + 1 + read-write + + + + + CONF1 + 0x24 + 0x20 + 0x00006060 + + + RXFIFO_FULL_THRHD + When receiver receives more data than its threshold value.receiver will produce rxfifo_full_int_raw interrupt.the threshold value is (rx_flow_thrhd_h3 rxfifo_full_thrhd). + 0 + 7 + read-write + + + TXFIFO_EMPTY_THRHD + when the data amount in transmitter fifo is less than its threshold value. it will produce txfifo_empty_int_raw interrupt. the threshold value is (tx_mem_empty_thrhd txfifo_empty_thrhd) + 8 + 7 + read-write + + + RX_FLOW_THRHD + when receiver receives more data than its threshold value. receiver produce signal to tell the transmitter stop transferring data. the threshold value is (rx_flow_thrhd_h3 rx_flow_thrhd). + 16 + 7 + read-write + + + RX_FLOW_EN + This is the flow enable bit for uart receiver. 1:choose software flow control with configuring sw_rts signal + 23 + 1 + read-write + + + RX_TOUT_THRHD + This register is used to configure the timeout value for uart receiver receiving a byte. + 24 + 7 + read-write + + + RX_TOUT_EN + This is the enble bit for uart receiver's timeout function. + 31 + 1 + read-write + + + + + LOWPULSE + 0x28 + 0x20 + 0x000FFFFF + + + MIN_CNT + This register stores the value of the minimum duration time for the low level pulse. it is used in baudrate-detect process. + 0 + 20 + read-only + + + + + HIGHPULSE + 0x2C + 0x20 + 0x000FFFFF + + + MIN_CNT + This register stores the value of the maxinum duration time for the high level pulse. it is used in baudrate-detect process. + 0 + 20 + read-only + + + + + RXD_CNT + 0x30 + 0x20 + + + RXD_EDGE_CNT + This register stores the count of rxd edge change. it is used in baudrate-detect process. + 0 + 10 + read-only + + + + + FLOW_CONF + 0x34 + 0x20 + + + SW_FLOW_CON_EN + Set this bit to enable software flow control. it is used with register sw_xon or sw_xoff . + 0 + 1 + read-write + + + XONOFF_DEL + Set this bit to remove flow control char from the received data. + 1 + 1 + read-write + + + FORCE_XON + Set this bit to clear ctsn to stop the transmitter from sending data. + 2 + 1 + read-write + + + FORCE_XOFF + Set this bit to set ctsn to enable the transmitter to go on sending data. + 3 + 1 + read-write + + + SEND_XON + Set this bit to send xon char. it is cleared by hardware automatically. + 4 + 1 + read-write + + + SEND_XOFF + Set this bit to send xoff char. it is cleared by hardware automatically. + 5 + 1 + read-write + + + + + SLEEP_CONF + 0x38 + 0x20 + 0x000000F0 + + + ACTIVE_THRESHOLD + When the input rxd edge changes more than this register value. the uart is active from light sleeping mode. + 0 + 10 + read-write + + + + + SWFC_CONF + 0x3C + 0x20 + 0x1311E000 + + + XON_THRESHOLD + when the data amount in receiver's fifo is more than this register value. it will send a xoff char with uart_sw_flow_con_en set to 1. + 0 + 8 + read-write + + + XOFF_THRESHOLD + When the data amount in receiver's fifo is less than this register value. it will send a xon char with uart_sw_flow_con_en set to 1. + 8 + 8 + read-write + + + XON_CHAR + This register stores the xon flow control char. + 16 + 8 + read-write + + + XOFF_CHAR + This register stores the xoff flow control char. + 24 + 8 + read-write + + + + + IDLE_CONF + 0x40 + 0x20 + 0x00A40100 + + + RX_IDLE_THRHD + when receiver takes more time than this register value to receive a byte data. it will produce frame end signal for uhci to stop receiving data. + 0 + 10 + read-write + + + TX_IDLE_NUM + This register is used to configure the duration time between transfers. + 10 + 10 + read-write + + + TX_BRK_NUM + This register is used to configure the num of 0 send after the process of sending data is done. it is active when txd_brk is set to 1. + 20 + 8 + read-write + + + + + RS485_CONF + 0x44 + 0x20 + + + RS485_EN + Set this bit to choose rs485 mode. + 0 + 1 + read-write + + + DL0_EN + Set this bit to delay the stop bit by 1 bit. + 1 + 1 + read-write + + + DL1_EN + Set this bit to delay the stop bit by 1 bit. + 2 + 1 + read-write + + + RS485TX_RX_EN + Set this bit to enable loopback transmitter's output data signal to receiver's input data signal. + 3 + 1 + read-write + + + RS485RXBY_TX_EN + 1: enable rs485's transmitter to send data when rs485's receiver is busy. 0:rs485's transmitter should not send data when its receiver is busy. + 4 + 1 + read-write + + + RS485_RX_DLY_NUM + This register is used to delay the receiver's internal data signal. + 5 + 1 + read-write + + + RS485_TX_DLY_NUM + This register is used to delay the transmitter's internal data signal. + 6 + 4 + read-write + + + + + AT_CMD_PRECNT + 0x48 + 0x20 + 0x00186A00 + + + PRE_IDLE_NUM + This register is used to configure the idle duration time before the first at_cmd is received by receiver. when the the duration is less than this register value it will not take the next data received as at_cmd char. + 0 + 24 + read-write + + + + + AT_CMD_POSTCNT + 0x4C + 0x20 + 0x00186A00 + + + POST_IDLE_NUM + This register is used to configure the duration time between the last at_cmd and the next data. when the duration is less than this register value it will not take the previous data as at_cmd char. + 0 + 24 + read-write + + + + + AT_CMD_GAPTOUT + 0x50 + 0x20 + 0x00001E00 + + + RX_GAP_TOUT + This register is used to configure the duration time between the at_cmd chars. when the duration time is less than this register value it will not take the datas as continous at_cmd chars. + 0 + 24 + read-write + + + + + AT_CMD_CHAR + 0x54 + 0x20 + 0x0000032B + + + AT_CMD_CHAR + This register is used to configure the content of at_cmd char. + 0 + 8 + read-write + + + CHAR_NUM + This register is used to configure the num of continous at_cmd chars received by receiver. + 8 + 8 + read-write + + + + + MEM_CONF + 0x58 + 0x20 + 0x00000088 + + + MEM_PD + Set this bit to power down mem.when reg_mem_pd registers in the 3 uarts are all set to 1 mem will enter low power mode. + 0 + 1 + read-write + + + RX_SIZE + This register is used to configure the amount of mem allocated to receiver's fifo. the default byte num is 128. + 3 + 4 + read-write + + + TX_SIZE + This register is used to configure the amount of mem allocated to transmitter's fifo.the default byte num is 128. + 7 + 4 + read-write + + + RX_FLOW_THRHD_H3 + refer to the rx_flow_thrhd's describtion. + 15 + 3 + read-write + + + RX_TOUT_THRHD_H3 + refer to the rx_tout_thrhd's describtion. + 18 + 3 + read-write + + + XON_THRESHOLD_H2 + refer to the uart_xon_threshold's describtion. + 21 + 2 + read-write + + + XOFF_THRESHOLD_H2 + refer to the uart_xoff_threshold's describtion. + 23 + 2 + read-write + + + RX_MEM_FULL_THRHD + refer to the rxfifo_full_thrhd's describtion. + 25 + 3 + read-write + + + TX_MEM_EMPTY_THRHD + refer to txfifo_empty_thrhd 's describtion. + 28 + 3 + read-write + + + + + MEM_TX_STATUS + 0x5C + 0x20 + + + MEM_TX_STATUS + 0 + 24 + read-only + + + + + MEM_RX_STATUS + 0x60 + 0x20 + + + MEM_RX_STATUS + This register stores the current uart rx mem read address and rx mem write address + 0 + 24 + read-only + + + MEM_RX_RD_ADDR + This register stores the rx mem read address + 2 + 11 + read-only + + + MEM_RX_WR_ADDR + This register stores the rx mem write address + 13 + 11 + read-only + + + + + MEM_CNT_STATUS + 0x64 + 0x20 + + + RX_MEM_CNT + refer to the rxfifo_cnt's describtion. + 0 + 3 + read-only + + + TX_MEM_CNT + refer to the txfifo_cnt's describtion. + 3 + 3 + read-only + + + + + POSPULSE + 0x68 + 0x20 + 0x000FFFFF + + + POSEDGE_MIN_CNT + This register stores the count of rxd posedge edge. it is used in boudrate-detect process. + 0 + 20 + read-only + + + + + NEGPULSE + 0x6C + 0x20 + 0x000FFFFF + + + NEGEDGE_MIN_CNT + This register stores the count of rxd negedge edge. it is used in boudrate-detect process. + 0 + 20 + read-only + + + + + DATE + 0x78 + 0x20 + 0x15122500 + + + DATE + 0 + 32 + read-write + + + + + ID + 0x7C + 0x20 + 0x00000500 + + + ID + 0 + 32 + read-write + + + + + + + UART1 + UART (Universal Asynchronous Receiver-Transmitter) Controller + 0x3FF50000 + + UART1 + 35 + + + + UART2 + UART (Universal Asynchronous Receiver-Transmitter) Controller + 0x3FF6E000 + + UART2 + 36 + + + + UHCI0 + Universal Host Controller Interface + UHCI + 0x3FF54000 + + 0x0 + 0xC8 + registers + + + UHCI0 + 12 + + + + CONF0 + 0x0 + 0x20 + 0x00370100 + + + IN_RST + Set this bit to reset in link operations. + 0 + 1 + read-write + + + OUT_RST + Set this bit to reset out link operations. + 1 + 1 + read-write + + + AHBM_FIFO_RST + Set this bit to reset dma ahb fifo. + 2 + 1 + read-write + + + AHBM_RST + Set this bit to reset dma ahb interface. + 3 + 1 + read-write + + + IN_LOOP_TEST + Set this bit to enable loop test for in links. + 4 + 1 + read-write + + + OUT_LOOP_TEST + Set this bit to enable loop test for out links. + 5 + 1 + read-write + + + OUT_AUTO_WRBACK + when in link's length is 0 go on to use the next in link automatically. + 6 + 1 + read-write + + + OUT_NO_RESTART_CLR + don't use + 7 + 1 + read-write + + + OUT_EOF_MODE + Set this bit to produce eof after DMA pops all data clear this bit to produce eof after DMA pushes all data + 8 + 1 + read-write + + + UART0_CE + Set this bit to use UART to transmit or receive data. + 9 + 1 + read-write + + + UART1_CE + Set this bit to use UART1 to transmit or receive data. + 10 + 1 + read-write + + + UART2_CE + Set this bit to use UART2 to transmit or receive data. + 11 + 1 + read-write + + + OUTDSCR_BURST_EN + Set this bit to enable DMA in links to use burst mode. + 12 + 1 + read-write + + + INDSCR_BURST_EN + Set this bit to enable DMA out links to use burst mode. + 13 + 1 + read-write + + + OUT_DATA_BURST_EN + Set this bit to enable DMA burst MODE + 14 + 1 + read-write + + + MEM_TRANS_EN + 15 + 1 + read-write + + + SEPER_EN + Set this bit to use special char to separate the data frame. + 16 + 1 + read-write + + + HEAD_EN + Set this bit to enable to use head packet before the data frame. + 17 + 1 + read-write + + + CRC_REC_EN + Set this bit to enable receiver''s ability of crc calculation when crc_en bit in head packet is 1 then there will be crc bytes after data_frame + 18 + 1 + read-write + + + UART_IDLE_EOF_EN + Set this bit to enable to use idle time when the idle time after data frame is satisfied this means the end of a data frame. + 19 + 1 + read-write + + + LEN_EOF_EN + Set this bit to enable to use packet_len in packet head when the received data is equal to packet_len this means the end of a data frame. + 20 + 1 + read-write + + + ENCODE_CRC_EN + Set this bit to enable crc calculation for data frame when bit6 in the head packet is 1. + 21 + 1 + read-write + + + CLK_EN + Set this bit to enable clock-gating for read or write registers. + 22 + 1 + read-write + + + UART_RX_BRK_EOF_EN + Set this bit to enable to use brk char as the end of a data frame. + 23 + 1 + read-write + + + + + INT_RAW + 0x4 + 0x20 + + + RX_START_INT_RAW + when a separator char has been send it will produce uhci_rx_start_int interrupt. + 0 + 1 + read-only + + + TX_START_INT_RAW + when DMA detects a separator char it will produce uhci_tx_start_int interrupt. + 1 + 1 + read-only + + + RX_HUNG_INT_RAW + when DMA takes a lot of time to receive a data it will produce uhci_rx_hung_int interrupt. + 2 + 1 + read-only + + + TX_HUNG_INT_RAW + when DMA takes a lot of time to read a data from RAM it will produce uhci_tx_hung_int interrupt. + 3 + 1 + read-only + + + IN_DONE_INT_RAW + when a in link descriptor has been completed it will produce uhci_in_done_int interrupt. + 4 + 1 + read-only + + + IN_SUC_EOF_INT_RAW + when a data packet has been received it will produce uhci_in_suc_eof_int interrupt. + 5 + 1 + read-only + + + IN_ERR_EOF_INT_RAW + when there are some errors about eof in in link descriptor it will produce uhci_in_err_eof_int interrupt. + 6 + 1 + read-only + + + OUT_DONE_INT_RAW + when a out link descriptor is completed it will produce uhci_out_done_int interrupt. + 7 + 1 + read-only + + + OUT_EOF_INT_RAW + when the current descriptor's eof bit is 1 it will produce uhci_out_eof_int interrupt. + 8 + 1 + read-only + + + IN_DSCR_ERR_INT_RAW + when there are some errors about the out link descriptor it will produce uhci_in_dscr_err_int interrupt. + 9 + 1 + read-only + + + OUT_DSCR_ERR_INT_RAW + when there are some errors about the in link descriptor it will produce uhci_out_dscr_err_int interrupt. + 10 + 1 + read-only + + + IN_DSCR_EMPTY_INT_RAW + when there are not enough in links for DMA it will produce uhci_in_dscr_err_int interrupt. + 11 + 1 + read-only + + + OUTLINK_EOF_ERR_INT_RAW + when there are some errors about eof in outlink descriptor it will produce uhci_outlink_eof_err_int interrupt. + 12 + 1 + read-only + + + OUT_TOTAL_EOF_INT_RAW + When all data have been send it will produce uhci_out_total_eof_int interrupt. + 13 + 1 + read-only + + + SEND_S_Q_INT_RAW + When use single send registers to send a short packets it will produce this interrupt when dma has send the short packet. + 14 + 1 + read-only + + + SEND_A_Q_INT_RAW + When use always_send registers to send a series of short packets it will produce this interrupt when dma has send the short packet. + 15 + 1 + read-only + + + DMA_INFIFO_FULL_WM_INT_RAW + 16 + 1 + read-only + + + + + INT_ST + 0x8 + 0x20 + + + RX_START_INT_ST + 0 + 1 + read-only + + + TX_START_INT_ST + 1 + 1 + read-only + + + RX_HUNG_INT_ST + 2 + 1 + read-only + + + TX_HUNG_INT_ST + 3 + 1 + read-only + + + IN_DONE_INT_ST + 4 + 1 + read-only + + + IN_SUC_EOF_INT_ST + 5 + 1 + read-only + + + IN_ERR_EOF_INT_ST + 6 + 1 + read-only + + + OUT_DONE_INT_ST + 7 + 1 + read-only + + + OUT_EOF_INT_ST + 8 + 1 + read-only + + + IN_DSCR_ERR_INT_ST + 9 + 1 + read-only + + + OUT_DSCR_ERR_INT_ST + 10 + 1 + read-only + + + IN_DSCR_EMPTY_INT_ST + 11 + 1 + read-only + + + OUTLINK_EOF_ERR_INT_ST + 12 + 1 + read-only + + + OUT_TOTAL_EOF_INT_ST + 13 + 1 + read-only + + + SEND_S_Q_INT_ST + 14 + 1 + read-only + + + SEND_A_Q_INT_ST + 15 + 1 + read-only + + + DMA_INFIFO_FULL_WM_INT_ST + 16 + 1 + read-only + + + + + INT_ENA + 0xC + 0x20 + + + RX_START_INT_ENA + 0 + 1 + read-write + + + TX_START_INT_ENA + 1 + 1 + read-write + + + RX_HUNG_INT_ENA + 2 + 1 + read-write + + + TX_HUNG_INT_ENA + 3 + 1 + read-write + + + IN_DONE_INT_ENA + 4 + 1 + read-write + + + IN_SUC_EOF_INT_ENA + 5 + 1 + read-write + + + IN_ERR_EOF_INT_ENA + 6 + 1 + read-write + + + OUT_DONE_INT_ENA + 7 + 1 + read-write + + + OUT_EOF_INT_ENA + 8 + 1 + read-write + + + IN_DSCR_ERR_INT_ENA + 9 + 1 + read-write + + + OUT_DSCR_ERR_INT_ENA + 10 + 1 + read-write + + + IN_DSCR_EMPTY_INT_ENA + 11 + 1 + read-write + + + OUTLINK_EOF_ERR_INT_ENA + 12 + 1 + read-write + + + OUT_TOTAL_EOF_INT_ENA + 13 + 1 + read-write + + + SEND_S_Q_INT_ENA + 14 + 1 + read-write + + + SEND_A_Q_INT_ENA + 15 + 1 + read-write + + + DMA_INFIFO_FULL_WM_INT_ENA + 16 + 1 + read-write + + + + + INT_CLR + 0x10 + 0x20 + + + RX_START_INT_CLR + 0 + 1 + write-only + + + TX_START_INT_CLR + 1 + 1 + write-only + + + RX_HUNG_INT_CLR + 2 + 1 + write-only + + + TX_HUNG_INT_CLR + 3 + 1 + write-only + + + IN_DONE_INT_CLR + 4 + 1 + write-only + + + IN_SUC_EOF_INT_CLR + 5 + 1 + write-only + + + IN_ERR_EOF_INT_CLR + 6 + 1 + write-only + + + OUT_DONE_INT_CLR + 7 + 1 + write-only + + + OUT_EOF_INT_CLR + 8 + 1 + write-only + + + IN_DSCR_ERR_INT_CLR + 9 + 1 + write-only + + + OUT_DSCR_ERR_INT_CLR + 10 + 1 + write-only + + + IN_DSCR_EMPTY_INT_CLR + 11 + 1 + write-only + + + OUTLINK_EOF_ERR_INT_CLR + 12 + 1 + write-only + + + OUT_TOTAL_EOF_INT_CLR + 13 + 1 + write-only + + + SEND_S_Q_INT_CLR + 14 + 1 + write-only + + + SEND_A_Q_INT_CLR + 15 + 1 + write-only + + + DMA_INFIFO_FULL_WM_INT_CLR + 16 + 1 + write-only + + + + + DMA_OUT_STATUS + 0x14 + 0x20 + 0x00000002 + + + OUT_FULL + 1:DMA out link descriptor's fifo is full. + 0 + 1 + read-only + + + OUT_EMPTY + 1:DMA in link descriptor's fifo is empty. + 1 + 1 + read-only + + + + + DMA_OUT_PUSH + 0x18 + 0x20 + + + OUTFIFO_WDATA + This is the data need to be pushed into out link descriptor's fifo. + 0 + 9 + read-write + + + OUTFIFO_PUSH + Set this bit to push data in out link descriptor's fifo. + 16 + 1 + read-write + + + + + DMA_IN_STATUS + 0x1C + 0x20 + 0x00000002 + + + IN_FULL + 0 + 1 + read-only + + + IN_EMPTY + 1 + 1 + read-only + + + RX_ERR_CAUSE + This register stores the errors caused in out link descriptor's data packet. + 4 + 3 + read-only + + + + + DMA_IN_POP + 0x20 + 0x20 + + + INFIFO_RDATA + This register stores the data pop from in link descriptor's fifo. + 0 + 12 + read-only + + + INFIFO_POP + Set this bit to pop data in in link descriptor's fifo. + 16 + 1 + read-write + + + + + DMA_OUT_LINK + 0x24 + 0x20 + + + OUTLINK_ADDR + This register stores the least 20 bits of the first out link descriptor's address. + 0 + 20 + read-write + + + OUTLINK_STOP + Set this bit to stop dealing with the out link descriptors. + 28 + 1 + read-write + + + OUTLINK_START + Set this bit to start dealing with the out link descriptors. + 29 + 1 + read-write + + + OUTLINK_RESTART + Set this bit to mount on new out link descriptors + 30 + 1 + read-write + + + OUTLINK_PARK + 1£º the out link descriptor's fsm is in idle state. 0:the out link descriptor's fsm is working. + 31 + 1 + read-only + + + + + DMA_IN_LINK + 0x28 + 0x20 + 0x00100000 + + + INLINK_ADDR + This register stores the least 20 bits of the first in link descriptor's address. + 0 + 20 + read-write + + + INLINK_AUTO_RET + 1:when a packet is wrong in link descriptor returns to the descriptor which is lately used. + 20 + 1 + read-write + + + INLINK_STOP + Set this bit to stop dealing with the in link descriptors. + 28 + 1 + read-write + + + INLINK_START + Set this bit to start dealing with the in link descriptors. + 29 + 1 + read-write + + + INLINK_RESTART + Set this bit to mount on new in link descriptors + 30 + 1 + read-write + + + INLINK_PARK + 1:the in link descriptor's fsm is in idle state. 0:the in link descriptor's fsm is working + 31 + 1 + read-only + + + + + CONF1 + 0x2C + 0x20 + 0x00000033 + + + CHECK_SUM_EN + Set this bit to enable decoder to check check_sum in packet header. + 0 + 1 + read-write + + + CHECK_SEQ_EN + Set this bit to enable decoder to check seq num in packet header. + 1 + 1 + read-write + + + CRC_DISABLE + Set this bit to disable crc calculation. + 2 + 1 + read-write + + + SAVE_HEAD + Set this bit to save packet header . + 3 + 1 + read-write + + + TX_CHECK_SUM_RE + Set this bit to enable hardware replace check_sum in packet header automatically. + 4 + 1 + read-write + + + TX_ACK_NUM_RE + Set this bit to enable hardware replace ack num in packet header automatically. + 5 + 1 + read-write + + + CHECK_OWNER + Set this bit to check the owner bit in link descriptor. + 6 + 1 + read-write + + + WAIT_SW_START + Set this bit to enable software way to add packet header. + 7 + 1 + read-write + + + SW_START + Set this bit to start inserting the packet header. + 8 + 1 + read-write + + + DMA_INFIFO_FULL_THRS + when data amount in link descriptor's fifo is more than this register value it will produce uhci_dma_infifo_full_wm_int interrupt. + 9 + 12 + read-write + + + + + STATE0 + 0x30 + 0x20 + + + STATE0 + 0 + 32 + read-only + + + + + STATE1 + 0x34 + 0x20 + + + STATE1 + 0 + 32 + read-only + + + + + DMA_OUT_EOF_DES_ADDR + 0x38 + 0x20 + + + OUT_EOF_DES_ADDR + This register stores the address of out link descriptoir when eof bit in this descriptor is 1. + 0 + 32 + read-only + + + + + DMA_IN_SUC_EOF_DES_ADDR + 0x3C + 0x20 + + + IN_SUC_EOF_DES_ADDR + This register stores the address of in link descriptor when eof bit in this descriptor is 1. + 0 + 32 + read-only + + + + + DMA_IN_ERR_EOF_DES_ADDR + 0x40 + 0x20 + + + IN_ERR_EOF_DES_ADDR + This register stores the address of in link descriptor when there are some errors in this descriptor. + 0 + 32 + read-only + + + + + DMA_OUT_EOF_BFR_DES_ADDR + 0x44 + 0x20 + + + OUT_EOF_BFR_DES_ADDR + This register stores the address of out link descriptor when there are some errors in this descriptor. + 0 + 32 + read-only + + + + + AHB_TEST + 0x48 + 0x20 + + + AHB_TESTMODE + bit2 is ahb bus test enable ,bit1 is used to choose wrtie(1) or read(0) mode. bit0 is used to choose test only once(1) or continue(0) + 0 + 3 + read-write + + + AHB_TESTADDR + The two bits represent ahb bus address bit[20:19] + 4 + 2 + read-write + + + + + DMA_IN_DSCR + 0x4C + 0x20 + + + INLINK_DSCR + The content of current in link descriptor's third dword + 0 + 32 + read-only + + + + + DMA_IN_DSCR_BF0 + 0x50 + 0x20 + + + INLINK_DSCR_BF0 + The content of current in link descriptor's first dword + 0 + 32 + read-only + + + + + DMA_IN_DSCR_BF1 + 0x54 + 0x20 + + + INLINK_DSCR_BF1 + The content of current in link descriptor's second dword + 0 + 32 + read-only + + + + + DMA_OUT_DSCR + 0x58 + 0x20 + + + OUTLINK_DSCR + The content of current out link descriptor's third dword + 0 + 32 + read-only + + + + + DMA_OUT_DSCR_BF0 + 0x5C + 0x20 + + + OUTLINK_DSCR_BF0 + The content of current out link descriptor's first dword + 0 + 32 + read-only + + + + + DMA_OUT_DSCR_BF1 + 0x60 + 0x20 + + + OUTLINK_DSCR_BF1 + The content of current out link descriptor's second dword + 0 + 32 + read-only + + + + + ESCAPE_CONF + 0x64 + 0x20 + 0x00000033 + + + TX_C0_ESC_EN + Set this bit to enable 0xc0 char decode when DMA receives data. + 0 + 1 + read-write + + + TX_DB_ESC_EN + Set this bit to enable 0xdb char decode when DMA receives data. + 1 + 1 + read-write + + + TX_11_ESC_EN + Set this bit to enable flow control char 0x11 decode when DMA receives data. + 2 + 1 + read-write + + + TX_13_ESC_EN + Set this bit to enable flow control char 0x13 decode when DMA receives data. + 3 + 1 + read-write + + + RX_C0_ESC_EN + Set this bit to enable 0xc0 char replace when DMA sends data. + 4 + 1 + read-write + + + RX_DB_ESC_EN + Set this bit to enable 0xdb char replace when DMA sends data. + 5 + 1 + read-write + + + RX_11_ESC_EN + Set this bit to enable flow control char 0x11 replace when DMA sends data. + 6 + 1 + read-write + + + RX_13_ESC_EN + Set this bit to enable flow control char 0x13 replace when DMA sends data. + 7 + 1 + read-write + + + + + HUNG_CONF + 0x68 + 0x20 + 0x00810810 + + + TXFIFO_TIMEOUT + This register stores the timeout value.when DMA takes more time than this register value to receive a data it will produce uhci_tx_hung_int interrupt. + 0 + 8 + read-write + + + TXFIFO_TIMEOUT_SHIFT + The tick count is cleared when its value >=(17'd8000>>reg_txfifo_timeout_shift) + 8 + 3 + read-write + + + TXFIFO_TIMEOUT_ENA + The enable bit for txfifo receive data timeout + 11 + 1 + read-write + + + RXFIFO_TIMEOUT + This register stores the timeout value.when DMA takes more time than this register value to read a data from RAM it will produce uhci_rx_hung_int interrupt. + 12 + 8 + read-write + + + RXFIFO_TIMEOUT_SHIFT + The tick count is cleared when its value >=(17'd8000>>reg_rxfifo_timeout_shift) + 20 + 3 + read-write + + + RXFIFO_TIMEOUT_ENA + This is the enable bit for DMA send data timeout + 23 + 1 + read-write + + + + + ACK_NUM + 0x6C + 0x20 + + + RX_HEAD + 0x70 + 0x20 + + + RX_HEAD + This register stores the packet header received by DMA + 0 + 32 + read-only + + + + + QUICK_SENT + 0x74 + 0x20 + + + SINGLE_SEND_NUM + The bits are used to choose which short packet + 0 + 3 + read-write + + + SINGLE_SEND_EN + Set this bit to enable send a short packet + 3 + 1 + read-write + + + ALWAYS_SEND_NUM + The bits are used to choose which short packet + 4 + 3 + read-write + + + ALWAYS_SEND_EN + Set this bit to enable continuously send the same short packet + 7 + 1 + read-write + + + + + Q0_WORD0 + 0x78 + 0x20 + + + SEND_Q0_WORD0 + This register stores the content of short packet's first dword + 0 + 32 + read-write + + + + + Q0_WORD1 + 0x7C + 0x20 + + + SEND_Q0_WORD1 + This register stores the content of short packet's second dword + 0 + 32 + read-write + + + + + Q1_WORD0 + 0x80 + 0x20 + + + SEND_Q1_WORD0 + This register stores the content of short packet's first dword + 0 + 32 + read-write + + + + + Q1_WORD1 + 0x84 + 0x20 + + + SEND_Q1_WORD1 + This register stores the content of short packet's second dword + 0 + 32 + read-write + + + + + Q2_WORD0 + 0x88 + 0x20 + + + SEND_Q2_WORD0 + This register stores the content of short packet's first dword + 0 + 32 + read-write + + + + + Q2_WORD1 + 0x8C + 0x20 + + + SEND_Q2_WORD1 + This register stores the content of short packet's second dword + 0 + 32 + read-write + + + + + Q3_WORD0 + 0x90 + 0x20 + + + SEND_Q3_WORD0 + This register stores the content of short packet's first dword + 0 + 32 + read-write + + + + + Q3_WORD1 + 0x94 + 0x20 + + + SEND_Q3_WORD1 + This register stores the content of short packet's second dword + 0 + 32 + read-write + + + + + Q4_WORD0 + 0x98 + 0x20 + + + SEND_Q4_WORD0 + This register stores the content of short packet's first dword + 0 + 32 + read-write + + + + + Q4_WORD1 + 0x9C + 0x20 + + + SEND_Q4_WORD1 + This register stores the content of short packet's second dword + 0 + 32 + read-write + + + + + Q5_WORD0 + 0xA0 + 0x20 + + + SEND_Q5_WORD0 + This register stores the content of short packet's first dword + 0 + 32 + read-write + + + + + Q5_WORD1 + 0xA4 + 0x20 + + + SEND_Q5_WORD1 + This register stores the content of short packet's second dword + 0 + 32 + read-write + + + + + Q6_WORD0 + 0xA8 + 0x20 + + + SEND_Q6_WORD0 + This register stores the content of short packet's first dword + 0 + 32 + read-write + + + + + Q6_WORD1 + 0xAC + 0x20 + + + SEND_Q6_WORD1 + This register stores the content of short packet's second dword + 0 + 32 + read-write + + + + + ESC_CONF0 + 0xB0 + 0x20 + 0x00DCDBC0 + + + SEPER_CHAR + This register stores the seperator char seperator char is used to seperate the data frame. + 0 + 8 + read-write + + + SEPER_ESC_CHAR0 + This register stores thee first char used to replace seperator char in data. + 8 + 8 + read-write + + + SEPER_ESC_CHAR1 + This register stores the second char used to replace seperator char in data . 0xdc 0xdb replace 0xc0 by default. + 16 + 8 + read-write + + + + + ESC_CONF1 + 0xB4 + 0x20 + 0x00DDDBDB + + + ESC_SEQ0 + This register stores the first substitute char used to replace the seperator char. + 0 + 8 + read-write + + + ESC_SEQ0_CHAR0 + This register stores the first char used to replace reg_esc_seq0 in data. + 8 + 8 + read-write + + + ESC_SEQ0_CHAR1 + This register stores the second char used to replace the reg_esc_seq0 in data + 16 + 8 + read-write + + + + + ESC_CONF2 + 0xB8 + 0x20 + 0x00DEDB11 + + + ESC_SEQ1 + This register stores the flow control char to turn on the flow_control + 0 + 8 + read-write + + + ESC_SEQ1_CHAR0 + This register stores the first char used to replace the reg_esc_seq1 in data. + 8 + 8 + read-write + + + ESC_SEQ1_CHAR1 + This register stores the second char used to replace the reg_esc_seq1 in data. + 16 + 8 + read-write + + + + + ESC_CONF3 + 0xBC + 0x20 + 0x00DFDB13 + + + ESC_SEQ2 + This register stores the flow_control char to turn off the flow_control + 0 + 8 + read-write + + + ESC_SEQ2_CHAR0 + This register stores the first char used to replace the reg_esc_seq2 in data. + 8 + 8 + read-write + + + ESC_SEQ2_CHAR1 + This register stores the second char used to replace the reg_esc_seq2 in data. + 16 + 8 + read-write + + + + + PKT_THRES + 0xC0 + 0x20 + 0x00000080 + + + PKT_THRS + when the amount of packet payload is greater than this value the process of receiving data is done. + 0 + 13 + read-write + + + + + DATE + 0xFC + 0x20 + 0x16041001 + + + DATE + version information + 0 + 32 + read-write + + + + + + + UHCI1 + Universal Host Controller Interface + 0x3FF4C000 + + UHCI1 + 13 + + + + \ No newline at end of file diff --git a/m5stick-nemo.ino b/m5stick-nemo.ino new file mode 100644 index 0000000..2f29c14 --- /dev/null +++ b/m5stick-nemo.ino @@ -0,0 +1,691 @@ +// Nemo Firmware for the M5 Stack Stick C Plus +// github.com/n0xa | IG: @4x0nn +#include +#include +#include +#include +#include "WORLD_IR_CODES.h" +#include +#include +#include + +String formattedDate; +String dayStamp; +String timeStamp; + +// globals for passing bluetooth info between routines +// AppleJuice Payload Data +uint8_t Airpods[31] = {0x1e, 0xff, 0x4c, 0x00, 0x07, 0x19, 0x07, 0x02, 0x20, 0x75, 0xaa, 0x30, 0x01, 0x00, 0x00, 0x45, 0x12, 0x12, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; +uint8_t AirpodsGen3[31] = {0x1e, 0xff, 0x4c, 0x00, 0x07, 0x19, 0x07, 0x13, 0x20, 0x75, 0xaa, 0x30, 0x01, 0x00, 0x00, 0x45, 0x12, 0x12, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; +uint8_t AirpodsProGen2[31] = {0x1e, 0xff, 0x4c, 0x00, 0x07, 0x19, 0x07, 0x14, 0x20, 0x75, 0xaa, 0x30, 0x01, 0x00, 0x00, 0x45, 0x12, 0x12, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; +uint8_t PowerBeats[31] = {0x1e, 0xff, 0x4c, 0x00, 0x07, 0x19, 0x07, 0x03, 0x20, 0x75, 0xaa, 0x30, 0x01, 0x00, 0x00, 0x45, 0x12, 0x12, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; +uint8_t BeatsX[31] = {0x1e, 0xff, 0x4c, 0x00, 0x07, 0x19, 0x07, 0x05, 0x20, 0x75, 0xaa, 0x30, 0x01, 0x00, 0x00, 0x45, 0x12, 0x12, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; +uint8_t BeatsStudioPro[31] = {0x1e, 0xff, 0x4c, 0x00, 0x07, 0x19, 0x07, 0x17, 0x20, 0x75, 0xaa, 0x30, 0x01, 0x00, 0x00, 0x45, 0x12, 0x12, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; +uint8_t* data; +BLEAdvertisementData oAdvertisementData = BLEAdvertisementData(); +BLEAdvertising *pAdvertising; + +#define EEPROM_SIZE 1 + +struct MENU { + char name[19]; + int command; +}; +int cursor = 0; +int rotation = 1; +bool rstOverride = false; + +/// SWITCHER /// +// Proc codes +// 0 - Clock +// 1 - Main Menu +// 2 - Settings Menu +// 3 - Clock set (not implemented yet) +// 4 - Dimmer Time adjustment +// 5 - TV B-GONE +// 6 - Battery info +// 7 - screen rotation +// 8 - AppleJuice Menu +// 9 - AppleJuice Advertisement + +bool isSwitching = true; +//int current_proc = 0; +int current_proc = 1; // Temp. override since we're disabling the clock for the time being + +void switcher_button_proc() { + if (rstOverride == false) { + if (digitalRead(M5_BUTTON_RST) == LOW) { + isSwitching = true; + current_proc = 1; + } + } +} + +bool screen_dim_dimmed = false; +int screen_dim_time = 30; +int screen_dim_current = 0; + +void screen_dim_proc() { + M5.Rtc.GetBm8563Time(); + // if one of the buttons is pressed, take the current time and add screen_dim_time on to it and roll over when necessary + if (digitalRead(M5_BUTTON_RST) == LOW || digitalRead(M5_BUTTON_HOME) == LOW) { + if (screen_dim_dimmed) { + screen_dim_dimmed = false; + M5.Axp.ScreenBreath(11); + } + int newtime = M5.Rtc.Second + screen_dim_time + 2; // hacky but needs a couple extra seconds added + + if (newtime >= 60) { + newtime = newtime - 60; + } + screen_dim_current = newtime; + } + if (screen_dim_dimmed == false) { + if (M5.Rtc.Second == screen_dim_current || (M5.Rtc.Second + 1) == screen_dim_current || (M5.Rtc.Second + 2) == screen_dim_current) { + M5.Axp.ScreenBreath(0); + screen_dim_dimmed = true; + } + } +} + +/// MAIN MENU /// +MENU mmenu[] = { +// { "clock", 0}, // disabled for now + { "TV B-GONE", 5}, + { "AppleJuice", 8}, + { "settings", 2}, +}; + +void mmenu_drawmenu() { + M5.Lcd.setTextSize(2); + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setCursor(0, 8, 1); + for ( int i = 0 ; i < ( sizeof(mmenu) / sizeof(MENU) ) ; i++ ) { + M5.Lcd.print((cursor == i) ? ">" : " "); + M5.Lcd.println(mmenu[i].name); + } +} + +void mmenu_setup() { + M5.Lcd.setRotation(rotation); + cursor = 0; + rstOverride = true; + mmenu_drawmenu(); + delay(250); // Prevent switching after menu loads up +} + +void mmenu_loop() { + if (digitalRead(M5_BUTTON_RST) == LOW) { + cursor++; + cursor = cursor % ( sizeof(mmenu) / sizeof(MENU) ); + mmenu_drawmenu(); + delay(250); + } + if (digitalRead(M5_BUTTON_HOME) == LOW) { + rstOverride = false; + isSwitching = true; + current_proc = mmenu[cursor].command; + } +} + +/// SETTINGS MENU /// +MENU smenu[] = { + { "set dim time", 4}, + { "battery info", 6}, + { "rotation", 7}, + { "back", 1}, +}; + +void smenu_drawmenu() { + M5.Lcd.setTextSize(2); + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setCursor(0, 8, 1); + for ( int i = 0 ; i < ( sizeof(smenu) / sizeof(MENU) ) ; i++ ) { + M5.Lcd.print((cursor == i) ? ">" : " "); + M5.Lcd.println(smenu[i].name); + } +} + +void smenu_setup() { + M5.Lcd.setRotation(rotation); + cursor = 0; + rstOverride = true; + smenu_drawmenu(); + delay(250); // Prevent switching after menu loads up +} + +void smenu_loop() { + if (digitalRead(M5_BUTTON_RST) == LOW) { + cursor++; + cursor = cursor % ( sizeof(smenu) / sizeof(MENU) ); + smenu_drawmenu(); + delay(250); + } + if (digitalRead(M5_BUTTON_HOME) == LOW) { + rstOverride = false; + isSwitching = true; + current_proc = smenu[cursor].command; + } +} + +/// Dimmer MENU /// +MENU dmenu[] = { + { "30 seconds", 30}, + { "25 seconds", 25}, + { "20 seconds", 20}, + { "15 seconds", 15}, + { "10 seconds", 10}, + { "5 seconds", 5}, + { "back", screen_dim_time}, +}; + +void dmenu_drawmenu() { + M5.Lcd.setTextSize(2); + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setCursor(0, 8, 1); + for ( int i = 0 ; i < ( sizeof(dmenu) / sizeof(MENU) ) ; i++ ) { + M5.Lcd.print((cursor == i) ? ">" : " "); + M5.Lcd.println(dmenu[i].name); + } +} + +void dmenu_setup() { + M5.Lcd.setRotation(rotation); + cursor = 0; + rstOverride = true; + dmenu_drawmenu(); + delay(250); // Prevent switching after menu loads up +} + +void dmenu_loop() { + if (digitalRead(M5_BUTTON_RST) == LOW) { + cursor++; + cursor = cursor % ( sizeof(dmenu) / sizeof(MENU) ); + dmenu_drawmenu(); + delay(250); + } + if (digitalRead(M5_BUTTON_HOME) == LOW) { + rstOverride = false; + isSwitching = true; + screen_dim_time = dmenu[cursor].command; + current_proc = 2; + } +} + +/// Rotation MENU /// +MENU rmenu[] = { + { "Right", 1}, + { "Left", 3}, + { "back", rotation}, +}; + +void rmenu_drawmenu() { + M5.Lcd.setTextSize(2); + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setCursor(0, 8, 1); + for ( int i = 0 ; i < ( sizeof(rmenu) / sizeof(MENU) ) ; i++ ) { + M5.Lcd.print((cursor == i) ? ">" : " "); + M5.Lcd.println(rmenu[i].name); + } +} + +void rmenu_setup() { + M5.Lcd.setRotation(rotation); + cursor = 0; + rstOverride = true; + rmenu_drawmenu(); + delay(250); // Prevent switching after menu loads up +} + +void rmenu_loop() { + if (digitalRead(M5_BUTTON_RST) == LOW) { + cursor++; + cursor = cursor % ( sizeof(rmenu) / sizeof(MENU) ); + rmenu_drawmenu(); + delay(250); + } + if (digitalRead(M5_BUTTON_HOME) == LOW) { + rstOverride = false; + isSwitching = true; + rotation = rmenu[cursor].command; + EEPROM.write(0, rotation); + EEPROM.commit(); + current_proc = 2; + } +} + +void battery_drawmenu(int battery, int b, int c) { + M5.Lcd.setTextSize(2); + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setCursor(0, 8, 1); + M5.Lcd.print("Battery: "); + M5.Lcd.print(battery); + M5.Lcd.println("%"); + M5.Lcd.print("DeltaB: "); + M5.Lcd.println(b); + M5.Lcd.print("DeltaC: "); + M5.Lcd.println(c); + M5.Lcd.println(""); + M5.Lcd.println("Press any button to exit"); +} +void battery_setup() { + M5.Lcd.setRotation(rotation); + rstOverride = false; + float c = M5.Axp.GetVapsData() * 1.4 / 1000; + float b = M5.Axp.GetVbatData() * 1.1 / 1000; + int battery = ((b - 3.0) / 1.2) * 100; + battery_drawmenu(battery, b, c); + delay(250); // Prevent switching after menu loads up +} + +void battery_loop() { + delay(300); + float c = M5.Axp.GetVapsData() * 1.4 / 1000; + float b = M5.Axp.GetVbatData() * 1.1 / 1000; + int battery = ((b - 3.0) / 1.2) * 100; + battery_drawmenu(battery, b, c); + if (digitalRead(M5_BUTTON_HOME) == LOW) { + rstOverride = false; + isSwitching = true; + current_proc = 1; + } +} + +/// TV-B-GONE /// +void xmitCodeElement(uint16_t ontime, uint16_t offtime, uint8_t PWM_code ); +void quickflashLEDx( uint8_t x ); +void delay_ten_us(uint16_t us); +void quickflashLED( void ); +uint8_t read_bits(uint8_t count); +uint16_t rawData[300]; +#define MAX_WAIT_TIME 65535 //tens of us (ie: 655.350ms) +IRsend irsend(IRLED); // Set the GPIO to be used to sending the message. +extern const IrCode* const NApowerCodes[]; +extern const IrCode* const EUpowerCodes[]; +extern uint8_t num_NAcodes, num_EUcodes; +uint8_t bitsleft_r = 0; +uint8_t bits_r = 0; +uint8_t code_ptr; +volatile const IrCode * powerCode; +uint8_t read_bits(uint8_t count) +{ + uint8_t i; + uint8_t tmp = 0; + for (i = 0; i < count; i++) { + if (bitsleft_r == 0) { + bits_r = powerCode->codes[code_ptr++]; + bitsleft_r = 8; + } + bitsleft_r--; + tmp |= (((bits_r >> (bitsleft_r)) & 1) << (count - 1 - i)); + } + return tmp; +} +#define BUTTON_PRESSED LOW +#define BUTTON_RELEASED HIGH +uint16_t ontime, offtime; +uint8_t i, num_codes; +uint8_t region; + +void tvbgone_setup() { + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setTextSize(4); + M5.Lcd.setCursor(5, 1); + M5.Lcd.println("TV-B-Gone"); + irsend.begin(); + // Hack: Set IRLED high to turn it off after setup. Otherwise it stays on (active low) + digitalWrite(IRLED, HIGH); + + delay_ten_us(5000); + if (digitalRead(REGIONSWITCH)) { + region = NA; + M5.Lcd.println("Region: NA"); + } + else { + region = EU; + M5.Lcd.println("Region: EU"); + } + delay(1000); // Give time after loading +} + +void sendAllCodes() +{ + bool endingEarly = false; //will be set to true if the user presses the button during code-sending + if (digitalRead(REGIONSWITCH)) { + region = NA; + num_codes = num_NAcodes; + } + else { + region = EU; + num_codes = num_EUcodes; + } + for (i = 0 ; i < num_codes; i++) + { + if (region == NA) { + powerCode = NApowerCodes[i]; + } + else { + powerCode = EUpowerCodes[i]; + } + const uint8_t freq = powerCode->timer_val; + const uint8_t numpairs = powerCode->numpairs; + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setTextSize(4); + M5.Lcd.setCursor(5, 1); + M5.Lcd.println("TV-B-Gone"); + M5.Lcd.setTextSize(2); + const uint8_t bitcompression = powerCode->bitcompression; + code_ptr = 0; + for (uint8_t k = 0; k < numpairs; k++) { + uint16_t ti; + ti = (read_bits(bitcompression)) * 2; + offtime = powerCode->times[ti]; // read word 1 - ontime + ontime = powerCode->times[ti + 1]; // read word 2 - offtime + M5.Lcd.setTextSize(1); + M5.Lcd.printf("rti = %d Pair = %d, %d\n", ti >> 1, ontime, offtime); + rawData[k * 2] = offtime * 10; + rawData[(k * 2) + 1] = ontime * 10; + yield(); + } + irsend.sendRaw(rawData, (numpairs * 2) , freq); + // Hack: Set IRLED high to turn it off after each burst. Otherwise it stays on (active low) + digitalWrite(IRLED, HIGH); + yield(); + bitsleft_r = 0; + delay_ten_us(20500); + if (digitalRead(TRIGGER) == BUTTON_PRESSED) + { + while (digitalRead(TRIGGER) == BUTTON_PRESSED) { + yield(); + } + endingEarly = true; + delay_ten_us(50000); //500ms delay + quickflashLEDx(4); + delay_ten_us(MAX_WAIT_TIME); // wait 655.350ms + delay_ten_us(MAX_WAIT_TIME); // wait 655.350ms + break; //exit the POWER code "for" loop + } + } + if (endingEarly == false) + { + delay_ten_us(MAX_WAIT_TIME); // wait 655.350ms + delay_ten_us(MAX_WAIT_TIME); // wait 655.350ms + quickflashLEDx(8); + } +} + +void tvbgone_loop() +{ + if (digitalRead(TRIGGER) == BUTTON_PRESSED) + { + delay_ten_us(40000); + while (digitalRead(TRIGGER) == BUTTON_PRESSED) { + delay_ten_us(500); + yield(); + } + sendAllCodes(); + } + yield(); +} + +void delay_ten_us(uint16_t us) { + uint8_t timer; + while (us != 0) { + for (timer = 0; timer <= DELAY_CNT; timer++) { + NOP; + NOP; + } + NOP; + us--; + } +} + +void quickflashLED( void ) { + digitalWrite(LED, LOW); + delay_ten_us(3000); // 30 ms ON-time delay + digitalWrite(LED, HIGH); +} + +void quickflashLEDx( uint8_t x ) { + quickflashLED(); + while (--x) { + delay_ten_us(25000); // 250 ms OFF-time delay between flashes + quickflashLED(); + } +} + +/// CLOCK /// +void clock_setup() { + M5.Lcd.setRotation(rotation); + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setTextSize(3); +} + +void clock_loop() { + M5.Rtc.GetBm8563Time(); + M5.Lcd.setCursor(40, 40, 2); + M5.Lcd.printf("%02d:%02d:%02d\n", M5.Rtc.Hour, M5.Rtc.Minute, M5.Rtc.Second); + delay(250); +} + +/// ENTRY /// +void setup() { + M5.begin(); + M5.Axp.ScreenBreath(11); // Brightness + M5.Lcd.setRotation(rotation); + M5.Lcd.setTextColor(GREEN, BLACK); + EEPROM.begin(EEPROM_SIZE); + rotation = EEPROM.read(0); + + // Boot Screen + digitalWrite(M5_LED, HIGH); //LEDOFF + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setTextSize(3); + M5.Lcd.setCursor(5, 10); + M5.Lcd.setRotation(rotation); + M5.Lcd.print("M5-NEMO\n"); + M5.Lcd.setTextSize(2); + M5.Lcd.print("For M5StickC-Plus\nBy Axon | IG: @4x0nn"); + // Pin setup + pinMode(M5_LED, OUTPUT); + pinMode(M5_BUTTON_HOME, INPUT); + pinMode(M5_BUTTON_RST, INPUT); + + // Random seed + randomSeed(analogRead(0)); + + // Create the BLE Server + BLEDevice::init(""); + BLEServer *pServer = BLEDevice::createServer(); + pAdvertising = pServer->getAdvertising(); + BLEAdvertisementData oAdvertisementData = BLEAdvertisementData(); + + // Finish with time to show logo + delay(3000); +} + +MENU ajmenu[] = { + { "AirPods", 1}, + { "AirPodsGen3", 2}, + { "AirPodsProGen2", 3}, + { "PowerBeats", 4}, + { "Beats X", 5}, + { "BeatsStudioPro", 6}, + { "back", 7}, +}; + +void aj_drawmenu() { + M5.Lcd.setTextSize(2); + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setCursor(0, 8, 1); + for ( int i = 0 ; i < ( sizeof(ajmenu) / sizeof(MENU) ) ; i++ ) { + M5.Lcd.print((cursor == i) ? ">" : " "); + M5.Lcd.println(ajmenu[i].name); + } +} + +void aj_setup(){ + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setTextSize(3); + M5.Lcd.setCursor(5, 1); + M5.Lcd.println("AppleJuice"); + delay(1000); + cursor = 0; + rstOverride = true; + aj_drawmenu(); +} + +void aj_loop(){ + + if (digitalRead(M5_BUTTON_RST) == LOW) { + cursor++; + cursor = cursor % ( sizeof(ajmenu) / sizeof(MENU) ); + aj_drawmenu(); + delay(250); + } + if (digitalRead(M5_BUTTON_HOME) == LOW) { + int deviceType = ajmenu[cursor].command; + // Also borrowed heavily from ronaldstoner / ECTO-1A esp32 AppleJuice + //uint8_t* data; + switch(deviceType) { + case 1: + data = Airpods; + break; + case 2: + data = AirpodsGen3; + break; + case 3: + data = AirpodsProGen2; + break; + case 4: + data = PowerBeats; + break; + case 5: + data = BeatsX; + break; + case 6: + data = BeatsStudioPro; + break; + case 7: + rstOverride = false; + isSwitching = true; + current_proc = 1; + break; + } + if (current_proc == 8 && isSwitching == false){ + M5.Lcd.setRotation(rotation); + M5.Lcd.fillScreen(BLACK); + M5.Lcd.setTextSize(3); + M5.Lcd.setCursor(5, 1); + M5.Lcd.println("AppleJuice"); + M5.Lcd.setTextSize(2); + M5.Lcd.print("Advertising:\n"); + M5.Lcd.print(ajmenu[cursor].name); + M5.Lcd.print("\n\nHold Side Key: Exit"); + isSwitching = true; + current_proc = 9; // Jump over to the AppleJuice BLE beacon loop +// while(true) { +// // of the background stuff easier (menu button, dimmer, etc) +// BLEAdvertisementData oAdvertisementData = BLEAdvertisementData(); +// oAdvertisementData.addData(std::string((char*)data, sizeof(Airpods))); +// pAdvertising->setAdvertisementData(oAdvertisementData); +// pAdvertising->start(); +// digitalWrite(M5_LED, LOW); //LED ON on Stick C Plus +// delay(50); +// digitalWrite(M5_LED, HIGH); //LED OFF on Stick C Plus +// delay(950); // 1 second between beacons when combined with LED On delay above for brightness +// pAdvertising->stop(); +// } + } + } +} + +void aj_adv_setup(){ + rstOverride = false; +} + +void aj_adv(){ + // run the advertising loop + // Isolating this to its own process lets us take advantage + // of the background stuff easier (menu button, dimmer, etc) + BLEAdvertisementData oAdvertisementData = BLEAdvertisementData(); + oAdvertisementData.addData(std::string((char*)data, sizeof(Airpods))); + pAdvertising->setAdvertisementData(oAdvertisementData); + pAdvertising->start(); + digitalWrite(M5_LED, LOW); //LED ON on Stick C Plus + delay(50); + digitalWrite(M5_LED, HIGH); //LED OFF on Stick C Plus + delay(950); // 1 second between beacons when combined with LED On delay above for brightness + pAdvertising->stop(); +} + +void loop() { + // This is the code to handle running the main loops + // Background processes + switcher_button_proc(); + screen_dim_proc(); + + // Switcher + if (isSwitching) { + isSwitching = false; + switch (current_proc) { + case 0: + clock_setup(); + break; + case 1: + mmenu_setup(); + break; + case 2: + smenu_setup(); + break; + case 4: + dmenu_setup(); + break; + case 5: + tvbgone_setup(); + break; + case 6: + battery_setup(); + break; + case 7: + rmenu_setup(); + break; + case 8: + aj_setup(); + break; + case 9: + aj_adv_setup(); + break; + } + } + + switch (current_proc) { + case 0: + clock_loop(); + break; + case 1: + mmenu_loop(); + break; + case 2: + smenu_loop(); + break; + case 4: + dmenu_loop(); + break; + case 5: + tvbgone_loop(); + break; + case 6: + battery_loop(); + break; + case 7: + rmenu_loop(); + break; + case 8: + aj_loop(); + break; + case 9: + aj_adv(); + break; + } +} diff --git a/tvbg.h b/tvbg.h new file mode 100644 index 0000000..a3896f8 --- /dev/null +++ b/tvbg.h @@ -0,0 +1,49 @@ +/* +Last Updated: 30 Mar. 2018 +By Anton Grimpelhuber (anton.grimpelhuber@gmail.com) +*/ + +// The TV-B-Gone for Arduino can use either the EU (European Union) or the NA (North America) database of POWER CODES +// EU is for Europe, Middle East, Australia, New Zealand, and some countries in Africa and South America +// NA is for North America, Asia, and the rest of the world not covered by EU + +// Two regions! +#define NA 0 //set by a HIGH on REGIONSWITCH pin +#define EU 1 //set by a LOW on REGIONSWITCH pin + +// What pins do what +#define LED 10 //LED indicator pin (built-in LED) +#define IRLED 9 //the IR sender LED / D5 on wemos D1 mini +#define TRIGGER 37 //the button pin / D6 on wemos D1 mini +#define REGIONSWITCH 39 //HIGH (1) = NA, LOW (0) = EU; Pin 5 / D1 (REGIONSWITCH) is HIGH (via in input pullup resistor) for North America, or you (the user) must wire it to ground to set the codes for Europe. + +// Lets us calculate the size of the NA/EU databases +#define NUM_ELEM(x) (sizeof (x) / sizeof (*(x))); + +// set define to 0 to turn off debug output +#define DEBUG 0 +#define DEBUGP(x) if (DEBUG == 1) { x ; } + +// Shortcut to insert single, non-optimized-out nop +#define NOP __asm__ __volatile__ ("nop") + +// Not used any more on esp8266, so don't bother +// Tweak this if neccessary to change timing +// -for 8MHz Arduinos, a good starting value is 11 +// -for 16MHz Arduinos, a good starting value is 25 +#define DELAY_CNT 25 + +// Makes the codes more readable. the OCRA is actually +// programmed in terms of 'periods' not 'freqs' - that +// is, the inverse! +// #define freq_to_timerval(x) (F_CPU / 8 / x - 1) +#define freq_to_timerval(x) (x / 1000) + +// The structure of compressed code entries +struct IrCode { + uint8_t timer_val; + uint8_t numpairs; + uint8_t bitcompression; + uint16_t const *times; + uint8_t const *codes; +};